Hi
my MG6+ got a black screen out of the blue. Pressing the power button did not help. To connect it to a Windows 10 PC does not help - it tells me that the usb connection does not work. What is really strange that the device is somehow alive. It is logged in my wlan. I can ping it. Is there a way to get the data from the phone or do something to get it work.
I tried to use a usb-c to hdmi cable to connect the phone to my tv but nothing has been displayed on the screen.
Thanks for help
What do you mean by out of the blue?
I meant that the phone stopped working (black screen) without any pre-warnings.
What is strange that the phone is logged into my LAN and I can ping it. A network scan also tells me that this is a device from Motorola Mobility LLC, a Lenovo Company.
Related
i've been searching around many forums for the past week and cant seem to find the answer. My mda connects to active sync for like 3 days and suddenly stops working. My computer recognizes the mda and you could hear the sound but active sync doesnt. The freen wheel keeps spinning and says connecting . Everytime i do a hard reset it connects for a quick minute and then it stops. I tried installing a fresh copy of windows and still it wouldnt work. Ive installed and reinstalled active sync about 10 times and still nothing.
update i have noticed that its starts doing the spinning wheel thing when a big G appears at the top of the screen
the g means its on gprs, usually so shouldnt be whats causing it.
do you have any firewalls installed? when you plug in your vario its connection to the computer emulates a network connection so your vario can see the internet when plugged into the pc for example.
its possible that your firewall is blocking it, so try disabling and see if it helps.
as for why it might work then not work, im not sure, maybe something about what active sync does might trigger some kind of attack detection.
hope this helps
hello all
i have a problem with my touch hd. it is an unbranded not locked device from sunrise swiztzerland.
i flashed the rom to this one here:
RUU_BlackStone_HTC_WWE_1.14.405.0_Radio_52.49a.25.26_1.09.25.14_Ship.exe
now in my communications manager the wifi is greyed out.
i can still get wifi running over the settings (bottom right). any idea what is wrong ?
thanks
Wifi option is gray, when a phone is connected to a pc with usb cable, try to disconnect it.
thx. i got the prob. somehow activesync is not stopping properly when disconnected, so the devce seems to think its still connected...
My wife's Touch (on Win 6.1) screen is not working; it seems that both digitizer and screen have gone bad.
We have received replacement phone but I need to download data from her broken phone (such as pics/contacts/footprints) before we swap replacement phone with broken phone and ship broken phone back.
Phone is not visible on ActiveSync (I think Phone as Disk Drive option was checked previously), so I can not connect the phone to PC.
Any other suggestions to download data from phone's memory to PC?
My Mobile
www.mymobiler.com
Shows on your PC a window that is what's on your phone.
and you can control the phone from the pc
Thanks guys, that's exactly what I was looking for as far as controlling Touch from PC is concerned.
NFSFAN's ROMs have three connection USB options:
ActiveSync
Disk Drive
Internet Sharing
But yet, whenever I connect Touch to PC, by default it goes to Disk Drive mode without going through ActiveSync setting.
Or, is there any way to force ActiveSync setting remotely?
Hi.
I'm a Newbie here. Please help me seniors. I hava a T-Mobile MDA Vario II. Recently its display crashed. And all I get is a White frozen QVGA Screen. . Now the hardware is not my problem. The device worked well even the Touchscreen worked well. I started using the mobile as an INTERNET MODEM with PDANet v2.00. And I will operate the device with MyMobiler v1.25. When I connect my mobile, My Vista will show it as HTC USB SYNC connected. everythng went fine. But recently, Due to a fatal power cut the System and mobile Both Restarted automatically. Whats happening now is,
1. Windows shows the device as Pocket PC instead of HTC USB SYNC.
2. MyMobiler shows Nothing but a Balloon saying "Running on your mobile"
3. PDANet says " Connection failed. Error 8036".
And when I reconnect, the mobile was recognised as Unknown device.
I tried reinstalling windows too. But no use. It still shows up Pocket PC and not HTC USB SYNC. Also, when I try to make a call to the SIM Card inserted, it says the number is switched off. This means that the SIM is disabled. Please help me what Can I do to get my device back. Thanx in advance. pls mail me.
Hi all,
I am having trouble connecting my phone to the PC through USB. When I plug it in the PC doesn't do anything, no notifications or pop ups that a device has been connected. The phone itself just goes into charging mode, again with no sign of a USB connection. When I drag down the menu bar it just says charging with no options such as USB connection mode as you would expect. I have tried two different cables and a different PC and it's the same, nothing on the PC to indicate a connection and the phone just entering charging mode. A different Samsung phone (Galaxy S5) connects immediately with the same cable on the same PC, giving the notification and connection option on the phone. I have tried a hard reset/factory reset of the phone but have had no luck. The phone still fast charges as normal using the standard factory charger, so the port on the phone doesn't seem to have any issues that way, but I just can't get the USB to connect.
I bought the phone second hand just over a year ago, when I got it Knox had been triggered and it didn't work with my GearVR due to a software problem (it seems the previous owner was likely a tinkerer who installed a custom ROM). At this time I plugged the phone in and manually re-installed the Stock Samsung Software using Odin to reset the phone to default. Since this time I have used the phone with no issues, everything has run fine. I only realised when I used a friends S7 Edge that my software was out of date, it seems OTA updates don't work on this phone and it still has the software I installed. This led me to try plugging it in again and updating manually and I have only now found this issue with the USB. Do you think this is a hardware problem or possibly software? Any suggestions would be much appreciated.
Thanks,