Hi guys
I just have a few questions, sorry for being a total noob.
I have the following build JSS15J.N9500XXUBMJ1
I have already rooted by phone with Odin and backe up my stuff.
I want to flash the Bobcat Rom, but unsure which one to use since there is 2 and i am unsure which one to use
[SM-N9005][NOTE3][KitKat 4.4.2][XXUENB4]_BoBCaTROM_EVO_v6.0
[SM-N9005][NOTE3][XXUDMK2]_BoBCaTROM_EVO_v3.0
which is the right one or will either one work, but has different features.
Flash Stock firmware with Odin
==> INSTRUCTIONS TO FLASH 4.2.2 OFFICIAL FIRMWARE <==
4. Flash CWM Recovery kitkat compatible (Thx @Chenglu ==> http://forum.xda-developers.com/show....php?t=2454079)
will the bootloader be upgraded to 4.4?
is it possible to leave the bootloader update?
if so, can i still install the bobcat rom on the stock bootloader?
5. Boot to recovery, and Install BoBCaTROM with Full Wipe
Is it necessary to full wipe the note 3 when installing the bobcat rom?
Thnaks guys and i hope you guys can answer my silly question
Stevie G said:
Hi guys
I just have a few questions, sorry for being a total noob.
I have the following build JSS15J.N9500XXUBMJ1
I have already rooted by phone with Odin and backe up my stuff.
I want to flash the Bobcat Rom, but unsure which one to use since there is 2 and i am unsure which one to use
[SM-N9005][NOTE3][KitKat 4.4.2][XXUENB4]_BoBCaTROM_EVO_v6.0
[SM-N9005][NOTE3][XXUDMK2]_BoBCaTROM_EVO_v3.0
which is the right one or will either one work, but has different features.
Flash Stock firmware with Odin
==> INSTRUCTIONS TO FLASH 4.2.2 OFFICIAL FIRMWARE <==
4. Flash CWM Recovery kitkat compatible (Thx @Chenglu ==> http://forum.xda-developers.com/show....php?t=2454079)
will the bootloader be upgraded to 4.4?
is it possible to leave the bootloader update?
if so, can i still install the bobcat rom on the stock bootloader?
5. Boot to recovery, and Install BoBCaTROM with Full Wipe
Is it necessary to full wipe the note 3 when installing the bobcat rom?
Thnaks guys and i hope you guys can answer my silly question
Click to expand...
Click to collapse
MJ1 means 4.3. Flash v3.0. V4 and above are for 4.4.2 bootloader only.
Clean install is advised to avoid any issue later.
Rosli59564 said:
MJ1 means 4.3. Flash v3.0. V4 and above are for 4.4.2 bootloader only.
Clean install is advised to avoid any issue later.
Click to expand...
Click to collapse
thank you for assisting me, but which CWM version should i use. i already rooted the note with CWM v6.0.4.4 (20131011) by Xiaolu
Can i use this one currently on my phone or do i need a later version
Root your device and install a custom recovery... IMPORTANT! flash procedure tested only with latest CWM made by Chenglu.
Stevie G said:
thank you for assisting me, but which CWM version should i use. i already rooted the note with CWM v6.0.4.4 (20131011) by Xiaolu
Can i use this one currently on my phone or do i need a later version
Root your device and install a custom recovery... IMPORTANT! flash procedure tested only with latest CWM made by Chenglu.
Click to expand...
Click to collapse
6.0.4.4 is fine. I was on twrp when flashed this rom last time, no problem as well
Rosli59564 said:
6.0.4.4 is fine. I was on twrp when flashed this rom last time, no problem as well
Click to expand...
Click to collapse
Thank you
One last question.
Is Xposed framework and active modules build into the bobcat rom?
Also the same with Wanamaker Xposed?
I also notice that I can flash my own theme in recovery with stock or universal if I am correct.
Does the battery icon have to be done separately.
- Install Xposed framework and active modules (BoBCaTROM Control)
- Choose your Advanced settings by Wanam Xposed
Stevie G said:
Thank you
One last question.
Is Xposed framework and active modules build into the bobcat rom?
Also the same with Wanamaker Xposed?
I also notice that I can flash my own theme in recovery with stock or universal if I am correct.
Does the battery icon have to be done separately.
- Install Xposed framework and active modules (BoBCaTROM Control)
- Choose your Advanced settings by Wanam Xposed
Click to expand...
Click to collapse
Xposed framework provided but can't remember what modules included. You can however download modules from the framework itself.
You can choose whether to install stock samsung theme or bobcat theme.
Og battery mode included with >70 styles
Hello i need some input and help
I bought a new galaxy s4 value edition gt-i9515
So cusom recovery root and roms work
Recovery and rom only without touch and radio
Used cwn and rom from 9505.
So i think its a kernel issue...
As the device came with kitkat and i,m migrated from mtk platform where its possible to create twrp touch with stock kernel my question is there anything similar cause cwn from 9505 works not well (after restore i had to full wipe cause everthing fc, s)
Also i know that i have to repack a kk kernel for every rom version slimkat cwm stock...
Or has this changed?
So my thoughts i take the stock kk kernel and repack it to work with slimkat and my touch problems have gone.
Please correct me if I'm wrong.
I have both kernel but no pc and don't know how to repack.
So is her someone who can help me out
The better solution would be to add support for i9515 to some custom kernel but quick and dirty repack would do.
Thanks alot
phil2sat
Hello
Can i download zip rom from my note 4 and flash it on cwm without using pc ?
Also can anyone one recommend a good rom for 910c that look as same as stock lollipop? ?
All I need to do is to install xposed. . Stock rom send u to bootloop if u install xposed
Please help guys
I don't know wether xposed framework already updated or not, but they haven't support samsung touchwiz lolipop rom, so any custom rom that based on touchwiz can't use xposed yet.
Hello!
I have a GT-I9505 (jfltexx) with android 5.0.1 (stock rom) and I would like to flash my first custom ROM - specifically CM 11. Do I have to downgrade to KitKat first (via Odin?) or can I just root, install TWRP and flash it from Lollipop?
Thanks in advance for any help you are able to provide.
Lukexr said:
Hello!
I have a GT-I9505 (jfltexx) with android 5.0.1 (stock rom) and I would like to flash my first custom ROM - specifically CM 11. Do I have to downgrade to KitKat first (via Odin?) or can I just root, install TWRP and flash it from Lollipop?
Thanks in advance for any help you are able to provide.
Click to expand...
Click to collapse
Only thing you need to do:
- Flash TWRP
- Flash the custom rom you want.
ps do not use outdated custom roms like CM 11. Always use the latest custom roms available. Thus CM 12.1.
Hello,
so at this moment i got stock 5.0.1 rooted but i get crashes sometimes [cuz of towelroot i think] so i want to get something more stable.
Question is : can i install ROM's for i9505 ?
I got one requirement - Viper4Android must work
I found this ROM's interresing will they work on my phone? :
http://forum.xda-developers.com/galaxy-s4/i9505-develop/rom-super-wizcyan-29-nov-15-t3259562
http://forum.xda-developers.com/galaxy-s4/i9505-develop/rom-crdroid-t3017844
http://forum.xda-developers.com/galaxy-s4/i9505-develop/rom-resurrection-lollipop-v5-5-5-t3195202
I think you need a special kernel for the I9505 roms to work on the I9515.
You can find more info here.
I would be careful.
You could also flash back to stock, flash TWRP, and install supersu from TWRP.