Mi 9t stuck in edl mode - Redmi K20 / Xiaomi Mi 9T Questions & Answers

Hi there I tried to flash the latest version of mi UI 11 global ROM and lock the bootloader using mi flash, it was installing successful until half way through it gave me a vendor error. This lead the phone to go black, the device can still be seen by the computer as com1 which leads me to believe it's in edl mode. Would anyone here know if flashing in edl mode it possible I keep getting the error authentication required? I've emailed Xiaomi help and they say they have no was to give me authentication any way around this? Thanks in advance

Can you get into fastboot mode?

same problem here , if you found any fix pleaseeeeee tell me..

kamotefx said:
there's no way you can flash in edl mode without the authorized edl account,
a russian tech help me and i paid 29 USD on paypal for the edl flashing using teamviewer
you must download the XiaoMiFlash.exe and the global fastboot rom and unzip it.
Install team viewer for remote flashing (EDL) using his authorized account
then contact him for the schedule.
for full info and contact details
READ IT HERE
Click to expand...
Click to collapse
nooo man
authorized account is not the only way
i have deleted only two code lines for authorization from flash_bat file in the fastboot rom and it installed normally without paying any thing to anyone

Hazem1abc said:
nooo man
authorized account is not the only way
i have deleted only two code lines for authorization from flash_bat file in the fastboot rom and it installed normally without paying any thing to anyone
Click to expand...
Click to collapse
Check his Profile (kamotefx) and find that he has crosd-posted 19 messages today with the same content.
Report him for scam

can u pls help
Hazem1abc said:
nooo man
authorized account is not the only way
i have deleted only two code lines for authorization from flash_bat file in the fastboot rom and it installed normally without paying any thing to anyone
Click to expand...
Click to collapse
i have bricked mi 9t can't flash .. need authorized mi acc .. can u help pls without authorized acc ? and which file i can remove lines from it to flash without authorization ?

Hazem1abc said:
nooo man
authorized account is not the only way
i have deleted only two code lines for authorization from flash_bat file in the fastboot rom and it installed normally without paying any thing to anyone
Click to expand...
Click to collapse
Can u share turorial?

Related

Noob friendly guide for unlocking bootloader of RN4 SD625 Indian Variant

Hi friends
Today I'm going to help you in unlocking the bootloader officially...
Many of us(including me) had problems in unlocking the bootloader...
It used to get stuck at 50 percent..
I had the same problem....
But here's what I did to unlock my bootloader....
Prerequisites:
1) MIUI 7.2.1 6 global beta ROM
2)mi unlock permissions on your mi account
3)Mi unlock tool
4)adb drivers
And of course RN4
Procedure:
First of all download global beta ROM from
http://en.miui.com/extra.php?mod=rom/download&r=309&mobile=no#468
It's a recovery ROM so flash it using updater app...
It will WIPE all of your internal storage so take a backup beforehand...
After flashing the beta ROM login using the same account where you've got the unlocking permission on your phone...
Now enable developer options and select USB debugging and OEM unlock
Now install the adb drivers on your pc from here
http://xiaomitips.com/download/adb-setup-v1-4-3/
After installing adb drivers download mi unlock tool from here http://en.miui.com/thread-204866-1-1.html
IMPORTANT
Now If you are using Windows 8 and above, disable the driver signature verfication on your PC... Its easy just Google it...
Now enter your RN4 into fastboot mode by pressing volume down and power button after switching off your phone...
Open MI unlock tool and login using the same account that is present on your phone..
NOTE: Dont use usb tethering of your RN4 phone for logging in to the MI unlock tool...it may result in you losing your unlocking permission... I dont know if its a bug or something but it happened twice with me when I used my RN4 for usb tethering...
I may be wrong but its always good to be on the safer side :laugh:
Now MI tool will check if your account has the unlocking permissions....
If it does then it will tell you to connect your phone to pc...
Connect it using USB cable in fastboot mode....
Wait for a few seconds as the drivers will be installing on your pc...
When the drivers are installed A "Connected" message will be displayed...
Now we are good to go...
Just press on unlock option...
Now If you followed all the steps carefully and also if you are lucky,your bootloader will be unlocked...
the process may take upto 10-15 seconds
IF IT STILL DOESNT UNLOCKS,
Switch on your phone and enable find device on your phone....
Go to i.mi.com and login to your MI account
click on find device option...
Enable data connection on your phone...
Now click on your device on find device page....
It will start locating your device...
once it is located properly try to unlock your bootloader again using MI unlock tool...
IF IT STILL DOESNT UNLOCKS,
then try again after 7 days...
because PATIENCE IS BITTER,BUT THE FRUIT IS SWEET!!!
Precautions/Notes:
1) I flashed Global Beta ROM because l was unable to unlock my bootloader on Global Stable version... First try in Global stable again after 4-5 days before flashing a Beta ROM...
2)I unlocked my bootloader on the same day I flashed the Beta ROM....If you are unable to unlock then use the Beta ROM for atleast 2-3 days then try again....
3)You may use older versions of MI unlock tool if the latest tool doesnt unlock your device... I also used an older version of MI unlock tool...
4)Dont forget to disable the driver signature verfication on your pc if you are using Windows 8 and above..
5)Also check if adb drivers are installed properly;to do so connect the phone in fastboot mode,open the command window and type "adb devices" without (" ") this.. if your phone is displayed it means adb drivers are installed properly... usually the phone name will be something like 0147BDD and so on.... it will be a colection of numbers and alphabets... every device has a unique id..
if your phone is not displayed then uninstall and reinstall adb drivers....
Please note that this method has worked for me but MAY or MAY NOT work for you...
P.S. Sorry if the thread is too BIG
I hope that your bootloader will be unlocked after following these steps :good:
ALL THE BEST Fellow MIUIans :good: :laugh:
can i get ota updates after bootloader unlocked on global stable rom?
Bro!!!! hoila unlocked successfully. using the dev rom
not working. already on beta ROM from past few days
On global developer ROM from a week, yet no success. I try everyday but everytime at 50% stucks
blueandro said:
can i get ota updates after bootloader unlocked on global stable rom?
Click to expand...
Click to collapse
I'm not sure but I guess you probably will...
Else you can manually update by downloading recovery rom and flashing it.... :laugh:
janajackie said:
Bro!!!! hoila unlocked successfully. using the dev rom
Click to expand...
Click to collapse
Congratulations bro :good:
Kapiljhajhria said:
not working. already on beta ROM from past few days
Click to expand...
Click to collapse
Sorry to hear that...
Try to link your account to the device in developer options...
It may work hopefully...
ramsaicharan said:
On global developer ROM from a week, yet no success. I try everyday but everytime at 50% stucks
Click to expand...
Click to collapse
I would recommend you to link your account to your device in developer options...
leo_pard2331 said:
I would recommend you to link your account to your device in developer options...
Click to expand...
Click to collapse
I have enabled USB debugging, OEM unlocking and I do link everytime before unlocking, yet it gets stuck there
Try after five days. It will work
leo_pard2331 said:
Sorry to hear that...
Try to link your account to the device in developer options...
It may work hopefully...
Click to expand...
Click to collapse
unlocked without linking the device from developer option. changed sim cards and used only one sim card. maybe it was luck or using the registered sim in slot 1 and as the only sim did the trick.
Kapiljhajhria said:
unlocked without linking the device from developer option. changed sim cards and used only one sim card. maybe it was luck or using the registered sim in slot 1 and as the only sim did the trick.
Click to expand...
Click to collapse
Way to go bro!!!
Congo...
ramsaicharan said:
I have enabled USB debugging, OEM unlocking and I do link everytime before unlocking, yet it gets stuck there
Click to expand...
Click to collapse
Just remove all the SIM cards and insert the registered SIM in slot 1...
It worked for Kapiljhajharia who have commented on this thread... If it still doesn't work then try again after 4-5 days...
All the best :good:
@leo_pard2331 the global beta ROM link is not working on the avob
Can I download the latest one v7.3.2 from the below link??
http://en.miui.com/download-309.html
Triggered from rn3
amitroutray said:
@leo_pard2331 the global beta ROM link is not working on the avob
Can I download the latest one v7.3.2 from the below link??
http://en.miui.com/download-309.html
Triggered from rn3
Click to expand...
Click to collapse
Yes you can...
Any beta ROM will work...
All the best!!! :good:
leo_pard2331 said:
Yes you can...
Any beta ROM will work...
All the best!!! :good:
Click to expand...
Click to collapse
sorry bro, newby question,..
when i need disable the driver signature verfication, "before install all the driver" or "after install driver, (disable driver sig.) then open mi unlock,."
thanks bro...
teguhwidi said:
sorry bro, newby question,..
when i need disable the driver signature verfication, "before install all the driver" or "after install driver, (disable driver sig.) then open mi unlock,."
thanks bro...
Click to expand...
Click to collapse
Disable it before opening mi unlock tool...
The order doesn't matter but I recommend you to disable it before installing all the drivers...
Configure account mi cloud / new insert account mi cloud ?
Akta_ar said:
Configure account mi cloud / new insert account mi cloud ?
Click to expand...
Click to collapse
Sorry bro I didn't get your question...
Please be more specific....

P8 Lite Boot loop

I've been trying almost everything for days. When I turn on the phone the bootloader enters in a loop.
I can't access to recovery (vol up + power), not even in update mode(vol up & vol down + power).
The only thing I can access is the fastboot but my phone is locked and I don't the have the imei to unlock via calculator or the oficial huawei page.
If someone have any suggestions.
Instalar ROM vía fastboot
Sent from my ALE-L21 using XDA-Developers Legacy app
VicenteR93 said:
I've been trying almost everything for days. When I turn on the phone the bootloader enters in a loop.
I can't access to recovery (vol up + power), not even in update mode(vol up & vol down + power).
The only thing I can access is the fastboot but my phone is locked and I don't the have the imei to unlock via calculator or the oficial huawei page.
If someone have any suggestions.
Click to expand...
Click to collapse
If getting your IMEI is your only concern then you can get that from the box... But you'll need Product ID too, and for that you'll need to have your phone booted up...
amageek said:
If getting your IMEI is your only concern then you can get that from the box... But you'll need Product ID too, and for that you'll need to have your phone booted up...
Click to expand...
Click to collapse
There is a program for that. Huawei product id generator. You can find this program very easy.
amageek said:
If getting your IMEI is your only concern then you can get that from the box... But you'll need Product ID too, and for that you'll need to have your phone booted up...
Click to expand...
Click to collapse
when you mean the box. Is the box where I bought the phone? 'Cause I don't have it anymore and is not even behind the battery.
VicenteR93 said:
when you mean the box. Is the box where I bought the phone? 'Cause I don't have it anymore and is not even behind the battery.
Click to expand...
Click to collapse
Yes that box.. There may be other way too, I'll look into it and share is I find anything
Fedroid said:
Instalar ROM vía fastboot
Sent from my ALE-L21 using XDA-Developers Legacy app
Click to expand...
Click to collapse
I downloaded the official ROM from huawei and is the recent version but when I tried to install it with "fastboot update file.zip" is asking for an android-text.txt and I been searching to re-create that file manually and then is asking for another file and so on.
I've been searching if I can install the oficcial ROM by fastboot even if is not unlocked and find this guide but it is not usefull for me 'cause I can't access into the download mode or use adb.
This is the information I could extract from my phone.
Firmware : ALE-L21C109B130
I couldn't fint this version of firmware.
If you could light my way if you have another method.
VicenteR93 said:
I downloaded the official ROM from huawei and is the recent version but when I tried to install it with "fastboot update file.zip" is asking for an android-text.txt and I been searching to re-create that file manually and then is asking for another file and so on.
I've been searching if I can install the oficcial ROM by fastboot even if is not unlocked and find this guide but it is not usefull for me 'cause I can't access into the download mode or use adb.
This is the information I could extract from my phone.
Firmware : ALE-L21C109B130
I couldn't fint this version of firmware.
If you could light my way if you have another method.
Click to expand...
Click to collapse
Extract files and flash it one by one using fastboot commands
I recommend you watch this video even if it is in Spanish, it can help you
,is from
EloYGomeZTv:good:
Sent from my Huawei P8lite/P8 Lite using XDA Labs
Fedroid said:
Extract files and flash it one by one using fastboot commands
Click to expand...
Click to collapse
Everything failed when tries to write 'cause the bootloader is locked.
davidlikeandroid23 said:
I recommend you watch this video even if it is in Spanish, it can help you
,is from
EloYGomeZTv:good:
Sent from my Huawei P8lite/P8 Lite using XDA Labs
Click to expand...
Click to collapse
I already saw a tutorial like this one but my bootloader is locked and I don't have the imei to unlock it. But thanks anyway.
VicenteR93 said:
I already saw a tutorial like this one but my bootloader is locked and I don't have the imei to unlock it. But thanks anyway.
Click to expand...
Click to collapse
Ok i searched for ways to find an IMEI number and found couple of ways...
1) Look under/in the sim tray. It may be there (I didn't check this out)
2) Find the IMEI/MEID using Google Dashboard. This is Google's control center that can be accessed from any computer with a web browser. You will need to log in with the Google account associated with your Android phone.You can access Google Dashboard by visiting www.google.com/settings/dashboard Expand the "Android" section by clicking the "Android" heading.Locate your phone in the list. If you have multiple devices associated with your account, all of the devices will be displayed. Find the device that you are trying to retrieve the IMEI/MEID number for. (This works)
3) At last, you can try to remove the back case and remove the battery. This can help you in 2 ways. Firstly, there should be IMEI code present under the battery. Secondly, this may cause you to get out of bootloop
amageek said:
Ok i searched for ways to find an IMEI number and found couple of ways...
1) Look under/in the sim tray. It may be there (I didn't check this out)
2) Find the IMEI/MEID using Google Dashboard. This is Google's control center that can be accessed from any computer with a web browser. You will need to log in with the Google account associated with your Android phone.You can access Google Dashboard by visiting www.google.com/settings/dashboard Expand the "Android" section by clicking the "Android" heading.Locate your phone in the list. If you have multiple devices associated with your account, all of the devices will be displayed. Find the device that you are trying to retrieve the IMEI/MEID number for. (This works)
3) At last, you can try to remove the back case and remove the battery. This can help you in 2 ways. Firstly, there should be IMEI code present under the battery. Secondly, this may cause you to get out of bootloop
Click to expand...
Click to collapse
You're the best Sir, the holy ruler!!!
I finally found it. With the option 1.
I checked to the second option and it was there too. Didn't know that option.
Thank you so much.
VicenteR93 said:
You're the best Sir, the holy ruler!!!
I finally found it. With the option 1.
I checked to the second option and it was there too. Didn't know that option.
Thank you so much.
Click to expand...
Click to collapse
Cheers... Now you may proceed further.. Do tell us about your methods/steps/processes for future reference...
Did you try installing hisuite to a windows machine there is a recovery option on it it will install the LATEST emui ROM to your phone and recover it.
http://consumer.huawei.com/minisite/HiSuite_en/index.html
Edit: if I remember correctly you just have to be in fastboot to recover it
ndg_2000 said:
Did you try installing hisuite to a windows machine there is a recovery option on it it will install the LATEST emui ROM to your phone and recover it.
http://consumer.huawei.com/minisite/HiSuite_en/index.html
Edit: if I remember correctly you just have to be in fastboot to recover it
Click to expand...
Click to collapse
I tried but at the end it tells me that I need to take the phone to the nearest center.
I downloaded a lot of ROM to try but I'm still trapped in the boot loop.
I tried all the solutions that has been posted before.
VicenteR93 said:
I downloaded a lot of ROM to try but I'm still trapped in the boot loop.
I tried all the solutions that has been posted before.
Click to expand...
Click to collapse
Have you managed to get the boot loader unlocked if not you need to tackle that first then your recovery options open up some what
ndg_2000 said:
Have you managed to get the boot loader unlocked if not you need to tackle that first then your recovery options open up some what
Click to expand...
Click to collapse
I already unlocked the bootlooader but I still have the boot loop even after pass cust, system, recovery, boot.
VicenteR93 said:
I already unlocked the bootlooader but I still have the boot loop even after pass cust, system, recovery, boot.
Click to expand...
Click to collapse
Stupid question but I will ask it anyway did you md5 check all of the files you have downloaded as I have had issues with another device and it was because of bad files

Repair imei mi a1, links updated

1- Unlock the bootloader
2- Install the usb driver of qualcomm
3- Turn off the phone in fastboot mode and give the command [fastboot oem edl]
the cell phone will turn off the screen. Wait for the computer to recognize the phone
4 - With the cell phone still connected on the computer, download the file ( http://bit.ly/2GSY9Hk ) extract and run the xiaomi_a1_blok_silme_EDL wait to finish.
5- Download the nougat rom of August 7.8.23_7.1 ( http://bit.ly/2oxybSH ) extract it and flash the miflash
6- After flashing the rom, unlock the bootloader again.
7- Download RB Soft ( http://bit.ly/2t2s1yB )
Open RB soft, click on login, on the "qualcomm" tab and place your imei1 and imei2 and put this file in "QCN"
( http://bit.ly/2FDI20J )
Then click "REPAIR".
Go back to the RB Soft folder and look for the file "injected.qcn", you will use it in the QPST.
8- On your mobile phone, dial *#*#717717#*#* then connect to your computer (put in developer and debug mode).
9- Download and install QPST 2.7 build 422 Qfil ( http://bit.ly/2F8gToZ ) Then open the qpst configuration, it has to be like this ( https://ibb.co/mXUOLc ).
Then go to Starts Client / Software Download. Click the "restore" tab.
In "QCN File" look for the file "injected.qcn" that you had created before, click "start" and you're done. After you're done, restart your phone.
READY, CELLPHONE WITH IMEI.
it's permanen fix ?
can you update to oreo?
Why create a second thread just for updating links when you can make changes in the OP in your previous thread?
https://forum.xda-developers.com/mi-a1/help/repair-imei-a1-t3745668/
 @Logan moderator please merge the two threads or please delete one of the threads.
guy_infinity said:
Why create a second thread just for updating links when you can make changes in the OP in your previous thread?
https://forum.xda-developers.com/mi-a1/help/repair-imei-a1-t3745668/
@Logan moderator please merge the two threads or please delete one of the threads.
Click to expand...
Click to collapse
Take care of your life.
gazzly said:
it's permanen fix ?
can you update to oreo?
Click to expand...
Click to collapse
No, you can not upgrade to oreo, but at least we can use the cell phone.
danswat said:
No, you can not upgrade to oreo, but at least we can use the cell phone.
Click to expand...
Click to collapse
my imei is lossing and reparing 7.8.23 Aug security rom
I can flashing Oreo 8.1.10 rom and no problem my imei is no lossing no edl using and no qfill box using only two programming using and repair imei
Byramklc said:
my imei is lossing and reparing 7.8.23 Aug security rom
I can flashing Oreo 8.1.10 rom and no problem my imei is no lossing no edl using and no qfill box using only two programming using and repair imei
Click to expand...
Click to collapse
Can you help me upgrade? I can not and always lose the imei.
Byramklc said:
my imei is lossing and reparing 7.8.23 Aug security rom
I can flashing Oreo 8.1.10 rom and no problem my imei is no lossing no edl using and no qfill box using only two programming using and repair imei
Click to expand...
Click to collapse
what 2 program u use?
-try change ur partion to a/b and check imei still there?
-reset to factory via setting for encryption your phone again and check again?
i try on 7.8.23 and work, but no luck after ota update or via fastboot rom update,
please help us
xiaomi_a1_blok_silme_EDL dont work(sahara errors in some lines of cmd and stops) dear danswat plz help in detailed steps, "recieved invalid command from the phone" in qpst restore!!!
RbSoft link not working
RB Soft link down
can someone help?
Rb soft 1.6 link https://mega.nz/#!QkNyEL6A!QO5wdSbzO-y1LfUdCoFpAQJqYeYeXiM60rZRqfEHYNA
this software doesn't work sir
TerQQ said:
this software doesn't work sir
Click to expand...
Click to collapse
Yes it works, i already tested, you must open the program as administrator and then when ask for login register and after you can login and use the program
After register and login it says about buying license and i cant use that but i will check it later again becouse fed up with this right now xD
TerQQ said:
After register and login it says about buying license and i cant use that but i will check it later again becouse fed up with this right now xD
Click to expand...
Click to collapse
Use the login data from this file
TerQQ said:
After register and login it says about buying license and i cant use that but i will check it later again becouse fed up with this right now xD
Click to expand...
Click to collapse
I found the RB Soft vers 1.4 at this link https://www.4shared.com/rar/JHv8Vv1Lce/RBSoft_V14_Crack.html
I tested and with this you don't need user or pass, just run the program. (You must dissable any Antivirus, as it detects as Virus, but it isn't)
Edit: Here are the link in Mega: https://mega.nz/#!EtQVxKQJ
mardrest said:
I found the RB Soft vers 1.4 at this link https://www.4shared.com/rar/JHv8Vv1Lce/RBSoft_V14_Crack.html
I tested and with this you don't need user or pass, just run the program. (You must dissable any Antivirus, as it detects as Virus, but it isn't)
Edit: Here are the link in Mega: https://mega.nz/#!EtQVxKQJ
Click to expand...
Click to collapse
In QPST i get "Memory Restore Completed" status and after reboot imei is still 0
ok now i have imei thank you for your help mardrest i will ask you if something will go wrong again
TerQQ said:
In QPST i get "Memory Restore Completed" status and after reboot imei is still 0
Click to expand...
Click to collapse
I found another thread about imei restoring, maybe work for you:
https://www.google.ch/amp/s/forum.x...how-to-restore-imei-permanently-t3759190/amp/
It has a telegram group also

SOLVED:Stuck at PIN input, then reboots

Well, I f*cked up.
Fastboot works, I can flash stock rom via Xiaomi Flash. Flashing completes without any problems. A notification about encypting phone shows up, at 3% it jumps to 100% and resumes boot. Now after each boot, phone freezes at "input your sim pin" and reboots. Over and over again. What can I try, please help :
edited
twister26 said:
There is an reward for whoever helps me solve this issue
Click to expand...
Click to collapse
u try put your sim on other phone and remove the pin from them , maybe the boot skip that part and dont get freeze
dfranco51207 said:
u try put your sim on other phone and remove the pin from them , maybe the boot skip that part and dont get freeze
Click to expand...
Click to collapse
no luck, removed sim and now it reboots as soon as android one text is displayed
I've also tried wiping cache in default recovery, no luck
twister26 said:
no luck, removed sim and now it reboots as soon as android one text is displayed
I've also tried wiping cache in default recovery, no luck
Click to expand...
Click to collapse
Try to format data in twrp or stock recovery.
If it does not work flash an android 8.0 or Nougat ROM. Do not lock the bootloader.
Let me guess. From Pie to Oreo or Nougat?
Mercoory said:
Let me guess. From Pie to Oreo or Nougat?
Click to expand...
Click to collapse
yes, exactly is there a thread already open somewhere here and i missed? last time TWRP was working, I even got a message "your system has been destroyed" or something like that.
sipollo said:
Try to format data in twrp or stock recovery.
If it does not work flash an android 8.0 or Nougat ROM. Do not lock the bootloader.
Click to expand...
Click to collapse
will try!
https://forum.xda-developers.com/mi-a1/how-to/tutorial-downgrade-9-0-to-8-1-edl-imei-t3879624
ccalixtro said:
https://forum.xda-developers.com/mi-a1/how-to/tutorial-downgrade-9-0-to-8-1-edl-imei-t3879624
Click to expand...
Click to collapse
will give it a read, it it works, I'll PM you and you'll give me your paypal address. Fair is fair.
can't unlock OEM, because I can't boot up to developer tools. great, just great. will try to fix that first.
if you can boot to fastboot try to flash stock pie 10.0.4.0 with miflash, after that your device should be able to boot, than unlock OEM and bootloader and downgrade to what version you want
fdc77 said:
if you can boot to fastboot try to flash stock pie 10.0.4.0 with miflash, after that your device should be able to boot, than unlock OEM and bootloader and downgrade to what version you want
Click to expand...
Click to collapse
I can get to fastboot yeah, but MiFlash tool says that remote oem unlock is not allowed. So I'll probably have to open it up for EDL. Reboot to edl isn't working. Thanks for the advice tho.
twister26 said:
I can get to fastboot yeah, but MiFlash tool says that remote oem unlock is not allowed. So I'll probably have to open it up for EDL. Reboot to edl isn't working. Thanks for the advice tho.
Click to expand...
Click to collapse
i had a problem like yours, but i have flashed stock rom in non EDL mode and everything had start to work apart LTE band missing that i restored with qualcomm's tools
which stock rom have you try to flash? are you downgrading from oreo? bootloop on android one logo after downgrading is a common issue due to ARB (anti rollback protection)
twister26 said:
Whoever saves my precious Mi A1 gets 10$ on his paypal.
Click to expand...
Click to collapse
This is ****
This is not XDA spirit
You can get help without to pay
Please cancel the reward, do it. For all the people on this community.
tropbel said:
This is ****
This is not XDA spirit
You can get help without to pay
Please cancel the reward, do it. For all the people on this community.
Click to expand...
Click to collapse
reward is cancelled from this point on i will reward the one who helped me so far tho. still working on solving the problem so winner has not been decided yet.
you don't understand.
There are no winners and no loosers.
You are free to donate to anyone you want, but your post boost and encourages a bad attitude.
If people start to solve only paid problems, the spirit of the community will be destroyed.
The problem is with the Pie specific partition table
I write the whole guide from memory, so it can differ a bit.... I skipped some steps ( erasing, reboot, fastboot mode, TWRP loading via fastboot, OEM unlock )
From previous writings I think you can know the skipped steps.
Keep in mind: It is dangerous, you can loose your IMEI ( it will only work again with Pie - or there are some writings at forum how can you manually change it. ).
Steps:
1 - Backup with TWRP (fastboot) efs,persist,modem & make copy to your computer and or to your cloud provider.
2 - Create a new folder in Internal Storage -> TWRP -> BACKUP -> With a new date directory ( the backup already made one, make a new folder, with different date )
3 - Download someone's older TWRP backup from xda (I cheated, I copied the following links ) :
(I'm still a new user, so can't directly write url's )
Mediafire : https COLON SLASH SLASH bit.ly SLASH 2QU5NtC
Mirror: Google Drive : https COLON SLASH SLASH bit.ly SLASH 2UN1DTo
4 - Unpack, and copy EFS to the folder created 2 point
5 - Fastboot TWRP -> Restore EFS
6 - Flash the Official latest firmware from en.miui.com ( If you want to make sure go with EDL mode )
7 - Now, the IMEI & Mac addresses are missing. Don't panic! Download update with System Updates.
8 - When you are on Pie again, restore your first TWRP (fastboot) persist partition
9 - One more System restore
At this time, you will have IMEI & Mac addressees, and hopefully a working phone.
Hope this helps. The same thing happened with me 2 weeks ago. This is how I solves it.
Thank you, I solved it yesterday. Hopefully this post will come in handy for other people!

Bricked! Anybody has EDL authorized xiaomi account?

Hi,
My phone is stuck in edl mode and i can't flash rom via flashtool because i get authenticatioın failure.
All i need is a person who with EDL Authorized Xiaomi account.
Everything is ready on my pc.
Just connect my pc via teamviewer and login.
Please someone help me
Hello,
I really don't think you will get someone with an EDL Authorized Xiaomi account to help you for free... but it's nice to try. ^^
Good Luck!
Just this morning I solved a brick by simply putting all the commands in sequence contained in the .bat files of the official fastboot global rom, if you want I can help you in this way.
Kodex-99 said:
Just this morning I solved a brick by simply putting all the commands in sequence contained in the .bat files of the official fastboot global rom, if you want I can help you in this way.
Click to expand...
Click to collapse
fastboot commands doen't work on EDL mode
Nvm my acc was not EDL
Micdu70 said:
Hello,
I really don't think you will get someone with an EDL Authorized Xiaomi account to help you for free... but it's nice to try. ^^
Good Luck!
Click to expand...
Click to collapse
it doesnt have to be free.
sercangogercin said:
it doesnt have to be free.
Click to expand...
Click to collapse
Try S-Unlock. I was stuck in EDL mode a couple of weeks back. Those guys fixed it remotely.
Cost me 15 USD I think.
Good luck mate!
nestojean said:
Try S-Unlock. I was stuck in EDL mode a couple of weeks back. Those guys fixed it remotely.
Cost me 15 USD I think.
Good luck mate!
Click to expand...
Click to collapse
How long does it take to enter your teamviewer?
What time did you do it?
^ this guy unbricked my Mi9T 2 weeks ago, after ARB hardbrick via Teamviewer EDL Flash, nice service.
So we're all waiting for a very merry Christmans un-brick story here!
MOD EDIT: quote removed
Lol. Well they need you over in the redmi note 8 pro section. They bricking them phones like there free.
sercangogercin said:
Hi,
My phone is stuck in edl mode and i can't flash rom via flashtool because i get authenticatioın failure.
All i need is a person who with EDL Authorized Xiaomi account.
Everything is ready on my pc.
Just connect my pc via teamviewer and login.
Please someone help me
Click to expand...
Click to collapse
Aynı problemim var. Yardım edebilecek biri var mı? EDL modundayım, sadece yetkili hesaba ihtiyacım var. Herhangi biri teamwiever'e yardım edebilir mi?
MOD EDIT: Please post only in English according to the FORUM RULES,translation added below:
I have the same problem. I'm in EDL mode, I just need an authorized account.
Use QFIL tool
Hi, you can use Qualcomm Flash Image Loader (QFIL) to flash your hard bricked phone. You need a modified no authentication programmer firehose file for your K20 which is not available but for K20 pro it is available(I googled tens of times). Can anyone here upload the modified firehose prog file for K20 or mi 9t? Or share the guidelines for modifying firehose prog file for no authentication?
shinob1 said:
Hi, you can use Qualcomm Flash Image Loader (QFIL) to flash your hard bricked phone. You need a modified no authentication programmer firehose file for your K20 which is not available but for K20 pro it is available(I googled tens of times). Can anyone here upload the modified firehose prog file for K20 or mi 9t? Or share the guidelines for modifying firehose prog file for no authentication?
Click to expand...
Click to collapse
After extensive googling I found that the firehose file for our device is "prog_ufs_firehose_Sdm730_ddr_davinci_sig_rb1.elf"
Google gave few links where the file can be download. I think, I can't post them here as one has to pay to download those files. Perhaps the device is still new and the file not yet freely available online.
Good job bro!
Stillness said:
After extensive googling I found that the firehose file for our device is "prog_ufs_firehose_Sdm730_ddr_davinci_sig_rb1.elf"
Google gave few links where the file can be download. I think, I can't post them here as one has to pay to download those files. Perhaps the device is still new and the file not yet freely available online.
Click to expand...
Click to collapse
Thanks for the file name bro. I finally found "prog_ufs_firehose_Sdm730_ddr_davinci_sig_rb1.elf" for free and still cannot flash using QFIL or QPST. Can mi 9t be flashed with only miflash due to EDL lockdown on xiaomi mobiles(I am stuck on 9008 mode)?
I also tried renaming and copying the modified firehose in the fastboot rom folder and miflash is saying programmer transfer error.
I also contacted authorized mi service center near me and they are saying they have to replace my motherboard (my warranty is lost due to opening of my back cover)and they do not have EDL authorization (which is level 3 they said to me)?
shinob1 said:
Thanks for the file name bro. I finally found "prog_ufs_firehose_Sdm730_ddr_davinci_sig_rb1.elf" for free and still cannot flash using QFIL or QPST. Can mi 9t be flashed with only miflash due to EDL lockdown on xiaomi mobiles(I am stuck on 9008 mode)?
I also tried renaming and copying the modified firehose in the fastboot rom folder and miflash is saying programmer transfer error.
I also contacted authorized mi service center near me and they are saying they have to replace my motherboard (my warranty is lost due to opening of my back cover)and they do not have EDL authorization (which is level 3 they said to me)?
Click to expand...
Click to collapse
I'm at ignorance about QFIL or QPST compatibility with our device. This provides a list of alternative tools to try if that two fails.
If your motherboard is dead, then no flashing will work.
If I may, would you like to share the link where you found the firehose for free?
Link to download
Stillness said:
I'm at ignorance about QFIL or QPST compatibility with our device. This provides a list of alternative tools to try if that two fails.
If your motherboard is dead, then no flashing will work.
If I may, would you like to share the link where you found the firehose for free?
Click to expand...
Click to collapse
Its my pleasure to help you and here is the link:
https://mega.nz/file/f0kBFbKC#stsdUiLg7TF5dTnt11_hBPsBCu2XnA0pq_vkvUeF6hk
You can find our firehose file in the qualcomm folder.
If the link is not working you can google "android for ufs(t) 1.0.6.0" and download it.
Your alternative tools link is redirecting to qfil download. Can you revise the link or share the names here please.
shinob1 said:
Its my pleasure to help you and here is the link:
https://mega.nz/file/f0kBFbKC#stsdUiLg7TF5dTnt11_hBPsBCu2XnA0pq_vkvUeF6hk
You can find our firehose file in the qualcomm folder.
Click to expand...
Click to collapse
Thank you very much.
shinob1 said:
Your alternative tools link is redirecting to qfil download. Can you revise the link or share the names here please.
Click to expand...
Click to collapse
Please refer to the attached text file for the names and the links for the alternatives.
Stillness said:
Thank you very much.
Please refer to the attached text file for the names and the links for the alternatives.
Click to expand...
Click to collapse
Thanks, I tried all these and found the modified programmers are not exactly for my device and realized that service centre is the only way(without exact no auth programmer).
I approached an mi authorized service centre and I am allowed to get inside (they are unaware of 9008 mode) and get my flashing done with EDL authorized account. Thanks to all.
shinob1 said:
Thanks, I tried all these and found the modified programmers are not exactly for my device and realized that service centre is the only way(without exact no auth programmer).
I approached an mi authorized service centre and I am allowed to get inside (they are unaware of 9008 mode) and get my flashing done with EDL authorized account. Thanks to all.
Click to expand...
Click to collapse
Your phone is Mi 9T (davinci) or a different one?
However, glad you finally got your device fixed.

Categories

Resources