Database Users

[STEPS] How to Recover from bad IMEI

My problems starts after i flash SlimSaber over the Oxygen OS
Somehow it erase the EFS
Download the package here https://mega.co.nz/#!c0c1lZ7L!ADILW66W-aG0TNcuDzLd13pK6hjcq7omJhPxMiXUjZo
My case : NO WIFI, NO IMEI, AND NO SIGNAL. And on CM11S (install it via fastboot), and rooted + supersu
I did erase the modemst1, modemst2 and the persist. But still it didn't fix it
And i did try to run some command in the TWRP's terminal, but still not fix
What i did :
1. Download the packages
2. Open CMD and type : (Your phone is still on, and on the homescreen)
adb shell
su
setprop sys.usb.config diag,adb
3. Go to Device Manager, and see A0001 on the Other Devices
4. Right click on it and select Update Driver --> Browse blablabla --> Let me pick blablabla --> Show all devices and next --> Have Disk --> Browse --> Now, go to the downloaded Packages, and see Driver --> Select your OS (Win x64 or x86), in my case it's Win x64. Select Select and Install it anyway
5. Now, you'll see it named HTC Modem, now right click on it, but i forgot which tab that i click to see the COMx part..
6. Now, go to QPST folder, and rename QPST 2.7.411.msi to QPST.2.7.411.msi. And now, open Setup.exe
7. Go to Program FIles(x86), open Qualcomm/QPST/bin/QPSTConfig.exe
8. Now, on the QPST App, select Ports tab --> Add New Ports --> Uncheck Show Serial and USB blablabla. Now, your "modem" will shows there. Make sure that it's the same with COMx in the properties --> Ok
9. Now, press Start Clients --> Restore --> Browse the QCN files on the Downloaded Packages files. And press Start
10. After it "stuck" in 100%, unplug your phone and restart it
11. a) If you have Wifi and Signal, you're done !
b) If you still don't have wifi (Like mine) BUT on About Phone --> Status, the signal shows some number of dBm and ASU ;
To Fix the Signal :
1. Flash the modem that included in the Downloaded Packages
2. Now check
To Fix the Wifi :
Well, this one i found it by myself (i think)
1. Some says that you need to flash ColorOS in order to make it work. But since i don't have ColorOS because of slow download speed, i flash the Hydrogen OS instead
2. I don't know why but the Wifi suddenly work
Now, you should be able to use the Wifi and Mobile Data, and you can flash another ROM
Thanks to @rombdeta for providing the steps and the original thread
Press thanks if it helped you

I was one who messed up with my efs partition and went to no wifi no signal no network
Mine that time i followed almost all procedures from xda but no luck finally i came to rombdeta thread but i actually can't understand his procedure properly tried but no luck
Finally went to service center they flashed oxygen os and everything was came back again they gave me back my phone on the same day but expenses from my home town to service center was 1500 rupees what the f....... K( personally i also tried several times oxygen os but don't know it not worked)
If that time u have posted this thread for how to use @rombdeta procedures properly there will be no head ache.....
Thanx for posting it will be helpful to some one

There is a fix all package on the oneplus forums, that helped me out. I tried everything you stated OP, and my OPO was still not working correctly. After I flashed the OPO windows fix from the forum,my phone is like new. If anyone needs a link, I'll be more then happy to search for it
Sent from my A0001 using Tapatalk

Yes pls supply us the link
Sent from my A0001 using XDA Free mobile app

Here is the thread for the link, yes I'm aware that its posted for the touchscreen fix. What this fix will do is wipe every single partition and reflash it correctly.
https://forums.oneplus.net/threads/touchscreen-issues-patch-from-opo-techsupport.278636/
Here's the link for the download
https://s3.amazonaws.com/oneplussupport/ONEPLUS+ONE-FIX-Windows.zip
Extract the zip, click the read me and run the batch files how it says. I tried every other fix there is, wipe persist, reflash factory image, flash the color is, I mean I tried everything. This is what made my phone fully functional
Sent from my A0001 using Tapatalk

great tutorial X

qbanlinxx said:
Here is the thread for the link, yes I'm aware that its posted for the touchscreen fix. What this fix will do is wipe every single partition and reflash it correctly.
https://forums.oneplus.net/threads/touchscreen-issues-patch-from-opo-techsupport.278636/
Here's the link for the download
https://s3.amazonaws.com/oneplussupport/ONEPLUS+ONE-FIX-Windows.zip
Extract the zip, click the read me and run the batch files how it says. I tried every other fix there is, wipe persist, reflash factory image, flash the color is, I mean I tried everything. This is what made my phone fully functional
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Thanks for your information

These needs pinning it would help loads of people who done the same thing!
Make an EFS backup!

Thanks this fixed my phone but it has disabled LTE for some reason. I know it flashed the Chinese EFS but I have made the changes to the nvram and it still doesn't connect to the late network.

Pxulll said:
These needs pinning it would help loads of people who done the same thing!
Make an EFS backup!
Click to expand...
Click to collapse
My guide is already pinned at the top of our section and it contains instructions on backing up EFS.

Well, glad I found this thread. I'm going to try these next. I flashed it back to stock in hopes that would fix my problem. But still got a case of the reboots and a shady IMEI. Man.. Why did I not back up my efs!!! Ugh.. So one a good note, this is fixable, right? Or am I gonna have to go ahead and get the OP2? My OP1 is not even a yr old I should be able to get it repaired, right?

evertking said:
Well, glad I found this thread. I'm going to try these next. I flashed it back to stock in hopes that would fix my problem. But still got a case of the reboots and a shady IMEI. Man.. Why did I not back up my efs!!! Ugh.. So one a good note, this is fixable, right? Or am I gonna have to go ahead and get the OP2? My OP1 is not even a yr old I should be able to get it repaired, right?
Click to expand...
Click to collapse
Look at my posts a few pages back, I was suffering from the same and got it fixed
Sent from my A0001 using Tapatalk

qbanlinxx said:
Look at my posts a few pages back, I was suffering from the same and got it fixed
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply. Im busy right now but will try this later. I was worried I had a brick on my hands. So did you lose 4g and if you flash ROMs do you have to apply the fix every time?

I'm trying your method to get back my imei #. I tried every other method in the forum but no gain. Please help me I'm unable to install the drivers. When trying to install driver It says " The specified location does not contain information about your hardware". Please please please help me.
Thanks
Edit:
I managed to install the drivers on windows 10 and restored the imei but now I'm getting only 3g not networks when selecting 2g or 4g. I flashed the XNPH44S-modem from TWRP also. But still no 2g/LTE
Please help.

Worked for me thanks!!!!

It worked me Mate ... Thank You So much ... I recovered my IMEI and Signal is working fine too

fixed mine by just flashing color os on fastboot

Can I fix IMEI on a official rom?? I don't have IMEI on my official rom but my sim slot works and my wi-fi works. should I flash the XNPH44S-modem?
please I really want to get my phone to working again. I am so close!

hasanjaved said:
I'm trying your method to get back my imei #. I tried every other method in the forum but no gain. Please help me I'm unable to install the drivers. When trying to install driver It says " The specified location does not contain information about your hardware". Please please please help me.
Thanks
Edit:
I managed to install the drivers on windows 10 and restored the imei but now I'm getting only 3g not networks when selecting 2g or 4g. I flashed the XNPH44S-modem from TWRP also. But still no 2g/LTE
Please help.
Click to expand...
Click to collapse
Would you be kind enought to share the drivers pls? Link is dead.
And can you tell me how to install them?
Tnx in advance.

Hello !
can you please share only the QCN file from the archive ?
as I believe it is the unique thing I need right now, and the archive is a big download...
thanks
AndreIrawan97 said:
My problems starts after i flash SlimSaber over the Oxygen OS
Somehow it erase the EFS
Download the package here https://mega.co.nz/#!c0c1lZ7L!ADILW66W-aG0TNcuDzLd13pK6hjcq7omJhPxMiXUjZo
My case : NO WIFI, NO IMEI, AND NO SIGNAL. And on CM11S (install it via fastboot), and rooted + supersu
I did erase the modemst1, modemst2 and the persist. But still it didn't fix it
And i did try to run some command in the TWRP's terminal, but still not fix
What i did :
1. Download the packages
2. Open CMD and type : (Your phone is still on, and on the homescreen)
adb shell
su
setprop sys.usb.config diag,adb
3. Go to Device Manager, and see A0001 on the Other Devices
4. Right click on it and select Update Driver --> Browse blablabla --> Let me pick blablabla --> Show all devices and next --> Have Disk --> Browse --> Now, go to the downloaded Packages, and see Driver --> Select your OS (Win x64 or x86), in my case it's Win x64. Select Select and Install it anyway
5. Now, you'll see it named HTC Modem, now right click on it, but i forgot which tab that i click to see the COMx part..
6. Now, go to QPST folder, and rename QPST 2.7.411.msi to QPST.2.7.411.msi. And now, open Setup.exe
7. Go to Program FIles(x86), open Qualcomm/QPST/bin/QPSTConfig.exe
8. Now, on the QPST App, select Ports tab --> Add New Ports --> Uncheck Show Serial and USB blablabla. Now, your "modem" will shows there. Make sure that it's the same with COMx in the properties --> Ok
9. Now, press Start Clients --> Restore --> Browse the QCN files on the Downloaded Packages files. And press Start
10. After it "stuck" in 100%, unplug your phone and restart it
11. a) If you have Wifi and Signal, you're done !
b) If you still don't have wifi (Like mine) BUT on About Phone --> Status, the signal shows some number of dBm and ASU ;
To Fix the Signal :
1. Flash the modem that included in the Downloaded Packages
2. Now check
To Fix the Wifi :
Well, this one i found it by myself (i think)
1. Some says that you need to flash ColorOS in order to make it work. But since i don't have ColorOS because of slow download speed, i flash the Hydrogen OS instead
2. I don't know why but the Wifi suddenly work
Now, you should be able to use the Wifi and Mobile Data, and you can flash another ROM
Thanks to @rombdeta for providing the steps and the original thread
Press thanks if it helped you
Click to expand...
Click to collapse

[FACTORY FIRMWARE] [FLASH STOCK ROM] Nokia X2DS RM-1013 059V782 v2.1.0.13

NOTE-1:
I'm not a developer or something even near to that. All information provided here is copied from different internet sources like this & this & this and many others.
It's according to best of my knowledge and I'll not be responsible for any harm to you or your device. It works perfectly for me. You may try it on your own risk.
Save / backup your data before continuing. Whole device will be wiped.
NOTE-2:
If you have a custom recovery, install Stock ROM (v2.1.0.13 or v2.1.0.12) instead.
If you don't have a custom recovery, you may get one here or here.
If your device is bricked and can't boot into recovery or bootloader mode (read here what it is), proceed.
NOTE-3:
Given firmware link is v2.1.0.13 for device 059V782. There are some variants of Nokia X2DS (other product codes) which were officially updated from 2.1.0.11 to 2.1.0.12, so they dont support version 2.1.0.13.
Make sure your device supports 2.1.0.13 by googling your product code (written on back of device, see by removing back cover) or you may get in trouble. In case if you need 2.1.0.12, download it from some other link and follow the instructions given here.
NOTE-4:
Hard-bricked devices (with no buttons working, no Download Mode) may also be recovered by this method but with a slightly different procedure.
QFIL can also be used instead of NCS, but NCS feels a kinda little bit official way
REQUIREMENTS:
A PC with Windows and uninterrupted power supply. (I used Dell Inspiron 15R with Windows 8.1 and 10).
A USB data cable.
Fully charged phone, soft-bricked at maximum i.e. no recovery, no boot accessible
STEPS:
Download and Install NCS to your PC.
Copy UserGroupsConfiguration.cfg to "C:\Program Files (x86)\Nokia\Nokia Care Suite\Product Support Tool For Store 5".
Download Firmware and extract to "C:\ProgramData\Nokia\Packages\Products\RM-1013".
Launch NCS > Product Support Tool for Store 5.
At Sign-In screen, click Work Offline.
Disable Automatic Product Selection.
Go to File > Open Product and select RM-1013.
Click Programming > Recovery. Downloaded Firmware must be listed there.
Click Start and follow instructions. DO NOT INTERRUPT FLASHING PROCESS OR IT MAY HARD BRICK YOUR PHONE LEAVING IT USELESS.
Wait a few minutes and done. You have a newly purchased phone in your hands if all goes well.

Thanks for making a proper post for this.:good:

Devnikolus said:
Thanks for making a proper post for this.:good:
Click to expand...
Click to collapse
There are many others​ but mine is simple and solid

mirfatif said:
NOTE:
I'm not a developer or something even near to that. All information provided here is copied from different internet sources and according to best of my knowledge.
I'll not be responsible for any harm to you or your device. It works perfectly for me. You may try it on your own risk.
Save / backup your data before continuing. Whole device will be wiped.
REQUIREMENTS:
A PC with Windows and uninterrupted power supply. (I used Dell Inspiron 15R with Windows 8.1 and 10).
A USB data cable.
Fully charged phone, soft-bricked at maximum i.e. no recovery, no boot accessible
STEPS:
Download and Install NCS to your PC.
Copy UserGroupsConfiguration.cfg to "C:\Program Files (x86)\Nokia\Nokia Care Suite\Product Support Tool For Store 5".
Download Firmware and extract to "C:\ProgramData\Nokia\Packages\Products\RM-1013".
Launch NCS > Product Support Tool for Store 5.
At Sign-In screen, click Work Offline.
Disable Automatic Product Selection.
Go to File > Open Product and select RM-1013.
Click Programming > Recovery. Downloaded Firmware must be listed there.
Click Start and follow instructions. DO NOT INTERRUPT FLASHING PROCESS OR IT MAY HARD BRICK YOUR PHONE LEAVING IT USELESS.
Wait a few minutes and done. You have a newly purchased phone in your hands if all goes well.
Click to expand...
Click to collapse
Bro, i got an error with
Initializing WinUSB with device handle. The parameter is incorrect
Exception:
System.ComponentModel.Win32Exception (0x80004005): Initializing WinUSB with device handle. The parameter is incorrect
at Nokia.Merak.UsbDeviceIo.WinUsbIo.CheckError(Boolean expression, String message)
at Nokia.Merak.UsbDeviceIo.WinUsbIpen()
at Nokia.Merak.UsbDeviceIo.UsbDeviceIo..ctor(String devicePath)
at Nokia.Delta.Messaging..ctor(ConnectionDetails details)
at Nokia.CareSuite.PlugIns.DeltaRecovery.RecoveryDialog.RecoveryDialogModel.ChangeDeviceMode()
at Nokia.CareSuite.PlugIns.DeltaRecovery.RecoveryDialog.RecoveryDialogModel.Flash()
at Nokia.CareSuite.PlugIns.DeltaRecovery.RecoveryDialog.RecoveryDialogModel.<HandleDownloadVariantPackageCompleted>b__15(Object state)
please help phone not booting

himanagendra said:
Bro, i got an error with
Initializing WinUSB with device handle. The parameter is incorrect
Exception:
System.ComponentModel.Win32Exception (0x80004005): Initializing WinUSB with device handle. The parameter is incorrect
at Nokia.Merak.UsbDeviceIo.WinUsbIo.CheckError(Boolean expression, String message)
at Nokia.Merak.UsbDeviceIo.WinUsbIpen()
at Nokia.Merak.UsbDeviceIo.UsbDeviceIo..ctor(String devicePath)
at Nokia.Delta.Messaging..ctor(ConnectionDetails details)
at Nokia.CareSuite.PlugIns.DeltaRecovery.RecoveryDialog.RecoveryDialogModel.ChangeDeviceMode()
at Nokia.CareSuite.PlugIns.DeltaRecovery.RecoveryDialog.RecoveryDialogModel.Flash()
at Nokia.CareSuite.PlugIns.DeltaRecovery.RecoveryDialog.RecoveryDialogModel.<HandleDownloadVariantPackageCompleted>b__15(Object state)
please help phone not booting
Click to expand...
Click to collapse
You followed instructions 100%? Install NCS from my given link. It contains all necessary drivers including Emergency Driver. Use some other USB port on your PC. Try reinstalling NCS or try on different PC / different OS. You may also try QFIL if NCS doesn't work.

mirfatif said:
You followed instructions 100%? Install NCS from my given link. It contains all necessary drivers including Emergency Driver. Use some other USB port on your PC. Try reinstalling NCS or try on different PC / different OS. You may also try QFIL if NCS doesn't work.
Click to expand...
Click to collapse
thank god you are still there. okay here is the result.
Phone is not responding.
charging - > no indication, no screen
Volume down/up + power -> nothing. no response.
Do you know any softwares which can flash my phone without using volume up/down + power .
tnzzz for help

himanagendra said:
thank god you are still there. okay here is the result.
Phone is not responding.
charging - > no indication, no screen
Volume down/up + power -> nothing. no response.
Do you know any softwares which can flash my phone without using volume up/down + power .
tnzzz for help
Click to expand...
Click to collapse
Hmm it's hard bricked. No problem. Follow this thread. Things are explained more clearly there.

mirfatif said:
Hmm it's hard bricked. No problem. Follow this thread. Things are explained more clearly there.
Click to expand...
Click to collapse
thank you very much for your help but unfortunately it didn't work bcz as i told, nothing will comeup and even the buttons don't work.
In that case, please follow this thread

himanagendra said:
thank you very much for your help but unfortunately it didn't work bcz as i told, nothing will comeup and even the buttons don't work.
In that case, please follow this thread
Click to expand...
Click to collapse
Good. I suggested you to use QFIL already For me, both NCS and QFIL work but I didn't try any other product code firmware except 059V782 which is my device code.
What's your product code? 059V787 or 059V782? I'm gonna add a warning to my thread about this.
There are some devices which were officially updated from 2.1.0.11 to 2.1.0.12, so they don't support 2.1.0.13 as per my understanding.

mirfatif said:
Good. I suggested you to use QFIL already For me, both NCS and QFIL work but I didn't try any other product code firmware except 059V782 which is my device code.
What's your product code? 059V787 or 059V782?
Click to expand...
Click to collapse
Yeah...i thought you would give me a direct link. Anyways thanks for u help.
But bro, please mention that v2.1.0.13 don't suit for every Nokia x2 device. It doesn't suit the Indian version.

himanagendra said:
Yeah...i thought you would give me a direct link. Anyways thanks for u help.
But bro, please mention that v2.1.0.13 don't suit for every Nokia x2 device. It doesn't suit the Indian version.
Click to expand...
Click to collapse
Yes.
mirfatif said:
Good. I suggested you to use QFIL already For me, both NCS and QFIL work but I didn't try any other product code firmware except 059V782 which is my device code.
What's your product code? 059V787 or 059V782? I'm gonna add a warning to my thread about this.
There are some devices which were officially updated from 2.1.0.11 to 2.1.0.12, so they don't support 2.1.0.13 as per my understanding.
Click to expand...
Click to collapse

mirfatif said:
Yes.
Click to expand...
Click to collapse
Bro, do you know how to solve the sim 1 issue? i mean, my sim network is being recognized by the nokia x2 but, there is no signal for that.

himanagendra said:
Bro, do you know how to solve the sim 1 issue? i mean, my sim network is being recognized by the nokia x2 but, there is no signal for that.
Click to expand...
Click to collapse
Well, personally I never faced this issue. But you can try flashing @yoAeroA00 Custom Firmware. It flashes radio as well as other related partitions.

Quote:
Originally Posted by mirfatif
i cant find "C:\ProgramData\Nokia\Packages\Products\RM-1013".plz help me...

shuvo.khan97 said:
Quote:
Originally Posted by mirfatif
i cant find "C:\ProgramData\Nokia\Packages\Products\RM-1013".plz help me...
Click to expand...
Click to collapse
Create it if not found

Thx a lot, its helped me
Sent from my MI 5 using XDA-Developers Legacy app

For me please rm-1013:
2.0.0.11
059WOWO
thank you

how to connect mobile with pc in recovery mod or fast mod or normal mode i have custom rom and my sims are not working i want to stock rom again but when i select progmramming then recovery then there is no file shown in box for your information i attached img plz check and tell me the solution

lovegrw said:
how to connect mobile with pc in recovery mod or fast mod or normal mode i have custom rom and my sims are not working i want to stock rom again but when i select progmramming then recovery then there is no file shown in box for your information i attached img plz check and tell me the solution
Click to expand...
Click to collapse
Just flash stock rom zip before installing whole firmware

not able to get .xml file while flashing nokia x2
when i click on load xml in QFILL then i get new window but it shows no raw program file.
In reality it exist in extracted folder 'rm-1013 ' . When i type .xml in window it shows no file match.
please tell how to get this to proceed further.

Anyone know why MI NOTE 2 always no network with any global stable ROM ...

Hello guys...
as of my title my Mi note 2 cannot use for phone, no network always.
I brought to service center and he said network module broken, cause my screen broken i cannot claim my guarantee.
Is there any suggest for me ? For any task exclude phone is work fine, but i founded yesterday one application not detected fingerprint but on another phone MI 5 (MIUI 9) that application founded fingerprint, why this one?

So , are you saying that you flashed with MiFlash some global stable versions and you are not receiving network?
From when you have this problem?
A rom flash caused this? An update?

No with miflash but with download rom or i use update with updater... I just founded if my imei is unknown, can you help me to fill my imei as on the box sticker.. i think the problem i cannot have network cause it is .. i have granted to unlock my phone cause imei unknown i cannot do that.. and flash with miflash.. i am not remember exactly cause the first have this my sim card still micro not nano .. so maybe few month later.. exactly from new one...

gochengz said:
No with miflash but with download rom or i use update with updater... I just founded if my imei is unknown, can you help me to fill my imei as on the box sticker.. i think the problem i cannot have network cause it is .. i have granted to unlock my phone cause imei unknown i cannot do that.. and flash with miflash.. i am not remember exactly cause the first have this my sim card still micro not nano .. so maybe few month later.. exactly from new one...
Click to expand...
Click to collapse
Download the fastboot global beta rom from miui forum and open the flash all without storage.bat file then reboot to fastboot and plug your phone then hold the power button and let it boot. See if this works.

alexmanu1 said:
Download the fastboot global beta rom from miui forum and open the flash all without storage.bat file then reboot to fastboot and plug your phone then hold the power button and let it boot. See if this works.
Click to expand...
Click to collapse
How to fill imei unknown to that phone?

See if this works and we will see another method

alexmanu1 said:
See if this works and we will see another method
Click to expand...
Click to collapse
see what bro ... ??
when Xiaomi connected to PC on device manager not shown COM port Qualcomm ?

gochengz said:
see what bro ... ??
when Xiaomi connected to PC on device manager not shown COM port Qualcomm ?
Click to expand...
Click to collapse
I can't explain it all for you , you need to do some research on your own.
Follow this guide to install adb and fastboot on your PC : https://forum.xda-developers.com/showthread.php?t=2317790
Then open the flash_all_except_storage.bat and plug the phone in.

I have the same problem here...already tried mi flash in fastboot mode but still got invalid imei

idLockjb said:
I have the same problem here...already tried mi flash in fastboot mode but still got invalid imei
Click to expand...
Click to collapse
And meeeee

alexmanu1 said:
See if this works and we will see another method
Click to expand...
Click to collapse
Do u have another method beside this...i already tried this one but still cant get the imei

idLockjb said:
Do u have another method beside this...i already tried this one but still cant get the imei
Click to expand...
Click to collapse
There is a way to get your signal back , but your imei will be 00 or something like that.
Maybe you will have more luck than others.
You need to have root on your phone.
Also, adb and fastboot drivers are a must.
You will need to follow these 2 tutorials:
https://xiaomifirmware.com/guides-and-tips/enter-diag-mode-backup-imei-using-qpst/
http://en.miui.com/thread-315233-1-1.html
On the second one, it doesn't matter is for Mi4-C, it will be the same steps for our device.
Be careful as this method involves high level "stuff" . Don't skip steps and keep the first .qcn file safe.
I have a question for you. Your MEID is just like the one from the box right now?

alexmanu1 said:
There is a way to get your signal back , but your imei will be 00 or something like that.
Maybe you will have more luck than others.
You need to have root on your phone.
Also, adb and fastboot drivers are a must.
You will need to follow these 2 tutorials:
https://xiaomifirmware.com/guides-and-tips/enter-diag-mode-backup-imei-using-qpst/
http://en.miui.com/thread-315233-1-1.html
On the second one, it doesn't matter is for Mi4-C, it will be the same steps for our device.
Be careful as this method involves high level "stuff" . Don't skip steps and keep the first .qcn file safe.
I have a question for you. Your MEID is just like the one from the box right now?
Click to expand...
Click to collapse
Im sorry im a newbie with mi device, where is the meid in device? I didnt find it in 'about phone' view

idLockjb said:
Im sorry im a newbie with mi device, where is the meid in device? I didnt find it in 'about phone' view
Click to expand...
Click to collapse
It's in About phone -> Status -> IMEI information. If you don't have it there, try to see if *#06# shows it.
If you can't find it , no problem.

alexmanu1 said:
It's in About phone -> Status -> IMEI information. If you don't have it there, try to see if *#06# shows it.
If you can't find it , no problem.
Click to expand...
Click to collapse
Already tried *#06# it say invalid imei

alexmanu1 said:
It's in About phone -> Status -> IMEI information. If you don't have it there, try to see if *#06# shows it.
If you can't find it , no problem.
Click to expand...
Click to collapse
My meid are another no the box
I have another mi note 2, working ASAP, with meid and IMEI correct
but dont know how yo change MEID on qcn file, only how yo change IMEI and changing IMEI no work, because the MEID, how to change MEID on qcn?

BadWolfYe said:
My meid are another no the box
I have another mi note 2, working ASAP, with meid and IMEI correct
but dont know how yo change MEID on qcn file, only how yo change IMEI and changing IMEI no work, because the MEID, how to change MEID on qcn?
Click to expand...
Click to collapse
I really don't know, sir... I've tried for some time to find it and i did not...

Meid recovered, whith qcn hex editing
Now need recover IMEI and MAC ADRESS

BadWolfYe said:
Meid recovered, whith qcn hex editing
Now need recover IMEI and MAC ADRESS
Click to expand...
Click to collapse
Can you share with us how you found it?
EDIT: Nevermind XD

alexmanu1 said:
Can you share with us how you found it?
EDIT: Nevermind XD
Click to expand...
Click to collapse
Jajajajaja
You know the actual situation problem ??
3G signal, work
If i disconect and reconect wifi sim 1 = off
Dual sim work, and sim 2 no affected on wifi sim1 bug, IMEI 's are 0/unknown
And Mi Cloud say no valid IMEI/WIFI MAC
But MEID are correct and i have a great poor 2g/3g signal! Hahahahahaha

SOLVED:Stuck at PIN input, then reboots

Well, I f*cked up.
Fastboot works, I can flash stock rom via Xiaomi Flash. Flashing completes without any problems. A notification about encypting phone shows up, at 3% it jumps to 100% and resumes boot. Now after each boot, phone freezes at "input your sim pin" and reboots. Over and over again. What can I try, please help :

edited

twister26 said:
There is an reward for whoever helps me solve this issue
Click to expand...
Click to collapse
u try put your sim on other phone and remove the pin from them , maybe the boot skip that part and dont get freeze

dfranco51207 said:
u try put your sim on other phone and remove the pin from them , maybe the boot skip that part and dont get freeze
Click to expand...
Click to collapse
no luck, removed sim and now it reboots as soon as android one text is displayed
I've also tried wiping cache in default recovery, no luck

twister26 said:
no luck, removed sim and now it reboots as soon as android one text is displayed
I've also tried wiping cache in default recovery, no luck
Click to expand...
Click to collapse
Try to format data in twrp or stock recovery.
If it does not work flash an android 8.0 or Nougat ROM. Do not lock the bootloader.

Let me guess. From Pie to Oreo or Nougat?

Mercoory said:
Let me guess. From Pie to Oreo or Nougat?
Click to expand...
Click to collapse
yes, exactly is there a thread already open somewhere here and i missed? last time TWRP was working, I even got a message "your system has been destroyed" or something like that.
sipollo said:
Try to format data in twrp or stock recovery.
If it does not work flash an android 8.0 or Nougat ROM. Do not lock the bootloader.
Click to expand...
Click to collapse
will try!

https://forum.xda-developers.com/mi-a1/how-to/tutorial-downgrade-9-0-to-8-1-edl-imei-t3879624

ccalixtro said:
https://forum.xda-developers.com/mi-a1/how-to/tutorial-downgrade-9-0-to-8-1-edl-imei-t3879624
Click to expand...
Click to collapse
will give it a read, it it works, I'll PM you and you'll give me your paypal address. Fair is fair.
can't unlock OEM, because I can't boot up to developer tools. great, just great. will try to fix that first.

if you can boot to fastboot try to flash stock pie 10.0.4.0 with miflash, after that your device should be able to boot, than unlock OEM and bootloader and downgrade to what version you want

fdc77 said:
if you can boot to fastboot try to flash stock pie 10.0.4.0 with miflash, after that your device should be able to boot, than unlock OEM and bootloader and downgrade to what version you want
Click to expand...
Click to collapse
I can get to fastboot yeah, but MiFlash tool says that remote oem unlock is not allowed. So I'll probably have to open it up for EDL. Reboot to edl isn't working. Thanks for the advice tho.

twister26 said:
I can get to fastboot yeah, but MiFlash tool says that remote oem unlock is not allowed. So I'll probably have to open it up for EDL. Reboot to edl isn't working. Thanks for the advice tho.
Click to expand...
Click to collapse
i had a problem like yours, but i have flashed stock rom in non EDL mode and everything had start to work apart LTE band missing that i restored with qualcomm's tools
which stock rom have you try to flash? are you downgrading from oreo? bootloop on android one logo after downgrading is a common issue due to ARB (anti rollback protection)

twister26 said:
Whoever saves my precious Mi A1 gets 10$ on his paypal.
Click to expand...
Click to collapse
This is ****
This is not XDA spirit
You can get help without to pay
Please cancel the reward, do it. For all the people on this community.

tropbel said:
This is ****
This is not XDA spirit
You can get help without to pay
Please cancel the reward, do it. For all the people on this community.
Click to expand...
Click to collapse
reward is cancelled from this point on i will reward the one who helped me so far tho. still working on solving the problem so winner has not been decided yet.

you don't understand.
There are no winners and no loosers.
You are free to donate to anyone you want, but your post boost and encourages a bad attitude.
If people start to solve only paid problems, the spirit of the community will be destroyed.

The problem is with the Pie specific partition table
I write the whole guide from memory, so it can differ a bit.... I skipped some steps ( erasing, reboot, fastboot mode, TWRP loading via fastboot, OEM unlock )
From previous writings I think you can know the skipped steps.
Keep in mind: It is dangerous, you can loose your IMEI ( it will only work again with Pie - or there are some writings at forum how can you manually change it. ).
Steps:
1 - Backup with TWRP (fastboot) efs,persist,modem & make copy to your computer and or to your cloud provider.
2 - Create a new folder in Internal Storage -> TWRP -> BACKUP -> With a new date directory ( the backup already made one, make a new folder, with different date )
3 - Download someone's older TWRP backup from xda (I cheated, I copied the following links ) :
(I'm still a new user, so can't directly write url's )
Mediafire : https COLON SLASH SLASH bit.ly SLASH 2QU5NtC
Mirror: Google Drive : https COLON SLASH SLASH bit.ly SLASH 2UN1DTo
4 - Unpack, and copy EFS to the folder created 2 point
5 - Fastboot TWRP -> Restore EFS
6 - Flash the Official latest firmware from en.miui.com ( If you want to make sure go with EDL mode )
7 - Now, the IMEI & Mac addresses are missing. Don't panic! Download update with System Updates.
8 - When you are on Pie again, restore your first TWRP (fastboot) persist partition
9 - One more System restore
At this time, you will have IMEI & Mac addressees, and hopefully a working phone.
Hope this helps. The same thing happened with me 2 weeks ago. This is how I solves it.

Thank you, I solved it yesterday. Hopefully this post will come in handy for other people!

No IMEI and Unknown baseband !

Hi Guys, 6 months ago I lost my IMEI. I don't know what happened but I tried everything nothing helps me. There is only one hope. I need someone's QCN backup file. if I get a QCN file I can restore it to my phone and I will change the IMEI number
Thank you.

How to share qcn file??

06swax said:
How to share qcn file??
Click to expand...
Click to collapse
Zip the file. In the additional option click manage attachment and upload it. Thank you

Anyone please help me!!!

Please use Qualcomm flash tool..
nesan95 said:
Anyone please help me!!!
Click to expand...
Click to collapse
Please use Qualcomm read and write imei tool...it will repair your imei..

Aditya kukreti said:
Please use Qualcomm read and write imei tool...it will repair your imei..
Click to expand...
Click to collapse
What is Qualcomm read and write imei tool? Can you provide download link?

Read and write imei tool..
nesan95 said:
What is Qualcomm read and write imei tool? Can you provide download link?
Click to expand...
Click to collapse
Download link of read and write imei tool...https://androidmtk.com/download-readwrite-tool

Aditya kukreti said:
Download link of read and write imei tool...https://androidmtk.com/download-readwrite-tool
Click to expand...
Click to collapse
Not working. when I press read button I got connection fail error.

Please read the instructions given there
nesan95 said:
Not working. when I press read button I got connection fail error.
Click to expand...
Click to collapse
Please download the drivers of your device and install it and then connect it to the pc..and read the following instructions given their..mine imei was also corrupted couple of years ago..I was not able to make calls or use the internet connection..I found this tool and it repaired my imei..please make sure u flash ur original imei which is given in the box..

Aditya kukreti said:
Please download the drivers of your device and install it and then connect it to the pc..and read the following instructions given their..mine imei was also corrupted couple of years ago..I was not able to make calls or use the internet connection..I found this tool and it repaired my imei..please make sure u flash ur original imei which is given in the box..
Click to expand...
Click to collapse
I already installed the driver but as you said I downloaded the driver again and install it. My port is COM5 so I changed it to COM5 Still failed to read/write But I could able to connect QPST and restore the qcn successfully.
Did you face unknown baseband ??

No I didn't face unknown baseband
nesan95 said:
I already installed the driver but as you said I downloaded the driver again and install it. My port is COM5 so I changed it to COM5 Still failed to read/write But I could able to connect QPST and restore the qcn successfully.
Did you face unknown baseband ??
Click to expand...
Click to collapse
I face only null imei..but I faced the issue on another device not on nexus 6p..