Installing Android 7 on P9 Lite VNS-DL00 - Huawei P9 Lite Questions & Answers

In Huawei p9 lite VNS-DL00 I wanted to change the location to the European one to upload Android 7. I unlocked the bootloader using the PotatoNV method and uploaded twrp. Then I installed oeminfo L31C432 DS (link). Now I am trying to upload the VNSL31C432B416 software link) I tried the dload method, but at 5% the software install failed, so I tried like this of the guide (link). After the installation of this tutorial, it freezes at the boot screen. How to put it on its feet and upload android 7?

Dżejkob98 said:
In Huawei p9 lite VNS-DL00 I wanted to change the location to the European one to upload Android 7. I unlocked the bootloader using the PotatoNV method and uploaded twrp. Then I installed oeminfo L31C432 DS (link). Now I am trying to upload the VNSL31C432B416 software link) I tried the dload method, but at 5% the software install failed, so I tried like this of the guide (link). After the installation of this tutorial, it freezes at the boot screen. How to put it on its feet and upload android 7?
Click to expand...
Click to collapse
Here you go
https://forum.xda-developers.com/t/updating-huawei-p9-lite-h3g-it-to-nougat.4374095/post-86084295

-Alf- said:
Here you go
https://forum.xda-developers.com/t/updating-huawei-p9-lite-h3g-it-to-nougat.4374095/post-86084295
Click to expand...
Click to collapse
during flash update с432b370.zip I get this error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Dżejkob98 said:
during flash update с432b370.zip I get this error:
View attachment 5571101
Click to expand...
Click to collapse
Maybe because you don't read carefully.
First you need to install the update c432b370.zip, then you can install eu_L31.zip.
Also you can try this Installation method 1 (use downloaded files).

-Alf- said:
Maybe because you don't read carefully.
First you need to install the update c432b370.zip, then you can install eu_L31.zip.
Also you can try this Installation method 1 (use downloaded files).
Click to expand...
Click to collapse
first installs "update c432b370.zip" and I get this error as above.
using Installation method 1 at 5% I get Software install failed

Dżejkob98 said:
first installs "update c432b370.zip" and I get this error as above.
using Installation method 1 at 5% I get Software install failed
Click to expand...
Click to collapse
1. I'm not the owner of that account on cloud.mail.ru, so if the file is really corrupt, I can't help you. Try searching for another FW vns-l31c432b370.
2. Are you using TWRP 3.0.2.0 from a link?
3. In fastboot mode run commands :
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
Some might fail, so don't worry about it.

.

-Alf- said:
1. Nie jestem tego konta na cloud.mail, więc jeśli plik jest naprawdę. nie mogę ci pomóc. FW vns-c432b370
2. Czy z programu TWRP 3.0.2.0 linku?
3. Wprowadzę szybkie uruchomienie polecenia:
Fastboot oem pobierz numer kompilacji
Fastboot oem pobierz model produktu
fastboot getvar kraj dostawcy
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
opublikuj wyniki.
Niektóre mogą zawieść, więc nie martw się tym.
Click to expand...
Click to collapse
i installed it twrp ( link )
in the photo the results fastboot

Okay, download B160 full link (it may lock your bootloader!), use dload method. And try again install B370 via TWRP or use dload method. It should work.
And English please!

-Alf- said:
Okay, download B160 full link (it may lock your bootloader!), use dload method. And try again install B370 via TWRP or use dload method. It should work.
And English please!
Click to expand...
Click to collapse
I successfully installed B160, then B370 and update_data_full_VNS-L31_hw_eu.zip
Now I wanted to install B416, but still with the dload method at 5% it shows Software install failed.
How to install B416?

Dżejkob98 said:
but still with the dload method at 5% it shows Software install failed.
Click to expand...
Click to collapse
Did you perform a factory reset after installing the B370? It is necessary. And check your current build number in Settings > About phone.
Dżejkob98 said:
How to install B416?
Click to expand...
Click to collapse
Unzip SDupdate_Package.tar.gz .
Copy the entire dload folder (without unpacking it!!!) to the root directory of the Micro SD card. Power off, and use three buttons combo.

-Alf- said:
Did you perform a factory reset after installing the B370? It is necessary. And check your current build number in Settings > About phone.
Unzip SDupdate_Package.tar.gz .
Copy the entire dload folder (without unpacking it!!!) to the root directory of the Micro SD card. Power off, and use three buttons combo.
Click to expand...
Click to collapse
current build number is VNS-L31C432B370
I did a factory reset
When installing B416 with the dload method at 5%, Software install failed.

Dżejkob98 said:
Software install failed
Click to expand...
Click to collapse
Nothing else? "Incompatibility with current version" "Update package does not exist" etc.?

-Alf- said:
Nothing else? "Incompatibility with current version" "Update package does not exist" etc.?
Click to expand...
Click to collapse

Dżejkob98 said:
View attachment 5571819
Click to expand...
Click to collapse
incompatibility? Strange, it worked for others...
Do you have access to the Project Menu? (* # * # 2846579# * # *) If not, you don't have eu.zip completely installed.

-Alf- said:
incompatibility? Strange, it worked for others...
Do you have access to the Project Menu? (* # * # 2846579# * # *) If not, you don't have eu.zip completely installed.
Click to expand...
Click to collapse
I have access to the Project Menu

Dżejkob98 said:
I have access to the Project Menu
Click to expand...
Click to collapse
Then I don't know what the problem is, sorry...

-Alf- said:
Then I don't know what the problem is, sorry...
Click to expand...
Click to collapse
Try to update via HiSuite , OTA or eRecovery.

-Alf- said:
Try to update via HiSuite , OTA or eRecovery.
Click to expand...
Click to collapse
neither of these methods works

Related

CWM for Nokia X2.

Hello! And, yup, it is finally done. We have custom recovery.
You can say Thanks to GRIP95 and ruslan_3_.
Installing via fastboot
Fastboot -i 0x0421 flash recovery "Recovery name.img"
Altivex said:
Hello! And, yup, it is finally done. We have custom recovery.
You can say Thanks to GRIP95 and ruslan_3_.
Installing via fastboot
Fastboot -i 0x0421 flash recovery "Recovery name.img"
Click to expand...
Click to collapse
have u tested on ur device ???
Yes. It`s working. Dudes made a wonderful job!
Altivex said:
Yes. It`s working. Dudes made a wonderful job!
Click to expand...
Click to collapse
when i try to install via fastboot ,,, it says < waiting for device > ,, i installed X2 drivers,,, whats wrong ? :/
Here are all answers. I think problem in ini file.
Altivex said:
Hello! And, yup, it is finally done. We have custom recovery.
You can say Thanks to GRIP95 and ruslan_3_.
Installing via fastboot
Fastboot -i 0x0421 flash recovery "Recovery name.img"
Click to expand...
Click to collapse
From where did you get this? Also, add some screenshots.
From where did you get this?
Click to expand...
Click to collapse
From 4pda.ru)
And , i cant promise this, but maybe, only maybe, today evening we`ll get custom kernel.
Altivex said:
Here are all answers. I think problem in ini file.
Click to expand...
Click to collapse
i installed Nokia x drivers from http://tools.nokia.com/nokia-x/repository/nokia_x_usb_driver.zip
i dont get any ini file :/ check this pic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i dont get any ini file :/ check this pic
Click to expand...
Click to collapse
Then create it =)
Paste this:
# ANDROID 3RD PARTY USB VENDOR ID LIST -- DO NOT EDIT.
# USE 'android update adb' TO GENERATE.
# 1 USB VENDOR ID PER LINE.
and vendor code from dev instruction.
Altivex said:
Then create it =)
Paste this:
# ANDROID 3RD PARTY USB VENDOR ID LIST -- DO NOT EDIT.
# USE 'android update adb' TO GENERATE.
# 1 USB VENDOR ID PER LINE.
and vendor code from dev instruction.
Click to expand...
Click to collapse
still having waiting for device issue
Can I install it directly by X2.
Which application can do it
Sent from my NokiaX2DS using XDA Free mobile app
Finally i installed CWM on my device ,,, it works like a charm
here is screenshot :-
it not work for me
i can flash this but when i go to recovery it blank, just "NOKIA" @@
please check recovery file
and can u post the stock file for me to check flashboot
thank u
Download this :-
https://www.dropbox.com/s/47jswar03sk1mei/nokia-x2-recovery.zip
who has problem with fastboot,,,
make sure u have installed adb drivers properly than run start.bat
than press 2 button,,, it will install cwm
Stackin said:
Download this :-
https://www.dropbox.com/s/47jswar03sk1mei/nokia-x2-recovery.zip
who has problem with fastboot,,,
make sure u have installed adb drivers properly than run start.bat
than press 2 button,,, it will install cwm
Click to expand...
Click to collapse
this method work for me. So i believe that it will work for all of us
good luck guys ^^
help
Stackin said:
Download this :-
who has problem with fastboot,,,
make sure u have installed adb drivers properly than run start.bat
than press 2 button,,, it will install cwm
Click to expand...
Click to collapse
start.bat file you can transfer it to english language ? :good:
help
finished... but I can't boot recovery ( philz )
help...
Try to unlock bootloader before flashing recovery.
fastboot -i 0x0241 oem unlock
then flash recovery.
Altivex said:
Try to unlock bootloader before flashing recovery.
fastboot -i 0x0241 oem unlock
then flash recovery.
Click to expand...
Click to collapse
GRIP95 and ruslan_3_ these russian developers are interested to make custom rom or kernel for Nokia X2 ???
they can make good rom but i dont know they have time or not to make rom
I followed the instructions to flash the CWM and fastboot reported success.
However when I reset the phone to enter recovery, all I get is the NOKIA logo.
When I try to reset the phone to enter bootloader mode, fastboot on my PC no longer recognizes it.
So now what can I do?
Stackin said:
Download this :-
https://www.dropbox.com/s/47jswar03sk1mei/nokia-x2-recovery.zip
who has problem with fastboot,,,
make sure u have installed adb drivers properly than run start.bat
than press 2 button,,, it will install cwm
Click to expand...
Click to collapse
Link doesn't work, the file has been removed.

The Absolute way to " Re-lock " The Bootloader

good morning everybody ..
after a long tired journey with staying awake till the morning I finally Figured out a way to Re-lock your Bootloader
Yes People it works in every HUAWEI MT7 Brands . :laugh:
First Of all you should Have these Requirement :
1- Your appreciated software Updated or using currently " Depends on your Brand " TL-09 or TL-10 ... etc. "
2- HuaweiUpdateExtractor and you can download it from here : http://filaty.com/Exe " Arabic website "
3- an ADB Tool you can get it from here : http://forum.xda-developers.com/mate-7/general/huawei-ascent-mate-7-unlock-recovery-t2941525
Now ,,,
1- Extract the software by using HuaweiUpdateExtractor " Easy to Use "
open it and select your UPDATE.APP and select these Three items with right click you will find " Extract "
- recovery.img
- boot.img
-system.img
you should Extract in the same ADB Folder . it will look like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then :
>Connect the device to computer
>Setting – About phone – Build number click it for 3-5 times
>Setting – Develop options – USB debugging enabled
>Disconnect the device – Connect the device to computer authorize the Developer Mode
>WIN+R – CMD – D: – CD MT7 – adb devices (show something like Y9KF0923F898343 device)
>adb reboot-bootloader
>fastboot devices
Click to expand...
Click to collapse
2- Now do these Steps as its mentioned one by one :
fastboot flash recovery recovery.img
Then Press Enter
fastboot flash boot boot.img
Then Press Enter
fastboot flash system system.img
* the system.img will take a while so don't Be afraid :fingers-crossed:
* After each command it will say " OK "
3- use this relocking command " Fastboot oem relock XXXXXXXXXXXXX "
X= your Unlock Number.
TDAAAAAAAAAAAAAAAAAAAA :laugh:
Congrats. your Bootloader Is relocked :good:
waiting for your comments Guys
BTW ..
I was able to root again and restore back the original recovery and relock the boot loader
got error root type is risk
danger2u said:
got error root type is risk
Click to expand...
Click to collapse
U did something wrong then retry and do it by order u wint get it any error
MADOLOGY said:
U did something wrong then retry and do it by order u wint get it any error
Click to expand...
Click to collapse
so the deal is this way
flash the original firmware and recovery
boot the phone
then go back to bootloader
give this comand: fastboot oem relock 1122************
phone relocked
i relocked my MATE 7
Can you give screen after relock boot loader. What it's write on screen Lock or Relock???
danger2u said:
got error root type is risk
Click to expand...
Click to collapse
danger2u said:
so the deal is this way
flash the original firmware and recovery
boot the phone
then go back to bootloader
give this comand: fastboot oem relock 1122************
phone relocked
i relocked my MATE 7
Click to expand...
Click to collapse
Yep step by step and it will be relocked as i mentioned
chudy_85 said:
Can you give screen after relock boot loader. What it's write on screen Lock or Relock???
Click to expand...
Click to collapse
It will says relocked
I read somewhere even after relocking bootloader you can tell it's been unlocked because the writing changes a different colour which indicates it has been unlocked. Because I was planning unlocking then relocking it if anything went wrong with it in the future so I can send it back to Huawei to get it fixed.
Can someone confirm this that when relocked there are no signs of it being unlocked
MADOLOGY said:
good morning everybody ..
after a long tired journey with staying awake till the morning I finally Figured out a way to Re-lock your Bootloader
Yes People it works in every HUAWEI MT7 Brands . :laugh:
First Of all you should Have these Requirement :
1- Your appreciated software Updated or using currently " Depends on your Brand " TL-09 or TL-10 ... etc. "
2- HuaweiUpdateExtractor and you can download it from here : http://filaty.com/Exe " Arabic website "
3- an ADB Tool you can get it from here : http://forum.xda-developers.com/mate-7/general/huawei-ascent-mate-7-unlock-recovery-t2941525
Now ,,,
1- Extract the software by using HuaweiUpdateExtractor " Easy to Use "
open it and select your UPDATE.APP and select these Three items with right click you will find " Extract "
- recovery.img
- boot.img
-system.img
you should Extract in the same ADB Folder . it will look like this
Then :
2- Now do these Steps as its mentioned one by one :
fastboot flash recovery recovery.img
Then Press Enter
fastboot flash boot boot.img
Then Press Enter
fastboot flash system system.img
* the system.img will take a while so don't Be afraid :fingers-crossed:
* After each command it will say " OK "
3- use this relocking command " Fastboot oem relock XXXXXXXXXXXXX "
X= your Unlock Number.
TDAAAAAAAAAAAAAAAAAAAA :laugh:
Congrats. your Bootloader Is relocked :good:
waiting for your comments Guys
Click to expand...
Click to collapse
Huawei Update Extractor is officially available on xda you know ...
worstenbrood said:
Huawei Update Extractor is officially available on xda you know ...
Click to expand...
Click to collapse
Well I didn't notice that. Thank you
Hello,
try ist, but after "fastboot oem relock xxxxxx --> get this:
FAILED <remote: data parse fail>
Did anyóne know whats wrong?
bvt-1 said:
Hello,
try ist, but after "fastboot oem relock xxxxxx --> get this:
FAILED <remote: data parse fail>
Did anyóne know whats wrong?
Click to expand...
Click to collapse
What a recovery is installed?
cargobr151 said:
What a recovery is installed?
Click to expand...
Click to collapse
... send from hell, hahahahahaaaa ...
Stock-recovery ...
Did it exactly like shown in first post,I think
And surely the code is right...
Try Backup & restore -> Factory data reset from settings menu. (german: Sichern & zurücksetzen)
This wipes all include internal storage but not the external sd card.
I'll try it, thx for your help
... send from hell, hahahahahaaaa ...
I keep getting this error: failed remote: images sign check fail
please help me
MADOLOGY said:
U did something wrong then retry and do it by order u wint get it any error
Click to expand...
Click to collapse
got error root type is risk please help me
pooyan25 said:
got error root type is risk please help me
Click to expand...
Click to collapse
Same here, tried everything as advised but Nothing.
Guys ?
What is the point of re-locking bootloader ??
So the warranty is working if bootloader is relocked???

P9 Lite bricked

Hello,
I was on B336 and wanted to root it. All good, I followed the steps, and accidentally wiped cache&dalvik... Bootloop. Then I tried to downgrade to MM... No success... After that, something told me to wipe system, data, Dalvik, cache, everything except for Internal Storage, phone storage... I tried then to flash EMUI 5 beta 336... It didn't work. I tried then to flash Meticulus TWRP instead of Revolution TWRP... It did not work... I tried to dload MM stock, it did not work...
I'm stuck with:
-No OS
-Revolution TWRP
-Meticulus TWRP doesn't boot
Is there anything I can try to get it booting or I can throw the phone into the garbage bin?
I even tried to flash Meticulus TWRP with the RevolutionRecovery (I know, I know) and of course it did not work...
If you are with no OS
flash via fastboot system.img boot.img cust.img and recovery.img using app extractor
I don't remember the exact order (yes, you must flash them in a specific order)
diorenzo said:
If you are with no OS
flash via fastboot system.img boot.img cust.img and recovery.img using app extractor
I don't remember the exact order (yes, you must flash them in a specific order)
Click to expand...
Click to collapse
Found the order:
- Fastboot flash boot boot.img
- Fastboot flash system system.img
- Fastboot flash cust cust.img
But I can't understand the part about app extractor. Can you explain please?
There is an app called app extractor (you can easily find here in the forums)
You put your Update.app file (the one you should put on the dload folder) and the app extract you these files
After you flash them via adb
I had your problem and solved using this
(Sorry for my english)
@diorenzo Ok, I got it, I extract from the .APP file with Huawei Update Extractor. What should I do next?
Go on fastboot mode with the phone
And via pc flash the files
diorenzo said:
Go on fastboot mode with the phone
And via pc flash the files
Click to expand...
Click to collapse
I know that... I meant, after I flash those files... Is there something else?
Asphyxiate666 said:
I know that... I meant, after I flash those files... Is there something else?
Click to expand...
Click to collapse
Nope, just reboot and wait
(It can take a while)
diorenzo said:
Nope, just reboot and wait
(It can take a while)
Click to expand...
Click to collapse
Thank you very much man, I will try what you told me. I hope it will work.
Don't worry
Flashing system.img gives me an error:
sparse flash write failure
Click to expand...
Click to collapse
@diorenzo
What error?
diorenzo said:
What error?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Did you flash boot.img?
diorenzo said:
Did you flash boot.img?
Click to expand...
Click to collapse
Yes, and it flashed successfully.
Mmhh, really don't know
Try again
diorenzo said:
Mmhh, really don't know
Try again
Click to expand...
Click to collapse
Tried two times with no success... I'll try switching ports.
Sounds similar to what I had. Take a look here.
The solution in brief was:
1. Go into bootloader to flash recovery (I used Revolution Recovery)
2. In recovery, flash OEM info.
3. Then used the 3-button method to install stock version for the appropriate model (which I could see from OEM info).
4. Unlocked bootloader, triggering a factory reset. (I was stuck in infinite boot before this point.)
Click to expand...
Click to collapse
Zeruno said:
Sounds similar to what I had. Take a look here.
Click to expand...
Click to collapse
It was what i was thinking
I though he could flash recovery via fastboot (but i didn't remember he had to flash oeminfo)

How to install NXT-L29C185B560 (Official) Firmware. (Guide with download links)

NXT-L29C185B560
Firmware: B560
Device name: Huawei Mate 8
Model number: Huawei NXT-L29
Build Number: NXT-L29C185B560
EMUI Version: 5.0
Android Version: 7.0
Update Version: v74783
Region: Middle East, Africa
Firmware
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1582/g104/v74783/f1/full/changelog.xml
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1582/g104/v74783/f1/full/filelist.xml
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1582/g104/v74783/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...mer.huawei.com/minisite/HiSuite_en/index.html)
3- Install HiSuite on your Computer
4- Connect your phone to HiSuite
5- Go to Update>
6- Now wait for some time to complete the process.
7- Done.
8- Did I help you? A ''thanks :good:'' would be highly appreciated
Step by Step Guide (For Rooted Phones)
1- Download these 3 files (update.zip, update_full_hw_meafnaf.zip, supersu_v2.79_sr2.zip)
1.1- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1582/g104/v74783/f1/full/update.zip
1.2- http://update.hicloud.com:8180/TDS/...ll/hw/meafnaf/update_data_full_hw_meafnaf.zip
1.3- http://www.sillanwali.com/downloads/supersu_v2.79_sr2.zip
2- Copy these 3 files (update.zip, update_full_hw_meafnaf.zip, supersu_v2.79_sr2.zip) into SD Card
3- Download TWRP Recovery
http://sillanwali.com/downloads/twrp-3.0.3.img
4- Run into Fastboot (https://forum.xda-developers.com/mate-8/general/fastboot-erecovery-recovery-upgrade-mode-t3543441)
adb devices
adb reboot bootloader
fastboot oem device-info
fastboot oem unlock ****************
To obtain bootloader unlock code, go to https://emui.huawei.com/en/plugin/unlock/index
Huawei ID is the account you use to access all Huawei services.
Log in to your Huawei ID. Phone/Email. Password ********
fastboot flash recovery (PATH-TO)\twrp-3.0.3.img
5- Reboot into Recovery Mode (https://forum.xda-developers.com/mate-8/general/fastboot-erecovery-recovery-upgrade-mode-t3543441)
5.1- Go to: Wipe > format > type Yes
5.2- Back again, then wipe> advance wipe> (data, dalvik, cache, system, internal data)
5.3- Don't reboot after wipe
6- Root & Firmware Installation
6.1- Install supersu_v2.79_sr2.zip (Don't reboot after install)
6.2- Install update_full_hw_meafnaf.zip (Don't reboot after install)
ignore unmounting \cust, userdata, system error
6.3- Install update.zip (Reboot when success)
7- Factory Reset & Relock Bootloader
7.1- Factory Reset after success 100%. After that you will get NXT-L09C185B560 (Official) Firmware.
7.2- Run Fastboot Mode
fastboot oem relock ****************
7.3- Select yes from phone.
7.3- Your phone will be automatically Factory Reset.
8- Did I help you? A ''thanks :good:'' would be highly appreciated
Quick as usual
bluheart said:
Quick as usual
Click to expand...
Click to collapse
:good:
I just tried via hisuite its not working? Also a few users are reporting issues with bluetooth not working? and no keyboard comes with the build?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5- Reboot into Recovery Mode (https://forum.xda-developers.com/mat...-mode-t3543441)
5.1- Go to: Wipe > format > type Yes
Wipe "Fail" How to fix?
full rom can be flashed over firmware B320?
bissa said:
full rom can be flashed over firmware B320?
Click to expand...
Click to collapse
Nope , didn't work for me
Dload Method 1/2 like L29C432B560 is not available for L29C185B560?
I have the same problem. Does not work with dload(
Anyone has solution for that?
Link for (update_full_hw_meafnaf) not working
can you fix it Please.
unbreakable1ali said:
Nope , didn't work for me
Click to expand...
Click to collapse
Links updated, download again.
Azazell83 said:
5- Reboot into Recovery Mode (https://forum.xda-developers.com/mat...-mode-t3543441)
5.1- Go to: Wipe > format > type Yes
Wipe "Fail" How to fix?
Click to expand...
Click to collapse
Screenshot, please.
Problem with BT
Hello,
I'm the only one with a bluetooth not working after flash ?
If i roll back to previous rom, bluetooth working again...
music player & theme app updated?
I rollback to B200. B560 is OTA, not is FULL for C185! Bluetooth not working, options is laggs etc.
Azazell83 said:
I rollback to B200. B560 is OTA, not is FULL for C185! Bluetooth not working, options is laggs etc.
Click to expand...
Click to collapse
B560 is full, see screenshot
https://dl.xda-developers.com/4/0/4....png?key=URuK4-f9-3ulIHp-2GvKGw&ts=1487330818
aliishmas said:
music player & theme app updated?
Click to expand...
Click to collapse
Yes
sillanwali said:
B560 is full, see screenshot
https://dl.xda-developers.com/4/0/4....png?key=URuK4-f9-3ulIHp-2GvKGw&ts=1487330818
Click to expand...
Click to collapse
Screenshots not working, please fix , BTW. B560 is FULL, but not C185! Is full for others models Mate 8. On Firmware Finder we I see only OTA version. We must waiting for FULL.
SOrry for my bad english
Azazell83 said:
Screenshots not working, please fix , BTW. B560 is FULL, but not C185! Is full for others models Mate 8. On Firmware Finder we I see only OTA version. We must waiting for FULL.
SOrry for my bad english
Click to expand...
Click to collapse
Please, find Attachment
Hm yes this is Full. But I havent updater from B200 This is your screenshot?

B371 update for vns-l21c432?

This update for p9 lite B371?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you cant see picture here is link
https://yadi.sk/i/sGrM8Zhz3GkMjJ
Yes
This is awesome!
Have you installed it? And if yes, is it working as it should work? Camera...?
Tried to install it using 3 buttons method, but it failed at 5%.
I'm on B161.
I just updated my vnsl21c432 to b370 from b170.
1. copy update.zip and updata_data_full to sd card
2. boot to twrp
3. flash both zips WITHOUT booting inbetween
3a (there will probably be an error about mounting data, there was in my case)
3b1 DONT BOOT and go to twrp > wipe > data > change filesystem > choose F2FS (was not an option in my case, so i just chose FAT)
3b2 change filesystem of /data AGAIN, this time back to EXT4
3c flash update_data_full AGAIN
4. shut down the device. DON'T BOOT
5. extract recovery.img from UPDATE.APP using Huawei Update Extractor
6. phone turned off, hold volume down and plug in the usb cable to boot into fastboot
7. flash stgock recovery you extracted at step 5 with this command fastboot flash recovery recovery.img
8. NOW BOOT into nougat
9. factory reset
Prior to factory resetting I noticed no apps were msising, BT, WIFI, camera all working.
Now I'm going to try and root it.
zgomot said:
I just updated my vnsl21c432 to b370 from b170.
1. copy update.zip and updata_data_full to sd card
2. boot to twrp
3. flash both zips WITHOUT booting inbetween
3a (there will probably be an error about mounting data, there was in my case)
3b1 DONT BOOT and go to twrp > wipe > data > change filesystem > choose F2FS (was not an option in my case, so i just chose FAT)
3b2 change filesystem of /data AGAIN, this time back to EXT4
3c flash update_data_full AGAIN
4. shut down the device. DON'T BOOT
5. extract recovery.img from UPDATE.APP using Huawei Update Extractor
6. phone turned off, hold volume down and plug in the usb cable to boot into fastboot
7. flash stgock recovery you extracted at step 5 with this command fastboot flash recovery recovery.img
8. NOW BOOT into nougat
9. factory reset
Prior to factory resetting I noticed no apps were msising, BT, WIFI, camera all working.
Now I'm going to try and root it.
Click to expand...
Click to collapse
Is it better to install it in TWRP or using the system updater? Because I sent the update to the system updater and its downloading now...
E bas sporo ide upadte. Ja ga skidam kroz sistem. Tek je na 2%
very slow-going update. I'm taking him through the system. It was only at 2%
crowbgd said:
E bas sporo ide upadte. Ja ga skidam kroz sistem. Tek je na 2%
very slow-going update. I'm taking him through the system. It was only at 2%
Click to expand...
Click to collapse
Pokusaj da vratis default proxy (none), pusti nesto na youtube-u i bice brze.
Try to change the proxy settings to none after the download starts and play a videos from youtube and it'll download faster.
Mislis na telefonu da pustim Youtube?
You mean on the phone to let Youtube?
crowbgd said:
Mislis na telefonu da pustim Youtube?
You mean on the phone to let Youtube?
Click to expand...
Click to collapse
Yes.
Nope,now is stoped and popup notification Network is unstable. Pls try later .Im paused Update,back to Proxi non,and now go with normal speed.
crowbgd said:
Nope,now is stoped and popup notification Network is unstable. Pls try later .
Click to expand...
Click to collapse
Go into the system updater and press resume. It works for me. And it worked before.)
You have PM
Magisk installed. Root access present. Viper4Android installed.
So far, so good.
can't update via Dload method ;/
Johnny TDN said:
can't update via Dload method ;/
Click to expand...
Click to collapse
Try the TWRP method. I posted a short guide a few posts back.
zgomot said:
Try the TWRP method. I posted a short guide a few posts back.
Click to expand...
Click to collapse
thanks.
After instalation, app twin and user settings are gone.
In the beta version, they were there.
Heh download upadte,and verification is not pass?
Did anyone successull update to B371 using Firware Finder? Any confirmation?
Successfully installed it using the system updater. The update has finished downloading, the phone rebooted into twrp and installed the update.

Categories

Resources