I've been using my xda2 fine for the last few weeks connected to my winxp pc. Just now my pc rebooted itself for no reason. when I checked the Event log it showed this:
The driver detected a hardware failure on device \Device\WCEUSBSH001 and will disable this device.
Now i can't seem to sync my xda. i have tried a soft reset and then put back on the docking station but nothing happens
any ideas anyone???
ok sorted the problem - The reason it wouldn't connect again was because windows was blocking the program from running ( a crap feature of the firewall in service pack 2!) i had to allow the program again.
still don't know why it rebooted in the first place though!
Hello
sometimes when i connect my xda to my pc through the USB cable, my XDA does start charging however the activesyn application shows "Not connected".
it is big pain since i then have to retart my pc and close all the applications that i have gotten going.
can you guys tell me to get the activesync to detect my xda always?
actually this time around i resarted my pc, and activesync is still not detecting my xda i have got activesync 4.0
hey, solved part of thep roblem
it was zone alarm, i installed activesync 4.2 and then found out that the pocket pc was detected but it could not access it.
can you guys tell me
1. how to get activeasynch to run with zonealarm still on (what filetr settings should i have on zonealarm)
2. activesync sometimes does not work after a session, (some sort of settngs need to be rest), and then i have to restart my pc and then activesync works again
Not able to connect with Activesync
I'm sorry to jump in, in the middle here but I do need help.
I am running XP prof and have an O2 xda exec (Called the HTC Universal I believe). I am trying to install Activesync 4.2 and indeed have also tried the 3.8 version. No luck at all. When getting to the stage where the Activesync installation program asks you to connect the XDA there is a reaction when plugging this in on the USB cable however it then says it can't detect it. I have switched off my firewall, still no luck. I desperately need Activesync to synchronise with my desktop and install software. Is there someone who could help please. Email [email protected] if anybody would be so kind. Happy Christmas everybody.
Activesync + ZoneAlarm
Microsoft has a write up on the symptoms/fixes for connectivity issues with ActiveSync. Check out
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
Regards,
hi, i have a qtek s200 and it no longer connects to the internet thru my pc anymore, havent found out why, and when i plug in my phone thru usb it gives me this error "Synchronization cannot be started because you are not able to log onto the network and access information. Restart your desktop computer and synchronize again. If the problem persists, contact your network administrator. " So i restarted still nothing, deleted phone and reinstalled it again through sync center and mobile device center still nothing has worked, it worked perfectly an hour ago downloading weather updates for spb weather and now nothing only think that i changed on my pc was limewire/java. anyone have a clue whats going on?
thanks alot
swiftk1 said:
hi, i have a qtek s200 and it no longer connects to the internet thru my pc anymore, havent found out why, and when i plug in my phone thru usb it gives me this error "Synchronization cannot be started because you are not able to log onto the network and access information. Restart your desktop computer and synchronize again. If the problem persists, contact your network administrator. " So i restarted still nothing, deleted phone and reinstalled it again through sync center and mobile device center still nothing has worked, it worked perfectly an hour ago downloading weather updates for spb weather and now nothing only think that i changed on my pc was limewire/java. anyone have a clue whats going on?
thanks alot
Click to expand...
Click to collapse
Windows Vista?
Its caused by your notes..try unchecking your notes in activesync...or create a new profile in outlook
Hi all, I have a frustrating problem with my Cingular 8525. I just formatted the comp and installed Vista Ultimate on it fresh. I downloaded WMDC but I can't get it to recognize my phone for the life of me. It keeps saying "connecting" forever and never does. I have done all sorts of installs, re-installs, hard resets, but I can't get it to detect at all! Can anyone help? Thanks in advance.
NYKUNLV said:
Hi all, I have a frustrating problem with my Cingular 8525. I just formatted the comp and installed Vista Ultimate on it fresh. I downloaded WMDC but I can't get it to recognize my phone for the life of me. It keeps saying "connecting" forever and never does. I have done all sorts of installs, re-installs, hard resets, but I can't get it to detect at all! Can anyone help? Thanks in advance.
Click to expand...
Click to collapse
first try to install the driver of your device.. go to device manager and look for unknown device at OTHERS..
good night and good luck
The driver is installed... it displays HTC USB Sync. I am getting frustrated . Stupid Vista.
USE the search function dude
Hermes vista config guide
Also make sure you dont have any firewalls active. I have had issues syncing my phone with my computer when using AVG's firewall. I simply disabled the firewall and it fixed my problems.
mrvanx said:
USE the search function dude
Hermes vista config guide
Click to expand...
Click to collapse
I already tried that guide... still not working. Ill try disabling the firewall
go to settings->connections->usb to pc and then check Enable Advanced network functionality.
If that doesn't work remove/uninstall htc sync device, unplug device and plug in device to reinstall the htc sync device after you have set the usb to pc connection settings.
Also try using a different USB cable and plugging it into a different port, you never know, it could just be something defective.
But I'm putting my money on the firewall
I had a problem connecting my 8525 to my Vista machine. It would say connecting but it would never finish 'connecting'. It took a while but finally I figured out what was causing it. It was the 'recording' .wav files in the notes directory that were causing the issue. If you have any .wav files in your notes directory I'd suggest moving them to say your SD card or deleting them. That fixed the 'connecting' problem for me and since I did that it's been syncronizing fine ever since.
I tried everything listed in here at once.... something worked I should have done each step by step to pinpoint what exactly... but its working now. Thanks everyone!
NYKUNLV said:
I tried everything listed in here at once.... something worked I should have done each step by step to pinpoint what exactly... but its working now. Thanks everyone!
Click to expand...
Click to collapse
Same for me. I had a load of problems getting the Mobile Device Center working with my HTC TyTN. First I was unable to even install the driver when I first connected my device. The "add new hardware" wizard always tried to connect to Windows Update and install an updated driver which then failed. The solution was to let it fail and manually install an older driver from the list using the icon in Device Manager. After that I could start Windows Update and download the latest update.
Then I had the same problems as you describe. When I started WMDC it just hung while displaying "Connecting". Looking in the task manager I noticed that the wmdc.exe process was consuming more and more memory, up until something like 250 MB, after which WMDC just showed "Error". Finally I got it to work. It is hard to pinpoint exactly what I did to fix it. I know that the "advanced network features" under USB in connection settings on the TyTN need to be ticked and the device showing as a Windows Mobile Device instead of HTC USB Sync.
Initially I did a hard reset of the TyTN. Further, I manually unistalled and reinstalled the driver in Device Manager a couple of times. I tried to reboot both the computer and the TyTN several times. Also, I did restart the "Windows Mobile-based device connectivity" service after plugging in the cable. Finally it just recognized my device and I could setup the partnership. Now I can sync over bluetooth too and skip the cable.
HTC phone support was not very helpful with this problem. "We will call you back". Yeah right.
Mobile cofiguration:
Dopod 838 Pro
LVSW 4/17/07 WM6
Hard SPL
PC configuration:
Windows Vista Business Edition
I encountered the same problem. Currently able to sync back by hard resetting my device. The USB to PC connection on settings does not appear to affect the sync problem.
I suspect that the problem arise when I originally sync with an XP machine.
What worked for me was to enable the advanced usb setting on the phone as mentioned...then while the phone is still plugged in, I removed everything associated with the phone from device manager on the pc. Once that was done, I unplugged the cable, waited a few seconds, and plugged it back in (with the advanced usb settings still checked.) Worked like a charm with WMDC.
I had problems with all sorts of "connectivity" in Vista, including connecting up my Trinity, and setting up my xbox 360 as a media extender.
As soon as I uninstalled MS One Care it all started working.
I am trying to make my Vista box to connect 3G network through my mobile. But I have tried many ways still it show me the error as attached.
I have no problem to have active sync working and have followed the instruction on Samsung help page to install their PC Suite. Yet, things is not working... Same problem occurs.
Any hints from any one on how to work this out?
looking for hints...
Anybody have any idea which I had did wrong?
There is an option of it, and for sure it is able to work as Modem for my notebook. Just wondering why can't my notebook recognize the phone when I start the Internet Sharing and connect my phone to GMS Data network (3G/EDGE/GPRS).
Just to follow up with some extra screen capture...
There is a screen popup as following:
Have just tried this on Bluetooth PAN, IT WORKS FINE!!!! (Never think to use this since the WM is really eating too many battery power~!)
But how to get the USB Connection mode work as well?