Related
Hi,
I have been suffering with a persistant Activesync connection problem. It usually connects and syncs fine the first time I boot my machine, but after around five minutes it almost always disconnects (though my Vario II continues to charge). Unplugging and replugging the USB cable does not work and the Activesync icon remains grey. Trying to start the connection manually either from the Vario II or from Activesync on the desktop also does not reconnect the device. In fact the only way to get it to connect again is to reboot my PC.
I'm using Activesync 4.2 downloaded from Microsoft this morning. I've tried deleting and recreating the partnerships, which does not help the issue. I've tried several USB cables which also do not resolve the issue, so I am now asking for your help.
If anyone has any insights into whaty might be happening I would appreciate your help...
Thanks,
Chris
I'm having the same problem, but in my case unplugging the cable from the device and plugging it again usually restarts the sync. Sometimes, however, I have to soft-reset to get it working again. Very annoying.
Hi Chris,
Ive had tons of issues with activesync on my works laptop..... I use a VPN and zonealarm... I used to have tno issues but since I got WM5 wich uses IP address's it always does the same thing as yours.. ive made sure the IP address is allowed in zone alarm.... my colleague also had this issue.. he managed to solve it by using a differnet USB port as his laptop has 3 one is on the side of the machine ... try using a different USB or disable zone alarm if you use it this could be causing the problem.
I sometimes get it to work if I have no VPN client running but as soon as I do use it the active sync stops.
Hope this may help you
James
I have exactly the same issue with my Vario II, never happened with my Vario and I have changed nothing other than my phone. Makes me think its summin to do with the harware possibly? Anyone else found a cure for this?
I Had the same problems, so I gave up on USB connection with active sync, I have 4 USB ports on my laptop and tried all, I now use bluetooth and works everytime.
There has always been problems with USB and actgive sync, so 4.2 was suppose to fix, but not for me.
I've got the same probelm on my Tytn. I've solve it to delete the Pocket Mechanic :shock: , I've done a S.R. and from now on the A.S. works correctly.
Ciao, Cesare
Had to use my old vario for a bit today, used activesync and it worked fine for the whole time I had it plugged in, got a new Vario II replacement today, got home and its exactly the same, would appear to be a mismatch between Vario II and activesync 4.2, can I connect by wifi?
Hello hmm the problem is if it uses direct or ip ,try go settings - connections - ( usb to pc ) and disable advance network funtctionality.
Hope that works
thanks
I had this problem too - I disabled advanced network capabilites in the "USB to PC" control panel under the Settings/Connections folder, and then Activsync stayed connected after that.
HTC TyTN 7/22/06 ROM
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
After the activesync working fine with my orange spv3100 for 4 weeks it suddenly refused to connect. I un-checked the "advanced functionality" box as suggested and it works again. Many thanks for the solution peeps.
I too would like to know what functions this deactivates.
Same problem, I've installed ActiveSync 4.5beta and now it stay connected, sometimes it disconnects but after restart of the phone it works again, one friend told me that the problem comes from the Activesync in the phone, so may be we have to look for the problem in the phone not in the PC
Activesync 4.2 problem
Hi all,
I too started having the same problems with Activesync 4.2 hanging my phone if left charging overnight. I decided to disable the advance network connection and that worked for a while. Now the phone wont sync AT ALL. It charges, but I can't do anything else. I reinstalled the Activesync 4.2, did a soft reset, off-on to the mobile, turn off-on my computer and still nothing. I will d/l Activesync 4.5 beta to see if that solves the problem, but it looks to be a problem with the Activesync in the mobile and not the one in the computer. I did the troubleshooting and it is detecting the USB connection but does not sync. I would really like to know if wireless sync can be achieved. Will post any fix if I find one. BTW my mobile is about a month and a half.
activesync always disconnect
fantastic_mr_q said:
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
Click to expand...
Click to collapse
hi,
where can i find ADVANCE NETWORK FUNCTIONALITY
pls help here im tired of this activesync problem
thank you
Sync problems with tytn
I've read through all the messages in this thread and wondered if someone could help me with some problems i've been having with syncing mine with a laptop. Often when I have the device plugged in when i boot up the laptop activesync won't start until i've disconnected the usb cable then reconnected it again-i never had this problem with the imate jam. My second problem arises when sometimes it says on the files section that there are un resolved items???? i then try to resolve the issue and a wizard comes up with add or remove buttons.afraid that i might remove something essential i tried the add button hoping this might resolve the issue-it didn't. i then gave up as nothing worked. after switching the laptop off and then syncing a day later there were no items to resolve so what exactly is happening. how can there be unresolved items one minute and nothing the next.also i hadn't done anything different on the tytn.if i select the add button on the window does it add a copy of the file highlighted and could this affect the operation of the device.Sorry if this seems a little confusing but i never had this problem with an xda exec or an imate jam.
please could someone help a non technical fifty something.
activesync always disconnect
fantastic_mr_q said:
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
Click to expand...
Click to collapse
hi,
where can i find ADVANCE NETWORK FUNCTIONALITY
I agree, where is this option?
I'm running version 4.2 and along the top bar all I'm seeing is:
File - View - Tools - Help
Nothing like "Settings" and/or "Connections" in sight. Under "File" there is the "Connection Settings" option, but nowhere does it mention "Advanced Networking Functionality".......
Can someone explain this please?!
The "Advanced Networking Functionality" is on your phone, not on desktop's activesync.
On WM5, go to Settings -> Connections -> USB to PC and you will find the "Enable Advanced network functionality" option.
pof said:
The "Advanced Networking Functionality" is on your phone, not on desktop's activesync.
On WM5, go to Settings -> Connections -> USB to PC and you will find the "Enable Advanced network functionality" option.
Click to expand...
Click to collapse
Every time I try that, I just get an error message saying: "Failed to disable RNDIS to use Serial".
Has anyone else seen this message? Happens regardless of whether the Vario II is connected by USB or not...
Thanks,
Chris
I'm still getting the RNDIS error, has anyone else come across this? Is there a solution?
Cheers,
Chris
Hi,
I couldn't find any other thread about this problem:
My O2 Xda neo has stopped detecting Wifi networks.
I activate Wifi in the comm manager, Wifi appears to work (the antenna icon appears, but not "radiating"), but never searches for wifi networks, only asks me to add a new one, whereas before a few weeks or so, it would display all the Wifi's found in my vicinity.
Anyone have any ideas?
Thanks,
n
i have the same problem...and couldn't find a solution for about 6 months on now....=(
Have you try on setting\connectons\wifi ? it has the list of avaiable wifi access points that were detected when you turn on wifi on comm manager.
(with the wm5 rom on my prophet, it auto connect to wifi access point whenever i turn on wifi on comm manager but when i use wm6 rom, I have to go to setting\connectons\wifi and connect to avaiable access point manually )
maquan said:
Have you try on setting\connectons\wifi ? it has the list of avaiable wifi access points that were detected when you turn on wifi on comm manager.
(with the wm5 rom on my prophet, it auto connect to wifi access point whenever i turn on wifi on comm manager but when i use wm6 rom, I have to go to setting\connectons\wifi and connect to avaiable access point manually )
Click to expand...
Click to collapse
well....is good that u can manually connect....my one...i already on my WIFI from the comm manager there....but when i go to setting/connection/WIFI.....
i still cant find any visible connecting point for me....but my house is wifi hot spot....i sit beside the router still cant detect anything....><"
haiz....><"
are u on Active sync or not? I remember that the Active sync on winXP have an option to disable wifi whenever you connect to pc (I use window mobile device center on Vista and don't remember exactly ).
sometime, when i can't connect to wifi, I check on setting connection and I found that the wifi icon with the name "WIFI" is replace with the same icon but with name "network card". I just soft reset and everything was fine then
Try Hard Resetting the Device
I have the same problem here with prophet g4 and wm6.1 konrad (tryed shadow's too).
Autosearch of wifi networks is missing.
maybe this our solution:
but how to proceed??
I wonder if this is hardware rather than software. Try an official WM5 (AKU2.2) ROM from the ftp/wiki and see if you still get this problem.
Can a hardware issue be fixed???
Hey all I am having the same problem on a Wizard wifi LED is blinking antena icon is up but no detection of APs I am ready to throw this thing. Some one hook a soln up please!!!
Hi,
after upgrading my unbranded HTC Tytn to more recent WM5 version through official ROM upgrade from HTC (italian version QTEK_405), the activesync connection only works if I connect via Bluetooth or IR.
The USB connection doesn't seem to work anymore.
Activesync seems to try to connect, but after a while I get the "cannot establish a connection..." message.
Checking the Network Connections on the PC, it looks like there is in/out traffic packets on the device, but nothing else happens.
Also tried on another PC and same behaviour.
Activesync version is 4.5 build 5096.
Any idea also how to test that USB connector is working properly, to narrow down the problems ?
Thanks in advance
Did you try disabling the "Enable Advanced Network Functionality" checkbox in START-SETTINGS-CONNECTIONS-USBtoPC?
Also if your are running WinXP or Vista... with your phone connected with the USB cable. Check in the Device Manger, for any "unknown devices". Select them and remove.
Now disconnect your phone from your computer. Then do a "Soft" reset on your phone. Now reconnect through the USB and does it recognize it as a ppc device?? now try to ActiveSync again!!
Stuart
dgaud007 said:
Did you try disabling the "Enable Advanced Network Functionality" checkbox in START-SETTINGS-CONNECTIONS-USBtoPC?
Click to expand...
Click to collapse
Yes, no success.
I can see in the Device manager that the network card is replaced by a USB device, but nothing happens on Activesync side.
scl_electronics said:
Also if your are running WinXP or Vista... with your phone connected with the USB cable. Check in the Device Manger, for any "unknown devices". Select them and remove.
Now disconnect your phone from your computer. Then do a "Soft" reset on your phone. Now reconnect through the USB and does it recognize it as a ppc device?? now try to ActiveSync again!!
Stuart
Click to expand...
Click to collapse
Tried that.No unknown devices.
I've uninstalled the newtork card corresponding to the Tytn, disconnected and soft reset the device.
It seems to reinstall it properly, but still same behaviour.
One thing that makes me wonder is why the device shows as Windows Mobile-based device #3.
Anything I can do to celanup this ? It looks like it's got some old device hanging.
What about ActiveSync on the ppc? Do you have the "Synchronize all PC's using this connection" checkbox checked? Does it point to "USB" below the checkbox? What do you have in that MENU-CONNECTIONS... screen on the PPC?
Damn it Ive been having one problem after another with my 8525 just when I think things are going good there is another set back.
My phone wont sync to my computer anymore. I have Schaps 4.20 installed and I installed the cube earlier today just to see what it was like because I was going to upgrade to shaps 4.3. Now its time to upgrade and when I connect my phone to my pc i get a message that says "usb device not recognized"
What the heck is going on?
I uninstalled the cube from my ppc did 2 soft resets, restarted my computer and it still wont recognize my pcc
Im getting a message that says "one of the devices attached to this computer has malfunctioned, and windows does not recognize it"
It goes on to say "Try reconnecting the device. If windows still does not recognize it, replace the device."
None of this sounds good. Im stressing out!
After two hard resets I finally got it to accept Shaps 4.3 rom. It still wouldnt do it after the 1st and 2nd hard reset but for some reason, the last time I connected it via usb, it worked.
THANK GOD! I dont know what happened and why it wouldnt connect but Im happy I fixed.
Activesync 4.5 Stuck saying "Synchronizing"
The post above saying:-
Did you try disabling the "Enable Advanced Network Functionality" checkbox in START-SETTINGS-CONNECTIONS-USBtoPC?
was the solution to a major headache I was having with Activesync 4.5 on a new HTC TYTN II connecting via USB. It would sit stuck with the sync indicator turning / swirling and a message saying synchronizing, but would not be doing any synchronisation!
I disabled the "Enable Advanced Network Functionality" in START-SETTINGS-CONNECTIONS-USBtoPC it it immediately began synchronising. Thought I would enable it again and it went back to just hanging there, definately needed to be disabled to rectify the problem.
Thanks.
ianb-uk said:
The post above saying:-
Did you try disabling the "Enable Advanced Network Functionality" checkbox in START-SETTINGS-CONNECTIONS-USBtoPC?
was the solution to a major headache I was having with Activesync 4.5 on a new HTC TYTN II connecting via USB. It would sit stuck with the sync indicator turning / swirling and a message saying synchronizing, but would not be doing any synchronisation!
I disabled the "Enable Advanced Network Functionality" in START-SETTINGS-CONNECTIONS-USBtoPC it it immediately began synchronising. Thought I would enable it again and it went back to just hanging there, definately needed to be disabled to rectify the problem.
Thanks.
Click to expand...
Click to collapse
I have to disable that on both my wizard and my trinity when syncing with either my XP computer with active sync 4.5 or my Vista computer which comes with WM Device Centre. The problem is since putting an otherwise rather excellent 6.1 rom on the trinity, nothing happens at all with that option disabled. With it enabled it connects but has the problem described above. On my wizard a message pops up when it establishes a connection, nothing happens on the trinity though. It was fine before with the original ROM. I am using [WWE][20-10-08]NiAx Trinity 6.1.70 BlueAngel - OS & SYS 20748 [ONLINE] any thoughts on what could be going wrong here?
Hi.
Anyone with same problem. I only have seen it on vista side. Working with 3g conectivity. One minute is connected with tray icon showing globe. Then 30 isnt connected with tray icon showing computers with red cross. Then again connected 3 minutes. It seems a problem between vista side and internet sharing service from snapvue. I ve seen this issue in other spanish shift. Maybe a spanish version problem? any idea?
Thanks
Not much help I know but see my thread titled 'continued vista connection problems'. Have you been using internet sharing to gain access to WM 6.0? i noticed Activesync was always starting on the snapvue side which I think is linked to the constant disconnections.
A full restore from the restore partition solved my problem and I now get a steady 3g connection.
Thanks for your response. Not alone now. Format is a solution but we should know the origin of this problem. Obviosly is related with the way connects to 3g, this is, using Internet Shared connection with snapvue...but...why suddenly activesync (client or server part) tries to connect the other side and breaks the internet shared connection? any idea?Did you install sp1? is your shift language english or other one? ( I am trying to discard sources of the problem).
pd. While I write these lines on winmo side I can listen vista side sounds (connect/disconnect each minute...)
Hi,
I did some changes and It seems (by now) the problem is solved. I ve playing with continous 3g connections. This is what I did (I dont know which one did the trick).
1) Disable activesync usb connections for both sides( I did it for vista side days ago but know I did too in snapvue size.
2) Sevice Sync bluetooth Server stopped and set manually.
3) Reset both sides
Now I ve a stable 3g connection....
Daniel
Glad you got it working. What do you do to disable Activesync on the Snapvue side?
I only noticed this problem after installing SP1 but I was working mostly with WIFI so cannot be sure there is a link.
gavmiller said:
Daniel
Glad you got it working. What do you do to disable Activesync on the Snapvue side?
I only noticed this problem after installing SP1 but I was working mostly with WIFI so cannot be sure there is a link.
Click to expand...
Click to collapse
Hi.
The problem is solved, now for sure. Open Activesync in winmo,then menu/connections and uncheck "use usb ...". I removed too the partership between both sides althought It isnt important, I think...
Thanks Daniel. Good to know incase it happens again.
Today I am having the same issue...mmm, I dont know what else I can do. I will post the events I can see in the event's viewer....
danielherrero said:
Today I am having the same issue...mmm, I dont know what else I can do. I will post the events I can see in the event's viewer....
Click to expand...
Click to collapse
Hi Daniel - are you still having these problmes?
Hi. I didnt have that issue anymore. I removed the partership whith the device on vista side. I remove "Usb connection option" on activesync in both sides. I uninstalled "Remove NDIS Share connection" (Device Manager) on vista side and rebooted. Then on restart vista recognized again the device(Remove NDIS Shared connection) after some minutes(5-10 min) and then all worked correctly. I think the last step did the trick. But I am not free of problems. Like I told before when I resume the device and It was hibernated/suspended for a long time (several hours) the 20% of times It cant connect 3g and even I cant restart vista but keeping pressed the power button. So, by now, If my device is going to stay suspended for a long time (night) then I turn it off......
pd. When I need connect vista and snapvue I turn the phone off. I enable usb connection in both sides and use usbtools. After using the connection I undo these steps and all works correctly by now (last 3 weeks).
Ensure too that Vista hasnt setup a new Windows CE device on Device Manager. To check it open Device Manager, then "See devices by connection" and check each usb connection. If you see any Windows CE device disable it. I think both Remove NDIS Shared connection and a Windows CE Device was fighting for the same usb connection (In my case)
danielherrero said:
Hi. I didnt have that issue anymore. I removed the partership whith the device on vista side. I remove "Usb connection option" on activesync in both sides. I uninstalled "Remove NDIS Share connection" (Device Manager) on vista side and rebooted. Then on restart vista recognized again the device(Remove NDIS Shared connection) after some minutes(5-10 min) and then all worked correctly. I think the last step did the trick. But I am not free of problems. Like I told before when I resume the device and It was hibernated/suspended for a long time (several hours) the 20% of times It cant connect 3g and even I cant restart vista but keeping pressed the power button. So, by now, If my device is going to stay suspended for a long time (night) then I turn it off......
pd. When I need connect vista and snapvue I turn the phone off. I enable usb connection in both sides and use usbtools. After using the connection I undo these steps and all works correctly by now (last 3 weeks).
Ensure too that Vista hasnt setup a new Windows CE device on Device Manager. To check it open Device Manager, then "See devices by connection" and check each usb connection. If you see any Windows CE device disable it. I think both Remove NDIS Shared connection and a Windows CE Device was fighting for the same usb connection (In my case)
Click to expand...
Click to collapse
OK, the only bit I hadnt tried was the uninstall of the NDIS in device manager. I'll give it a go and see what happens. Thanks again for this reply!
Thanks Daniel for your detailed description on this problem, which I also have. Interesting thing is that for me it only occurs when I am on the move with my Shift. No problems when my Shift remains on my desk (like others described in this thread: http://forum.xda-developers.com/showthread.php?t=381220&page=2 )
On your described solution: I removed the Vista/Snapvue partnership and the usb connection on both sides. But I am not able to do the next step: "Remove NDIS Share connection" in device manager, because it's not there (see attached screenshot). Does this mean it was never there, so I do not have to uninstall it? Or is there a different way to find it?
Hi.
Reset Vista to ensure It boots correctly. Then wait to be 3g connected. Once you are connected the device "Remote NDIS shared connection" should be there under network cards. Then uninstall it and reset again. Once booted you have to wait several minutes until vista detects it again and installs drivers.....
pd. And try to contact HTC. Maybe (only maybe) if HTC is reported with same problem from many people they releases a fix.....
Hi there,
That did not help at all!
Waste of time.
But thanks for the hint.
What DID help for me was closing WMDC through taskmanager.
When you just exit WMDC, task manager still shows that it is running there in the background and apperantly scanning your ports for mobile devices ore something.
I stopped it from running and have a stable connection now.
(replying from train right now)
greetz,
Pfeffa-rah
Pfeffa-rah said:
Hi there,
That did not help at all!
Waste of time.
But thanks for the hint.
What DID help for me was closing WMDC through taskmanager.
When you just exit WMDC, task manager still shows that it is running there in the background and apperantly scanning your ports for mobile devices ore something.
I stopped it from running and have a stable connection now.
(replying from train right now)
greetz,
Pfeffa-rah
Click to expand...
Click to collapse
Hi
Do you have to do this each time you start vista?
Cheers
firedup said:
Hi
Do you have to do this each time you start vista?
Cheers
Click to expand...
Click to collapse
I think you only have to do it after you used WMDC. On my shift it doesnot start at boot (not anymore...) If I want to sync shift or my kaiser, I need to startup WMDC manualy.
grtz,
Pfeffa-rah
My experiences so far.
Is it possible that it is the energy plan that is responsible for the loss of connection. I installed SP1, no problems it seemed. Today I wanted to use the 3G connection with the battery (balanced energy plan). And then it started to disconnect and to connect in small intervals. I did the routine Daniel described: uninstalled NDIS driver. Reinstalled it but connectivity problems remained.
Is it something to do with the battery powered system?
Because, as soon as stop using the battery, plugging in the power adapter again everything seems to be okay. I am not sure about it, but I think, when I use the max power option with the battery the connection stays and fails when I use the balanced energy plan.
So can it be that something in the energy plan is responsible for the loss of the connection?
Experts, does that make any sense?
I will give it some more tries.
S.
I had the High Performance powerplan on all the time......
had it to
Hi
This is a problem when sp1 is installed and you are using 3g in vista being in balanced or power save power plan. it has nothing to do with activesync and usb ports (i have never had a connection)
i called htc yesterday, they clamed they had never heard about it before, so please as many as possible call htc and tell them then maybe just maybe they would release a fix
in rhe meantime i uninstalled sp1 and everything works
In my case the solution is quite clear.
3G works in Balanced mode and in High Performance when power is plugged in. I am not so sure if it works in “Power Save” even when on power.
3G does not work when either on “Balanced” or “Power Save” when using the battery. Battery works in “High Performance” even when all the options are set like they are in “Balanced” mode.
This I found somewhere else in the forum. It is from Daniel and I guess he says the same, more of less.
Well. I ve been doing many tests and changes and I thing the sd, suspend crashes and 3g closed connections are gone.
I use equilibrated energy plan but I hadn’t any issue when ac connected so I ve modified this plan to make equivalent the behavior when not ac connected, but not success. The problems are still there. Its incredible because the configuration for ac connected/disconnected is the same I ve modified all the parameters (usb, expressPCI, , etc)
So I ve set High performance plan and I ve modified it a little bit, only screen brightness when no ac connected and now all works correctly. I start the system (no ac connected). Then I suspend / wake, hibernate/resume the system several times being ac no connected and the problems are gone. 3g connection is very stable. No crashes from standby to hibernate state. No sd missing problem. So by now I will keep in this "High Performance" modified state
pd. So It seems that a plan is compounded by customizable parameters by the user and hidden parameters)
Now, those who have not installed SP1. Is this really no issue for you? Or have you always been on power or always used “High Performance”?
Well, even when I plug in my external battery and the green light indicates that the machine has been plugged to power, even then it only works in “high performance” and not in the two other modes.
Very strange!
S.
Hi, I've some problem with wifi connections. I own a lynksis wag54g2 wifi router. I can establish a connection, but after some times (it's not standard, it may vary), my device disconnect from the router and it's not able to reconnect. All that i can do is plug off my router (i take off the ac adapter) and when it's up again my phone can connect. it's very frustating, but i don't know what to do? i've tried setting something in wifi preferences' on my phone but nothing change. i've also flashed my firmware to the new one, hoping that it could fix that problem, but it didn't. someone could help me?
you can update the firmware to a newer one. this would fix your problem.
forum.xda-developers.com/showthread.php?t=781149
Hello.
I have a problem with WIFI on Galaxy 5 (i5500)(Europa) too. They have already changed my phone with new one, but the issue remains. So, for the second time now, I was able to connect my phone to my router for the first time, but after the first interruption or disconnection of WIFI I could not access to wifi anymore.
When I enable wifi in the phone starts ''connecting'' but then reports ''interrupted'' eventhough the signal is recognised as strong.
Firmwire version is the latest available. Router is encrypted with WPA2. Also I can access to router with my HTC Tattoo (Click).
Does anyone know the solution?
I have a decision to make(today), becouse If there is no solution to this I will change to another phone as I still can (Galaxy Spica).
Advise please.
Thanks a lot
What router do you have? have you tried with any other wifi network? i said that because my have this problem only with my router, and not for example with my girlfriend's one.
I found a little fix for my router, linksys wag54g2: open up the config page (192.168.1.1), go for wireless tab, select protection page and click on save settings. that reload the router and my phone is able to connect again.
Hi.
Thanks for your advice. There is some problem with router.. When I restart router the wifi on the phone works until swiched off or interruption becouse being out of range. When I try to connect to wifi again does not work unless I restart router again. ..catchy.. Interfering with mobile connection also makes the drop of wireless connection on my computer, so I need to restart router. I don't know the permanent solution. If anyone has any idea how repair this forever please let me know.
Best,
Thanks
Hi,
Here is my problem with my wifi with the galaxy 550.
For security reasons, my wifi network can't be detected (invisible). If i want to connect a new device by wifi, I must first set my wifi visible and then register my device.
Then I set my wifi as invisible again and the device can connect automaticaly to my network without "seeing" my wifi network.
Problem is that once i set my wifi as invisible again, my galaxy fail to connect because the network is unvisible.
Is there anyway to fix this ?
I have just read similar post on another thread and replied find it here
I ahvent installed anything, perhaps its to do with the handset if its locked to a particular carrier? just a guess and a question...
cheers
helper
try to use static ip!!
CaptainTim said:
Hi,
Here is my problem with my wifi with the galaxy 550.
For security reasons, my wifi network can't be detected (invisible). If i want to connect a new device by wifi, I must first set my wifi visible and then register my device.
Then I set my wifi as invisible again and the device can connect automaticaly to my network without "seeing" my wifi network.
Problem is that once i set my wifi as invisible again, my galaxy fail to connect because the network is unvisible.
Is there anyway to fix this ?
Click to expand...
Click to collapse
I have an answer! Hope it works for you.
My provider gave me really easy solution for wifi connection not connecting even though it was my own network with all the right info. It worked great the first time, then for some reason the phone locked in the "off" position. So I removed the battery to reboot (later learned the right way by pushing the volume button on the left and the power button at the same time)
Anyway, try this....
turn phone off - remove battery - remove sim card - wait a few minutes - reassemble - then the network should log on with no problem.....Good luck!
HeiDuDer said:
try to use static ip!!
Click to expand...
Click to collapse
Didn't work :/
Super1285 said:
I have an answer! Hope it works for you.
My provider gave me really easy solution for wifi connection not connecting even though it was my own network with all the right info. It worked great the first time, then for some reason the phone locked in the "off" position. So I removed the battery to reboot (later learned the right way by pushing the volume button on the left and the power button at the same time)
Anyway, try this....
turn phone off - remove battery - remove sim card - wait a few minutes - reassemble - then the network should log on with no problem.....Good luck!
Click to expand...
Click to collapse
Didn't work neither.
I have same problem after upgrading to 2.3.5 Wi-Fi shown as it is Active, but it is turning off and on and scaning and off again all times
htc tattoo
hellllllllllllllllllllllllllllllllllllllllllllllll llllllllp hellllllllllllllllllllllllllllllp
heeeeeeeeeeelp
helppppppppppppppppppp
I have same problem after upgrading to 2.3.5 Wi-Fi shown as it is Active, but it is turning off and on and scaning and off again all times
I have same problem after upgrading to 2.3.5 Wi-Fi shown as it is Active, but it is turning off and on and scaning and off again all times>>>>>>>>>>>>>>