Database Users

Total brick. Wiped the wrong things in fastboot.

DELETED

4llerbuntu said:
Hello.
PLEASE HELP ME.
I totally bricked my device. completely dead. i wiped the wrong partitions in fastboot, now it won't get detected at all. it won't even come on.
I'm in a country where its not possible to send it in to Asus for repairs.
computer still sees it as Qualcomm HS-USB QDLoader 9008
but i don't have the necessary tools or files to recover it. PLEASE HELP ME>.
Click to expand...
Click to collapse
Start saving money for new phone :^)
BTW just out of curiosity, what did you wipe?

DELETED

does your phone boot

4llerbuntu said:
The firmware partitions, modem, hyp, sbl1, recovery.
Forgot to flash them back before reboot.
Ive since learnt one can recover with QPST and some files. Problem is i cant find them for Asus.
Click to expand...
Click to collapse
you didn't wipe aboot, abootbak, hypbak? right? Our phone has a backup partition for each partition (abootbak, hypback, sbl1bak, modembak, etc), asus included these, so there must be some way to use them to unbrick. Are you able to reboot to fastboot mode? ( i guess not, but still to confirm)
You can unbrick with QFIL ONLY if you manage to find your device's RAM IMAGE (usually MPRxxxx.mbn) and BOOT IMAGE (usually xxxx_msimage.mbn). Other flash files are included in asus fota, only these two are not. @shakalaca might help to find these files or the entire service ROM. I have been searching for asus service but to no avail . I have flashed many lenevo and xiomi phones with QFIL. Here's is a very nice guide http://www.androidbrick.com/unbrick...-you-have-the-right-kind-of-rom-qhsusb_dload/
You can request for ZF2 laser's service ROM on that website/blog. GSM FORUM is also a good forum to request service ROMs

DELETED

mohamedelkholy said:
does your phone boot
Click to expand...
Click to collapse
No it doesn't boot. It won't even power on
But it still gets detected as Qualcomm device when plugged in to pc

4llerbuntu said:
No i didnt wipe those.
Will the MPRxxx.mbn and msimage.mbn for another phone but similar processor and chipset work? I found those for MSM8916 for another device and im hoping i can use those.
Click to expand...
Click to collapse
I never cross flashed ram image. Be patient. Don't flash other device's ram image, it may worsen conditions. Keep this as the final solution, but NOT NOW. Also, you need boot image (.mbn) too.

DELETED

DELETED

deleted

Deleted

deleted

Deleted

Deleted

4llerbuntu said:
hmmn, i'm so sad. so nobody is willing to help me at all?
Click to expand...
Click to collapse
not really, I think we're all (ok, just me) don't have that knowledge to help you, or simply can't
4llerbuntu said:
i always assumed all the people who post on this board had the device.
Click to expand...
Click to collapse
Yes, all people there should have laser, and no, i dont have your type, and someone maybe just lurking around, want to buy this laser phone if they feel like it
4llerbuntu said:
Surely i can't be the only person who will ever have this problem.
Click to expand...
Click to collapse
Yes, me too, I think someone will do this thing, don't know why, just feel like it?
4llerbuntu said:
i hope someone is willing to help when it happens to another person.
Click to expand...
Click to collapse
I'm hope we got that knowledge too
4llerbuntu said:
Maybe i should just give up. i'm so down right now.
alright bye.
Click to expand...
Click to collapse
Sorry to hear that
Sent from my ASUS_Z00RD using XDA Labs

4llerbuntu said:
computer still sees it as Qualcomm HS-USB QDLoader 9008
but i don't have the necessary tools or files to recover it. PLEASE HELP ME>.
Click to expand...
Click to collapse
Are you sure msimage is same as gpt? I have attached my ze550kl msm8916 gpt dump. Seems there are three- gpt, gpt1, and gpt2. Try your luck with each one by one.
And please stick to one thread, b7mping the forum is not a solution to your problem. Update your OP by mentioned.ing the workarounds you have tried till now and useful links you have visited for fixing the issue. I know a friend who is a mobile repairer. He might have the service rom for your device. I am waiting for his reply

sziraqui said:
Are you sure msimage is same as gpt? I have attached my ze550kl msm8916 gpt dump. Seems there are three- gpt, gpt1, and gpt2. Try your luck with each one by one.
And please stick to one thread, b7mping the forum is not a solution to your problem. Update your OP by mentioned.ing the workarounds you have tried till now and useful links you have visited for fixing the issue. I know a friend who is a mobile repairer. He might have the service rom for your device. I am waiting for his reply
Click to expand...
Click to collapse
Thank you. I will do that

4llerbuntu said:
Hello.
PLEASE HELP ME.
I totally bricked my device. completely dead. i wiped the wrong partitions in fastboot, now it won't get detected at all. it won't even come on.
I'm in a country where its not possible to send it in to Asus for repairs.
computer still sees it as Qualcomm HS-USB QDLoader 9008
but i don't have the necessary tools or files to recover it. PLEASE HELP ME>.
Click to expand...
Click to collapse
Read this and see if any if it applies.
www.androidbrick.com/unbrick-recover-your-dead-lg-g3-g2-all-variants
I'm not sure how the tool works, but maybe you can pull your backups and write back your partitions from the backup.
Sent from my ASUS_Z00TD using Tapatalk

Mods please help close this thread. ........

Mediatek SP Flash Tool

Hey,
Has anyone succes in unbricking a Meizu device with the mediatek sp flash tool?
I personally have a bricked MX5 (thanks to the A**hole who made the MX5 BT unlock topic)

nope... still cannot bypass the secure base-band chip problems... the only available method is to program the boot to load the original source code and to creat a
1 - android-info.txt
2- android-product.txt
specific for mx5.. im still experimenting this though.. so far no progress yet..

If we can get this working, hard bricked devices can get recovered with fastboot I think?
Is there a way I can help you?

killerbie said:
If we can get this working, hard bricked devices can get recovered with fastboot I think?
Is there a way I can help you?
Click to expand...
Click to collapse
yes, hardbrick can be recovered if only we can bypass the secure baseband chip.. im still learning the code to creat those 2 files that i mentioned earlier.. so far no good.. still need time to identify which code that can match the baseband chip pass code. i convert update.zip to aboot.img with android file.txt that i creat. but still the code are not match. there is 1 way to reset the baseband chip, but need usb tongled and removed emmc card to reset all.. thats hell of a way to do becoz its include hardware modifications. and also need few device that only availble in chinesse , not mention the language though.. for now lets hope for master yus to bring the miracles to us..

I've found another flash tool, it seems to be provided by meizu themselves with a chinese manual called: MultiUpgrade 4.8.5 bundled with MultiUpgrade 4.8.5

killerbie said:
I've found another flash tool, it seems to be provided by meizu themselves with a chinese manual called: MultiUpgrade 4.8.5 bundled with MultiUpgrade 4.8.5
Click to expand...
Click to collapse
have u tested it yet?

need help,
did anyone can help me to solve my problem with flashtool?i try to flash my homtom ht 20 pro using flashtool, but my flashtool can not download or detect my phone i try to instal media tek usb vcom but stil can not work,cos my win 10 said that driver not digitaly signed,so anyone have solution for my problem, it will greatfull if you give me a link to download another driver so i can start flash my homtom ht 20 pro, thanks

You can install unsigned drivers in windows by shift clicking while reseting windows. You will be prompted later on on various options of reboot. One of them is going to be to not enforce signed drivers. If you have any trouble finding this option, look it up "reboot not enforcce signed drivers". You will find what you need.

S8 G950U Hardbrick

Phone: T-mobile SM-G950U
Hello. After receiving root the phone was flashed using flashfire on stock firmware g9500 ( Select in ""firmware flash package" AP, BL, CP, CSC from g9500 firmware, tap on all available check mark)
Now phone is not turn ON (black screen). In device Manager, is defined as qualcomm hs-usb qdloader 9008. QPST, QFIL show "Phone in dowmnload mode", "Q/QCP-XXX (Sahara Download)
For QPST files you need mprg8998.hex and many other files... How i can unbrick phone?
Update:
Unbrick files for s8 and s8+
1) Connect in EDL mode (9008 port in device manager)
2) start G95XU2_Recovery.bat
3) go Bootloader and flash with patched Odin firmwire

I'm in the same boat as you, we're you ever able to resolve your issue? And if so how?

Lol sm-g9500 is a different phone, I hope your didn't flash bl it can brick the device
Yea you're phone is not recoverable via flashing normal firmware. You flashed the wrong firmware. You will need to bring it to someone who has the ability to do an edl (emergency download mode) repair which is very difficult to do so it's likely better to try and get it replaced.

There is a way to do it by creating sdc files using Atf box, an SD card, a jig and a micro to type c converter. I just ordered a box, I'll share the rescue file if it works.
Partcyborg I do believe that if I have that img file I can fix it, although

I think he can just reflash with odin the true rom is happen to me too no problem

In this mode you cannot even put your phone into download mode or even recovery. It's because the bootloader is messed up, you must have a service rom to fix it, or there are ways to put your phone into download mode using a sdc. It's a hard brick.

The problem is that you cannot access download mode or recovery mode, the phone is unresponsive.

You now have a beautiful paperweight

crixley said:
You now have a beautiful paperweight
Click to expand...
Click to collapse
Nah it's fixable, it's been done. @jhofseth was successful in recovering from this state. Maybe he can help.

partcyborg said:
Nah it's fixable, it's been done. @jhofseth was successful in recovering from this state. Maybe he can help.
Click to expand...
Click to collapse
You needed jtag right? I remember reading about that before

partcyborg said:
Nah it's fixable, it's been done. @jhofseth was successful in recovering from this state. Maybe he can help.
Click to expand...
Click to collapse
I've an S8+, I would recommend asking @elliwigy what he suggests.

u got the box? plz im waiting too

Bump

Unbrick files for s8 and s8+
1) Connect in EDL mode (9008 port in device manager)
2) start G95XU2_Recovery.bat
3) go Bootloader and flash with patched Odin firmwire

mahotlov said:
Unbrick files for s8 and s8+
1) Connect in EDL mode (9008 port in device manager)
2) start G95XU2_Recovery.bat
3) go Bootloader and flash with patched Odin firmwire
Click to expand...
Click to collapse
What files are these firehose for s8/+

mahotlov said:
Unbrick files for s8 and s8+
1) Connect in EDL mode (9008 port in device manager)
2) start G95XU2_Recovery.bat
3) go Bootloader and flash with patched Odin firmwire
Click to expand...
Click to collapse
Where did you locate these if i might ask there was only one person i know who had them

TheMadScientist said:
Where did you locate these if i might ask there was only one person i know who had them
Click to expand...
Click to collapse
I was going to all the same because it has firehose files in it.

Vell123 said:
What files are these firehose for s8/+
Click to expand...
Click to collapse
I don't understand your question.
TheMadScientist said:
Where did you locate these if i might ask there was only one person i know who had them
Click to expand...
Click to collapse
This files from 4pda forums (Russia). This is not classified information. They shared access over 2 months ago.

mahotlov said:
I don't understand your question.
This files from 4pda forums (Russia). This is not classified information. They shared access over 2 months ago.
Click to expand...
Click to collapse
Can you get n950u files like these

mahotlov said:
I don't understand your question.
This files from 4pda forums (Russia). This is not classified information. They shared access over 2 months ago.
Click to expand...
Click to collapse
The files you posted contain Important files like fire hose

Mi 9t stuck in edl mode

Hi there I tried to flash the latest version of mi UI 11 global ROM and lock the bootloader using mi flash, it was installing successful until half way through it gave me a vendor error. This lead the phone to go black, the device can still be seen by the computer as com1 which leads me to believe it's in edl mode. Would anyone here know if flashing in edl mode it possible I keep getting the error authentication required? I've emailed Xiaomi help and they say they have no was to give me authentication any way around this? Thanks in advance

Can you get into fastboot mode?

same problem here , if you found any fix pleaseeeeee tell me..

kamotefx said:
there's no way you can flash in edl mode without the authorized edl account,
a russian tech help me and i paid 29 USD on paypal for the edl flashing using teamviewer
you must download the XiaoMiFlash.exe and the global fastboot rom and unzip it.
Install team viewer for remote flashing (EDL) using his authorized account
then contact him for the schedule.
for full info and contact details
READ IT HERE
Click to expand...
Click to collapse
nooo man
authorized account is not the only way
i have deleted only two code lines for authorization from flash_bat file in the fastboot rom and it installed normally without paying any thing to anyone

Hazem1abc said:
nooo man
authorized account is not the only way
i have deleted only two code lines for authorization from flash_bat file in the fastboot rom and it installed normally without paying any thing to anyone
Click to expand...
Click to collapse
Check his Profile (kamotefx) and find that he has crosd-posted 19 messages today with the same content.
Report him for scam

can u pls help
Hazem1abc said:
nooo man
authorized account is not the only way
i have deleted only two code lines for authorization from flash_bat file in the fastboot rom and it installed normally without paying any thing to anyone
Click to expand...
Click to collapse
i have bricked mi 9t can't flash .. need authorized mi acc .. can u help pls without authorized acc ? and which file i can remove lines from it to flash without authorization ?

Hazem1abc said:
nooo man
authorized account is not the only way
i have deleted only two code lines for authorization from flash_bat file in the fastboot rom and it installed normally without paying any thing to anyone
Click to expand...
Click to collapse
Can u share turorial?

Question qfil firmware

I dont suppose anybody has found any qfil firmware for our phone.. Imessed up and am now in qualcom 9008 edl mode. cant do anything

kev15058 said:
I dont suppose anybody has found any qfil firmware for our phone.. Imessed up and am now in qualcom 9008 edl mode. cant do anything
Click to expand...
Click to collapse
I don't think that Nothing will ever willingly publish the EDL package for the Nothing Phone 1, so the best way for you it's to contact Nothing for a return.

I asked Carl Pei for a share of MSM Tools just in case x)

AntoXik72 said:
I asked Carl Pei for a share of MSM Tools just in case x)
Click to expand...
Click to collapse
I sincerely fear that we will not have this file on NP1.
I have asked several times to access or share certain files, I have never received an answer.
But I hope you will have better luck than me