Related
Had my XDA Exec for a week now and its great until I try and do any thing computer related.....
only managed to get it to sync once and that was just luck, sometimes even when active sync says not connected I can still explore but wont sync but this happened only a couple of times?
the message says:
CRITICAL COMMUNICATIONS SERVIES HAVE FAIL TO START, TRY RESETTING THE MOBILE DEVICE, AND CONNET AGAIN.
which i have done loads of time including hard resets!
I had none of these troubles with my ipaq!
Tried:
uninstalling active sync (NOW 4.1)
turning off firewall
soft resets
hard resets
rom update (luckly done it the one time it did sync)
Calling O2 - dead loss tried to get me to call a premium rate number!!
Tried Microsoft’s sync 4 help page - this is when i got it to work the once, i opened properties in networks and checked and uncheck the box's and just seamed to come to life didn’t change any thing??
Tried it since and nothing happens?? Must have some thing to do with this but no luck so far..............
The second problem is TomTom 5 put on sd card put in xda and and it fires up for one second then nothing? Does the same when I open from PDA?
Ahhhhhhhh! its driving me crazy!!!!
sorry to go on but I desperately need help as don’t want to send it back?
Sorry also am I correct in saying you get a 2 week cooling of period with o2 so could send back with in this time and cancel contract?
@glen
did you try to install the latest 4.1 with the firewall switched-off?
What firewall s/w are you using?
(remember to uninstall all previous versions)
yes already had it running and used with ipaq 2210 and worked spot on!
and as mentioned fire wall is turned off
What firewall(s) are you running? I take it that when you say you switched your firewall off you also mean the WIndows firewall as well? What messages do you get when you plug it in? USB device not recognised or something, or does it not react at all?Have you tried trying to connect through Bluetooth, or by using a different USB port on your PC? If so and it still isn't working, there might be a fault in which case return it!
Fin
Also, sorry if its a silly question, but you have got at least Outlook 2002 on your PC?
pretty sure i have willcheck later? whys that?
It's just that if your device is connected (you can explore it etc) there doesn't appear to be a connection problem, the problem seems to be with synchronization, for which Outlook 2002 (or later) is needed. Maybe I'm barking up the wrong tree, but I had a similar problem when i tried to sync my Exec to my laptop (which only runs Office 2K) I had to install 2K2 from the disc which came with the Exec and all was fine.
At work I get a similar problem.
When I sync with the PC I need to start outlook first before connecting via usb, or else it comes up with an error and only allows me to explore the device.
At home it seems to work ok.
For me at work I think its down to activesync trying to do its thing before outlook has properly loaded.
i dont think this is the problem as i sure i have the xp pro version but will check when i get home...
but saying that the exec connets fine at work?
but thats windows 2k
On mine here are my observations and what I did:
1) I deleted poutlook.ink from the start up folder. This seem to help and at the same time reduces any notification errors after a soft reset which I noticed occurs if I have either sadaemon.ink and poutlook.ink on the start up folder. As of now I only have handymenu.ink in there, a program that I use to launch some system applications.
2) I also noticed that for my computer to recognize my EXEC, I need to plug it in when it is OFF. If I plug it in when it is ON, I get the message device not recognize. If I forgot and plug my EXEC while it is ON, definitely, the message device not recognize appears, so I just disconnect my EXEC from the USB cable. Then turn my device OFF by pressing the power button and plug it back to the USB cable after 10 seconds.
3) Remember not to connect your EXEC immediately via USB cable if you just closed the screen and assume it is already OFF. You have to make sure your EXEC is OFF by turning it OFF using the power button or at least you have exceeded your set time for device activity while on battery power.
4) If however after all these precautions and I still get that message device not recognize, which I seem to experience 1 in 50 tries. I just disconnect my EXEC from the USB cable, make sure I turn it OFF using the power button and plug it back in.
5) I also ONLY experienced this problem to have occured after I upgraded my radio version to 1.06.00. BUT this is a small price to pay for the added benefit of that upgarde.
With these in mind, I always connect without any problems. The message device not connected, I only experience 1 in 50 tries, so I am happy with that.
checked outlook and i have 2002 sp3, going to try the over thing mentioned
tried all those tips and i still get the same message:
CRITICAL COMMUNICATIONS SERVIES HAVE FAIL TO START, TRY RESETTING THE MOBILE DEVICE, AND CONNET AGAIN.
which i have done loads of time including hard resets!
I had none of these troubles with my ipaq!
Is your USB cable plugged directly into your PC? I have had problems syncing before when my device was plugged in through my monitor instead of directly.
Thanks chaps i sorted it at last!!! only took 2 weeks!!!
it was the firewall after all just turning it of was not enough uninstalled it the got norton and set up prop as on microsoft web sight.
job done!
just got to sort tomtom prob now, but brought step by step instrucions of ebay for a fiver!!
looks like a rip of but had bits of the guy before so figures crossed!
if any good ill post up here........
hi, i have a qtek s200 and it no longer connects to the internet thru my pc anymore, havent found out why, and when i plug in my phone thru usb it gives me this error "Synchronization cannot be started because you are not able to log onto the network and access information. Restart your desktop computer and synchronize again. If the problem persists, contact your network administrator. " So i restarted still nothing, deleted phone and reinstalled it again through sync center and mobile device center still nothing has worked, it worked perfectly an hour ago downloading weather updates for spb weather and now nothing only think that i changed on my pc was limewire/java. anyone have a clue whats going on?
thanks alot
swiftk1 said:
hi, i have a qtek s200 and it no longer connects to the internet thru my pc anymore, havent found out why, and when i plug in my phone thru usb it gives me this error "Synchronization cannot be started because you are not able to log onto the network and access information. Restart your desktop computer and synchronize again. If the problem persists, contact your network administrator. " So i restarted still nothing, deleted phone and reinstalled it again through sync center and mobile device center still nothing has worked, it worked perfectly an hour ago downloading weather updates for spb weather and now nothing only think that i changed on my pc was limewire/java. anyone have a clue whats going on?
thanks alot
Click to expand...
Click to collapse
Windows Vista?
Its caused by your notes..try unchecking your notes in activesync...or create a new profile in outlook
Hi all, I have a frustrating problem with my Cingular 8525. I just formatted the comp and installed Vista Ultimate on it fresh. I downloaded WMDC but I can't get it to recognize my phone for the life of me. It keeps saying "connecting" forever and never does. I have done all sorts of installs, re-installs, hard resets, but I can't get it to detect at all! Can anyone help? Thanks in advance.
NYKUNLV said:
Hi all, I have a frustrating problem with my Cingular 8525. I just formatted the comp and installed Vista Ultimate on it fresh. I downloaded WMDC but I can't get it to recognize my phone for the life of me. It keeps saying "connecting" forever and never does. I have done all sorts of installs, re-installs, hard resets, but I can't get it to detect at all! Can anyone help? Thanks in advance.
Click to expand...
Click to collapse
first try to install the driver of your device.. go to device manager and look for unknown device at OTHERS..
good night and good luck
The driver is installed... it displays HTC USB Sync. I am getting frustrated . Stupid Vista.
USE the search function dude
Hermes vista config guide
Also make sure you dont have any firewalls active. I have had issues syncing my phone with my computer when using AVG's firewall. I simply disabled the firewall and it fixed my problems.
mrvanx said:
USE the search function dude
Hermes vista config guide
Click to expand...
Click to collapse
I already tried that guide... still not working. Ill try disabling the firewall
go to settings->connections->usb to pc and then check Enable Advanced network functionality.
If that doesn't work remove/uninstall htc sync device, unplug device and plug in device to reinstall the htc sync device after you have set the usb to pc connection settings.
Also try using a different USB cable and plugging it into a different port, you never know, it could just be something defective.
But I'm putting my money on the firewall
I had a problem connecting my 8525 to my Vista machine. It would say connecting but it would never finish 'connecting'. It took a while but finally I figured out what was causing it. It was the 'recording' .wav files in the notes directory that were causing the issue. If you have any .wav files in your notes directory I'd suggest moving them to say your SD card or deleting them. That fixed the 'connecting' problem for me and since I did that it's been syncronizing fine ever since.
I tried everything listed in here at once.... something worked I should have done each step by step to pinpoint what exactly... but its working now. Thanks everyone!
NYKUNLV said:
I tried everything listed in here at once.... something worked I should have done each step by step to pinpoint what exactly... but its working now. Thanks everyone!
Click to expand...
Click to collapse
Same for me. I had a load of problems getting the Mobile Device Center working with my HTC TyTN. First I was unable to even install the driver when I first connected my device. The "add new hardware" wizard always tried to connect to Windows Update and install an updated driver which then failed. The solution was to let it fail and manually install an older driver from the list using the icon in Device Manager. After that I could start Windows Update and download the latest update.
Then I had the same problems as you describe. When I started WMDC it just hung while displaying "Connecting". Looking in the task manager I noticed that the wmdc.exe process was consuming more and more memory, up until something like 250 MB, after which WMDC just showed "Error". Finally I got it to work. It is hard to pinpoint exactly what I did to fix it. I know that the "advanced network features" under USB in connection settings on the TyTN need to be ticked and the device showing as a Windows Mobile Device instead of HTC USB Sync.
Initially I did a hard reset of the TyTN. Further, I manually unistalled and reinstalled the driver in Device Manager a couple of times. I tried to reboot both the computer and the TyTN several times. Also, I did restart the "Windows Mobile-based device connectivity" service after plugging in the cable. Finally it just recognized my device and I could setup the partnership. Now I can sync over bluetooth too and skip the cable.
HTC phone support was not very helpful with this problem. "We will call you back". Yeah right.
Mobile cofiguration:
Dopod 838 Pro
LVSW 4/17/07 WM6
Hard SPL
PC configuration:
Windows Vista Business Edition
I encountered the same problem. Currently able to sync back by hard resetting my device. The USB to PC connection on settings does not appear to affect the sync problem.
I suspect that the problem arise when I originally sync with an XP machine.
What worked for me was to enable the advanced usb setting on the phone as mentioned...then while the phone is still plugged in, I removed everything associated with the phone from device manager on the pc. Once that was done, I unplugged the cable, waited a few seconds, and plugged it back in (with the advanced usb settings still checked.) Worked like a charm with WMDC.
I had problems with all sorts of "connectivity" in Vista, including connecting up my Trinity, and setting up my xbox 360 as a media extender.
As soon as I uninstalled MS One Care it all started working.
i have tried several soft resets, hard resets, uninstalling activesync, reinstalling activesync and none of my computors will recognize my mogul. i have checked settings and for the life of me i can't seem to figure whats going on. can anyone please help?
Try this, go to:
Start > Settings > Connections tab > USB to PC
Uncheck "Enable advanced network functionality"
My VX6800 will not connect to Active Synch with this enabled. Hope it helps.
Ks.
same boat...
i have the same problem. uncked the advance network settings, no go.
have synced before.
now looks like pc doesnt even see ppc plugged in.
wierd cause usb will charge phone but no connection.
One other thing I had noticed on mine during all this was that once the phone was in this state I would have to manually stop Active Sync on the phone and then reconnect to the PC.
try deleting the activesync partnership on the phone (not the pc)
Where do you do that at?
wwillie said:
Where do you do that at?
Click to expand...
Click to collapse
In activesync under menu|options|delete
I don't know if this is relevant to your issue but I had the same problem however, I was connecting my phone to my PC via a USB hub. I connected great the first time and when I tried to connect the second time Active Sync on my PC would not find my phone. What I ended up doing was unplugging my printer from the USB port on my PC and plugging my phone directly into the PC and it found it fine. This also happened with a card reader I have. I guess what I'm trying to say is that if you aren't plugging your phone directly into the USB port on your PC that may be what's causing the problem.
i have looked in the activesync on my mogul and the options isnt bold face print. the options is empty. im at total loss. i call a sprint rep and they said it was the phone.
I had the same problem, it went away when I updated the ROM!
Active sync worked for a about a week, it would not connect so that I could install applications, albeit I could browse the device using the explorer function.
(all of the following failed: deleted active sync profiles, disabled firewall, reinstalled activesync, hard reset and tried to use sprite backup restore (for contacts, which failed))
qu1nn
quinn, how did u flash a new rom if u can't activesync?
Try everything here first:
http://forums.microsoft.com/windowsmobile/ShowPost.aspx?postid=2620369&siteid=65
Then try a hard reset before flashing.
still stuck
i read the microsoft forum and to be honest nothing there helped me. there was another person on there that had the same issue but no one there seemed to resolve it. has anyone found a workable solution? i have read in another forum that i would have to call sprint because it might be an issue with the phone. i would try that venue except my phone has been flashed to cricket. any suggestions?
I had the same problem after spending lotof time trying all the things already posted, I find a solution that worked for me I hope works for you
in your pc go to:
C:\Program Files\Microsoft ActiveSync
then find WCESMgr.exe right click in the mouse and doble click run as
then type your login and you should be able to get back your sync
hope it work sfor you
try this... http://forum.xda-developers.com/showthread.php?t=349997
I noticed that on Windows XP you have to uncheck the Enable advanced network functionality. If this does not resolve your problem Try plugging your phone into a different usb port on your computer. If this resolves your issue, You should consider deleting the phone from Device Manager. When you plug it in again it will reinstall the drivers and work.
On vista I have not experienced these issues. You can leave the Advanced network func checked.
Hope this helps,
DaWar
dawarrior_vex said:
I noticed that on Windows XP you have to uncheck the Enable advanced network functionality. If this does not resolve your problem Try plugging your phone into a different usb port on your computer. If this resolves your issue, You should consider deleting the phone from Device Manager. When you plug it in again it will reinstall the drivers and work.
On vista I have not experienced these issues. You can leave the Advanced network func checked.
Hope this helps,
DaWar
Click to expand...
Click to collapse
yo I did this on my mogul and my computer recognized it but as a hardware. IT said something like this:"htcusbplug" i installed it but it still doesnt open up activesync.
@ artenis: im having the exact same problem...wont recognize the device at all, even though it charges fine...(im running alex's wm6.1 beta 2 rom...could wm6.1 have something to do with it?)
i had the exact same issue with my sprint mogul, tired everything, formatted my laptop, reinstalled activesync, hard and soft reset the phone, tried other usb/computers, nothing. luckily i have sprints EPP and just took it to the store for a swap for a new mogul, got a new box and everything.. good luck
Same problem with Vista Ultimate 64bit
I had the same issue with my desktop, but after trying everything I could think of, decided to give Microsoft a try.
The drivers included in the pre-installed version of Windows Mobile Device Center would not allow the computer to recognize the Mogul, so I simply reinstalled the application from here: http://www.microsoft.com/windowsmobile/devicecenter.mspx
Everything works fine now.
Hello
When I connect my hd2 to the pc throught the USB cable, the message on hd2 shows up to click sync but my computer can't see the hd2.
I went to device manager but it doesn't show up.
it worked 2 day ago, I even tryed at another PC.
I can recharge the phone from my computer...
deadmau said:
Hello
When I connect my hd2 to the pc throught the USB cable, the message on hd2 shows up to click sync but my computer can't see the hd2.
I went to device manager but it doesn't show up.
it worked 2 day ago, I even tryed at another PC.
I can recharge the phone from my computer...
Click to expand...
Click to collapse
Firstly, what operating system are you using on your PC?
Secondly, have you tried deleting the sync partnership on both your phone and the PC and recreating it?
Thirdly, try and connect your phone directly to the USB root hub on your PC and not via a hub.
The fact that the HD2 is identifying the physical connection suggest the problem may lie at the PC end. Recreating the sync partnership is probably all that's needed.
Hello
If you are using Vista or Win7 you need to download Microsoft Mobile Device Manager to get a successful connection. Once you download this and install all will be good.
There is an option (can´t remember where) where you can disable fast link for ActiveSync.
This fast option has created me a lot of problem.
i'm using win7, i reinstalled the mobile device.
If i disable enable faster data sync then I can sync the phone with the computer but if I enable faster data sync then the 3G band auto enables...
I have just in the last weekend somehow lost the ability to connect to any computer. I have an activesync connection with work and a connection via hsdpa to the server too, and then one via wmdc on my vista home computer.
All has been going swimmingly until the weekend when I noticed that it had stopped synching new appointments.
The computers (both) now no longer even detect the phone, although it does charge via the usb cables.
The settings are still set to sync on the phone (as opposed to say disk drive).
I've tried a bunch of things, and now annoyingly, have hard reset the phone, but no joy!! Now I have the joy of setting everything back up again... But still no synchronising with the computer.
Any thoughts would be greatly appreciated.
bcorgan said:
I have just in the last weekend somehow lost the ability to connect to any computer. I have an activesync connection with work and a connection via hsdpa to the server too, and then one via wmdc on my vista home computer.
All has been going swimmingly until the weekend when I noticed that it had stopped synching new appointments.
The computers (both) now no longer even detect the phone, although it does charge via the usb cables.
The settings are still set to sync on the phone (as opposed to say disk drive).
I've tried a bunch of things, and now annoyingly, have hard reset the phone, but no joy!! Now I have the joy of setting everything back up again... But still no synchronising with the computer.
Any thoughts would be greatly appreciated.
Click to expand...
Click to collapse
Did you reboot the PC? I occassionaly have problems with activesync stopping working suddenly. It doesn't really like being unplugged sometimes and get's a bit ansy about it. I've found that sometimes a soft reset of the phone does it, but sometimes I need to reboot the PC.
I hope you did try rebooting the PC before you did a hard reset. At least you wouldn't have wasted your time with having to set up your phone again!
Yes did indeed! Restarted both. But the fact that it's affecting 2 computers suggests to me that it's something wrong with the phone, and not computers themselves.
HTC haven't been any help as yet - just haven't responded to my requests.
bcorgan said:
Yes did indeed! Restarted both. But the fact that it's affecting 2 computers suggests to me that it's something wrong with the phone, and not computers themselves.
HTC haven't been any help as yet - just haven't responded to my requests.
Click to expand...
Click to collapse
The fact that it still doesn't work after a hard reset leaves me at a loss!
You're telling me!
Before anyone asks also, I've tried different cables and different usb ports on both computers too.
Any other thoughts out there? I'm starting to think now it's something inside the phone - i.e. the usb port?
Fixed for me!
After having sent off the phone to HTC, it was repaired in 8 days and that was sending it to and from Sweden to the UK!
Turns out the usb connector in the phone itself was not working. 10/10 for HTC repair service!
If you use the XPP OS.
You must select ‘To enable faster data synchronization’ (i dont konw how to translated that, sorry my English.) under the ActiveSyuc.
If you use the Vista OS.
You dont select this option otherwise you cannt connect you phone to computer.
me too,..i can't connect with my pc... my computer show me found new hardware & need 2 install driver,...tell me what kind of driver need...? thank!!!
me too,..i can't connect with my pc... my computer show me found new hardware & need 2 install driver,...tell me what kind of driver need...? thank!!!
Click to expand...
Click to collapse
Microsoft Corporation - Other hardware - PocketPC USB Sync
Download size: 11.1 MB
You may need to restart your computer for this update to take effect.
Update type: Recommended
Microsoft Corporation Other hardware software update released in May, 2007
At present, I'm confering with Microsoft about the issue I'm having with my Vista laptop. It finds the correct driver with windows update, but the driver fails to install even with a clean boot.... they're working on it...
deadmau said:
Hello
When I connect my hd2 to the pc throught the USB cable, the message on hd2 shows up to click sync but my computer can't see the hd2.
I went to device manager but it doesn't show up.
it worked 2 day ago, I even tryed at another PC.
I can recharge the phone from my computer...
Click to expand...
Click to collapse
I had the same problem and 'solved' it by trying every other USB port, and (of course) the last one did it correctly.
bcorgan said:
You're telling me!
Before anyone asks also, I've tried different cables and different usb ports on both computers too.
Click to expand...
Click to collapse
To make Active Sync work
Turn off Setup\other\USB to PC\ActiveSync Enable Faster Data Synchronization
The all will be ok
SOLVED!! Joy, joy, happiness glow... . I removed AVG 9.0, restarted, reinstalled WMDC and the driver (all of which installed automatically when I plugged my HD2 in to the USB port), and reinstalled AVG 9.0 and… Voila, MAGIC! I had AVG configuered correctly to allow WMDC to make connections and pass through the antivirus, but I still had to uninstall it to get the driver to install. Sometimes antiviruses are stubborn!
hi i had the same problem try this go to settings on your phone all settings connections usb to pc and uncheck the fast sync box if that dont work theirs an option that is somewhere on your pc where you can choose the pc to search for an update driver for that device
marquez2010 said:
hi i had the same problem try this go to settings on your phone all settings connections usb to pc and uncheck the fast sync box if that dont work theirs an option that is somewhere on your pc where you can choose the pc to search for an update driver for that device
Click to expand...
Click to collapse
I tried BOTH of those options prior to uninstalling AVG and no joy. Bytheway, I've switched to Microsoft Security Essentials and still have to uninstall MSE everytime I flash my HD2! UGH!