Database Users

Problem with new kernal

hi
is there anyone whocan help in in installing the rom with kenal 2.6.35
i tried few roms like aurora 4.03 and miui (2.6.35) but everytime i get the problem of .... NO NETWORK AND BATTERY STATUS NOT SHOWING
i used clockworkmod 5.5.0.4 for factory reset, cleared cache, cleared dalvikcache but results, every time the same problem persists, kindly help in installing arom with 2.6.35 kernal
thanks in advance

chochweet said:
hi
is there anyone whocan help in in installing the rom with kenal 2.6.35
i tried few roms like aurora 4.03 and miui (2.6.35) but everytime i get the problem of .... NO NETWORK AND BATTERY STATUS NOT SHOWING
i used clockworkmod 5.5.0.4 for factory reset, cleared cache, cleared dalvikcache but results, every time the same problem persists, kindly help in installing arom with 2.6.35 kernal
thanks in advance
Click to expand...
Click to collapse
sounds like you tired to install over a froyo rom/kernel, did you upgrade to 2.3 official before installing the .35 recovery and rom?

Edward Stanbury said:
sounds like you tired to install over a froyo rom/kernel, did you upgrade to 2.3 official before installing the .35 recovery and rom?
Click to expand...
Click to collapse
hi
i am using miui from the last few months now, i installed cyanagen , all these roms are based on 2.3 and at present i am using miui_u8800_2.2.24 andi tried to install rom from this rom only, i dont use froyo, but still the problem persists,
can u help

You need to install OFFICIAL 2.3.5 if you want to use .35 kernel ROMs (new CM7.2, Aurora, new MIUI...). It is not enough if you just install a custom 2.3 ROM beacuse older 2.3 ROMs use .32 kernel, so you need to update to official 2.3.5 which also changes some other files so you can use .35 kernel and from official you can go to .35 kernel custom ROMs.

now different prob
yannn007 said:
You need to install OFFICIAL 2.3.5 if you want to use .35 kernel ROMs (new CM7.2, Aurora, new MIUI...). It is not enough if you just install a custom 2.3 ROM beacuse older 2.3 ROMs use .32 kernel, so you need to update to official 2.3.5 which also changes some other files so you can use .35 kernel and from official you can go to .35 kernel custom ROMs.
Click to expand...
Click to collapse
hi
thanks for what u said but
i installed official 2.3.5 but now there is no imei and when i try to load into pink screen to change the recovery, it is not mounting, seems there r no files in it,
please help
and also when i revert back to 2.2 it shows files in boot screen in boot loader (pink Screen) and there i can change the latest recovery 5.5.0.4 but again the problem is back to .32, is there any way i can install only kernel to first change from .32 to .35 and then try to install a different rom (.35)
i would also like to add the official update i used was Android 2.3 V100R001C00B526G001 and now there is one more update Android 2.3 V100R001C00B528G001, currently i am downloading that, i will let u know what happens after i download that

chochweet said:
hi
thanks for what u said but
i installed official 2.3.5 but now there is no imei and when i try to load into pink screen to change the recovery, it is not mounting, seems there r no files in it,
please help
and also when i revert back to 2.2 it shows files in boot screen in boot loader (pink Screen) and there i can change the latest recovery 5.5.0.4 but again the problem is back to .32, is there any way i can install only kernel to first change from .32 to .35 and then try to install a different rom (.35)
i would also like to add the official update i used was Android 2.3 V100R001C00B526G001 and now there is one more update Android 2.3 V100R001C00B528G001, currently i am downloading that, i will let u know what happens after i download that
Click to expand...
Click to collapse
You can change recovery with root explorer. Here is a great guide: http://forum.xda-developers.com/showthread.php?t=1420728
Every ROM from beta2 on has locked bootloader so you cant change files when in pink screen but you can unlock it after you rooted it and changed recovery (search development forum for tutorial)

Problem solved
yannn007 said:
you can change recovery with root explorer. Here is a great guide: http://forum.xda-developers.com/showthread.php?t=1420728
every rom from beta2 on has locked bootloader so you cant change files when in pink screen but you can unlock it after you rooted it and changed recovery (search development forum for tutorial)
Click to expand...
Click to collapse
thanks alot, i changed the recovery after usig file expert and then installed aurora, now its working fine, thank god i had already taken my imei backup
thanks again

[Q] Confused with different Bobcat Roms?

Hi guys
I just have a few questions, sorry for being a total noob.
I have the following build JSS15J.N9500XXUBMJ1
I have already rooted by phone with Odin and backe up my stuff.
I want to flash the Bobcat Rom, but unsure which one to use since there is 2 and i am unsure which one to use
[SM-N9005][NOTE3][KitKat 4.4.2][XXUENB4]_BoBCaTROM_EVO_v6.0
[SM-N9005][NOTE3][XXUDMK2]_BoBCaTROM_EVO_v3.0
which is the right one or will either one work, but has different features.
Flash Stock firmware with Odin
==> INSTRUCTIONS TO FLASH 4.2.2 OFFICIAL FIRMWARE <==
4. Flash CWM Recovery kitkat compatible (Thx @Chenglu ==> http://forum.xda-developers.com/show....php?t=2454079)
will the bootloader be upgraded to 4.4?
is it possible to leave the bootloader update?
if so, can i still install the bobcat rom on the stock bootloader?
5. Boot to recovery, and Install BoBCaTROM with Full Wipe
Is it necessary to full wipe the note 3 when installing the bobcat rom?
Thnaks guys and i hope you guys can answer my silly question

Stevie G said:
Hi guys
I just have a few questions, sorry for being a total noob.
I have the following build JSS15J.N9500XXUBMJ1
I have already rooted by phone with Odin and backe up my stuff.
I want to flash the Bobcat Rom, but unsure which one to use since there is 2 and i am unsure which one to use
[SM-N9005][NOTE3][KitKat 4.4.2][XXUENB4]_BoBCaTROM_EVO_v6.0
[SM-N9005][NOTE3][XXUDMK2]_BoBCaTROM_EVO_v3.0
which is the right one or will either one work, but has different features.
Flash Stock firmware with Odin
==> INSTRUCTIONS TO FLASH 4.2.2 OFFICIAL FIRMWARE <==
4. Flash CWM Recovery kitkat compatible (Thx @Chenglu ==> http://forum.xda-developers.com/show....php?t=2454079)
will the bootloader be upgraded to 4.4?
is it possible to leave the bootloader update?
if so, can i still install the bobcat rom on the stock bootloader?
5. Boot to recovery, and Install BoBCaTROM with Full Wipe
Is it necessary to full wipe the note 3 when installing the bobcat rom?
Thnaks guys and i hope you guys can answer my silly question
Click to expand...
Click to collapse
MJ1 means 4.3. Flash v3.0. V4 and above are for 4.4.2 bootloader only.
Clean install is advised to avoid any issue later.

Rosli59564 said:
MJ1 means 4.3. Flash v3.0. V4 and above are for 4.4.2 bootloader only.
Clean install is advised to avoid any issue later.
Click to expand...
Click to collapse
thank you for assisting me, but which CWM version should i use. i already rooted the note with CWM v6.0.4.4 (20131011) by Xiaolu
Can i use this one currently on my phone or do i need a later version
Root your device and install a custom recovery... IMPORTANT! flash procedure tested only with latest CWM made by Chenglu.

Stevie G said:
thank you for assisting me, but which CWM version should i use. i already rooted the note with CWM v6.0.4.4 (20131011) by Xiaolu
Can i use this one currently on my phone or do i need a later version
Root your device and install a custom recovery... IMPORTANT! flash procedure tested only with latest CWM made by Chenglu.
Click to expand...
Click to collapse
6.0.4.4 is fine. I was on twrp when flashed this rom last time, no problem as well

Rosli59564 said:
6.0.4.4 is fine. I was on twrp when flashed this rom last time, no problem as well
Click to expand...
Click to collapse
Thank you
One last question.
Is Xposed framework and active modules build into the bobcat rom?
Also the same with Wanamaker Xposed?
I also notice that I can flash my own theme in recovery with stock or universal if I am correct.
Does the battery icon have to be done separately.
- Install Xposed framework and active modules (BoBCaTROM Control)
- Choose your Advanced settings by Wanam Xposed

Stevie G said:
Thank you
One last question.
Is Xposed framework and active modules build into the bobcat rom?
Also the same with Wanamaker Xposed?
I also notice that I can flash my own theme in recovery with stock or universal if I am correct.
Does the battery icon have to be done separately.
- Install Xposed framework and active modules (BoBCaTROM Control)
- Choose your Advanced settings by Wanam Xposed
Click to expand...
Click to collapse
Xposed framework provided but can't remember what modules included. You can however download modules from the framework itself.
You can choose whether to install stock samsung theme or bobcat theme.
Og battery mode included with >70 styles

[Q] can i downgrade to stock kk after flashing a rom ?

Hello guys,
I got the fota of lollipop for my d802 and it's awful so i thought about flashing a custom one.
to flash a custom rom all i have to do is to root and install recovery and then flash from recovery ?
if i would like to downgrade to stock kk , can i do it ?
thank you so much.
btw, can you recommend on a stable rom ?

pelegyair said:
Hello guys,
I got the fota of lollipop for my d802 and it's awful so i thought about flashing a custom one.
to flash a custom rom all i have to do is to root and install recovery and then flash from recovery ?
if i would like to downgrade to stock kk , can i do it ?
thank you so much.
btw, can you recommend on a stable rom ?
Click to expand...
Click to collapse
Hi!
First, to root and install custom recovery, use Autorec (LINK) : thread also has a link for ioroot25, which let you root your phone (ONLY ON KITKAT). When you have used autorec, be sure to flash latest version of TWRP (link in my signature).
If you want to go back to Kitkat, yes you can;
-By .kdz method (LINK);
-Or by flashing a .kdz file converts to .zip file (LINK : this one will let you keep custom recovery + root).
The thing you have to be advise is that when you switch between ROMS, you sometimes have to flash Baseband / bootloader / bootstack stuff like this. But this is every times describs in ROM's thread.
For stable stock ROM? I recommand you Cloudy 2.2 (kitkat ROM, see my signature for link) which is a port of the G3, add Dorimanx Kernel (see my signature) and you'll have a beast.
Also, all depends of your G2's model, there is planty of ROM for each model... I'll let you search !

casual_kikoo said:
Hi!
First, to root and install custom recovery, use Autorec (LINK) : thread also has a link for ioroot25, which let you root your phone (ONLY ON KITKAT). When you have used autorec, be sure to flash latest version of TWRP (link in my signature).
If you want to go back to Kitkat, yes you can;
-By .kdz method (LINK);
-Or by flashing a .kdz file converts to .zip file (LINK : this one will let you keep custom recovery + root).
The thing you have to be advise is that when you switch between ROMS, you sometimes have to flash Baseband / bootloader / bootstack stuff like this. But this is every times describs in ROM's thread.
For stable stock ROM? I recommand you Cloudy 2.2 (kitkat ROM, see my signature for link) which is a port of the G3, add Dorimanx Kernel (see my signature) and you'll have a beast.
Also, all depends of your G2's model, there is planty of ROM for each model... I'll let you search !
Click to expand...
Click to collapse
thank you for your quick answer! i got a d802.
as i now have stock lollipop, what do i need to do in order to flash cloudy 2.2 ? downgrade or something ?
can i update later from cloudy 2.2 to 3.0 ?
again, thank you.

pelegyair said:
thank you for your quick answer! i got a d802.
as i now have stock lollipop, what do i need to do in order to flash cloudy 2.2 ? downgrade or something ?
can i update later from cloudy 2.2 to 3.0 ?
again, thank you.
Click to expand...
Click to collapse
Root your device (I let you search for root on Lollipop);
Use Autorec to downgrade your Bootloader;
FLASH LATEST VERSION OF TWRP;
Flash Kitkat baseband provides in CloudyG2 2.2 and then the ROM.
For now, CloudyG2 3.0 isn't officially supported on D802 by @Cloudyfa, but (very) soon he'll release CloudyG2 2.3 which is G4's port, so, wait for it.

casual_kikoo said:
Root your device (I let you search for root on Lollipop);
Use Autorec to downgrade your Bootloader;
FLASH LATEST VERSION OF TWRP;
Flash Kitkat baseband provides in CloudyG2 2.2 and then the ROM.
For now, CloudyG2 3.0 isn't officially supported on D802 by @Cloudyfa, but (very) soon he'll release CloudyG2 2.3 which is G4's port, so, wait for it.
Click to expand...
Click to collapse
ok, thanks.
what about paranoaid android ? i couldn't figured out what's going out with it
is the last version is lollipop? do you think it's stable enough ?

Installing Cloudy G2 3.0 on Stock Lollipop

Dear All,
I have raised my query in ROM and ROMs Q&A thread, but it was not answered and i was eagerly waiting to flash this ROM..
I have LG G2 F320k and I am running stock lollipop, and i have managed to root it and then I installed TWRP recovery by installing F320_lp.apk and then i have made nandroid backup.. now i dont know the version of twrp installed and secondly the nandroid backup is not showing up in my SD card
My important question is,, can i install cloudy 3.0 in this situation, as i am on lollipop or should i install any JB or kitkat bootloader.. please guide me so that i can get rid of korean apps and enjoy the features of Cloudy,. Thanks

LG G2 LS980 : Android 5.0.2 (Lollipop) to Android 6.1 (Marshmallow) HELP

Okay so I have a question. I am currently running CM12.1 on my LG G2 LS980 android version 5.0.2, I have Gapps installed already and CM21.1 installed and TWRP.
My question is, is there anyway I can update to my LG G2 to Android MARSHMALLOW (6 - 6.1) using CM13 or anyother way?
I'm not a noob but I also want to know if I just download CM13 while using CM12.1 and boot into recovery and Flash CM13 if everything will run right or what I'll need to do, and if it is possible and I do get to MARSHMALLOW will I need to mess with my Xposed Framework or SuperSu? Please help.

Paentherax said:
Okay so I have a question. I am currently running CM12.1 on my LG G2 LS980 android version 5.0.2, I have Gapps installed already and CM21.1 installed and TWRP.
My question is, is there anyway I can update to my LG G2 to Android MARSHMALLOW (6 - 6.1) using CM13 or anyother way?
I'm not a noob but I also want to know if I just download CM13 while using CM12.1 and boot into recovery and Flash CM13 if everything will run right or what I'll need to do, and if it is possible and I do get to MARSHMALLOW will I need to mess with my Xposed Framework or SuperSu? Please help.
Click to expand...
Click to collapse
well you can do that.. but i rather like to wipe all partitions.. including sd card.. just move them from phone to pc while connected in twrp... thats just me.. you need to wipe syste/data/dalvik. so you must install xposed and i think some roms have Suerp Su..