Database Users

HELP , Bricked my Phone

I was trying to update to Nougat . Flashed the update.zip file and another update_full_cn file. I did the mistake of flashing my regional cust file without booting first..
This is what I get when I try to flash system.img or cust from the stock B380 ROM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I can flash twrp but can't boot into it. One stupidious thing I did was I rebooted my phone when the dload update showed up but it was stuck at 5%.
EDIT:I fastbooted the boot,system,cust and recovery from the B523 firmware but now it's stuck at Huawei logo.

Go to erecovery and factory reset.
Volume up + power.

Tried it. There's no factory reset option in erecovery.

Astra1 said:
Tried it. There's no factory reset option.
Click to expand...
Click to collapse
How there is no factory reset in stock recovery?

gm007 said:
How there is no factory reset in stock recovery?
Click to expand...
Click to collapse
I don't know. It Just has Download Recovery, reboot and shutdown option.

Astra1 said:
I don't know. It Just has Download Recovery, reboot and shutdown option.
Click to expand...
Click to collapse
Flash stock recovery with fastboot

gm007 said:
Flash stock recovery with fastboot
Click to expand...
Click to collapse
Already did. Same thing.

Astra1 said:
Already did. Same thing.
Click to expand...
Click to collapse
Which version are you using? Latest for C185 is B200 try with this one.

I tried with nougat version and the B386 recovery.

Astra1 said:
I tried with nougat version and the B386 recovery.
Click to expand...
Click to collapse
I think emui 5 have different recovery than emui 4 that's why u have to try B200

gm007 said:
I think emui 5 have different recovery than emui 4 that's why u have to try B200
Click to expand...
Click to collapse
If you have the B200 ROM on your computer can u extract and post the recovery image here.

Astra1 said:
If you have the B200 ROM on your computer can u extract and post the recovery image here.
Click to expand...
Click to collapse
I will in 15 minutes.
---------- Post added at 09:54 AM ---------- Previous post was at 09:38 AM ----------
here you go C185B200 recovery image https://www.mediafire.com/?j62d2vdjhoin1cv

erecovery is recovery2.img file.

grofock said:
erecovery is recovery2.img file.
Click to expand...
Click to collapse
Why do we have 2 recovery in each firmware?
And how to flash the second recovery with fastboot?

To enter TWRP unplug your phone, press Vol UP and then Power, wait til it vibrated 2x , then when you see the huawei logo, release both and wait

Swissguy36 said:
To enter TWRP unplug your phone, press Vol UP and then Power, wait til it vibrated 2x , then when you see the huawei logo, release both and wait
Click to expand...
Click to collapse
First of all, thanks for your reply.
I tried what you told and the stock recovery comes up with the software install failed thing. No matter , How many times I flash twrp, the stock recovery comes up. I tried placing the B380 UPDATE.APP in the dload folder of the sdcard. Tried the same thing with nougat UPDATE.APP. Both times it says software install failed.
Did factory reset again and ahter the message your device is booting, the screen goes blank but stays on.
@gm007, I tried the stock recovery you posted but same result. How come I don't have factory reset? Does it has something to do with being unlocked.
EDITkay, by luck or something I got the WIPE data and cache option. I did both of them, But now it's stuck at your device is booting now.

If you were in EMUI 5.0, welcome to the club, until today I could not revert to 4.1 or 4.0, all I could do was make 5.0 usable. If so, you will have to use the boot, recovery, recovery2 and emui 5.0 system on the fastboot and then use the dload with the rom that "attached" your phone. I'm on AL10C17B523 and I can not reverse it at all, I've already accepted my burden.

Marcelo AF said:
If you were in EMUI 5.0, welcome to the club, until today I could not revert to 4.1 or 4.0, all I could do was make 5.0 usable. If so, you will have to use the boot, recovery, recovery2 and emui 5.0 system on the fastboot and then use the dload with the rom that "attached" your phone. I'm on AL10C17B523 and I can not reverse it at all, I've already accepted my burden.
Click to expand...
Click to collapse
If TWRP for EMUI 5 arrives then we can do something.
So is there something I can do? I copied the UPDATE.APP file of B552 firmware into the dload folder of the sd card and Did the dload update thing. It says incompatible software - installation failed. I think I can fix this, Just need some instructions.

I successfully downgraded to Kangvip b368. The procedure was as follows
First of all make sure you have nougat stock recovery .
Then download stock B320 , extract the update.app and put in the dload folder on the sd card.
Next do the dload update by pressing the 3 buttons.
Hopefully it will complete to 100%
After that do a factory reset. U may find that your bootloader is locked again. So unlock it, flash twrp and u r good to go. Flash Kangvip b368 through twrp and that's it.
Kindly Mark this thread as solved.

Wah astra1

Help with update to NXT-L29C432B560

Hey guys my nxt-l29 was running on
NXT-L29C900B320
after the new B560 update i debrand my phone to C432 and flash the system but didn't work i tried every thing i found and it didn't work،
Now my phone is on NXT-L29BC432B320
But bootloader and kernel on NXT-L29BC900B320
What should i do to be able to flash C432B560?
Thanks
Sent from my HUAWEI NXT-L29 using XDA-Developers Legacy app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

alobiedy said:
Hey guys my nxt-l29 was running on
NXT-L29C900B320
after the new B560 update i debrand my phone to C432 and flash the system but didn't work i tried every thing i found and it didn't work،
Now my phone is on NXT-L29BC432B320
But bootloader and kernel on NXT-L29BC900B320
What should i do to be able to flash C432B560?
Thanks
Click to expand...
Click to collapse
How to install NXT-L09C432B560 (Official) Firmware. (Guide with download links)
NXT-L09C432B560
Changelog
This update optimizes system performance and stability, and fixes an issue where some UI elements were displayed incorrectly.
Optimizations
Decreases power consumption to prolong usage time. Improves system performance and stability for smoother operations. Optimizes the display in the status bar and notification panel, which now displays notifications more clearly. Integrates Google security patches for improved system security.
Fixes
Fixes an issue where no control buttons were displayed on the lock screen for third-party music apps. Fixes an issue where app icons were not being displayed for messages in the status bar. Fixes an issue where the text wasn't displayed clearly in third-party apps with a white background. Fixes an issue where call durations were not displayed in the call log. Fixes an issue where some UI elements were displayed incorrectly.
Update notes
1. We recommend that you back up any important data before updating.
2. The system will restart after the update. This will take about 5 minutes.
3. The Barclays app quits mid-operation because it is incompatible with Android 7.0. Please download the latest compatible version when it is available.
4. If you experience any issues during the update, please call the Huawei customer service hotline or visit an authorized Huawei service center for assistance.
Step by Step Guide
1-
Download these 3 files (update.zip, update_full_hw_eu.zip, supersu_v2.79_sr2.zip)
1.1- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73563/f1/full/update.zip
1.2- http://update.hicloud.com:8180/TDS/...4/v73563/f1/full//hw/eu/update_full_hw_eu.zip
1.3- http://www.sillanwali.com/downloads/supersu_v2.79_sr2.zip
2-
Copy these 3 files (update.zip, update_full_hw_eu.zip, supersu_v2.79_sr2.zip) into SD Card
3-
Download TWRP Recovery 3.0.3
http://sillanwali.com/downloads/twrp-3.0.3.img
4-
adb devices
adb reboot bootloader
fastboot oem device-info
fastboot oem unlock ****************
To obtain bootloader unlock code, go to https://emui.huawei.com/en/plugin/unlock/index
Huawei ID is the account you use to access all Huawei services.
Log in to your Huawei ID. Phone/Email. Password ********
fastboot flash recovery (PATH-TO)\twrp-3.0.3.img
5-
5.1- Reboot your phone to TWRP then choose Wipe > format > type Yes
5.2- Back again, then wipe (data, dalvik, cache, system)
5.3- Don't reboot
6-
Install
6.1- supersu_v2.79_sr2.zip (Don't reboot after install)
6.2- update_full_hw_eu.zip (Don't reboot after install)
ignore unmounting \ cust, system, userdata error
6.3- update.zip (Reboot when success)
7-
7.1- Factory Reset after success 100%. After that you will get NXT-L09C432B560 (Official) Firmware.
7.2- Run bootloader
7.2- fastboot oem relock ****************
7.3- Factory Reset
8-
Did I help you? A ''thanks'' would be highly appreciated

sillanwali said:
How to install NXT-L09C432B560 (Official) Firmware. (Guide with download links)
NXT-L09C432B560
Changelog
This update optimizes system performance and stability, and fixes an issue where some UI elements were displayed incorrectly.
Optimizations
Decreases power consumption to prolong usage time. Improves system performance and stability for smoother operations. Optimizes the display in the status bar and notification panel, which now displays notifications more clearly. Integrates Google security patches for improved system security.
Fixes
Fixes an issue where no control buttons were displayed on the lock screen for third-party music apps. Fixes an issue where app icons were not being displayed for messages in the status bar. Fixes an issue where the text wasn't displayed clearly in third-party apps with a white background. Fixes an issue where call durations were not displayed in the call log. Fixes an issue where some UI elements were displayed incorrectly.
Update notes
1. We recommend that you back up any important data before updating.
2. The system will restart after the update. This will take about 5 minutes.
3. The Barclays app quits mid-operation because it is incompatible with Android 7.0. Please download the latest compatible version when it is available.
4. If you experience any issues during the update, please call the Huawei customer service hotline or visit an authorized Huawei service center for assistance.
Step by Step Guide
1-
Download these 3 files (update.zip, update_full_hw_eu.zip, supersu_v2.79_sr2.zip)
1.1- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73563/f1/full/update.zip
1.2- http://update.hicloud.com:8180/TDS/...4/v73563/f1/full//hw/eu/update_full_hw_eu.zip
1.3- http://www.sillanwali.com/downloads/supersu_v2.79_sr2.zip
2-
Copy these 3 files (update.zip, update_full_hw_eu.zip, supersu_v2.79_sr2.zip) into SD Card
3-
Download TWRP Recovery 3.0.3
http://sillanwali.com/downloads/twrp-3.0.3.img
4-
adb devices
adb reboot bootloader
fastboot oem device-info
fastboot oem unlock ****************
To obtain bootloader unlock code, go to https://emui.huawei.com/en/plugin/unlock/index
Huawei ID is the account you use to access all Huawei services.
Log in to your Huawei ID. Phone/Email. Password ********
fastboot flash recovery (PATH-TO)\twrp-3.0.3.img
5-
5.1- Reboot your phone to TWRP then choose Wipe > format > type Yes
5.2- Back again, then wipe (data, dalvik, cache, system)
5.3- Don't reboot
6-
Install
6.1- supersu_v2.79_sr2.zip (Don't reboot after install)
6.2- update_full_hw_eu.zip (Don't reboot after install)
ignore unmounting \ cust, system, userdata error
6.3- update.zip (Reboot when success)
7-
7.1- Factory Reset after success 100%. After that you will get NXT-L09C432B560 (Official) Firmware.
7.2- Run bootloader
7.2- fastboot oem relock ****************
7.3- Factory Reset
8-
Did I help you? A ''thanks'' would be highly appreciated
Click to expand...
Click to collapse
Thanx alot sillanwali, i did all that steps again and didn't work too
Sent from my HUAWEI NXT-L29 using XDA-Developers Legacy app

B371 update for vns-l21c432?

This update for p9 lite B371?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you cant see picture here is link
https://yadi.sk/i/sGrM8Zhz3GkMjJ

Yes

This is awesome!
Have you installed it? And if yes, is it working as it should work? Camera...?

Tried to install it using 3 buttons method, but it failed at 5%.
I'm on B161.

I just updated my vnsl21c432 to b370 from b170.
1. copy update.zip and updata_data_full to sd card
2. boot to twrp
3. flash both zips WITHOUT booting inbetween
3a (there will probably be an error about mounting data, there was in my case)
3b1 DONT BOOT and go to twrp > wipe > data > change filesystem > choose F2FS (was not an option in my case, so i just chose FAT)
3b2 change filesystem of /data AGAIN, this time back to EXT4
3c flash update_data_full AGAIN
4. shut down the device. DON'T BOOT
5. extract recovery.img from UPDATE.APP using Huawei Update Extractor
6. phone turned off, hold volume down and plug in the usb cable to boot into fastboot
7. flash stgock recovery you extracted at step 5 with this command fastboot flash recovery recovery.img
8. NOW BOOT into nougat
9. factory reset
Prior to factory resetting I noticed no apps were msising, BT, WIFI, camera all working.
Now I'm going to try and root it.

zgomot said:
I just updated my vnsl21c432 to b370 from b170.
1. copy update.zip and updata_data_full to sd card
2. boot to twrp
3. flash both zips WITHOUT booting inbetween
3a (there will probably be an error about mounting data, there was in my case)
3b1 DONT BOOT and go to twrp > wipe > data > change filesystem > choose F2FS (was not an option in my case, so i just chose FAT)
3b2 change filesystem of /data AGAIN, this time back to EXT4
3c flash update_data_full AGAIN
4. shut down the device. DON'T BOOT
5. extract recovery.img from UPDATE.APP using Huawei Update Extractor
6. phone turned off, hold volume down and plug in the usb cable to boot into fastboot
7. flash stgock recovery you extracted at step 5 with this command fastboot flash recovery recovery.img
8. NOW BOOT into nougat
9. factory reset
Prior to factory resetting I noticed no apps were msising, BT, WIFI, camera all working.
Now I'm going to try and root it.
Click to expand...
Click to collapse
Is it better to install it in TWRP or using the system updater? Because I sent the update to the system updater and its downloading now...

E bas sporo ide upadte. Ja ga skidam kroz sistem. Tek je na 2%
very slow-going update. I'm taking him through the system. It was only at 2%

crowbgd said:
E bas sporo ide upadte. Ja ga skidam kroz sistem. Tek je na 2%
very slow-going update. I'm taking him through the system. It was only at 2%
Click to expand...
Click to collapse
Pokusaj da vratis default proxy (none), pusti nesto na youtube-u i bice brze.
Try to change the proxy settings to none after the download starts and play a videos from youtube and it'll download faster.

Mislis na telefonu da pustim Youtube?
You mean on the phone to let Youtube?

crowbgd said:
Mislis na telefonu da pustim Youtube?
You mean on the phone to let Youtube?
Click to expand...
Click to collapse
Yes.

Nope,now is stoped and popup notification Network is unstable. Pls try later .Im paused Update,back to Proxi non,and now go with normal speed.

crowbgd said:
Nope,now is stoped and popup notification Network is unstable. Pls try later .
Click to expand...
Click to collapse
Go into the system updater and press resume. It works for me. And it worked before.)

You have PM

Magisk installed. Root access present. Viper4Android installed.
So far, so good.

can't update via Dload method ;/

Johnny TDN said:
can't update via Dload method ;/
Click to expand...
Click to collapse
Try the TWRP method. I posted a short guide a few posts back.

zgomot said:
Try the TWRP method. I posted a short guide a few posts back.
Click to expand...
Click to collapse
thanks.
After instalation, app twin and user settings are gone.
In the beta version, they were there.

Heh download upadte,and verification is not pass?

Did anyone successull update to B371 using Firware Finder? Any confirmation?

Successfully installed it using the system updater. The update has finished downloading, the phone rebooted into twrp and installed the update.

Xiaomi Redmi 2 2014811 bricked after updating SuperSu binary in recovery?

I'm not rly good with electronics etc, my phone came with root access permissions via Security MIUI app so I installed SuperSu to manage it easier (MIUI app reqiured to manually check each app to allow access), no custom ROM or anything installed, the way it happened was
1. updated supersu from google play
2. entered supersu app,it asked me to update su binary
3. I clicked yes through recovery
4. it rebooted and got bootlooped.
It's stuck at the "mi.com" screen when turning on, can't go into recovery, fastboot mode only shows an image of Miui mascot without any fastboot options. I've followed some tutorials online and got the thing below from minimal adb.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

sufoc said:
I'm not rly good with electronics etc, my phone came with root access permissions via Security MIUI app so I installed SuperSu to manage it easier (MIUI app reqiured to manually check each app to allow access), no custom ROM or anything installed, the way it happened was
1. updated supersu from google play
2. entered supersu app,it asked me to update su binary
3. I clicked yes through recovery
4. it rebooted and got bootlooped.
It's stuck at the "mi.com" screen when turning on, can't go into recovery, fastboot mode only shows an image of Miui mascot without any fastboot options. I've followed some tutorials online and got the thing below from minimal adb.
Click to expand...
Click to collapse
Fastboot will show that android icon only.
No fastboot options will be available there.
Now you need to perform some steps to recover your device..
Note - Your data will be wiped. Also, remove memory card (if any).
Now let's start the process -:
Download MIUI Fastboot ROM file.
Here's the link..
1GB RAM model - http://update.miui.com/updates/v1/fullromdownload.php?d=wt88047_global&b=F&r=global&n=
2GB RAM model - http://update.miui.com/updates/v1/fullromdownload.php?d=wt88047_pro_global&b=F&r=global&n=
Also extract this file and put in C Drive.
Now turn your PC on..
And install latest Mi flash tool. http://api.bbs.miui.com/url/MiFlash
Turn your device off. By pulling battery. (Assuming that your device is in bootloop).
Go to fastboot mode (power + volume down)
Now turn your PC on.
Open Mi flash tool.
Connect your device.
Click on refresh button in flash tool.
Now, it will show some random numbers. (This is your device).
Now, select your ROM fastboot file which you downloaded and extracted.
After that, choose 'flash all' and click Flash..
It will take some time.
After that your device will be rebooted.
Voila! Your device is back to life!

edit: solved

edit: solved

sethidheeraj06 said:
Fastboot will show that android icon only.
No fastboot options will be available there.
Now you need to perform some steps to recover your device..
Note - Your data will be wiped. Also, remove memory card (if any).
Now let's start the process -:
Download MIUI Fastboot ROM file.
Here's the link..
1GB RAM model - http://update.miui.com/updates/v1/fullromdownload.php?d=wt88047_global&b=F&r=global&n=
2GB RAM model - http://update.miui.com/updates/v1/fullromdownload.php?d=wt88047_pro_global&b=F&r=global&n=
Also extract this file and put in C Drive.
Now turn your PC on..
And install latest Mi flash tool. http://api.bbs.miui.com/url/MiFlash
Turn your device off. By pulling battery. (Assuming that your device is in bootloop).
Go to fastboot mode (power + volume down)
Now turn your PC on.
Open Mi flash tool.
Connect your device.
Click on refresh button in flash tool.
Now, it will show some random numbers. (This is your device).
Now, select your ROM fastboot file which you downloaded and extracted.
After that, choose 'flash all' and click Flash..
It will take some time.
After that your device will be rebooted.
Voila! Your device is back to life!
Click to expand...
Click to collapse
The fastboot rom is incorrect for my model (missmatching image and device error)

sufoc said:
The fastboot rom is incorrect for my model (missmatching image and device error)
Click to expand...
Click to collapse
Which device do you have..?
Kindly tell the model no. Such as 2014818.

sethidheeraj06 said:
Which device do you have..?
Kindly tell the model no. Such as 2014818.
Click to expand...
Click to collapse
It's the same as in the title, 2014811 TD-LTE

Installing Android 7 on P9 Lite VNS-DL00

In Huawei p9 lite VNS-DL00 I wanted to change the location to the European one to upload Android 7. I unlocked the bootloader using the PotatoNV method and uploaded twrp. Then I installed oeminfo L31C432 DS (link). Now I am trying to upload the VNSL31C432B416 software link) I tried the dload method, but at 5% the software install failed, so I tried like this of the guide (link). After the installation of this tutorial, it freezes at the boot screen. How to put it on its feet and upload android 7?

Dżejkob98 said:
In Huawei p9 lite VNS-DL00 I wanted to change the location to the European one to upload Android 7. I unlocked the bootloader using the PotatoNV method and uploaded twrp. Then I installed oeminfo L31C432 DS (link). Now I am trying to upload the VNSL31C432B416 software link) I tried the dload method, but at 5% the software install failed, so I tried like this of the guide (link). After the installation of this tutorial, it freezes at the boot screen. How to put it on its feet and upload android 7?
Click to expand...
Click to collapse
Here you go
https://forum.xda-developers.com/t/updating-huawei-p9-lite-h3g-it-to-nougat.4374095/post-86084295

-Alf- said:
Here you go
https://forum.xda-developers.com/t/updating-huawei-p9-lite-h3g-it-to-nougat.4374095/post-86084295
Click to expand...
Click to collapse
during flash update с432b370.zip I get this error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Dżejkob98 said:
during flash update с432b370.zip I get this error:
View attachment 5571101
Click to expand...
Click to collapse
Maybe because you don't read carefully.
First you need to install the update c432b370.zip, then you can install eu_L31.zip.
Also you can try this Installation method 1 (use downloaded files).

-Alf- said:
Maybe because you don't read carefully.
First you need to install the update c432b370.zip, then you can install eu_L31.zip.
Also you can try this Installation method 1 (use downloaded files).
Click to expand...
Click to collapse
first installs "update c432b370.zip" and I get this error as above.
using Installation method 1 at 5% I get Software install failed

Dżejkob98 said:
first installs "update c432b370.zip" and I get this error as above.
using Installation method 1 at 5% I get Software install failed
Click to expand...
Click to collapse
1. I'm not the owner of that account on cloud.mail.ru, so if the file is really corrupt, I can't help you. Try searching for another FW vns-l31c432b370.
2. Are you using TWRP 3.0.2.0 from a link?
3. In fastboot mode run commands :
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
Some might fail, so don't worry about it.

.

-Alf- said:
1. Nie jestem tego konta na cloud.mail, więc jeśli plik jest naprawdę. nie mogę ci pomóc. FW vns-c432b370
2. Czy z programu TWRP 3.0.2.0 linku?
3. Wprowadzę szybkie uruchomienie polecenia:
Fastboot oem pobierz numer kompilacji
Fastboot oem pobierz model produktu
fastboot getvar kraj dostawcy
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
opublikuj wyniki.
Niektóre mogą zawieść, więc nie martw się tym.
Click to expand...
Click to collapse
i installed it twrp ( link )
in the photo the results fastboot

Okay, download B160 full link (it may lock your bootloader!), use dload method. And try again install B370 via TWRP or use dload method. It should work.
And English please!

-Alf- said:
Okay, download B160 full link (it may lock your bootloader!), use dload method. And try again install B370 via TWRP or use dload method. It should work.
And English please!
Click to expand...
Click to collapse
I successfully installed B160, then B370 and update_data_full_VNS-L31_hw_eu.zip
Now I wanted to install B416, but still with the dload method at 5% it shows Software install failed.
How to install B416?

Dżejkob98 said:
but still with the dload method at 5% it shows Software install failed.
Click to expand...
Click to collapse
Did you perform a factory reset after installing the B370? It is necessary. And check your current build number in Settings > About phone.
Dżejkob98 said:
How to install B416?
Click to expand...
Click to collapse
Unzip SDupdate_Package.tar.gz .
Copy the entire dload folder (without unpacking it!!!) to the root directory of the Micro SD card. Power off, and use three buttons combo.

-Alf- said:
Did you perform a factory reset after installing the B370? It is necessary. And check your current build number in Settings > About phone.
Unzip SDupdate_Package.tar.gz .
Copy the entire dload folder (without unpacking it!!!) to the root directory of the Micro SD card. Power off, and use three buttons combo.
Click to expand...
Click to collapse
current build number is VNS-L31C432B370
I did a factory reset
When installing B416 with the dload method at 5%, Software install failed.

Dżejkob98 said:
Software install failed
Click to expand...
Click to collapse
Nothing else? "Incompatibility with current version" "Update package does not exist" etc.?

-Alf- said:
Nothing else? "Incompatibility with current version" "Update package does not exist" etc.?
Click to expand...
Click to collapse

Dżejkob98 said:
View attachment 5571819
Click to expand...
Click to collapse
incompatibility? Strange, it worked for others...
Do you have access to the Project Menu? (* # * # 2846579# * # *) If not, you don't have eu.zip completely installed.

-Alf- said:
incompatibility? Strange, it worked for others...
Do you have access to the Project Menu? (* # * # 2846579# * # *) If not, you don't have eu.zip completely installed.
Click to expand...
Click to collapse
I have access to the Project Menu

Dżejkob98 said:
I have access to the Project Menu
Click to expand...
Click to collapse
Then I don't know what the problem is, sorry...

-Alf- said:
Then I don't know what the problem is, sorry...
Click to expand...
Click to collapse
Try to update via HiSuite , OTA or eRecovery.

-Alf- said:
Try to update via HiSuite , OTA or eRecovery.
Click to expand...
Click to collapse
neither of these methods works