Database Users

GUIDE - Install TWRP Recovery and Root MOTO E Phone

WARNING!
Your warranty is void if you follow the given instruction in this guide. Read all the instruction very carefully and Perform everything at your own risk.
This guide is only for the MOTO E android smartphone. Don’t try this method on any of other Android devices, It may hard brick your device. So, first confirm your phone model number in your android phone settings. To do this Go the Settings page of your device and check out the “About Device” option.
PRE-REQUISITES AND REQUIREMENTS
1. BACKUP YOUR ANDROID DATA
2. INSTALL MOTO E DRIVERS
3. ENABLE USB DEBUGGING MODE
4. CHARGE YOU ANDROID
If your device switched off during this process, it could damage or brick the device. Make sure that your Android battery is full charge or near about 50-70% battery level.
HOW TO INSTALL TWRP & ROOT MOTO E
Step 1. Download the Fastboot files for MOTE E and extract the folder on your desktop.
Step 2. Download The TWRP recovery from here (Rename the file to recovery.img) and extract in the same folder as of step 1.
Step 3. Download The SuperSU from here and copy it into the root of your internal memory,
Step 4. Now all the important files are with your. First you have to unlock the bootloader of your device. Read here.
Step 5. Connect your phone to PC and Reboot to bootloader by pressing VolumeDown + Power button for about 6-7 seconds.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 6. Go to the Fastboot folder in step 1, Do Shift + RightClick in empty space in the folder without selecting anything, Select Open a command window here.
Step 7. Now you will see the command prompt window on your screen. In the command prompt window, you need to enter the below mentioned command;
fastboot flash recovery recovery.img
Step 8. Press Volume Down to select recovery on fastboot menu, then press Volume Up to confirm your choice to boot into recovery
Step 9. Now touch doesn’t work in recovery straight away, so wait 60 seconds without touching the phone, The phone screen will go blank.
Step 10. Press power button and do swipe to unlock to get your touch working again! Select Install, scroll down and find the SuperSU Zip downloaded in step 3.
Step 11. Swipe to confirm, wait untill the flash is complete and then select reboot. First reboot will take some time, so no need to worry.
Now check your MOTO E app drawer, There should be SuperSU installed. Congratulations you are rooted!
via @howtorootmobile

I think so this guide is already available!!

TheStrix said:
I think so this guide is already available!!
Click to expand...
Click to collapse
Yeah I did that guide earlier!

recovery flash error
hey dude, i was trying to flash twrp n root but i have got an error. i have posted a ss, pls do help. thanks

5644red said:
hey dude, i was trying to flash twrp n root but i have got an error. i have posted a ss, pls do help. thanks
Click to expand...
Click to collapse
Write
Code:
mfastboot flash recovery recovery.img
it will work!

deej_roamer said:
Write
Code:
mfastboot flash recovery recovery.img
it will work!
Click to expand...
Click to collapse
Thanks for the help buddy but still it isnt working.

5644red said:
Thanks for the help buddy but still it isnt working.
Click to expand...
Click to collapse
Download another version of mfastboot, or simply just fastboot, or try from scratch again!
I saw earlier your mfastboot folder has recovery.img, so cannot be a misplace error!
Still check again it is there! Otherwise, do what i wrote in first line!

deej_roamer said:
Download another version of mfastboot, or simply just fastboot, or try from scratch again!
I saw earlier your mfastboot folder has recovery.img, so cannot be a misplace error!
Still check again it is there! Otherwise, do what i wrote in first line!
Click to expand...
Click to collapse
tried like 5 or 6 times buddy.. still no use.. i was able to unlock bootlocker without any trouble so i hope there is no trouble with moto drivers, i feel it might be due to fastboot file.. ill try again soon.. thanks

Can you please tell me if i will be able to install the 4.4.3 update after flashing custom recovery. Thanks in advance

Ccceenu said:
Can you please tell me if i will be able to install the 4.4.3 update after flashing custom recovery. Thanks in advance
Click to expand...
Click to collapse
No you need stock recovery!
But its alright you can revert back to custom recovery from here
So go back and enjoy custom recovery,
And if you still prefer not to change your recovery, you can try this guide!

deej_roamer said:
No you need stock recovery!
But its alright you can revert back to custom recovery from here
So go back and enjoy custom recovery,
And if you still prefer not to change your recovery, you can try this guide!
Click to expand...
Click to collapse
Thanks for your reply..I read that somewhere that during updates it checks for stock recovery..so i refrained from flashing custom recovery ... there is another question if you can answer...will the procedure of rooting will change in the 4.4.3 version. Thanks in advance

Ccceenu said:
Thanks for your reply..I read that somewhere that during updates it checks for stock recovery..so i refrained from flashing custom recovery ... there is another question if you can answer...will the procedure of rooting will change in the 4.4.3 version. Thanks in advance
Click to expand...
Click to collapse
No it wouldn't

moto e
i unlocked my bootloader can i directly install supersu from recovery without flashing custom recovery?

I guess....
5644red said:
hey dude, i was trying to flash twrp n root but i have got an error. i have posted a ss, pls do help. thanks
Click to expand...
Click to collapse
Did you make sure that you actually 'Opened' the 'fastboot' folder and then press shift and right click....?

having same problem
5644red said:
Thanks for the help buddy but still it isnt working.
Click to expand...
Click to collapse
Hey did u problem got sorted as I am having the same problem as u, kindly help me if anyone can

I tried to install twrp recovery but in cmd its shows an error
Error while loading recovery.img

Can I change my recovery from cwm to twrp
Sent from my Moto E using XDA Free mobile app

I am getting "partition size mismatch" error when i try to flash the TWRP recovery.

[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo]

[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo]
Reboot to EDL mode from FASTBOOT!
No more Test Point Method needed ​
Technical Details:
Redmi Note 3 support rebooting to EDL in Android Bootloader aboot module (the "reboot-edl" command) but fastboot utility doesn't recognize "reboot-edl" in the command line and refuses to sent the command to the device. Since FastBoot command protocol is simple and text-based, it is enough to send a packet containing "reboot-edl" text over USB. The simplest way to do that is to patch Windows fastboot.exe file, replacing "reboot-bootloader" text with "reboot-edl". As "reboot-bootloader" string is found in the command line, fastboot.exe sends the same constant string to the device. So if "reboot-bootloader" is replaced with "reboot-edl", you can specify "reboot-edl" in the command line and the same text will be sent to the device.
New Update: Fastboot updated to latest version.
Tutorial:
1. Download the Fastboot_edl-v2.zip from Here.
2. Extract the zip in your desktop
3. Open the folder and double Click on Reboot.bat
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Reboot your device to Fastboot Mode by pressing
Vol Down + Power button and connect your device with PC and Press Enter.
5. Your Device will be rebooted to EDL!
6. Now flash your Fastboot Rom with Mi Flash Tool to Unbrick your Mi Note 3. ​
Proof:
Thanks to @emuzychenko for the Idea!

This is AWESOME!! Just tested and worked amazingly.
Thank you!
Edit: the included command prompt didn't work for me though, launched standard and traversed to this folder

It would've been better if the source of this guide is also mentioned, just my thoughts
Sent from my Redmi Note 3 using XDA-Developers mobile app

Harish_Kumar said:
It would've been better if the source of this guide is also mentioned
Click to expand...
Click to collapse
Especially since most of text had been copied "as is".

Please add this to op
=> https://youtu.be/-6uErg52nKs

kaushal64 said:
Please add this to op
=> https://youtu.be/-6uErg52nKs
Click to expand...
Click to collapse
I have updated the fastboot.exe and the method also. Update your video with this and I will add it to OP.

I had replaced link for modified fastboot file please add it to op.

Harish_Kumar said:
It would've been better if the source of this guide is also mentioned, just my thoughts
Click to expand...
Click to collapse
emuzychenko said:
Especially since most of text had been copied "as is".
Click to expand...
Click to collapse
Thumbs up!

This is great
My problem solved
Many thanks

not working for me...redmi note 3 pro sd, rom 7.2.7.0.0. it says something like "your phone enter edl mode successfully", but it simply restarts and enter Android OS...

Zarko007 said:
not working for me...redmi note 3 pro sd, rom 7.2.7.0.0. it says something like "your phone enter edl mode successfully", but it simply restarts and enter Android OS...
Click to expand...
Click to collapse
Send me your current emmc_appsboot.mbn and I will check what is happening wrong there.

BRoy_98 said:
Send me your current emmc_appsboot.mbn and I will check what is happening wrong there.
Click to expand...
Click to collapse
Where to find it?

Zarko007 said:
Where to find it?
Click to expand...
Click to collapse
You can find it in the fastboot rom. Or if you have recovery rom, then go to the firmware-update folder in the zip there you will find it.

BRoy_98 said:
You can find it in the fastboot rom. Or if you have recovery rom, then go to the firmware-update folder in the zip there you will find it.
Click to expand...
Click to collapse
Maybe stupid question, but wouldn't phone go to edl mode (with red led flashing) before flashing rom and what then mbn file has to do? According to your manual it is the last step?
thanks

Zarko007 said:
not working for me...redmi note 3 pro sd, rom 7.2.7.0.0. it says something like "your phone enter edl mode successfully", but it simply restarts and enter Android OS...
Click to expand...
Click to collapse
Is your device bricked or you want to flash an official miui rom? Since your rom looks like a distributor rom not an official rom.
Sent from my kenzo using Tapatalk

sator02 said:
Is your device bricked or you want to flash an official miui rom? Since your rom looks like a distributor rom not an official rom.
Sent from my kenzo using Tapatalk
Click to expand...
Click to collapse
No, my device is not bricked, it has locked bootloader. I received code from xiaomi to unlocked bootloader but it constantly stops at 50%, and I found out that it can't be unlocked without china dev rom, but no rom can be installed with locked bootloader I only want to flash an official miui rom to be able to receive updates...Xiaomi really made this too complicated....

Zarko007 said:
No, my device is not bricked, it has locked bootloader. I received code from xiaomi to unlocked bootloader but it constantly stops at 50%, and I found out that it can't be unlocked without china dev rom, but no rom can be installed with locked bootloader I only want to flash an official miui rom to be able to receive updates...Xiaomi really made this too complicated....
Click to expand...
Click to collapse
Don't use this tool if your device is not bricked, your rom is a distributor rom that's why you cannot unlock your device, you have to flash miui rom prior to unlocking, you can do it thru edl mode using adb, search on miui forums and you'll find it.
Edit: check this out: http://en.miui.com/thread-235865-1-1.html
Sent from my kenzo using Tapatalk

Zarko007 said:
No, my device is not bricked, it has locked bootloader. I received code from xiaomi to unlocked bootloader but it constantly stops at 50%, and I found out that it can't be unlocked without china dev rom, but no rom can be installed with locked bootloader I only want to flash an official miui rom to be able to receive updates...Xiaomi really made this too complicated....
Click to expand...
Click to collapse
If your device is not bricked, then you can reboot to EDL mode from adb. Do this to reboot to edl from adb:
1. Connect your device to PC.
2. Open adb and type: adb devices and press enter to see your device if it is connected properly.
3. When you can see your device ID, type: adb reboot edl and press enter. It will reboot your device to EDL mode.
4. Now flash your rom with Mi Flash.

BRoy_98 said:
If your device is not bricked, then you can reboot to EDL mode from adb. Do this to reboot to edl from adb:
1. Connect your device to PC.
2. Open adb and type: adb devices and press enter to see your device if it is connected properly.
3. When you can see your device ID, type: adb reboot edl and press enter. It will reboot your device to EDL mode.
4. Now flash your rom with Mi Flash.
Click to expand...
Click to collapse
I have tried it already many Times but no success...

Zarko007 said:
I have tried it already many Times but no success...
Click to expand...
Click to collapse
This must be driver problem. Install MI PC suite and it will install all necessary drivers. Then try it again.

how to brick Meizu m3 note? thanks for your help!

ppl would get worried about this title, but I can definitely tell you that I really neet to brick it!!
I've tried the following methods:
1. dd if=/dev/zero of=/dev/block/platform/mtk-msdc.0/by-name/lk
2. fastboot
3. flashfire, cannot log in sys, but still alive!
any custom rec? TWRP or ?
all failed..plz post your solution here!

lemon721 said:
ppl would get worried about this title, but I can definitely tell you that I really neet to brick it!!
I've tried the following methods:
1. dd if=/dev/zero of=/dev/block/platform/mtk-msdc.0/by-name/lk
2. fastboot
3. flashfire, cannot log in sys, but still alive!
any custom rec? TWRP or ?
all failed..plz post your solution here!
Click to expand...
Click to collapse
Flash a ROM not intended for your device?

Soft or hard brick?

RAZERZDAHACKER said:
Flash a ROM not intended for your device?
Click to expand...
Click to collapse
nope..it does not have custom rec

es0tericcha0s said:
Soft or hard brick?
Click to expand...
Click to collapse
both r fine..

Do "fastboot erase boot" then "fastboot erase recovery" then "fastboot erase system". May I ask, why do you want it bricked?

Ahh !!! yoy flashed wrong file in wrong file system.....never do such stuff....as meizu's bootloader locked you can't do anything now....try to flash system.ing via adb

meizu m3 note L681H adb flash or fastboot flash how?
i have a problem like this. my meizu m3 note. it works not correctly. i need to flash it with update.zip file. i can get shell from adb with
adb shell
but i can get root permission i dont know why. can any one tell me how can i flash my meizu m3 note via adb or fastboot

sensey666 said:
i have a problem like this. my meizu m3 note. it works not correctly. i need to flash it with update.zip file. i can get shell from adb with
adb shell
but i can get root permission i dont know why. can any one tell me how can i flash my meizu m3 note via adb or fastboot
Click to expand...
Click to collapse
Is your phone rooted? If yes, a root permission request should pop up on your device, if not, you won't get any adb shell with root access. To flash via adb, boot into recovery and choose apply update from adb. To flash via fastboot, type adb reboot fastboot or adb reboot bootloader.
If I helped, hit "thanks" .

RAZERZDAHACKER said:
Is your phone rooted? If yes, a root permission request should pop up on your device, if not, you won't get any adb shell with root access. To flash via adb, boot into recovery and choose apply update from adb. To flash via fastboot, type adb reboot fastboot or adb reboot bootloader.
If I helped, hit "thanks" .
Click to expand...
Click to collapse
The problem is on my phone it open but mostly without anything on screen (black). and sometimes it opens just with flyme balon turning. nothing more. adb reboot-bootloader is working but when i type fastboot update update.zip it say
"archive does not contain 'android-info.txt’
archive does not contain 'android-product.txt’
error: update packge has no android-info.txt or android-product.txt"
do i type wrong code? what should i type for flashing the meizu m3 note?

sensey666 said:
The problem is on my phone it open but mostly without anything on screen (black). and sometimes it opens just with flyme balon turning. nothing more. adb reboot-bootloader is working but when i type fastboot update update.zip it say
"archive does not contain 'android-info.txt’
archive does not contain 'android-product.txt’
error: update packge has no android-info.txt or android-product.txt"
do i type wrong code? what should i type for flashing the meizu m3 note?
Click to expand...
Click to collapse
i found the problem:
My problem is i update my Meizu M3 note L681H with M model rom. if i find orijinal rom for L681H i can sove my problem can anyone help?

sensey666 said:
The problem is on my phone it open but mostly without anything on screen (black). and sometimes it opens just with flyme balon turning. nothing more. adb reboot-bootloader is working but when i type fastboot update update.zip it say
"archive does not contain 'android-info.txt’
archive does not contain 'android-product.txt’
error: update packge has no android-info.txt or android-product.txt"
do i type wrong code? what should i type for flashing the meizu m3 note?
Click to expand...
Click to collapse
Type "fastboot flash update.zip", report result with log.
If I helped, hit "thanks" .

RAZERZDAHACKER said:
Type "fastboot flash update.zip", report result with log.
If I helped, hit "thanks" .
Click to expand...
Click to collapse
it says
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

sensey666 said:
it says
Click to expand...
Click to collapse
Oh sorry. try "fastboot update update.zip".
Hit "thanks" if I helped ya

RAZERZDAHACKER said:
Oh sorry. try "fastboot update update.zip".
Hit "thanks" if I helped ya
Click to expand...
Click to collapse
i tried this code “fastboot update update.zip” but is says:
archive does not contain 'android-info.txt’
archive does not contain 'android-product.txt’
error: update packge has no android-info.txt or android-product.txt

sensey666 said:
i tried this code “fastboot update update.zip” but is says:
archive does not contain 'android-info.txt’
archive does not contain 'android-product.txt’
error: update packge has no android-info.txt or android-product.txt
Click to expand...
Click to collapse
Unzip it and tell me what is in there, there might be a bunch of .img and .img.gz files

RAZERZDAHACKER said:
Unzip it and tell me what is in there, there might be a bunch of .img and .img.gz files
Click to expand...
Click to collapse

sensey666 said:
Click to expand...
Click to collapse
Can you upload these files somewhere? I might be able to script an updater-script for you to get you working.

RAZERZDAHACKER said:
Can you upload these files somewhere? I might be able to script an updater-script for you to get you working.
Click to expand...
Click to collapse
thank you here is the update.zip file
https://yadi.sk/d/GC5TVAfiuuBeH

sensey666 said:
thank you here is the update.zip file
https://yadi.sk/d/GC5TVAfiuuBeH
Click to expand...
Click to collapse
I'll take a look when I get home

redmi 2 prime fully bricked

Hello guys,
my redmi 2 prime now like fully dead.
i tried that with fastboot method, with command too but that stops with blank screen after mi logo
mi care said motherboard is dead .
that occured by installing twrp using flashify. i dont know what i do now ?
anyone have idea to get back my phone ?

bhaavuu said:
Hello guys,
my redmi 2 prime now like fully dead.
i tried that with fastboot method, with command too but that stops with blank screen after mi logo
mi care said motherboard is dead .
that occured by installing twrp using flashify. i dont know what i do now ?
anyone have idea to get back my phone ?
Click to expand...
Click to collapse
that's not hard bricked trust me..!!
all you can do is temporarily boot twrp by fastboot and flash boot.img

shyampandey said:
that's not hard bricked trust me..!!
all you can do is temporarily boot twrp by fastboot and flash boot.img
Click to expand...
Click to collapse
now whats the procedure to get back ?

What you tried with fastboot method.
Give a details of your trying.

bhaavuu said:
now whats the procedure to get back ?
Click to expand...
Click to collapse
do you have pc?

shyampandey said:
do you have pc?
Click to expand...
Click to collapse
i tried all things. like fastboot method with mi flash tool , tried with minimal adb too , but getting error too..
in mi flash tool , it shows flash completed but after mi logo, display will goes blank only

bhaavuu said:
i tried all things. like fastboot method with mi flash tool , tried with minimal adb too , but getting error too..
in mi flash tool , it shows flash completed but after mi logo, display will goes blank only
Click to expand...
Click to collapse
ur need for setting
miflash option / advanced
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Fastboot script: flash_all.bat *
Flash Programmer: prog_emmc_firehose_8916.mbn
Boot Image: 8916_msimage.mbn
Raw XML file: rawprogram0.xml
Patch XML file: patch0.xml
srry im bad for english

kidsjr said:
ur need for setting
miflash option / advanced
Fastboot script: flash_all.bat *
Flash Programmer: prog_emmc_firehose_8916.mbn
Boot Image: 8916_msimage.mbn
Raw XML file: rawprogram0.xml
Patch XML file: patch0.xml
srry im bad for english
Click to expand...
Click to collapse
i have new version of mi flash tool

bhaavuu said:
i have new version of mi flash tool
Click to expand...
Click to collapse
Bro just download global developer fastboot rom and follow the instruction given in the link :- http://en.miui.com/thread-78806-1-1.html just leave blank the options which aren't mentioned in the tutorial. I too got my phone back using this tutorial.

Battlecreed5 said:
Bro just download global developer fastboot rom and follow the instruction given in the link :- http://en.miui.com/thread-78806-1-1.html just leave blank the options which aren't mentioned in the tutorial. I too got my phone back using this tutorial.
Click to expand...
Click to collapse
yeah, exactly cause your phone isn't full bricked

shyampandey said:
yeah, exactly cause your phone isn't full bricked
Click to expand...
Click to collapse
finally i got my cell back with the help of twrp
https://www.youtube.com/watch?v=LsAW5zZvTNM
reset it via this and got mi recovery and i got my cell back.
thanks to all guys

bhaavuu said:
finally i got my cell back with the help of twrp
reset it via this and got mi recovery and i got my cell back.
thanks to all guys
Click to expand...
Click to collapse
there's thanks button too ?

Redmi 4 Pro Only Turn On Fastboot

Hi, i flashed my device with this ROM (xiaomi.eu/community/threads/7-9-21.41658/), at the end i reboot and never turn on again, only have access to fastboot, don't even know if is charging.
Bootloader locked again, tried to unlock again and i can't.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Someone can help?

1. Downloade and Extract Fastboot Rom
http://en.miui.com/a-234.html
2. Download and Install Mi Flashtool
http://en.miui.com/thread-593524-1-1.html
3. Download EDL from fastboot (credit to emuzychenko xda)
https://forum.xda-developers.com/attachment.php?attachmentid=3775693&d=1465328762
4. Download and install Qualcomm usb driver
http://en.miui.com/forum.php?mod=at...MjIzMjc4MDI4NnwyMzUxMDU=&ck=56381677&mobile=2
>power off your phone.
>vol down + power (fastboot mode)
>double click edl Window Coomend Script (.cmd) file
>now you are on edl mode(check device manager)
>open mi flashtool and select fastboot rom folder
>choose clean all option
>refresh
>flash

Thaw Thaw Npt said:
1. Downloade and Extract Fastboot Rom
http://en.miui.com/a-234.html
2. Download and Install Mi Flashtool
http://en.miui.com/thread-593524-1-1.html
3. Download EDL from fastboot (credit to emuzychenko xda)
https://forum.xda-developers.com/attachment.php?attachmentid=3775693&d=1465328762
4. Download and install Qualcomm usb driver
http://en.miui.com/forum.php?mod=at...MjIzMjc4MDI4NnwyMzUxMDU=&ck=56381677&mobile=2
>power off your phone.
>vol down + power (fastboot mode)
>double click edl Window Coomend Script (.cmd) file
>now you are on edl mode(check device manager)
>open mi flashtool and select fastboot rom folder
>choose clean all option
>refresh
>flash
Click to expand...
Click to collapse
Not working, same errors.

fabioziro23 said:
Not working, same errors.
Click to expand...
Click to collapse
I think the folder you extracted the rom must be in C:\ and have no spaces or symbols, e.g. C:\miuirom and not C:\miui rom or C:\miui_rom.

fabioziro23 said:
Hi, i flashed my device with this ROM (xiaomi.eu/community/threads/7-9-21.41658/), at the end i reboot and never turn on again, only have access to fastboot, don't even know if is charging.
Bootloader locked again, tried to unlock again and i can't.
Someone can help?
Click to expand...
Click to collapse
Your device is in locked bootloader, you need to unlock your bootloader first before flashing ane image

T3sla said:
I think the folder you extracted the rom must be in C:\ and have no spaces or symbols, e.g. C:\miuirom and not C:\miui rom or C:\miui_rom.
Click to expand...
Click to collapse
Hi, the images are just an exemeple..
Azrul Haifan said:
Your device is in locked bootloader, you need to unlock your bootloader first before flashing ane image
Click to expand...
Click to collapse
Yes its locked, but it was unlocked, instaled twrp and rom whitout any problem, after reboot to forst boot the bootloader was locked again, i don't know why!
I tried lots of solutions that worked to many people, but anything thats online was useless for me, even the solutions with hardware...
Anyway thanks for replying, but i already solved the problem, just needed to unlock whith miflash unlock and it booted with the new rom i had instaled before locked again.

fabioziro23 said:
Hi, i flashed my device with this ROM (xiaomi.eu/community/threads/7-9-21.41658/), at the end i reboot and never turn on again, only have access to fastboot, don't even know if is charging.
Bootloader locked again, tried to unlock again and i can't.
Someone can help?
Click to expand...
Click to collapse
watch this but i am not responsible for any damage.