any one help me my phone cant inter to twrp (remote: partition length get error) ) or erecovery and cant update with dload sdcard and cant flash it with fastboot and stay at dead screan and reboot
plz help me
The 1st thing you will need to do on any locked device is to unlock the Bootloader before you continue.
To unlock Bootloader you will need to use any of the Huawei paid services in order to do so.
Several are available for that and will need to check for that online.
now i unlocked my dvice and
i flhashed it with this method after they dead
and i flash twrp
and i flash oeminfo-p10lite-Emui 8 C432.rar with twrp
and now i download th full ota firmware but still cant flash it whith hwota method thay tell me chen they copied the updat fille that have no more space can you halp me plz
Try different Firmware. Sometimes there is a problem with that. Try to search for others that are good as well.
Related
Hay guys,
i had Beanstalk installed on my P9 Lite, then I wanted to test Stock MM Beta, in the flashing process the phone gave me an error and now I think it is fully bricked.
I cant enter dload or erecovery & when I try to flash system.img (extracted from stock b161) it says 'sparse flash write failure', if i try to flash cust.img it says ' partition error '
I already tried to boot into an costum recovery (revolution,twrp medicolous & nougat) but it ends all up in 'Your phone is booting now...'
Could you guys please help me?
The Walking P9 Lite Dead..
For fast unbricking use DC Phoenix (You need pay 15$ to D Unlocker for use there APP but IS 100% confirmed).
BadWolfYe said:
The Walking P9 Lite Dead..
For fast unbricking use DC Phoenix (You need pay 15$ to D Unlocker for use there APP but IS 100% confirmed).
Click to expand...
Click to collapse
What happens if it wont boot after I payed the 15 Dollars?
And is it really 100% safe?
I got a brick (dont enter un bootloader) and these program unbrick totally...
Didnt work...
Writing MODEM_FW partition with file C:\Users\chris\Desktop\DC_Phoenix\MODEM_FW.img
MODEM_FW partition UPDATE ...OK
Erasing CACHE partition
Partition CACHE erased
Writing CACHE partition with file C:\Users\chris\Desktop\DC_Phoenix\CACHE.img
CACHE partition UPDATE ...OK
Writing SYSTEM partition with file C:\Users\chris\Desktop\DC_Phoenix\SYSTEM.img
SYSTEM partition UPDATE ...FAILED
Erasing CUST partition
Partition CUST erased
Writing CUST partition with file C:\Users\chris\Desktop\DC_Phoenix\CUST.img
CUST partition UPDATE ...FAILED
Software written
04.01.2017 23:43:47 Writing device finished - INCOMPLETE
Test another update.app from tour original model
Now everything was succesfull with B161, but I´m still in bootloop, i tried to update via dload but its stuck at 5% and boots again after a few minutes..
Try factory reset & wipe cach from recovery and it will boot normal
Mine would fail at 5% in dload. Is your phone fully charged? It fails if not.
I flashed b161 in DC Phoenix, then let it boot to erecovery, left it charging overnight. Next morning dload flash of b161 worked up to 99% then failed. Then I tried again. 100% and boot.
Sent from my ONEPLUS A3003 using Tapatalk
Yes it was fully charged
Thanks guys for your help.
https://www.dc-unlocker.com/huawei-android-phone-flashing-factory-image
This guide finally let my phone boot, but IMEI is 00000000... & all systeminfos are 'unknown' but im installing the B161 with dload methode at the moment.
I hope I can get the IMEI & the rest back
Edit:
I thing my Phone is ready for the trashcan, because IMEI is 0000000 and its full locked, that meand i cant insert a SIM-card
xChelsy said:
Yes it was fully charged
Thanks guys for your help.
https://www.dc-unlocker.com/huawei-android-phone-flashing-factory-image
This guide finally let my phone boot, but IMEI is 00000000... & all systeminfos are 'unknown' but im installing the B161 with dload methode at the moment.
I hope I can get the IMEI & the rest back
Edit:
I thing my Phone is ready for the trashcan, because IMEI is 0000000 and its full locked, that meand i cant insert a SIM-card
Click to expand...
Click to collapse
With the app Chamelephon you can set the IMEI again with root access, you can find the IMEI on the original phone box.
The problem is that im unable to root my p9 lite, because bootloader is locked and i need IMEI to unlock the bootloader ..
wiped the data and system partition before flashing ?
you dont need imei, you need the code, if you have the code i think you can unlock the bootloader
spadyrus said:
you dont need imei, you need the code, if you have the code i think you can unlock the bootloader
Click to expand...
Click to collapse
I was able to unlock bootloader and flashed cm13 ..
But if insert my SIM card a grey screen popt up saying 'Insert SIM Code NCK' or so..
I closed bootloader & flashed Stock Rom via dload:
Now I will send it to Huawei
I think you change imei via pc program
I remembered this... And the imei is in the box of the phone (i'm not english, I don't know if BOX OF THE PHONE is fully correct ahah)
Device: VNS-L21 Europe Hello, before brick I was on new emui 5.0 firmware and I installed nougat twrp recovery by user @BadWolfYe and then I flashed this rom: https://forum.xda-developers.com/huawei-p9lite/development/unofficial-huawei-p9-lite-t3540493 (I was following all instructions) After reboot It was stuck on Phone is booting... And I tried downgrade guide from this thread: https://forum.xda-developers.com/huawei-p9lite/how-to/nougat-official-firmware-t3512932 I flashed oeminfo zip and dloaded update.app but unfornately zip where I get update.app was corrupted..... Now I have only Huawei eRecovery, dload and fastboot but It doesn't allow installing twrp!!! When I dload UPDATE.APP It says Software install failed. Failed to check the update package. Please download the package again. Please help me!!!!!!
EDIT: I found solution to enter in real recovery(TWRP for nougat)
What I did was:
1. Enter in fastboot
2. connect phone to computer
3. open cmd and type: fastboot -i 0x0fce oem unlock xxxxxxxx (replace xxx with your code)
4. accept fastboot unlock
5. And then it magicaly booted into twrp (my phone's fastboot was unlocked before)
Now I am going to flash back emui 5.0
And then downgrade to emui 4.1
And then I will try to install this: https://forum.xda-developers.com/huawei-p9lite/development/unofficial-huawei-p9-lite-t3540493
Later I will update this post and I will write does it suceed or fail.
Edit 2:
I flashed emui 5.0 with dload and UPDATE.APP
Try to recover your phone using hisuite ?
simo255 said:
Try to recover your phone using hisuite ?
Click to expand...
Click to collapse
I wrote an edit how I repaired my phone
hello, i'm using Huawei P9 Lite VNS-L21. i tried to flash the stock nougat Firmware Which i actually did and it worked flawless! but there was a little problem because there wasn't any Software update option in there, so after that i wanted to downgrade to stock MM. IDK what happened wrong while installing that, my phone got BRICKED. i don't have the Erecovery and twrp either. i cant flash firmware via DLOAD Method. the only thing i have is FASTBOOT mode..
i tried literally everything.. but nothing working..
I sent it to HUAWEI CUSTOMER CARE and they returned it back after a couple of days...
im really very worried because ive been using this phone for like 2 months ... and now im helplesss, If anybody is reading this please help/ assist me out of this..
Like the title already says, I wrongly flashed the oeminfo of the L21 C432 on my L31 .
Now when I want to rewrite the oeminfo via fastboot I have no access because there is a FRP lock (Bootloader unlocked).
Currently I only see two options:
1. Try to flash a firmware via dload (tried some already, not working) and then flash the original oeminfo again. But is the firmware of a L21 even runnable on the L31?
2. Use DC-Unlock. The question is what should I use there? Is flashing a completely new firmware also overwriting the bad oeminfo? I don´t think so. Or should I remove the FRP lock, flash a new oeminfo and hope that dload is working then?
I hope someone can help me. Such a stupid mistake is just so frustrating, didn´t happen to me in all the years of flashing phones
you can try the dload method using a L21 firmware...
str8t said:
Like the title already says, I wrongly flashed the oeminfo of the L21 C432 on my L31 .
Now when I want to rewrite the oeminfo via fastboot I have no access because there is a FRP lock (Bootloader unlocked).
Currently I only see two options:
1. Try to flash a firmware via dload (tried some already, not working) and then flash the original oeminfo again. But is the firmware of a L21 even runnable on the L31?
2. Use DC-Unlock. The question is what should I use there? Is flashing a completely new firmware also overwriting the bad oeminfo? I don´t think so. Or should I remove the FRP lock, flash a new oeminfo and hope that dload is working then?
I hope someone can help me. Such a stupid mistake is just so frustrating, didn´t happen to me in all the years of flashing phones
Click to expand...
Click to collapse
did you ever manage to fix this? I'm stuck in the same loop except my frp is unlocked but my bootloader is locked (Shows in the fastboot white screen mode) I tried to flash via dload method everything from B150 till B380! I was running Nougat rooted and I wanted to downgrade back to MM via flashing oem from twrp but I messed things up!
i cant even dload firstly because i have twrp and 2nd my phone goes stright to erecovery and i cannot find a way to either flash my oem info from twrp back up on my pc or to get new firmware.
so i had a p8 lite wich i tried rooting and it got stuck in a bootloop.
this worked for me
WARNING: this does delete everything you have (actually that is already gone)
(read all the way before doing anything)
first i set up adb & fastboot on my pc
https://youtu.be/UN7XW4HnFT8
2nd i downloaded stock firmware from huawei site ( you can also get this from rootjunky)
3rd i used HuaweiUpdateExtractor to get the recovery boot system and cust out (out of UPDATE.APP the one from the firmware)
4th i booted my phone into fastboot (i connected my phone to my pc first because otherwise i couldnt get into fastboot mode)
5th u start the command prompt in the adb&fastboot folder and type these commands (if you dont have custom recovery or custom roms you can skip to 5(i think i didnt do those)) :
1 adb devices (if it doesnt find it wait some time or reconnect it it will pop up sometime)
2 fastboot erase cache
3 fastboot flash boot BOOT.img
4 fastboot flash recovery RECOVERY.img
5 fastboot flash system SYSTEM.img
the system .img is too big so it will go in 6 parts and will often fail but just keep trying make sure to wait long enough because maybe it is still busy
6adb reboot
it should start up now.
these steps worked for me also when i did step 2 i could get into Erecovery wich i could before but now i could erase cache and something else and do a factory reset just press erase on everything then continu
https://forum.xda-developers.com/showpost.php?p=72567024&postcount=5
Mine is stucked too on "device is booting" is it really working ?
I was going to hang myself ...
---------- Post added at 10:21 PM ---------- Previous post was at 10:04 PM ----------
fastboot flash cust cust.img
returned me FAILED (remote: partition error)
Any idea ?
boot.recovery and system images all give me error Failed (remote:command not allowed ) Any advice ? Thanx
Wezdroid51 said:
boot.recovery and system images all give me error Failed (remote:command not allowed ) Any advice ? Thanx
Click to expand...
Click to collapse
yes i had that too in the beginning.
but i dont remember what i did.
i thing i just cleared chache and stuff using adb .
but anyway just keep trying the first few times i loaded them didnt work either
will try it
Hi Jan thanx will try it and let you know . Coz currently my device can only go into fastboot and rescue mode nothing else and with commands I can only use fastboot commands ofcoz and not adb commands coz my device is not in debug mode .
Same problem here
i get remote:command not allowed every time i want to use "fastboot flash boot boot.img"
Anyway to fix it ?
Unlock the bootloader again guys
please help me i hase emui 4..1
and i install twrp 4.1 and when i install nougat i install
supersu_v2.79_sr2 then
update_2 but when istall update it stop on writinh ratio i shut dun the phone but no login to twrp or to stock recovery
help me plaese
i flashed twrp from SRKTool the phone bootloop and i canot poweroff please help me
i was on 4.1 and i was unlock bootloader and twrp and i was insall nougat l29c185b560 wich have 3 files
supersu_v2.79_sr2 ----update_2------update_data_full_hw_meafnaf
when i flash update.zip in twrp it stop install on ratio i sutdown the phone and now the phone
is bootloop and not shutdown i try flash many recovery same problem my phone
is l29c185b--
https://forum.xda-developers.com/mat...icial-t3556789
I canot power off my phone but when I waited until the battery was discharged but the phone restart alone
I use method two by flash .img cust complet recovery complet boot complet but when flash system.img faild the rom exracted is l29c185b320
I try flash boot cust boot and system from nougat it complet but the problem same I canot dload I canot boot to recovery for wipe and the phone stay restart
please any help when I was flash nought it not complet it stop on writing ratio so I power off phone then the problem haben
boot loop any help my phone !!!!
XD
Omg thank you so much id give you money if i had any!
Bootloop
My phone is not unlocked but i have managed to bootloop it when I tried to downgrade it using update.app but now when i try to use the update.app method it gets to 5% and then displays update failed.
When trying to run any of the fastboot methods you mentioned I cannot run it cause it displays "failed (remote: command not allowed)"
I do not have the bootloader unlock code as huawei is being retarded and do not provide that sevice no more can anyone help??
its a Huawei P8 Lite(the old one) ALE-L21 and came with C02 firmware.
My Imei:863323035412487 S/N QLF7N16B17004301
Any help would be appreciated
My original P9 lite is VNS-L22C635 , it japan version, unlocked bootloader, twrp, and changed oeminfo to L21C432.
Now, my device can update succesful firmware C432 by dload method, but when it done and restart, it stuck on Huawei device animation. I tried every way, even change Oem to C636 and dload, still stuck huawei logo. Not boot to system.
I think i flashed wrong firmware, even changed device to another oem. Can anybody share me C635 oeminfo, i can not find one on interner. . May be after change oeminfo to original, and dload firmware, it can live again. Maybe, i not sure !
Please help me. Thanks
Unlock bootloader and try flashing via fastboot. Fastboot flash boot boot.img
...system.img...recovery.img
(Must unpack UPDATE.APP)