Hi All,
I have following setting:
JB Bootloader
KK Kernel (lokied)
TWRP Recovery (lokied)
KK Stock ROM (rooted)
I would like to upgrade to stock LP. But I'm not sure about which bootloader to pickup and which kernel.
Should I follow these steps?
Flash LP Bootloader (or KK Bootloader? )
Flash LP Stock Kernel (or bumped LP stock kernel ? )
Flash TWRP Recovery (bumped)
Flash LP Stock ROM
I'm not sure if LP Stock Kernel need to be bumped as well and if need to use KK Bootloader. Anybody knows?
Please do no reply with "simply flash this ROM ZIP from this thread", thank you.
I would like to know only answer to above questions then I can proceed by self with my own zip files.
Answer
Well, quite embarrassing.
I found my answer after posting this question. If anybody want to know, it is written here:
http://forum.xda-developers.com/showpost.php?p=59882657&postcount=2 by @6ril1 , thanks :good:
Q&A for [GUIDE] How to install CloudyG2 3.1 (D802) + MOD
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GUIDE] How to install CloudyG2 3.1 (D802) + MOD. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Soo...
I got a bit confused. If I come from the G4 Rom by Cheloz should I flash only the Cloudy rom or I need the debload patch too?
Thanks
taiki3ro said:
I got a bit confused. If I come from the G4 Rom by Cheloz should I flash only the Cloudy rom or I need the debload patch too?
Thanks
Click to expand...
Click to collapse
Debloat is MOD .Doesn't patch. You should flash rom only if doesn't want to use mod.
Sent from my LG-H818
Thanks a lot
I realized that i might need to reflash cloudy rom. You are the man, now its easy.
Thanks a dozen!
the patch did not work
i'm using d802 and I got bootloop when install cloudyG3 from Lollipop. Then I go back to kitkat then follow the instruction. However the bootloop is still here. I don't know what happen, maybe because I installed the D802T Auto Rec file?
sjeunhanz said:
i'm using d802 and I got bootloop when install cloudyG3 from Lollipop. Then I go back to kitkat then follow the instruction. However the bootloop is still here. I don't know what happen, maybe because I installed the D802T Auto Rec file?
Click to expand...
Click to collapse
Sure. I have to correctly install custom recovery that is my recommend. I comfirm 100% If you follow by my instruction it working
Sent from my LG-D802 using Tapatalk
I have kdz to 5.0 and download your twrp version and do exactly the instruction and it is still not working. I don't know where I missed
ohh crumbs.
I can't install cloudyg2 3.1 because my screen is broken. I can use a mouse with an otg cable to control TWRP but as soon as I begin installation it goes to a fancy ui that doesn't support my mouse pointer. If I click it only opens the 3 dot menu. Can't use hardware keys either. Gutted.
i am using optimus g3 kitKAt on d802
I CAN USE THIS METHOD TO INSTALL CLOUDY G2 3.1??
AND THE V2.8.5.1 OF TWRP IS OK??
PLZ HELP ME ??
Just to make sure - can I install your mod after using CloudyG2 for some days? Will it simple remove some apps?
Is the list of debloated apps similar to your own ROM? Just came from Kra-Pow-Moo-Sab but have to admit I prefer Cloudys ROM
Hai somboons,
In video, you use KITKAT.
My device is G2 16GB with lolipop 5.0.2. I update it via LG PC suite (not yet rooted)
If i want to install cloudy 3, what step should I do? Can I use in page 1?
In page one, I use "Coming from kitkat / Lollipop ASOP " or "Coming from Lollipop (Stock Custom ROM)"
sorry so many ask. I am newbie in this topic
Thanks in advence
Coming from CG2 2.2
Dear somboons,
Currently i'm using cloudyg2 2.2 in my G2, that i believe still Kitkat. Based on my understanding, even it's not aosp, i still can use your method (flash the patch) to upgrade to CG2 3.1, right?
LS980
i have a problem that i get a blank black screen on booting, do you have any suggestions?
Suggestions
I have install cloudyG2 3.1.
IMHO,
For next update, maybe the NAVIGATIONAL / NOTIFICATION BAR (upside) can make bigger. IMHO, it's too small
bar for HOME TOUCH BUTTON make bigger because it's too small to.
And the volume is so small. maybe you can make it louder for next update.
Can't wait for the next update
Thanks
---------- Post added at 09:59 AM ---------- Previous post was at 09:56 AM ----------
AguzBudiarta said:
i have a problem that i get a blank black screen on booting, do you have any suggestions?
Click to expand...
Click to collapse
I have that problem too. Maybe it is called bootlop CMIIW
I take the step http://forum.xda-developers.com/showthread.php?t=2687768 but your LG will back to 4.2.2 JB.
It's okay, more important, you can use your device again
Noobquestion:
Sorry i dont understand. I have official Lollipop Rom for LG G2. Do i have to use method 1 (Coming from kitkat / Lollipop ASOP) or method 2 (Coming from Lollipop (Stock Custom ROM) ) ?
JKDO said:
Sorry i dont understand. I have official Lollipop Rom for LG G2. Do i have to use method 1 (Coming from kitkat / Lollipop ASOP) or method 2 (Coming from Lollipop (Stock Custom ROM) ) ?
Click to expand...
Click to collapse
I'm from lollipop ROM official too..
use method 1 (kitkat / lollipop ASOP) but I suggest root with one-click root. My device can't be rooted with towelroot.
Help.
I tried using your method to install CloudyG2 v3.1 coming from CloudyG2 v2.2 (KITKAT).
Yes, I'm on D802 - International Version currently.
Problem I'm facing: I followed your exact step-by-step tutorial in your first post.
After a successful rom install, I click reboot into system but after a few seconds the LED flashes with the LG logo then it goes blank and the LG logo re-appears and I get booted into TWRP again.
I went back to KitKat with my nandroid backup in TWRP which I had luckily made.
What I exactly did:
[Please note I was on TWRP v2.8.5.1 before flashing the TWRP bump.]
1. Flashed the TWRP Bump (GO TO LP V1.1 droidth.zip)
2. Rebooted into recovery.
3. Wipe - Dalvik Cache, Cache, Data, System.
4. Flashed CloudyG3v3.1.zip
5. Rebooted system.
Then, I get rebooted into TWRP after a few seconds.
I hope you can help me as soon as possible, somboons.
Regards,
SpaceXTheClockMaster.
Stuck at loading Screen
Hi Somboons, I have a stock rooted kitkat and follow your steps in the post. But unfortunately it got stuck at the loading screen. Is there any other alternatives? Thanks
Zip error occur
Hi guys. i have followed steps but when flashing rom in twrp, an error message has shown that E:zip file error occur. What can i do? i couldnt figure out to solve problem
done every thing but it go to fastboot mood and don't want to reboot
i done every thing in the how to install cloudyg2 3.1 to step 4. but now every thing is gone the phone went dark and its go to Fastboot mode. how can i deal with this issue
Hi, im know this is a noob question. I searched forum and many pl have booting issues or even bricked one.
Please clarify
EDIT: Maybe MODERATOR could do some sticky thread about this and jumping beetween roms? It would be helpfull, thanks.
Phone: 802
ROM: now Stock based 5.0.2 SRKG 2 3-0.0, day before official CM 12.1 build x.1021
TWRP 2.8.6.1
I want to go back to install 4.4.x, MIUI or Cloudy 2.2. I downloaded D802 PATCH DROIDTH RETURN 4.4 as sugested by many of you - so i need only to go to TWRP, flash this, reboot to recovery, flash 4.4.x Cloudy and that's it? How to recognize on whitch bootloader I sit on?
Please help me, i don't recognize difference beetween KK and LP bootloader's, bootstacks etc.
hello,
first that my device:
Model: lg g2 d802
Android version: 5.0.2 (cloudyG2 3.3)
baseband version: M8974A-AAAANAZM-1.0.190128 (KK_Baseband_D802 )
Kernal version: 3.4.0 (the cloudy's kernal)
software version: cloudyG2 3.3
_____________________________________________________________________________________________________________________________________
Things that i flashed:
bootloder: KK-20H-D802-BOOT-LOADER
pach cloudyG2 3.3 for G2 d802: D802_PATCH_GO_LP_V1.1_droidth (before i flash the rom)
Dorimanx that i tried to flash: Kernel-Dorimanx-V8.4-LP-[18-38]-[06-01]-LG-D802-PWR-CORE.zip
recovery: twrp-2.8.7.3-d802-bump-blastagator-signed
_____________________________________________________________________________________________________________________________________
i upgrade my lg to lolipop from kk and when i flashed the Dorimanx 8.4 LP kernal after flash rom (CLOUDYG2 3.3) the lg enter to bootloop , i fixed the bootloder and fastmode and then flash kdz rom and then the cloudy from the begining.
now the phone work but the battery worst and the phone work slowly.
1. What better: the cloudy or cyanogenmod? (or another rom ) cyanogenmod have an ir remote support ? when stble cloudy/cyanogenmod marshmellow out?
2. Flash another baseband? ( 30f? and where can i found this file with md5 code?)
3. which bootloder flash? use bootloder chenger? If i use bootloder chenger that flash baseband? which mod should i need to use ? (lolipop one?)
4. which recovery flash? whith version?
5. gps wasn't worl well, i installed the FasterGPS app and that improve but still it is slow. should i need to open the battary case or there is another way ?
thenks so so much!
If you were on LP cloudy g2 3.3 all you need was flash dorimanx 8.8 kernel. and it shouldnt have boot looped.
cloudy is stable . if CM then go qith 5.1.1 more stable than MM 6.0
best performance. but picture and camera not same quality as stock. as for ir remote yes theres one i ve seen.
you can try . roms all stock based.
icex
powerg2
google edition
for 30f look in d802 section. i think power g2 is 30f
use hybrid bootstacks.
use blastagator thermal twrp 2.8.7.3
raptorddd said:
If you were on LP cloudy g2 3.3 all you need was flash dorimanx 8.8 kernel. and it shouldnt have boot looped.
cloudy is stable . if CM then go qith 5.1.1 more stable than MM 6.0
best performance. but picture and camera not same quality as stock. as for ir remote yes theres one i ve seen.
you can try . roms all stock based.
icex
powerg2
google edition
for 30f look in d802 section. i think power g2 is 30f
use hybrid bootstacks.
use blastagator thermal twrp 2.8.7.3
Click to expand...
Click to collapse
so i need to flash?
1.twrp-2.8.7.3-d802-bump-blastagator-signed.zip
2.LP-BaseBand-30f_droidth.zip (where i found md5 code?)
3.BLChanger-d802_5_6-nevax-2.3.2-signed.zip (choose lp , it's flash baseband too?)
https:/ /docs.google .com/spreadsheets/d/1hA-PQuAz8EBNQy38hfGzRJEG2c_QckK9SliYsUZGkgY/edit#gid=0 (copy link and delete the aspace betwin / to / after the http and the apace after the google)
4.D802_PATCH_GO_LP_V1.1_droidth.zip
5.CloudyG2_3.3.zip
6.Kernel-Dorimanx-V8.8-LP-[18-00]-[24-01]-LG-D802-PWR-CORE.zip
You before the stock KitKat flash (I suggest 20C) after cloudyg2 flashed the ROM.
mraliaras said:
You before the stock KitKat flash (I suggest 20C) after cloudyg2 flashed the ROM.
Click to expand...
Click to collapse
The cloudyg2 3.3 is a lolipop rom, which baseband and bootloder i need to flash and if the flash files order that i wrote is correct?
Way 20C ?
YuvalHas said:
so i need to flash?
1.twrp-2.8.7.3-d802-bump-blastagator-signed.zip
2.LP-BaseBand-30f_droidth.zip (where i found md5 code?)
3.BLChanger-d802_5_6-nevax-2.3.2-signed.zip (choose lp , it's flash baseband too?)
https:/ /docs.google .com/spreadsheets/d/1hA-PQuAz8EBNQy38hfGzRJEG2c_QckK9SliYsUZGkgY/edit#gid=0 (copy link and delete the aspace betwin / to / after the http and the apace after the google)
4.D802_PATCH_GO_LP_V1.1_droidth.zip
5.CloudyG2_3.3.zip
6.Kernel-Dorimanx-V8.8-LP-[18-00]-[24-01]-LG-D802-PWR-CORE.zip
Click to expand...
Click to collapse
1.yes
2 /3 and 4 i dont know i have d800
if i understand ok. you were on stock LP. all you needed was twrp from blastagator this helps keep phone cool and prevent screen damage. ti has thermal to control cores. all you needed was hybrid bootstacks and the falsh rom.
i dont know the rest of things you flashed.
i think you just need to wipw all data/cache/dalvik and internal sd. then flash hybrid bootstacks. go to main menu/reboot into recovery. then flash rom. thats it. that is if you are in stock LP
flash it?
if i flash hybrid bootstacks i need to flash bootloder too (lp bootloder with bootloder chenger)? or that in the hybrid bootstacks
hybrid bootstacks:
-Aboot (KK)
-Dbi (LP)
-Laf (LP) (BUMP)
-Modem (LP)
-Persist (LP) (Except LS980)
-Rpm (LP)
-Sbl1 (LP)
-tz (LP)
1.twrp-2.8.7.3-d802-bump-blastagator-signed.zip (bump it?)
2.flash hybrid bootstack
3.BLChanger-d802_5_6-nevax-2.3.2-signed.zip (choose lp )
https:/ /docs.google .com/spreadsheets/d/1hA-PQuAz8EBNQy38hfGzRJEG2c_QckK9SliYsUZGkgY/edit#gid=0 (copy link and delete the aspace betwin / to / after the http and the apace after the google)
4.D802_PATCH_GO_LP_V1.1_droidth.zip
5.CloudyG2_3.3.zip
6.Kernel-Dorimanx-V8.8-LP-[18-00]-[24-01]-LG-D802-PWR-CORE.zip
Hello! I recently fixed my G2 screen. So now I want to upgrade its ROM. It is still on Cloudy g2 2.2 ( KITKAT 4.4.2). I wanted to upgrade to any nougat build. My phone version is F320L(korean variant). Can someone help me? Thanks in advance!
albannotosska said:
Hello! I recently fixed my G2 screen. So now I want to upgrade its ROM. It is still on Cloudy g2 2.2 ( KITKAT 4.4.2). I wanted to upgrade to any nougat build. My phone version is F320L(korean variant). Can someone help me? Thanks in advance!
Click to expand...
Click to collapse
Nearly every rom-thread contains a how-to. Check the different threads right her.
I know. But because I am in kitkat I wanted to know if I need to flash official lollipop first
So I decided to flash CM14.1 from CM13.0 today.
Here what I'm doing:
from CM 13;
Full Wipe
Flash g2 bootstacks https://forum.xda-developers.com/lg-g2/development/boot-g2-hybrid-bootstacks-t3183219
Flash ROM http://www.kimcloud.kr/lg/LG G2/cm14.1/
Flash Gapps OpenGapps
Flash Kernel Lambda Infinito BETA 9 for the LG G2 (Nougat)
Wipe data and cache
Reboot to system & make other thing in setting (SDCard not working)
Reboot to TWRP
Flash POLYMORPH to make SDCard working
Reboot to System
Done.