P9 Lite Dead - Huawei P9 Lite Questions & Answers

Hay guys,
i had Beanstalk installed on my P9 Lite, then I wanted to test Stock MM Beta, in the flashing process the phone gave me an error and now I think it is fully bricked.
I cant enter dload or erecovery & when I try to flash system.img (extracted from stock b161) it says 'sparse flash write failure', if i try to flash cust.img it says ' partition error '
I already tried to boot into an costum recovery (revolution,twrp medicolous & nougat) but it ends all up in 'Your phone is booting now...'
Could you guys please help me?

The Walking P9 Lite Dead..
For fast unbricking use DC Phoenix (You need pay 15$ to D Unlocker for use there APP but IS 100% confirmed).

BadWolfYe said:
The Walking P9 Lite Dead..
For fast unbricking use DC Phoenix (You need pay 15$ to D Unlocker for use there APP but IS 100% confirmed).
Click to expand...
Click to collapse
What happens if it wont boot after I payed the 15 Dollars?
And is it really 100% safe?

I got a brick (dont enter un bootloader) and these program unbrick totally...

Didnt work...
Writing MODEM_FW partition with file C:\Users\chris\Desktop\DC_Phoenix\MODEM_FW.img
MODEM_FW partition UPDATE ...OK
Erasing CACHE partition
Partition CACHE erased
Writing CACHE partition with file C:\Users\chris\Desktop\DC_Phoenix\CACHE.img
CACHE partition UPDATE ...OK
Writing SYSTEM partition with file C:\Users\chris\Desktop\DC_Phoenix\SYSTEM.img
SYSTEM partition UPDATE ...FAILED
Erasing CUST partition
Partition CUST erased
Writing CUST partition with file C:\Users\chris\Desktop\DC_Phoenix\CUST.img
CUST partition UPDATE ...FAILED
Software written
04.01.2017 23:43:47 Writing device finished - INCOMPLETE

Test another update.app from tour original model

Now everything was succesfull with B161, but I´m still in bootloop, i tried to update via dload but its stuck at 5% and boots again after a few minutes..

Try factory reset & wipe cach from recovery and it will boot normal

Mine would fail at 5% in dload. Is your phone fully charged? It fails if not.
I flashed b161 in DC Phoenix, then let it boot to erecovery, left it charging overnight. Next morning dload flash of b161 worked up to 99% then failed. Then I tried again. 100% and boot.
Sent from my ONEPLUS A3003 using Tapatalk

Yes it was fully charged
Thanks guys for your help.
https://www.dc-unlocker.com/huawei-android-phone-flashing-factory-image
This guide finally let my phone boot, but IMEI is 00000000... & all systeminfos are 'unknown' but im installing the B161 with dload methode at the moment.
I hope I can get the IMEI & the rest back
Edit:
I thing my Phone is ready for the trashcan, because IMEI is 0000000 and its full locked, that meand i cant insert a SIM-card

xChelsy said:
Yes it was fully charged
Thanks guys for your help.
https://www.dc-unlocker.com/huawei-android-phone-flashing-factory-image
This guide finally let my phone boot, but IMEI is 00000000... & all systeminfos are 'unknown' but im installing the B161 with dload methode at the moment.
I hope I can get the IMEI & the rest back
Edit:
I thing my Phone is ready for the trashcan, because IMEI is 0000000 and its full locked, that meand i cant insert a SIM-card
Click to expand...
Click to collapse
With the app Chamelephon you can set the IMEI again with root access, you can find the IMEI on the original phone box.

The problem is that im unable to root my p9 lite, because bootloader is locked and i need IMEI to unlock the bootloader ..

wiped the data and system partition before flashing ?

you dont need imei, you need the code, if you have the code i think you can unlock the bootloader

spadyrus said:
you dont need imei, you need the code, if you have the code i think you can unlock the bootloader
Click to expand...
Click to collapse
I was able to unlock bootloader and flashed cm13 ..
But if insert my SIM card a grey screen popt up saying 'Insert SIM Code NCK' or so..
I closed bootloader & flashed Stock Rom via dload:
Now I will send it to Huawei

I think you change imei via pc program
I remembered this... And the imei is in the box of the phone (i'm not english, I don't know if BOX OF THE PHONE is fully correct ahah)

Related

P9 Lite cannot flash stock firmware

I have a Huawei P9 lite. (VNS-L31 dual sim) . I tried to install medrom 3 and after flashing, phone didn't boot up. So I flashed b161 firmware again using 3 button method and phone booted up. Then I realized I couldn't add my google account. After searching on xda I found a method to fix that.(flashing oem info ). But after doing that, when the phone boots up after the huawei logo the error message which says "your device has been unlocked" has become red.( Usually it's yellow). And in about phone my model number has been changed to something like hi6250 or hi650.( Can't remember the exact thing). Then I tried to reflash my b161 firmware using 3 button menu and voila. It says incompatible version. I can't flash it. Then I replaced my build prop with my friend's phone's build prop. But unfortunately it has the B151 version. Though I have B161 version installed, my about phone says it has B151 version. And I can't flash stock firmware using twrp or dload method od any how. Please help
Nemeroz said:
I have a Huawei P9 lite. (VNS-L31 dual sim) . I tried to install medrom 3 and after flashing, phone didn't boot up. So I flashed b161 firmware again using 3 button method and phone booted up. Then I realized I couldn't add my google account. After searching on xda I found a method to fix that.(flashing oem info ). But after doing that, when the phone boots up after the huawei logo the error message which says "your device has been unlocked" has become red.( Usually it's yellow). And in about phone my model number has been changed to something like hi6250 or hi650.( Can't remember the exact thing). Then I tried to reflash my b161 firmware using 3 button menu and voila. It says incompatible version. I can't flash it. Then I replaced my build prop with my friend's phone's build prop. But unfortunately it has the B151 version. Though I have B161 version installed, my about phone says it has B151 version. And I can't flash stock firmware using twrp or dload method od any how. Please help
Click to expand...
Click to collapse
That's normal if the message is red, it means that the bootloader Will be relocked.
Now for the build prop, download b161 version, use huawei firmware extractor , extract boot.img system.img and cust.img
And by fastboot type :
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot reboot
And voila, b161 is installed in your phone !
Sent from my HUAWEI VNS-L31 using XDA Labs
I can ont flash the boot.img. I get this error:
D:\Software_Tools\Multimedia\Handy-Taplet\Handy\Backup\161_entpackt>Fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (13998 KB)...
OKAY [ 0.300s]
writing 'boot'...
FAILED (remote: Command not allowed)
finished. total time: 0.322s
Schrotty35 said:
I can ont flash the boot.img. I get this error:
D:\Software_Tools\Multimedia\Handy-Taplet\Handy\Backup\161_entpackt>Fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (13998 KB)...
OKAY [ 0.300s]
writing 'boot'...
FAILED (remote: Command not allowed)
finished. total time: 0.322s
Click to expand...
Click to collapse
If fastboot say "FAILED (remote: Command not allowed)", its because your bootlaoder is locked, reunlock it !
In TWRP it says unable to mount Data :/
Ax3noX_ said:
If fastboot say "FAILED (remote: Command not allowed)", its because your bootlaoder is locked, reunlock it !
Click to expand...
Click to collapse
I noticed that in TWRP it says unable to mount data :/ What can i do now
I don't know what is "mount data", i cant help you with that ?
Ax3noX_ said:
I don't know what is "mount data", i cant help you with that
Click to expand...
Click to collapse
Its okay. Still looking for a help dude. Any help is highly appreciated :good:
Nemeroz said:
Its okay. Still looking for a help dude. Any help is highly appreciated :good:
Click to expand...
Click to collapse
Code:
fastboot oem unlock XXXXXX
fastboot flash recovery recovery_stock.img
Unable to read/mount data says your encryption key got changed by something, whatever. You need to Wipe Internal storage and flash twrp again ( I recomment matic`s ) Reboot to recovery again, if you got one, flash a flashable fw via twrp. I Dont know if the stock recovery Accepts a fully wiped intern storage, i guess not and it declines the update.app method.
In the best case for sure you recover an older backup to get the Same enc. Key back
WieserZ1C said:
Unable to read/mount data says your encryption key got changed by something, whatever. You need to Wipe Internal storage and flash twrp again ( I recomment matic`s ) Reboot to recovery again, if you got one, flash a flashable fw via twrp. I Dont know if the stock recovery Accepts a fully wiped intern storage, i guess not and it declines the update.app method.
In the best case for sure you recover an older backup to get the Same enc. Key back
Click to expand...
Click to collapse
Try to hold Vol+ and the power button and if you enter in Huawei recovery, select wipe data / Factory reset
Ax3noX_ said:
Try to hold Vol+ and the power button and if you enter in Huawei recovery, select wipe data / Factory reset
Click to expand...
Click to collapse
Tried that. But didnt work mate 😔
Nemeroz said:
Tried that. But didnt work mate 😔
Click to expand...
Click to collapse
Flash oeminfo (dowbload in the ultimate guide of nougat) and put the update.app of the marshmallow version in the dload folder then hold Vol+, vol- and power.
Its worked for me
Tell me if it work
(Sorry for my bad english, im french
I'd recommend using SP Flash tool. It's saved my ass multiple times.
Where you got the Scatter File for the p9 lite
Nantonix said:
I'd recommend using SP Flash tool. It's saved my ass multiple times.
Click to expand...
Click to collapse
Spflash tool is flash tool only for mtk devices... And p9 lite doesnt have a mtk soc !
---------- Post added at 08:47 PM ---------- Previous post was at 08:46 PM ----------
hanzox5 said:
Where you got the Scatter File for the p9 lite
Click to expand...
Click to collapse
It doesn't exist !
i wanted to convert the device to dual sim, so i tried to restore the backed-up partitions using meticulus' TWRP. But it says unable to mount /data every time i try to format it.
I know i made a big mistake, but that's how i learn..
this thread has worked for me
https://translate.google.co.uk/tran...m/showthread.php?t=1261335&edit-text=&act=url
Hello I went back the MN when startups is only then the logo after screen dark
please help me !!!
sorry for my english
pinhpongk said:
Hello I went back the MN when startups is only then the logo after screen dark
please help me !!!
sorry for my english
Click to expand...
Click to collapse
do a factory reset..if doesn work reflash stock marshmallow b160

[Solved] Bricked P9 Lite

Hi, i have a big problem: my phone isn't starting up anymore. Before bricking my device, i was in b160(VNS L-21), then i decided to upgrade to Nougat. So i unlocked bootloader, flashed twrp etc.. Finally i got N working, after that i flashed Revolution twrp and ROM, everything fine. Then i decided to format data, just to get a "clean" ROM, but after this, my phone fell in bootloop and, i don't know why, i couldn't even get into twrp and if i try to boot into it, i just get stuck in the yellow text "Your phone is booting up..." forever. So i downloaded b160, extracted update.app and flashed system, boot, cust and recovery to try to get as stock phone was, but after that i couldn't boot into system: i just saw the yellow choices menu stuck with the same text "Your phone is booting up...", can't even see Huawei's logo. I tried to flash twrp for 6.0, but i couldn't boot into it cause it was replaced everytime by eRecovery. So i tried to install b160 from dload method and it worked but bootloader locked again and i don't have the password anymore, and after Huawei's logo there's just a black screen forever. I heard about some kind of "oeminfo.img" to flash before downgrading from N but i didn't do that cause i couldn't access twrp after formatting data. I tried to install via ota b100, b120, b130 without success, they all say incompatible firmware when i install them. I can just install b160 or b161 but they don't boot up. Please help me if u can, i'll really appreciate it
unlock you bootloader again !
flash revolution recovery b9
flash oem.info
dload b160 (Factoryreset, Bootloader locked)
Ron
RonPo said:
unlock you bootloader again !
flash revolution recovery b9
flash oem.info
dload b160 (Factoryreset, Bootloader locked)
Ron
Click to expand...
Click to collapse
I can't unlock bootloader again because i can't access system to get infos like imei etc, and i don't even have the code to unlock bootloader.. Btw, thank you for helping me
xDavi01 said:
I can't unlock bootloader again because i can't access system to get infos like imei etc, and i don't even have the code to unlock bootloader.. Btw, thank you for helping me
Click to expand...
Click to collapse
Try fastboot getvar all . Maybe it contains all the information you need
if not, dc-unlocker will do what you need. I've bricked my device and with their soft I've managed to write the full img. You should try only to unlock the bootloader service from them
You can look at the package of your P9 Lite. There should be a sticker on it with your IMEI.
Schlengge said:
You can look at the package of your P9 Lite. There should be a sticker on it with your IMEI.
Click to expand...
Click to collapse
Okay, i found it, but what about serial number and product id?
dondrog said:
Try fastboot getvar all . Maybe it contains all the information you need
if not, dc-unlocker will do what you need. I've bricked my device and with their soft I've managed to write the full img. You should try only to unlock the bootloader service from them
Click to expand...
Click to collapse
Thank you! Now i have IMEI and Serial NR, i just need Product ID. Is there a way i can get this?
Edit: I DID IT! YAY! I got bootloader unlocked, i used Huawei Product ID Generator, and typed "HUAWEI Y300-0000" instead of "HUAWEI VNS-L21" in Reformatting Lock Huawei's page, and it worked like a charm! Thank you for your help guys, you're the best
xDavi01 said:
Thank you! Now i have IMEI and Serial NR, i just need Product ID. Is there a way i can get this?
Edit: I DID IT! YAY! I got bootloader unlocked, i used Huawei Product ID Generator, and typed "HUAWEI Y300-0000" instead of "HUAWEI VNS-L21" in Reformatting Lock Huawei's page, and it worked like a charm! Thank you for your help guys, you're the best
Click to expand...
Click to collapse
for some reason that does not work for me VNS-31 :crying:

Huawei p8 lite Bootloop Fix

so i had a p8 lite wich i tried rooting and it got stuck in a bootloop.
this worked for me
WARNING: this does delete everything you have (actually that is already gone)
(read all the way before doing anything)
first i set up adb & fastboot on my pc
https://youtu.be/UN7XW4HnFT8
2nd i downloaded stock firmware from huawei site ( you can also get this from rootjunky)
3rd i used HuaweiUpdateExtractor to get the recovery boot system and cust out (out of UPDATE.APP the one from the firmware)
4th i booted my phone into fastboot (i connected my phone to my pc first because otherwise i couldnt get into fastboot mode)
5th u start the command prompt in the adb&fastboot folder and type these commands (if you dont have custom recovery or custom roms you can skip to 5(i think i didnt do those)) :
1 adb devices (if it doesnt find it wait some time or reconnect it it will pop up sometime)
2 fastboot erase cache
3 fastboot flash boot BOOT.img
4 fastboot flash recovery RECOVERY.img
5 fastboot flash system SYSTEM.img
the system .img is too big so it will go in 6 parts and will often fail but just keep trying make sure to wait long enough because maybe it is still busy
6adb reboot
it should start up now.
these steps worked for me also when i did step 2 i could get into Erecovery wich i could before but now i could erase cache and something else and do a factory reset just press erase on everything then continu
https://forum.xda-developers.com/showpost.php?p=72567024&postcount=5
Mine is stucked too on "device is booting" is it really working ?
I was going to hang myself ...
---------- Post added at 10:21 PM ---------- Previous post was at 10:04 PM ----------
fastboot flash cust cust.img
returned me FAILED (remote: partition error)
Any idea ?
boot.recovery and system images all give me error Failed (remote:command not allowed ) Any advice ? Thanx
Wezdroid51 said:
boot.recovery and system images all give me error Failed (remote:command not allowed ) Any advice ? Thanx
Click to expand...
Click to collapse
yes i had that too in the beginning.
but i dont remember what i did.
i thing i just cleared chache and stuff using adb .
but anyway just keep trying the first few times i loaded them didnt work either
will try it
Hi Jan thanx will try it and let you know . Coz currently my device can only go into fastboot and rescue mode nothing else and with commands I can only use fastboot commands ofcoz and not adb commands coz my device is not in debug mode .
Same problem here
i get remote:command not allowed every time i want to use "fastboot flash boot boot.img"
Anyway to fix it ?
Unlock the bootloader again guys
please help me i hase emui 4..1
and i install twrp 4.1 and when i install nougat i install
supersu_v2.79_sr2 then
update_2 but when istall update it stop on writinh ratio i shut dun the phone but no login to twrp or to stock recovery
help me plaese
i flashed twrp from SRKTool the phone bootloop and i canot poweroff please help me
i was on 4.1 and i was unlock bootloader and twrp and i was insall nougat l29c185b560 wich have 3 files
supersu_v2.79_sr2 ----update_2------update_data_full_hw_meafnaf
when i flash update.zip in twrp it stop install on ratio i sutdown the phone and now the phone
is bootloop and not shutdown i try flash many recovery same problem my phone
is l29c185b--
https://forum.xda-developers.com/mat...icial-t3556789
I canot power off my phone but when I waited until the battery was discharged but the phone restart alone
I use method two by flash .img cust complet recovery complet boot complet but when flash system.img faild the rom exracted is l29c185b320
I try flash boot cust boot and system from nougat it complet but the problem same I canot dload I canot boot to recovery for wipe and the phone stay restart
please any help when I was flash nought it not complet it stop on writing ratio so I power off phone then the problem haben
boot loop any help my phone !!!!
XD
Omg thank you so much id give you money if i had any!
Bootloop
My phone is not unlocked but i have managed to bootloop it when I tried to downgrade it using update.app but now when i try to use the update.app method it gets to 5% and then displays update failed.
When trying to run any of the fastboot methods you mentioned I cannot run it cause it displays "failed (remote: command not allowed)"
I do not have the bootloader unlock code as huawei is being retarded and do not provide that sevice no more can anyone help??
its a Huawei P8 Lite(the old one) ALE-L21 and came with C02 firmware.
My Imei:863323035412487 S/N QLF7N16B17004301
Any help would be appreciated

VNS-L21 TIFU - wrote wrong cust.bin and oeminfo - what to do?

So... I tried to get the P9 lite to custom Nougat ROM.
Unlocked bootloader using SRKtool (found here ) and flashed TWRP using the same tool.
Installed SuperSU. Made TWRP backup of all partitions (including cust and oeminfo).
The post suggested that stock Nougat ROM should be installed first, and then the custom ROM. But my model was different than the generic EU, so I thought I should update it, right?
Without much thinking I used the SRKtool again to flash oeminfo/custom.bin, and didn't even make backup of the files
Now my phone thinks it is hi6250 VNS-C432B140.
After boot message "Your device has failed verification and may not work properly." was displayed and boot was interrupted with "Type your password to decrypt storage" prompt. After formatting data partition system boots.
I can't boot into TWRP recovery.
I can't flash any partition with fastboot (Error: FAILED (remote: Command not allowed)).
Any ideas how to get oeminfo back to VNS-L21 and/or restore TWRP backups?

huawei p10 lite

any one help me my phone cant inter to twrp (remote: partition length get error) ) or erecovery and cant update with dload sdcard and cant flash it with fastboot and stay at dead screan and reboot
plz help me
The 1st thing you will need to do on any locked device is to unlock the Bootloader before you continue.
To unlock Bootloader you will need to use any of the Huawei paid services in order to do so.
Several are available for that and will need to check for that online.
now i unlocked my dvice and
i flhashed it with this method after they dead
and i flash twrp
and i flash oeminfo-p10lite-Emui 8 C432.rar with twrp
and now i download th full ota firmware but still cant flash it whith hwota method thay tell me chen they copied the updat fille that have no more space can you halp me plz
Try different Firmware. Sometimes there is a problem with that. Try to search for others that are good as well.

Categories

Resources