Database Users

Updating firmware and root?

Hi guys,
I know how rooting and flashing works but I've been using HTC devices since the nexus one so there are some differences I just want to make sure of. I got my 6P yesterday, I unlocked the bootloader and flashed TWRP. I wanted to gain root but Im not sure about flashing the modified boot img and the vendor thing.
My build was K but I got an OTA before unlocking the bootloader which updated to L. Anyway I don't know why I just formatted every thing in TWRP instead of the factory reset and I lost the OS X_X I tried to restore my nandroid with no luck. Anyway I got the factory img (MDB08L) from google dev and flashed used 'flash-all.bat' in the bootloader, the phone is running fine right now but I would like to update to the latest firmware 6.0.1+root since im not getting any OTA.
I would like to install CleanCore(6.0.1), the guide is
-> Flash Bootloader & Radio (as needed)
-> Flash CleanCore
-> Flash Modified Boot (named angler-xxxxxx-boot.zip)
-> Flash SuperSU or SuperSU Beta
-> Flash latest vendor.img (ROM & Vendor builds need to match!)
1. Should I use MMB29M factory img and flash 'flash-all.bat' like I did with the L build for the first step? then I flash new recovery?
-Flashing the rom through the recovery
2. so after I flash the rom I boot into the bootloader and flash the modified boot img with fastboot flash boot boot.img right?
3. then I go back to recovery and flash SU which I should download before.
4. vendor img is flashed in recovery too or fastboot?
Sorry for the hassle I just want to make sure.
One more thing, in this guide http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928 at step 9, OP flashes the factroy img files separately (bootloader,radio,etc), is there a problem with using flashall.bat?
Thanks in advance and sorry for my noobish questions.

If you want to keep your data while doing this process, then yes, using the flash-all.bat is a problem. However, if you are fine with reverting back to stock(where you have to activate Android and reinstall all of your apps) then the flash-all.bat file is just fine.
That guide in the thread you linked walks you through how to update without losing data. After doing all of that, you'll just need to install TWRP and SuperSU again(do the latest systemless supersu though)

Enddo said:
If you want to keep your data while doing this process, then yes, using the flash-all.bat is a problem. However, if you are fine with reverting back to stock(where you have to activate Android and reinstall all of your apps) then the flash-all.bat file is just fine.
That guide in the thread you linked walks you through how to update without losing data. After doing all of that, you'll just need to install TWRP and SuperSU again(do the latest systemless supersu though)
Click to expand...
Click to collapse
Thanks for the help.
I have rooted my stock rom and gained root. I also installed exposed so i'll be fine without a custom rom for some time. There has been a report that some cameras aren't working on 6.0.1 with root so I'll wait for a while.
Thanks again

mr.dj26 said:
Thanks for the help.
I have rooted my stock rom and gained root. I also installed exposed so i'll be fine without a custom rom for some time. There has been a report that some cameras aren't working on 6.0.1 with root so I'll wait for a while.
Thanks again
Click to expand...
Click to collapse
I'm pretty sure those reports are because they used the SuperSU root method that didn't auto patch the boot image(which is the version(or two versions) behind the current version of SuperSU). This is happening because people are updating to 6.0.1, but the patched SuperSU boot image is for 6.0 and the 6.0 boot image conflicts with 6.0.1
As long as you use the latest version of SuperSU then you won't have any trouble with the camera

Enddo said:
I'm pretty sure those reports are because they used the SuperSU root method that didn't auto patch the boot image(which is the version(or two versions) behind the current version of SuperSU). This is happening because people are updating to 6.0.1, but the patched SuperSU boot image is for 6.0 and the 6.0 boot image conflicts with 6.0.1
As long as you use the latest version of SuperSU then you won't have any trouble with the camera
Click to expand...
Click to collapse
Thanks for the info

Rooting OREO (41.3.A.2.24)

I was waiting for a root enabler for oreo (41.3.A.2.24), and I could find https://forum.xda-developers.com/xperia-x-performance/how-to/guide-stock-kernel-root-twrp-drm-fix-41-t3711837.
But this link is for version 41.3.A.0.401 and it does not work for everybody including me.
Since androplus still didn't bring out a new version of his kernel I tried the method from the above link.
But I'm using newer versions than in the description, I use TWRP 3.2.0, Magisk manager 5.2.2 and Magisk 15.2.
I can install the new version, twrp, the new boor image and Magisk 15.2.
I can boot and Magisk runs but the Safetynet control failes and Magisk does not enable root.
On the installation of the boot image, twrp and magisk I got some messages (marked in red)
unable to mount storage
failed to mount
Before I tried with magisk manager 5.5.1 and magisk 15.1 but then I got stuck at boot time at the sony logo.
Does anybody have a way to root Oreo (the latest version), enable DRM and enable root?

Ok I started all over again and I noticed I didn't follow the procedure first time.
So I excluded the FOTA kernel but whatever else I check no full wipe is done, I can always see the previous installed apps, it does not matter if I check Cust-reset, master-reset or reset-wipe-reason, the system is not wiped.
So that's my first problem, how to wipe the previous install.
Flashing the rom seems to be OK, same thing for flashing boot_oreo.img and twrp-3.1.1-0-dora.img.
I'm not sure about twrp 3.2.0.0 because this version is off-line now, so I tried with TWRP 3.1.1.0 and 3.2.1.0 but they all gave me the same result.
Problems start when I have to flash drmfix.zip, safety-net cleaner or magisk 15.2. The procedure tells me the flash is ok but have a look at thet attached images, I get errors while flashing. One picture for drmfix, one for safety-net-cleaner and one for magisk 15.2
After flashing all of this I can boot successfully but when I try to get root in ES File Explorer pro, it does not work. When I go into Magisk and try the afety-net check I get ctsProfile false and basicIntegrity False.
So the rom does work but I do not get root.
I tried all of this with the Italian rom 41.3.A.2.24.R1E ? I can start all over again with the UK version 41.3.A.2.24.R2E but I do not know if this makes any sense.
So can anybody tell me what to do to get it all going?

deboopi2 said:
I was waiting for a root enabler for oreo (41.3.A.2.24), and...
Click to expand...
Click to collapse
1 - Do use always Adrian DC latest fully working TWRP build for dora.
2 - You don't need a 3rd party kernel to achieve that, instead, you can easily create your own one, based always on stock kernel!

Thats the SELinux's problem.
Flash this first then flash magisk
https://forum.xda-developers.com/xp...ment/mod-sony-stock-patcher-xperia-x-t3528148

Oneplus 5 TWRP and Root Issues

Oneplus 5, Official ROM, H2OS, Android 7.1
1. First time, I followed https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877 and successfully install TWRP and root using Supersu. I can goes into TWRP recovery without any problem. I notice that the supersu I installed in a systemless one, some apps can't get root access, like AD Away, Titanium Backup. But most apps can work with it. I used the one of the two root method in that tutorial as follows:
For Users who want to remain Encrypted:
1. Boot into TWRP Recovery and allow system modifications.
2. Swipe right and enable modifications.
3. Select your preferred Language, Tap “Never show this screen on boot again,” and Swipe allow modification.
4. Navigate to Install and select Magisk Or SuperSU to root OnePlus 5.
5. Swipe to confirm the flash
6. Reboot System
Click to expand...
Click to collapse
2. After several months I want to upgrade the original H2OS to new version, so I unroot in Supersu first, when it ask me if I want to recover Boot Image, I say "Yes", and say "NO" when ask me if I want to recover Recovery Image. Then I upgrade to the new H2OS v13 (Android 7.1) using the Full package through TWRP, after that I reinstall TWRP 3.2.1, it was successful. But it doesn't ask me to allow it to make modification. I tried to install Supersu 2.82 and 2.82 SR5 using the same method as in tutorial, at the end of "Booting Image patcher" it shows
.........
-Calling user ramdisk patch script
---Failure, aborting
-Unmounting /system and /vender
-Done
Click to expand...
Click to collapse
Then I reboot to recovery, it return to official REC, not TWRP, and system says there is no root.

netsonic said:
Oneplus 5, Official ROM, H2OS, Android 7.1
1. First time, I followed https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877 and successfully install TWRP and root using Supersu. I can goes into TWRP recovery without any problem. I notice that the supersu I installed in a systemless one, some apps can't get root access, like AD Away, Titanium Backup. But most apps can work with it. I used the one of the two root method in that tutorial as follows:
2. After several months I want to upgrade the original H2OS to new version, so I unroot in Supersu first, when it ask me if I want to recover Boot Image, I say "Yes", and say "NO" when ask me if I want to recover Recovery Image. Then I upgrade to the new H2OS v13 (Android 7.1) using the Full package through TWRP, after that I reinstall TWRP 3.2.1, it was successful. But it doesn't ask me to allow it to make modification. I tried to install Supersu 2.82 and 2.82 SR5 using the same method as in tutorial, at the end of "Booting Image patcher" it shows
Then I reboot to recovery, it return to official REC, not TWRP, and system says there is no root.
Click to expand...
Click to collapse
Just use the latest universal codeworks recovery and flash it via fastboot.
For root i suggest use of Magisk over Su, the latest 15.3 works fine for me.

What is the codeworks recovery? Is it "twrp-3.2.1-0-cheeseburger.img" on https://twrp.me/oneplus/oneplus5.html?

netsonic said:
What is the codeworks recovery? Is it "twrp-3.2.1-0-cheeseburger.img" on https://twrp.me/oneplus/oneplus5.html?
Click to expand...
Click to collapse
No, it's the -universal- one from here https://forum.xda-developers.com/on...overy-twrp-3-2-1-0-oreo-oxygenos-5-0-t3725723

I can flash universal TWRP and Magisk 15.3. But Magisk show "SafetyNet API Error"? How to fix it?

D802 any root methods are not working!

hi ppl
it was rooted before. used twrp and some custom roms. but later it unrooted somehow.
I tried flashing super su, magisk and ioroot. supersu and magisk turn with an error msg
io root made it stuck on bootloader animation so I flashed a backup.
how to root it?
thx in advance

1) flash latest twrp http://www.gregtwallace.com/lgg2-projects/twrp/ - then reboot into twrp
2) made absolutely all wipes incl internal and data (delete all stuff) - then reboot into twrp
3) connect to usb - and simply copy rom, gapps, and root solution what you want to flash
latest stable magisk for twrp - https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
latest supersu for twrp - Recovery Flashable.zip http://www.supersu.com/download
3) flash the rom what you wanted and flash gapps
3) flash magisk or supersu
(if android 7.1.2 or higher of course - I recommend magisk, because of working nfc pay features, a lot of great systemless addons etc...)
if you prefer old lollipop rom (for example CloudyG2_3.3 ) - it supersu only.
This is the correct sequence - which will eliminate problems with the firmware. If you deleted and installed the root earlier (as you say)
I tried flashing super su, magisk and ioroot. supersu and magisk turn with an error msg
Click to expand...
Click to collapse
jeezes)) you already killed the rom.... and then restore the all this restores backup, this is a "dirty flash" with a bunch of "remnants". I recommend to do clean flash it in the specified sequence and everything will be ok.
You will spend a couple of 1-2 hours only on installing (and setting) completely all applications. It is not so difficult. But it will save you from a bunch of nonsense questions...
If you actually don't have TWRP recovery installed or old Kit kat Rom - this is absolutely another question and the instructions will not work for you. Also, Kit Kat and Lollipop based ROMs does not support Magisk - because of this error.

zemix said:
1) flash latest twrp http://www.gregtwallace.com/lgg2-projects/twrp/ - then reboot into twrp
2) made absolutely all wipes incl internal and data (delete all stuff) - then reboot into twrp
3) connect to usb - and simply copy rom, gapps, and root solution what you want to flash
latest stable magisk for twrp - https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
latest supersu for twrp - Recovery Flashable.zip http://www.supersu.com/download
3) flash the rom what you wanted and flash gapps
3) flash magisk or supersu
(if android 7.1.2 or higher of course - I recommend magisk, because of working nfc pay features, a lot of great systemless addons etc...)
if you prefer old lollipop rom (for example CloudyG2_3.3 ) - it supersu only.
This is the correct sequence - which will eliminate problems with the firmware. If you deleted and installed the root earlier (as you say)
jeezes)) you already killed the rom.... and then restore the all this restores backup, this is a "dirty flash" with a bunch of "remnants". I recommend to do clean flash it in the specified sequence and everything will be ok.
You will spend a couple of 1-2 hours only on installing (and setting) completely all applications. It is not so difficult. But it will save you from a bunch of nonsense questions...
If you actually don't have TWRP recovery installed or old Kit kat Rom - this is absolutely another question and the instructions will not work for you. Also, Kit Kat and Lollipop based ROMs does not support Magisk - because of this error.
Click to expand...
Click to collapse
thx bro. I did all the steps but it seems same problem going on. sure I want the latest of everything. better updated all. so, using the latest twrp, I wipe all data then format all data then again wipe everything
this aosp rom and gapps worked perfectly. then flashed teh magisk but again its unrooted.
it installs magisk perfectly but root checker says its not rooted. anyway thx for help
btw, aosp rom android 9 has a bluetooth bug. giving a bluetooth stopped message every 10 seconds.

so any advice anout that problem?

you must grant root permission when popup (magisk) appears.
its not automatically
popup similar as in supersu
root works excellent on d802 with Magisk
for example Es File Explorer or any Root Checker
---------- Post added at 17:12 ---------- Previous post was at 17:10 ----------
I use 7.1.2 android based AospExtended v 4.6
because latest pie rom has bugs and not stable

Screenshot https://i.imgur.com/6IcIvJx.jpg

slabongrade said:
thx bro. I did all the steps but it seems same problem going on. sure I want the latest of everything. better updated all. so, using the latest twrp, I wipe all data then format all data then again wipe everything
this aosp rom and gapps worked perfectly. then flashed teh magisk but again its unrooted.
it installs magisk perfectly but root checker says its not rooted. anyway thx for help
btw, aosp rom android 9 has a bluetooth bug. giving a bluetooth stopped message every 10 seconds.
Click to expand...
Click to collapse
flash magisk.zip and install magisk.apk to root android 9

zemix said:
you must grant root permission when popup (magisk) appears.
its not automatically
popup similar as in supersu
root works excellent on d802 with Magisk
for example Es File Explorer or any Root Checker
---------- Post added at 17:12 ---------- Previous post was at 17:10 ----------
I use 7.1.2 android based AospExtended v 4.6
because latest pie rom has bugs and not stable
Click to expand...
Click to collapse
zemix said:
Screenshot https://i.imgur.com/6IcIvJx.jpg
Click to expand...
Click to collapse
elffoh said:
flash magisk.zip and install magisk.apk to root android 9
Click to expand...
Click to collapse
zemix said:
you must grant root permission when popup (magisk) appears.
its not automatically
popup similar as in supersu
root works excellent on d802 with Magisk
for example Es File Explorer or any Root Checker
---------- Post added at 17:12 ---------- Previous post was at 17:10 ----------
I use 7.1.2 android based AospExtended v 4.6
because latest pie rom has bugs and not stable
Click to expand...
Click to collapse
zemix said:
Screenshot https://i.imgur.com/6IcIvJx.jpg
Click to expand...
Click to collapse
elffoh said:
flash magisk.zip and install magisk.apk to root android 9
Click to expand...
Click to collapse
I used supersu and it turned out to be "certification verify" problem. OS not running because of this problem but says rooted. so I can still reach twrp but it really become annoying. this is my old phone and will use as 2nd in my Thailand trip soon.
what to do now? can I use unrooted with a sim card? with no problem?

Please, don't use this nonsense "overquoting" when you answer to someone. Have some respect to the forum rules, and users.
if you want stable rom for LGG2-D802 flash
1) aosp extended based on 7.1.2 or 8.1 versions of Android.
2) flash gapps nano
3) flash magisk zip
4) after rom starts - do the first quick settings - then open Magisk (and if needed update the Magisk manager)
Do not flash both (supersu and magisk) risk to brick the phone.
"device not certified" messege will be always if you use Supersu. It's obviously. Using supersu you unable to use apps like Google pay or any banking apps, because of system root.
Magisk is systemless solution, that's why Google do not recognize Magisk's root. And Play Store on about screen always show "Your device is certified". Also you can Hide root from some apps using Hide option in Magisk manager (it's very useful for local banking apps).
I have a suspicion that you used an older version of Android KitKat (official). And now you try to flash a new Rom (above the Android 7.1.2+). You can't do this. Because you must have Lollipop bootloader. You must be an Android Lillipop first. And then (get Root, then TWRP). And after all that - you will be able to flash some of Rom we are talking about.

zemix said:
Please, don't use this nonsense "overquoting" when you answer to someone. Have some respect to the forum rules, and users.
if you want stable rom for LGG2-D802 flash
1) aosp extended based on 7.1.2 or 8.1 versions of Android.
2) flash gapps nano
3) flash magisk zip
4) after rom starts - do the first quick settings - then open Magisk (and if needed update the Magisk manager)
Do not flash both (supersu and magisk) risk to brick the phone.
"device not certified" messege will be always if you use Supersu. It's obviously. Using supersu you unable to use apps like Google pay or any banking apps, because of system root.
Magisk is systemless solution, that's why Google do not recognize Magisk's root. And Play Store on about screen always show "Your device is certified". Also you can Hide root from some apps using Hide option in Magisk manager (it's very useful for local banking apps).
I have a suspicion that you used an older version of Android KitKat (official). And now you try to flash a new Rom (above the Android 7.1.2+). You can't do this. Because you must have Lollipop bootloader. You must be an Android Lillipop first. And then (get Root, then TWRP). And after all that - you will be able to flash some of Rom we are talking about.
Click to expand...
Click to collapse
Oh Finally!
dowloaded aosp 8.1 and all done. I was trying to use android 9 to be updated. But, pie becoming to be a "creampie" to me so I listened your word. and did it
just opened recovery mode and deleted all the zips. and copied new ones and flashed in order
1) aosp extended 8.1
2) open gapps nano for 8
3) magisk beta (yes this time I tried beta ver and it worked!)
after settings etc. checked with root checker and it was ok. so magisk.apk is not necessary now
thx again bro

Can't Root Samsung SM-T380

Hello,
I was wondering if the T380 is rootable?
I tried to follow [TWRP 3.2.1-1] [ROOT] Tab A SM-T380/T385 - 10/02/2018 but it didn't work ( as I assume) since the guide is quite old. I also tried patching the boot.img using the magisk tutorial but I end up with the Installed: N\A Ramdisk: Yes A\B & Sars: no.
I can't also downgrade since I have the latest 2021 patch and the binary is 4 while the version below that is on 3. ROM STOCK
PS: I can install TWRP without any problems, the only issue is rooting with magisk
Any help or suggestion really appreciated.

This is exactly the same problem that I've been having with my T380. I've flashed the stock rom and retried many different methods of rooting with Magisk but they all have failed. If you got it workiing, please tell me what made it work for you. Thanks!
These are the steps that I took using post by Winston Churchill as a guide:
1. Enable OEM Unlock
2. Use Odin to flash TWRP with twrp_3.2.3-1_sm-t380_oo_4119.tar on AP Slot
3. TWRP Wipe/Reformat Data then reboot to recovery
4. Install boot.img patched by Magisk using TWRP (I extracted boot.img from stock firmware and used Magisk to make patched boot.img)
5. Install Magisk.zip using TWRP (this didn't do anything, I had to manually install the apk later on)
6. Install Tab_A_2017_Pie_forced+encryption_disabler.zip using TWRP
7. Wipe Cache and Dalvik
8. Reboot System
I tried alternative approach for installing Magisk using this guide. It basically is extracting boot.img off your current device firmware and using Magisk to patch that boot.img. Then flash the patched boot.img using TWRP (it didn't work for me though)
These are the places I went to get my files:
https://forum.xda-developers.com/t/rooting-sm-t380-with-pie.4049951/ (Post by Winston Churchill)
https://forum.xda-developers.com/t/guide-comprehensive-t380-tab-a-2017-8-0-root-guide.3753203/
https://forum.xda-developers.com/t/twrp-3-2-1-1-root-tab-a-sm-t380-t385-10-02-2018.3747564/

Barto604 said:
Hello,
I was wondering if the T380 is rootable?
I tried to follow [TWRP 3.2.1-1] [ROOT] Tab A SM-T380/T385 - 10/02/2018 but it didn't work ( as I assume) since the guide is quite old. I also tried patching the boot.img using the magisk tutorial but I end up with the Installed: N\A Ramdisk: Yes A\B & Sars: no.
I can't also downgrade since I have the latest 2021 patch and the binary is 4 while the version below that is on 3. ROM STOCK
PS: I can install TWRP without any problems, the only issue is rooting with magisk
Any help or suggestion really appreciated.
Click to expand...
Click to collapse
I haven't done this on the T380, but it works on other Samsung tablets. Instead of the rigamarole of patching the boot image, just flash Magisk-v21.4.zip with TWRP. It won't give you the latest version, but it installs Magisk Manager, and you can use that to update to the latest version of Magisk and Magisk Manager.

lewmur said:
I haven't done this on the T380, but it works on other Samsung tablets. Instead of the rigamarole of patching the boot image, just flash Magisk-v21.4.zip with TWRP. It won't give you the latest version, but it installs Magisk Manager, and you can use that to update to the latest version of Magisk and Magisk Manager.
Click to expand...
Click to collapse
Hi, sorry for the late reply, I already tried using earlier versions of magisk it says it patch and everything via TWRP but when I reboot magisk app is not found and when I install the APK it says Installed: N/A

Barto604 said:
Hi, sorry for the late reply, I already tried using earlier versions of magisk it says it patch and everything via TWRP but when I reboot magisk app is not found and when I install the APK it says Installed: N/A
Click to expand...
Click to collapse
Try flashing Magisk23.apk with TWRP as if it were a zip. That worked with latest 11 ROM with T500.

Tried it, didn't work either, I think them latest security patch for this tablet block root or something, I'm literally stuck.