Related
DELETED
4llerbuntu said:
Hello.
PLEASE HELP ME.
I totally bricked my device. completely dead. i wiped the wrong partitions in fastboot, now it won't get detected at all. it won't even come on.
I'm in a country where its not possible to send it in to Asus for repairs.
computer still sees it as Qualcomm HS-USB QDLoader 9008
but i don't have the necessary tools or files to recover it. PLEASE HELP ME>.
Click to expand...
Click to collapse
Start saving money for new phone :^)
BTW just out of curiosity, what did you wipe?
DELETED
does your phone boot
4llerbuntu said:
The firmware partitions, modem, hyp, sbl1, recovery.
Forgot to flash them back before reboot.
Ive since learnt one can recover with QPST and some files. Problem is i cant find them for Asus.
Click to expand...
Click to collapse
you didn't wipe aboot, abootbak, hypbak? right? Our phone has a backup partition for each partition (abootbak, hypback, sbl1bak, modembak, etc), asus included these, so there must be some way to use them to unbrick. Are you able to reboot to fastboot mode? ( i guess not, but still to confirm)
You can unbrick with QFIL ONLY if you manage to find your device's RAM IMAGE (usually MPRxxxx.mbn) and BOOT IMAGE (usually xxxx_msimage.mbn). Other flash files are included in asus fota, only these two are not. @shakalaca might help to find these files or the entire service ROM. I have been searching for asus service but to no avail . I have flashed many lenevo and xiomi phones with QFIL. Here's is a very nice guide http://www.androidbrick.com/unbrick...-you-have-the-right-kind-of-rom-qhsusb_dload/
You can request for ZF2 laser's service ROM on that website/blog. GSM FORUM is also a good forum to request service ROMs
DELETED
mohamedelkholy said:
does your phone boot
Click to expand...
Click to collapse
No it doesn't boot. It won't even power on
But it still gets detected as Qualcomm device when plugged in to pc
4llerbuntu said:
No i didnt wipe those.
Will the MPRxxx.mbn and msimage.mbn for another phone but similar processor and chipset work? I found those for MSM8916 for another device and im hoping i can use those.
Click to expand...
Click to collapse
I never cross flashed ram image. Be patient. Don't flash other device's ram image, it may worsen conditions. Keep this as the final solution, but NOT NOW. Also, you need boot image (.mbn) too.
DELETED
DELETED
deleted
Deleted
deleted
Deleted
Deleted
4llerbuntu said:
hmmn, i'm so sad. so nobody is willing to help me at all?
Click to expand...
Click to collapse
not really, I think we're all (ok, just me) don't have that knowledge to help you, or simply can't
4llerbuntu said:
i always assumed all the people who post on this board had the device.
Click to expand...
Click to collapse
Yes, all people there should have laser, and no, i dont have your type, and someone maybe just lurking around, want to buy this laser phone if they feel like it
4llerbuntu said:
Surely i can't be the only person who will ever have this problem.
Click to expand...
Click to collapse
Yes, me too, I think someone will do this thing, don't know why, just feel like it?
4llerbuntu said:
i hope someone is willing to help when it happens to another person.
Click to expand...
Click to collapse
I'm hope we got that knowledge too
4llerbuntu said:
Maybe i should just give up. i'm so down right now.
alright bye.
Click to expand...
Click to collapse
Sorry to hear that
Sent from my ASUS_Z00RD using XDA Labs
4llerbuntu said:
computer still sees it as Qualcomm HS-USB QDLoader 9008
but i don't have the necessary tools or files to recover it. PLEASE HELP ME>.
Click to expand...
Click to collapse
Are you sure msimage is same as gpt? I have attached my ze550kl msm8916 gpt dump. Seems there are three- gpt, gpt1, and gpt2. Try your luck with each one by one.
And please stick to one thread, b7mping the forum is not a solution to your problem. Update your OP by mentioned.ing the workarounds you have tried till now and useful links you have visited for fixing the issue. I know a friend who is a mobile repairer. He might have the service rom for your device. I am waiting for his reply
sziraqui said:
Are you sure msimage is same as gpt? I have attached my ze550kl msm8916 gpt dump. Seems there are three- gpt, gpt1, and gpt2. Try your luck with each one by one.
And please stick to one thread, b7mping the forum is not a solution to your problem. Update your OP by mentioned.ing the workarounds you have tried till now and useful links you have visited for fixing the issue. I know a friend who is a mobile repairer. He might have the service rom for your device. I am waiting for his reply
Click to expand...
Click to collapse
Thank you. I will do that
4llerbuntu said:
Hello.
PLEASE HELP ME.
I totally bricked my device. completely dead. i wiped the wrong partitions in fastboot, now it won't get detected at all. it won't even come on.
I'm in a country where its not possible to send it in to Asus for repairs.
computer still sees it as Qualcomm HS-USB QDLoader 9008
but i don't have the necessary tools or files to recover it. PLEASE HELP ME>.
Click to expand...
Click to collapse
Read this and see if any if it applies.
www.androidbrick.com/unbrick-recover-your-dead-lg-g3-g2-all-variants
I'm not sure how the tool works, but maybe you can pull your backups and write back your partitions from the backup.
Sent from my ASUS_Z00TD using Tapatalk
Mods please help close this thread. ........
Phone: T-mobile SM-G950U
Hello. After receiving root the phone was flashed using flashfire on stock firmware g9500 ( Select in ""firmware flash package" AP, BL, CP, CSC from g9500 firmware, tap on all available check mark)
Now phone is not turn ON (black screen). In device Manager, is defined as qualcomm hs-usb qdloader 9008. QPST, QFIL show "Phone in dowmnload mode", "Q/QCP-XXX (Sahara Download)
For QPST files you need mprg8998.hex and many other files... How i can unbrick phone?
Update:
Unbrick files for s8 and s8+
1) Connect in EDL mode (9008 port in device manager)
2) start G95XU2_Recovery.bat
3) go Bootloader and flash with patched Odin firmwire
I'm in the same boat as you, we're you ever able to resolve your issue? And if so how?
Lol sm-g9500 is a different phone, I hope your didn't flash bl it can brick the device
Yea you're phone is not recoverable via flashing normal firmware. You flashed the wrong firmware. You will need to bring it to someone who has the ability to do an edl (emergency download mode) repair which is very difficult to do so it's likely better to try and get it replaced.
There is a way to do it by creating sdc files using Atf box, an SD card, a jig and a micro to type c converter. I just ordered a box, I'll share the rescue file if it works.
Partcyborg I do believe that if I have that img file I can fix it, although
I think he can just reflash with odin the true rom is happen to me too no problem
In this mode you cannot even put your phone into download mode or even recovery. It's because the bootloader is messed up, you must have a service rom to fix it, or there are ways to put your phone into download mode using a sdc. It's a hard brick.
The problem is that you cannot access download mode or recovery mode, the phone is unresponsive.
You now have a beautiful paperweight
crixley said:
You now have a beautiful paperweight
Click to expand...
Click to collapse
Nah it's fixable, it's been done. @jhofseth was successful in recovering from this state. Maybe he can help.
partcyborg said:
Nah it's fixable, it's been done. @jhofseth was successful in recovering from this state. Maybe he can help.
Click to expand...
Click to collapse
You needed jtag right? I remember reading about that before
partcyborg said:
Nah it's fixable, it's been done. @jhofseth was successful in recovering from this state. Maybe he can help.
Click to expand...
Click to collapse
I've an S8+, I would recommend asking @elliwigy what he suggests.
u got the box? plz im waiting too
Bump
Unbrick files for s8 and s8+
1) Connect in EDL mode (9008 port in device manager)
2) start G95XU2_Recovery.bat
3) go Bootloader and flash with patched Odin firmwire
mahotlov said:
Unbrick files for s8 and s8+
1) Connect in EDL mode (9008 port in device manager)
2) start G95XU2_Recovery.bat
3) go Bootloader and flash with patched Odin firmwire
Click to expand...
Click to collapse
What files are these firehose for s8/+
mahotlov said:
Unbrick files for s8 and s8+
1) Connect in EDL mode (9008 port in device manager)
2) start G95XU2_Recovery.bat
3) go Bootloader and flash with patched Odin firmwire
Click to expand...
Click to collapse
Where did you locate these if i might ask there was only one person i know who had them
TheMadScientist said:
Where did you locate these if i might ask there was only one person i know who had them
Click to expand...
Click to collapse
I was going to all the same because it has firehose files in it.
Vell123 said:
What files are these firehose for s8/+
Click to expand...
Click to collapse
I don't understand your question.
TheMadScientist said:
Where did you locate these if i might ask there was only one person i know who had them
Click to expand...
Click to collapse
This files from 4pda forums (Russia). This is not classified information. They shared access over 2 months ago.
mahotlov said:
I don't understand your question.
This files from 4pda forums (Russia). This is not classified information. They shared access over 2 months ago.
Click to expand...
Click to collapse
Can you get n950u files like these
mahotlov said:
I don't understand your question.
This files from 4pda forums (Russia). This is not classified information. They shared access over 2 months ago.
Click to expand...
Click to collapse
The files you posted contain Important files like fire hose
hey i likely know the answer to this but i got my lg g6 stuck in qualcomm 9008 mode does anyone know anything i can try? i am planning to send this phone in for warranty over a screen issue i was having but when attempting to factory reset it crashed and ended up here. worried they wont honor the warranty now
Use LGUP and UPPERCUT to flash the stock KDZ files. Google how to get into download mode and a guide. Easy to fix.
basicreece said:
Use LGUP and UPPERCUT to flash the stock KDZ files. Google how to get into download mode and a guide. Easy to fix.
Click to expand...
Click to collapse
there is no download mode. its lifeless aside from the pc recognizing a device in qualcomm 9008 mode when i plug it in.
Download will work.
basicreece said:
Download will work.
Click to expand...
Click to collapse
How? every key combination I've tried does nothing. I guess I might be missing something if so could you be more specific? I do appreciate the help
basicreece said:
Download will work.
Click to expand...
Click to collapse
im pretty sure my laf partition is corrupted
Just follow the guide. I've repaired many phones with this issue.
basicreece said:
Just follow the guide. I've repaired many phones with this issue.
Click to expand...
Click to collapse
the guide was as suspected no help. the device remains unresponsive.
Download mode, flash KDZ. Easy.
basicreece said:
Download mode, flash KDZ. Easy.
Click to expand...
Click to collapse
laf is gone (the partition that runs download mode) in this state I need some way of communication to the device in edl mode. I know what you're saying to do but there is no download mode to get into ive tried... multiple times.
It 100% works. I've fixed handful phones with this exact issue.
basicreece said:
It 100% works. I've fixed handful phones with this exact issue.
Click to expand...
Click to collapse
Im not arguing the validity of this technique in most cases this would be proper procedure but my failure happened partway through writing partitions.
the partition map is corrupt and laf is empty there is no download mode to communicate with anymore. very specific to MY device download mode has been in the easiest sense of the situation deleted
Anyone else got some ideas?
Tinyshy said:
Anyone else got some ideas?
Click to expand...
Click to collapse
Sounds like you got 2 warranty issues now. If the bootloader is locked, LG should honour the repair.
There's a program called QFIL (qualcomm flash) and you can use it to flash a kdz. I believe all it does is flashes download mode as once it succeeds and your phone is in download mode you would then reinstall stock kdz. I noticed there's a mention of 'firehose' though and I'm unsure yet of what that is.
Just curious: how did you manage to remove write protected partition while your bootloader is locked?
MS. said:
Just curious: how did you manage to remove write protected partition while your bootloader is locked?
Click to expand...
Click to collapse
I'm also curious as to what steps you took to lead you here @Tinyshy
if you have bootloader unlock you will never stuck in this, btw in the section of lg g6 h872 i open the thread for all people stuck in this, i also open a petition to lg, sorry mate for now we are aaaaaaaaaaaaaaaall stuck in this sh++, no file available for this smartphone for the hard brick, same for the v20 and the g6
help please
basicreece said:
Download mode, flash KDZ. Easy.
Click to expand...
Click to collapse
can you help me where is the tutorial. I relock the bootloader and brick the phone.
camargod20 said:
can you help me where is the tutorial. I relock the bootloader and brick the phone.
Click to expand...
Click to collapse
https://techtrickz.com/how-to/how-t...re-on-lg-g6-guide-to-unbrick-a-bricked-lg-g6/
Hi,
My phone is stuck in edl mode and i can't flash rom via flashtool because i get authenticatioın failure.
All i need is a person who with EDL Authorized Xiaomi account.
Everything is ready on my pc.
Just connect my pc via teamviewer and login.
Please someone help me
Hello,
I really don't think you will get someone with an EDL Authorized Xiaomi account to help you for free... but it's nice to try. ^^
Good Luck!
Just this morning I solved a brick by simply putting all the commands in sequence contained in the .bat files of the official fastboot global rom, if you want I can help you in this way.
Kodex-99 said:
Just this morning I solved a brick by simply putting all the commands in sequence contained in the .bat files of the official fastboot global rom, if you want I can help you in this way.
Click to expand...
Click to collapse
fastboot commands doen't work on EDL mode
Nvm my acc was not EDL
Micdu70 said:
Hello,
I really don't think you will get someone with an EDL Authorized Xiaomi account to help you for free... but it's nice to try. ^^
Good Luck!
Click to expand...
Click to collapse
it doesnt have to be free.
sercangogercin said:
it doesnt have to be free.
Click to expand...
Click to collapse
Try S-Unlock. I was stuck in EDL mode a couple of weeks back. Those guys fixed it remotely.
Cost me 15 USD I think.
Good luck mate!
nestojean said:
Try S-Unlock. I was stuck in EDL mode a couple of weeks back. Those guys fixed it remotely.
Cost me 15 USD I think.
Good luck mate!
Click to expand...
Click to collapse
How long does it take to enter your teamviewer?
What time did you do it?
^ this guy unbricked my Mi9T 2 weeks ago, after ARB hardbrick via Teamviewer EDL Flash, nice service.
So we're all waiting for a very merry Christmans un-brick story here!
MOD EDIT: quote removed
Lol. Well they need you over in the redmi note 8 pro section. They bricking them phones like there free.
sercangogercin said:
Hi,
My phone is stuck in edl mode and i can't flash rom via flashtool because i get authenticatioın failure.
All i need is a person who with EDL Authorized Xiaomi account.
Everything is ready on my pc.
Just connect my pc via teamviewer and login.
Please someone help me
Click to expand...
Click to collapse
Aynı problemim var. Yardım edebilecek biri var mı? EDL modundayım, sadece yetkili hesaba ihtiyacım var. Herhangi biri teamwiever'e yardım edebilir mi?
MOD EDIT: Please post only in English according to the FORUM RULES,translation added below:
I have the same problem. I'm in EDL mode, I just need an authorized account.
Use QFIL tool
Hi, you can use Qualcomm Flash Image Loader (QFIL) to flash your hard bricked phone. You need a modified no authentication programmer firehose file for your K20 which is not available but for K20 pro it is available(I googled tens of times). Can anyone here upload the modified firehose prog file for K20 or mi 9t? Or share the guidelines for modifying firehose prog file for no authentication?
shinob1 said:
Hi, you can use Qualcomm Flash Image Loader (QFIL) to flash your hard bricked phone. You need a modified no authentication programmer firehose file for your K20 which is not available but for K20 pro it is available(I googled tens of times). Can anyone here upload the modified firehose prog file for K20 or mi 9t? Or share the guidelines for modifying firehose prog file for no authentication?
Click to expand...
Click to collapse
After extensive googling I found that the firehose file for our device is "prog_ufs_firehose_Sdm730_ddr_davinci_sig_rb1.elf"
Google gave few links where the file can be download. I think, I can't post them here as one has to pay to download those files. Perhaps the device is still new and the file not yet freely available online.
Good job bro!
Stillness said:
After extensive googling I found that the firehose file for our device is "prog_ufs_firehose_Sdm730_ddr_davinci_sig_rb1.elf"
Google gave few links where the file can be download. I think, I can't post them here as one has to pay to download those files. Perhaps the device is still new and the file not yet freely available online.
Click to expand...
Click to collapse
Thanks for the file name bro. I finally found "prog_ufs_firehose_Sdm730_ddr_davinci_sig_rb1.elf" for free and still cannot flash using QFIL or QPST. Can mi 9t be flashed with only miflash due to EDL lockdown on xiaomi mobiles(I am stuck on 9008 mode)?
I also tried renaming and copying the modified firehose in the fastboot rom folder and miflash is saying programmer transfer error.
I also contacted authorized mi service center near me and they are saying they have to replace my motherboard (my warranty is lost due to opening of my back cover)and they do not have EDL authorization (which is level 3 they said to me)?
shinob1 said:
Thanks for the file name bro. I finally found "prog_ufs_firehose_Sdm730_ddr_davinci_sig_rb1.elf" for free and still cannot flash using QFIL or QPST. Can mi 9t be flashed with only miflash due to EDL lockdown on xiaomi mobiles(I am stuck on 9008 mode)?
I also tried renaming and copying the modified firehose in the fastboot rom folder and miflash is saying programmer transfer error.
I also contacted authorized mi service center near me and they are saying they have to replace my motherboard (my warranty is lost due to opening of my back cover)and they do not have EDL authorization (which is level 3 they said to me)?
Click to expand...
Click to collapse
I'm at ignorance about QFIL or QPST compatibility with our device. This provides a list of alternative tools to try if that two fails.
If your motherboard is dead, then no flashing will work.
If I may, would you like to share the link where you found the firehose for free?
Link to download
Stillness said:
I'm at ignorance about QFIL or QPST compatibility with our device. This provides a list of alternative tools to try if that two fails.
If your motherboard is dead, then no flashing will work.
If I may, would you like to share the link where you found the firehose for free?
Click to expand...
Click to collapse
Its my pleasure to help you and here is the link:
https://mega.nz/file/f0kBFbKC#stsdUiLg7TF5dTnt11_hBPsBCu2XnA0pq_vkvUeF6hk
You can find our firehose file in the qualcomm folder.
If the link is not working you can google "android for ufs(t) 1.0.6.0" and download it.
Your alternative tools link is redirecting to qfil download. Can you revise the link or share the names here please.
shinob1 said:
Its my pleasure to help you and here is the link:
https://mega.nz/file/f0kBFbKC#stsdUiLg7TF5dTnt11_hBPsBCu2XnA0pq_vkvUeF6hk
You can find our firehose file in the qualcomm folder.
Click to expand...
Click to collapse
Thank you very much.
shinob1 said:
Your alternative tools link is redirecting to qfil download. Can you revise the link or share the names here please.
Click to expand...
Click to collapse
Please refer to the attached text file for the names and the links for the alternatives.
Stillness said:
Thank you very much.
Please refer to the attached text file for the names and the links for the alternatives.
Click to expand...
Click to collapse
Thanks, I tried all these and found the modified programmers are not exactly for my device and realized that service centre is the only way(without exact no auth programmer).
I approached an mi authorized service centre and I am allowed to get inside (they are unaware of 9008 mode) and get my flashing done with EDL authorized account. Thanks to all.
shinob1 said:
Thanks, I tried all these and found the modified programmers are not exactly for my device and realized that service centre is the only way(without exact no auth programmer).
I approached an mi authorized service centre and I am allowed to get inside (they are unaware of 9008 mode) and get my flashing done with EDL authorized account. Thanks to all.
Click to expand...
Click to collapse
Your phone is Mi 9T (davinci) or a different one?
However, glad you finally got your device fixed.
I have the T-mobile OnePlus 7t Pro 5G Mclaren edition. I was trying to root it and ended up bricking it. I'm trying to restore it using MSM download tools but I can't seem to get the device detected. I've watched countless YouTube videos, XDA forms, and google and still can't seem to get it to work. I downloaded the drivers, switched it to 9008, tried different OOS downloads, been careful to get the button timing right. None of these things seem to work! Please help!
so your phone was never detected as Qualcomm HS-USB QDLoader 9008?
someone5 said:
I have the T-mobile OnePlus 7t Pro 5G Mclaren edition. I was trying to root it and ended up bricking it. I'm trying to restore it using MSM download tools but I can't seem to get the device detected. I've watched countless YouTube videos, XDA forms, and google and still can't seem to get it to work. I downloaded the drivers, switched it to 9008, tried different OOS downloads, been careful to get the button timing right. None of these things seem to work! Please help!
Click to expand...
Click to collapse
Did you get the bootloader unlocked? Check in the guide section and it has everything there. I'm not doubting your efforts but there's a detailed thread there. If you were able to unlock the bootloader you might be able to flash a rom.
Does adb recognize your device in fastboot?
It's usually driver issue, try downloading your driver from here then reinstall it.
Try changing the cables, a faulty cable can cause this too.
XDHx86 said:
Does adb recognize your device in fastboot?
It's usually driver issue, try downloading your driver from here then reinstall it.
Try changing the cables, a faulty cable can cause this too.
Click to expand...
Click to collapse
I figured it out! Ended up being the dumbest thing lol
someone5 said:
I figured it out! Ended up being the dumbest thing lol
Click to expand...
Click to collapse
I'm assuming it was the cable, glad it worked out then mate.
someone5 said:
I figured it out! Ended up being the dumbest thing lol
Click to expand...
Click to collapse
Hi, do you mind sharing how you solved your issue with msm tool.... i am currently having same issue. please check attachment.
xixtech said:
Hi, do you mind sharing how you solved your issue with msm tool.... i am currently having same issue. please check attachment.
Click to expand...
Click to collapse
First you have to make sure you have the original boot image.
Second when you go to upload it to the phone you have to unplug your PC from the internet and put the calendar date back to December 2018 and then try to upload.
Hope this helps