[Q] Confused with different Bobcat Roms? - Galaxy Note 3 Q&A, Help & Troubleshooting

Hi guys
I just have a few questions, sorry for being a total noob.
I have the following build JSS15J.N9500XXUBMJ1
I have already rooted by phone with Odin and backe up my stuff.
I want to flash the Bobcat Rom, but unsure which one to use since there is 2 and i am unsure which one to use
[SM-N9005][NOTE3][KitKat 4.4.2][XXUENB4]_BoBCaTROM_EVO_v6.0
[SM-N9005][NOTE3][XXUDMK2]_BoBCaTROM_EVO_v3.0
which is the right one or will either one work, but has different features.
Flash Stock firmware with Odin
==> INSTRUCTIONS TO FLASH 4.2.2 OFFICIAL FIRMWARE <==
4. Flash CWM Recovery kitkat compatible (Thx @Chenglu ==> http://forum.xda-developers.com/show....php?t=2454079)
will the bootloader be upgraded to 4.4?
is it possible to leave the bootloader update?
if so, can i still install the bobcat rom on the stock bootloader?
5. Boot to recovery, and Install BoBCaTROM with Full Wipe
Is it necessary to full wipe the note 3 when installing the bobcat rom?
Thnaks guys and i hope you guys can answer my silly question

Stevie G said:
Hi guys
I just have a few questions, sorry for being a total noob.
I have the following build JSS15J.N9500XXUBMJ1
I have already rooted by phone with Odin and backe up my stuff.
I want to flash the Bobcat Rom, but unsure which one to use since there is 2 and i am unsure which one to use
[SM-N9005][NOTE3][KitKat 4.4.2][XXUENB4]_BoBCaTROM_EVO_v6.0
[SM-N9005][NOTE3][XXUDMK2]_BoBCaTROM_EVO_v3.0
which is the right one or will either one work, but has different features.
Flash Stock firmware with Odin
==> INSTRUCTIONS TO FLASH 4.2.2 OFFICIAL FIRMWARE <==
4. Flash CWM Recovery kitkat compatible (Thx @Chenglu ==> http://forum.xda-developers.com/show....php?t=2454079)
will the bootloader be upgraded to 4.4?
is it possible to leave the bootloader update?
if so, can i still install the bobcat rom on the stock bootloader?
5. Boot to recovery, and Install BoBCaTROM with Full Wipe
Is it necessary to full wipe the note 3 when installing the bobcat rom?
Thnaks guys and i hope you guys can answer my silly question
Click to expand...
Click to collapse
MJ1 means 4.3. Flash v3.0. V4 and above are for 4.4.2 bootloader only.
Clean install is advised to avoid any issue later.

Rosli59564 said:
MJ1 means 4.3. Flash v3.0. V4 and above are for 4.4.2 bootloader only.
Clean install is advised to avoid any issue later.
Click to expand...
Click to collapse
thank you for assisting me, but which CWM version should i use. i already rooted the note with CWM v6.0.4.4 (20131011) by Xiaolu
Can i use this one currently on my phone or do i need a later version
Root your device and install a custom recovery... IMPORTANT! flash procedure tested only with latest CWM made by Chenglu.

Stevie G said:
thank you for assisting me, but which CWM version should i use. i already rooted the note with CWM v6.0.4.4 (20131011) by Xiaolu
Can i use this one currently on my phone or do i need a later version
Root your device and install a custom recovery... IMPORTANT! flash procedure tested only with latest CWM made by Chenglu.
Click to expand...
Click to collapse
6.0.4.4 is fine. I was on twrp when flashed this rom last time, no problem as well

Rosli59564 said:
6.0.4.4 is fine. I was on twrp when flashed this rom last time, no problem as well
Click to expand...
Click to collapse
Thank you
One last question.
Is Xposed framework and active modules build into the bobcat rom?
Also the same with Wanamaker Xposed?
I also notice that I can flash my own theme in recovery with stock or universal if I am correct.
Does the battery icon have to be done separately.
- Install Xposed framework and active modules (BoBCaTROM Control)
- Choose your Advanced settings by Wanam Xposed

Stevie G said:
Thank you
One last question.
Is Xposed framework and active modules build into the bobcat rom?
Also the same with Wanamaker Xposed?
I also notice that I can flash my own theme in recovery with stock or universal if I am correct.
Does the battery icon have to be done separately.
- Install Xposed framework and active modules (BoBCaTROM Control)
- Choose your Advanced settings by Wanam Xposed
Click to expand...
Click to collapse
Xposed framework provided but can't remember what modules included. You can however download modules from the framework itself.
You can choose whether to install stock samsung theme or bobcat theme.
Og battery mode included with >70 styles

Related

Upgrade to TW 4.3

Hello to all,
i'm on omega v12, adam kernel and philipz recovery and i'm on know warranty 0x1!!!!
Now i want to make my phone clear of all, install official 4.3, make root and install again a custom recovery.
It's possibile? How can i do that?
I have read about incoming v13 of omega but i read also about stock browser problem and some apps are removed. I only need root, custom recovery and init.d support.
How can i do that?
Thanks
Anyone can help me guys?
mattiadj said:
Hello to all,
i'm on omega v12, adam kernel and philipz recovery and i'm on know warranty 0x1!!!!
Now i want to make my phone clear of all, install official 4.3, make root and install again a custom recovery.
It's possibile? How can i do that?
I have read about incoming v13 of omega but i read also about stock browser problem and some apps are removed. I only need root, custom recovery and init.d support.
How can i do that?
Thanks
Click to expand...
Click to collapse
Did you sort this??
If not....As you have already triggered KNOX at 0x1 you can install official 4.3 via odin.........install custom recovery (Philz I would recomend) via odin.....and then flash Omega v13 without the modems!

is it possible to flash rom directly from CWM on my 910C ?

Hello
Can i download zip rom from my note 4 and flash it on cwm without using pc ?
Also can anyone one recommend a good rom for 910c that look as same as stock lollipop? ?
All I need to do is to install xposed. . Stock rom send u to bootloop if u install xposed
Please help guys
I don't know wether xposed framework already updated or not, but they haven't support samsung touchwiz lolipop rom, so any custom rom that based on touchwiz can't use xposed yet.

[Q] can i downgrade to stock kk after flashing a rom ?

Hello guys,
I got the fota of lollipop for my d802 and it's awful so i thought about flashing a custom one.
to flash a custom rom all i have to do is to root and install recovery and then flash from recovery ?
if i would like to downgrade to stock kk , can i do it ?
thank you so much.
btw, can you recommend on a stable rom ?
pelegyair said:
Hello guys,
I got the fota of lollipop for my d802 and it's awful so i thought about flashing a custom one.
to flash a custom rom all i have to do is to root and install recovery and then flash from recovery ?
if i would like to downgrade to stock kk , can i do it ?
thank you so much.
btw, can you recommend on a stable rom ?
Click to expand...
Click to collapse
Hi!
First, to root and install custom recovery, use Autorec (LINK) : thread also has a link for ioroot25, which let you root your phone (ONLY ON KITKAT). When you have used autorec, be sure to flash latest version of TWRP (link in my signature).
If you want to go back to Kitkat, yes you can;
-By .kdz method (LINK);
-Or by flashing a .kdz file converts to .zip file (LINK : this one will let you keep custom recovery + root).
The thing you have to be advise is that when you switch between ROMS, you sometimes have to flash Baseband / bootloader / bootstack stuff like this. But this is every times describs in ROM's thread.
For stable stock ROM? I recommand you Cloudy 2.2 (kitkat ROM, see my signature for link) which is a port of the G3, add Dorimanx Kernel (see my signature) and you'll have a beast.
Also, all depends of your G2's model, there is planty of ROM for each model... I'll let you search !
casual_kikoo said:
Hi!
First, to root and install custom recovery, use Autorec (LINK) : thread also has a link for ioroot25, which let you root your phone (ONLY ON KITKAT). When you have used autorec, be sure to flash latest version of TWRP (link in my signature).
If you want to go back to Kitkat, yes you can;
-By .kdz method (LINK);
-Or by flashing a .kdz file converts to .zip file (LINK : this one will let you keep custom recovery + root).
The thing you have to be advise is that when you switch between ROMS, you sometimes have to flash Baseband / bootloader / bootstack stuff like this. But this is every times describs in ROM's thread.
For stable stock ROM? I recommand you Cloudy 2.2 (kitkat ROM, see my signature for link) which is a port of the G3, add Dorimanx Kernel (see my signature) and you'll have a beast.
Also, all depends of your G2's model, there is planty of ROM for each model... I'll let you search !
Click to expand...
Click to collapse
thank you for your quick answer! i got a d802.
as i now have stock lollipop, what do i need to do in order to flash cloudy 2.2 ? downgrade or something ?
can i update later from cloudy 2.2 to 3.0 ?
again, thank you.
pelegyair said:
thank you for your quick answer! i got a d802.
as i now have stock lollipop, what do i need to do in order to flash cloudy 2.2 ? downgrade or something ?
can i update later from cloudy 2.2 to 3.0 ?
again, thank you.
Click to expand...
Click to collapse
Root your device (I let you search for root on Lollipop);
Use Autorec to downgrade your Bootloader;
FLASH LATEST VERSION OF TWRP;
Flash Kitkat baseband provides in CloudyG2 2.2 and then the ROM.
For now, CloudyG2 3.0 isn't officially supported on D802 by @Cloudyfa, but (very) soon he'll release CloudyG2 2.3 which is G4's port, so, wait for it.
casual_kikoo said:
Root your device (I let you search for root on Lollipop);
Use Autorec to downgrade your Bootloader;
FLASH LATEST VERSION OF TWRP;
Flash Kitkat baseband provides in CloudyG2 2.2 and then the ROM.
For now, CloudyG2 3.0 isn't officially supported on D802 by @Cloudyfa, but (very) soon he'll release CloudyG2 2.3 which is G4's port, so, wait for it.
Click to expand...
Click to collapse
ok, thanks.
what about paranoaid android ? i couldn't figured out what's going out with it
is the last version is lollipop? do you think it's stable enough ?

First custom ROM

Hello!
I have a GT-I9505 (jfltexx) with android 5.0.1 (stock rom) and I would like to flash my first custom ROM - specifically CM 11. Do I have to downgrade to KitKat first (via Odin?) or can I just root, install TWRP and flash it from Lollipop?
Thanks in advance for any help you are able to provide.
Lukexr said:
Hello!
I have a GT-I9505 (jfltexx) with android 5.0.1 (stock rom) and I would like to flash my first custom ROM - specifically CM 11. Do I have to downgrade to KitKat first (via Odin?) or can I just root, install TWRP and flash it from Lollipop?
Thanks in advance for any help you are able to provide.
Click to expand...
Click to collapse
Only thing you need to do:
- Flash TWRP
- Flash the custom rom you want.
ps do not use outdated custom roms like CM 11. Always use the latest custom roms available. Thus CM 12.1.

i9515 - best ROM?

Hello,
so at this moment i got stock 5.0.1 rooted but i get crashes sometimes [cuz of towelroot i think] so i want to get something more stable.
Question is : can i install ROM's for i9505 ?
I got one requirement - Viper4Android must work
I found this ROM's interresing will they work on my phone? :
http://forum.xda-developers.com/galaxy-s4/i9505-develop/rom-super-wizcyan-29-nov-15-t3259562
http://forum.xda-developers.com/galaxy-s4/i9505-develop/rom-crdroid-t3017844
http://forum.xda-developers.com/galaxy-s4/i9505-develop/rom-resurrection-lollipop-v5-5-5-t3195202
I think you need a special kernel for the I9505 roms to work on the I9515.
You can find more info here.
I would be careful.
You could also flash back to stock, flash TWRP, and install supersu from TWRP.

Categories

Resources