Hello,
I used my HD2 with WP7 as my primary music device in my car. Since I updated the OS I am not able to charge the phone from the USB connector from my head unit. The icon shows the USB connection but no charge... Anyone run into this?
The bluetooth audio connects now without having to manual sync and authenticate. I hated that in 6.5 and used an aux cable instead of streaming audio.
Anyone? I'd like to charge from the head unit USB like I did with the HD2 if at all possible.
I2eaper said:
Anyone? I'd like to charge from the head unit USB like I did with the HD2 if at all possible.
Click to expand...
Click to collapse
Probably your head unit don't have enough current to charge HD2. I have the same problem with one USB port of my laptop.
It worked on 6.5... Strange!
Hello!
I recently installed a Kenwood KDC-BT768HD in my vehicle. This unit has USB 2.0 ports and is supposed to support Andoird Audio. When I plug my (or my wife's) HTC 10 into the Kenwood's USB ports, with the HTC USB cable, the HTC 10 will charge, but the Kenwood does not recognize that anything is plugged in to it, and the HTC 10 doesn't recognize that anything has been plugged into it either. The Kenwood just says "NO DEVICE" and If I go to the USB settings in the HTC 10, everything is greyed out, so there is no way to set the USB mode. The HTC 10 works fine when I plug it into my PC or USB OTG cable, and the Kenwood recognizes when other things are plugged into its USB ports. Bluetooth seems to work fine. I am running stock Andorid 7.0 with the latest updates from Verizon.
I had USB debugging on, but turning it off didn't fix the problem. I also went through all the USB modes in the Developler options, and turned off Developer options altogether, but neither of those fixed the problem. I tried a different third-party cable that works with my PC, but it doesn't work either.
Any suggestions?
Thanks!
jbhtexas said:
Hello!
I recently installed a Kenwood KDC-BT768HD in my vehicle. This unit has USB 2.0 ports and is supposed to support Andoird Audio. When I plug my (or my wife's) HTC 10 into the Kenwood's USB ports, with the HTC USB cable, the HTC 10 will charge, but the Kenwood does not recognize that anything is plugged in to it, and the HTC 10 doesn't recognize that anything has been plugged into it either. The Kenwood just says "NO DEVICE" and If I go to the USB settings in the HTC 10, everything is greyed out, so there is no way to set the USB mode. The HTC 10 works fine when I plug it into my PC or USB OTG cable, and the Kenwood recognizes when other things are plugged into its USB ports. Bluetooth seems to work fine. I am running stock Andorid 7.0 with the latest updates from Verizon.
I had USB debugging on, but turning it off didn't fix the problem. I also went through all the USB modes in the Developler options, and turned off Developer options altogether, but neither of those fixed the problem. I tried a different third-party cable that works with my PC, but it doesn't work either.
Any suggestions?
Thanks!
Click to expand...
Click to collapse
Do any other phones work with this method?
I remember my brothers Civic came with USB for audio, and you could let in a USB stick for example, but it would only charge the device when plugged in.
Could just be how the headset is?
andybones said:
Do any other phones work with this method?
I remember my brothers Civic came with USB for audio, and you could let in a USB stick for example, but it would only charge the device when plugged in.
Could just be how the headset is?
Click to expand...
Click to collapse
If you google around, various posters in various forums report that it works, some even with older HTC devices. I have never tried it before, because I never had a car stereo with a USB input prior to the Kenwood I installed.
jbhtexas said:
If you google around, various posters in various forums report that it works, some even with older HTC devices. I have never tried it before, because I never had a car stereo with a USB input prior to the Kenwood I installed.
Click to expand...
Click to collapse
When I had similar issues as you on my old Samsung phone and Kenwood deck, the problem was the USB cable I was using. It was not recognized by either one of the devices as a data cable. Actually the cable itself was fine for other uses but just wasn't playing nice with one or both of the devices. Have you tried with the oem cable that came with the phone itself?
In my opinion, if your Kenwood supports Android Auto and yet that feature doesn't pick up your phone with Android Auto app at all, then it's a sign that the cable you're using is not up to the task.
Tarima said:
When I had similar issues as you on my old Samsung phone and Kenwood deck, the problem was the USB cable I was using. It was not recognized by either one of the devices as a data cable. Actually the cable itself was fine for other uses but just wasn't playing nice with one or both of the devices. Have you tried with the oem cable that came with the phone itself?
In my opinion, if your Kenwood supports Android Auto and yet that feature doesn't pick up your phone with Android Auto app at all, then it's a sign that the cable you're using is not up to the task.
Click to expand...
Click to collapse
I am using the HTC cable that came with the phone, model DC M700 / DC 1605. I also tried a USB-C cable that I bought from Amazon, and it doesn't work either.
jbhtexas said:
Hello!
I recently installed a Kenwood KDC-BT768HD in my vehicle. This unit has USB 2.0 ports and is supposed to support Andoird Audio. When I plug my (or my wife's) HTC 10 into the Kenwood's USB ports, with the HTC USB cable, the HTC 10 will charge, but the Kenwood does not recognize that anything is plugged in to it, and the HTC 10 doesn't recognize that anything has been plugged into it either. The Kenwood just says "NO DEVICE" and If I go to the USB settings in the HTC 10, everything is greyed out, so there is no way to set the USB mode. The HTC 10 works fine when I plug it into my PC or USB OTG cable, and the Kenwood recognizes when other things are plugged into its USB ports. Bluetooth seems to work fine. I am running stock Andorid 7.0 with the latest updates from Verizon.
I had USB debugging on, but turning it off didn't fix the problem. I also went through all the USB modes in the Developler options, and turned off Developer options altogether, but neither of those fixed the problem. I tried a different third-party cable that works with my PC, but it doesn't work either.
Any suggestions?
Thanks!
Click to expand...
Click to collapse
I have a similar problem with a Pioneer and MirrorLink, it worked fine before Android 7. You should see if there is a required Kenwood app that needs to be installed, that's the only way I could get my 10 with Android 7 to be recognized by my stereo.
jbhtexas said:
I am using the HTC cable that came with the phone, model DC M700 / DC 1605. I also tried a USB-C cable that I bought from Amazon, and it doesn't work either.
Click to expand...
Click to collapse
Have you tried Android Auto to see if that works at least?
Tarima said:
Have you tried Android Auto to see if that works at least?
Click to expand...
Click to collapse
I tried Android Auto, but it doesn't work.
lightweaponx said:
I have a similar problem with a Pioneer and MirrorLink, it worked fine before Android 7. You should see if there is a required Kenwood app that needs to be installed, that's the only way I could get my 10 with Android 7 to be recognized by my stereo.
Click to expand...
Click to collapse
There is a Kenwood app that I have installed, but it says it supports Android 6...nothing about Android 7. When I run the app have have the phone plugged in, it doesn't recognize the Kenwood.
Upon plugging the Android phone into the Kenwood, the Kenwood is supposed to offer to download the app, but it doesn't, likely because it doesn't recognize that anything is plugged in.
jbhtexas said:
There is a Kenwood app that I have installed, but it says it supports Android 6...nothing about Android 7. When I run the app have have the phone plugged in, it doesn't recognize the Kenwood.
Upon plugging the Android phone into the Kenwood, the Kenwood is supposed to offer to download the app, but it doesn't, likely because it doesn't recognize that anything is plugged in.
Click to expand...
Click to collapse
I feel like this is a problem with 7.0, it would probably work on 6. Is there a firmware update for the stereo itself?
My phone wouldn't be recognized in my Audi either, tried everything, wife's iPhone car play worked fine.... very frustrating... So I would just use it to charge. Then one day it started working! So much better than the Audi MMI. No idea what changed to make it work. Maybe Google play services updated?
Sent from my HTC6545LVW using Tapatalk
lightweaponx said:
I feel like this is a problem with 7.0, it would probably work on 6. Is there a firmware update for the stereo itself?
Click to expand...
Click to collapse
The firmware in the Kenwood was quite out of date. I updated it, but unfortunately, it did not help the problem.
jbhtexas said:
The firmware in the Kenwood was quite out of date. I updated it, but unfortunately, it did not help the problem.
Click to expand...
Click to collapse
If the phone is rooted you could try loading up a 6.0 ROM and see if that works, if not you may have to bug HTC and Kenwood.
lightweaponx said:
If the phone is rooted you could try loading up a 6.0 ROM and see if that works, if not you may have to bug HTC and Kenwood.
Click to expand...
Click to collapse
I contacted Kenwood, and their response was that the phone is not on the USB compatibility list, and thus there is no guarantee that it will work. Their compatibility list is rather lame....
http://www.kenwood.com/cs/ce/aoa2/
jbhtexas said:
I contacted Kenwood, and their response was that the phone is not on the USB compatibility list, and thus there is no guarantee that it will work. Their compatibility list is rather lame....
http://www.kenwood.com/cs/ce/aoa2/
Click to expand...
Click to collapse
The only other thing you could do is hope HTC or Kenwood releases an update that fixes the problem or try an Android 6 ROM if the phone is rooted.
How is your bluetooth streaming? I have a Tmobile HTC 10 and have audio skipping issues with any of the newer Kenwood decks. It works perfectly with the BT515HD a 2014 model, I upgraded to the new KDC x701, skipping issues, switched to the top of the line KDc x998, another early 2014 model, streams perfectly but tags on apps like Pandora don't go through. Switched again to the new release of what I started with, BT518HD, bluetooth streaming skipping issues. I f you can stream perfectly, I'd like to try the firmware you are currently on.
Hi all,
I'm having an issue with my Joying 8.8" Android Unit. The unit supports Android Auto using the pre-installed "CarLink 2.0" app.
I usually use Wireless Android Auto and it works just fine. However, the head unit does not have any buttons, neither does the steering wheel (Audi TT mk1). To solve this, I have added a USB volume dial (Digispark ATtiny85 paired with a rotary encoder) which I have used on another car running a eonon unit with ZLink where it works very well.
The problem is that, everytime I connect the volume knob to this unit's usb, CarLink seems to think it is a mobile phone, so it interrupts my wireless android auto session and attempts to connect to the usb volume dial. When this happens, the volume dial stops working. This only happens when the CarLink app is running.
Thinking this is an issue with the CarLink App, I tried to install ZLink instead, but It won't run due to "channel error". Do I have to install it as a system app?
Another possible solution: Is there a way to disable USB for CarLink?
Thank You
What did the reseller suggest when contacted for support? What else has been tried?
marchnz said:
What did the reseller suggest when contacted for support? What else has been tried?
Click to expand...
Click to collapse
I contacted Joying with no answer yet (It's the weekend, they might reply next week).
I tried using different USB ports, USB hubs, USB adapters, changing available configuration.
Interestingly enough, using USB A -> USB C -> USB A adapters made the knob continue working even after CarLink tries to connect to it, but still interrupts an ongoing Android Auto session.
I ended up figuring out the problem. Turns out that certain USB class/subclass identifiers are not properly handled by CarLink. Making the microcontroller report a different combination of usb class/subclass did the trick.
Interesting problem. I just installed a 9" Joying radio into my 2019 Honda Civic Hatchback EX, and I forgot I had an iPod plugged into the USB in the middle storage area. I could not get Wireless CarPlay to work reliably (if at all).
I know the radio does not talk to an iPod, so I moved all the music to an SSD drive on USB3 in the glove box. However, if the drive is connected, Wireless CarPlay will not connect unless I disable and re-enable Bluetooth and reconnect manually, but then it disconnects the USB hard drive.
I don't have the option of changing VID/PID values. I am waiting to hear back from Joying, but thought I would add this to the thread as it is somewhat related behavior with CarLink 2.0.
Hiya, new to forum. Done a search and couldn't find any specific help for my issue.
I have an XTRONS android 12 headunit specific shape for a MK4 Ford Mondeo. Model number is PFS7FSFA_B.
The issue I have is with the USB cable and android auto. I had issues with the stock software for screen mirroring in that it needs an Internet connection (better than a mobile hotspot I've read) to validate or something. Couldn't get that to work. Some googling found me the HUR Headunit Reloaded app.
Paid for that and downloaded it. Managed to get it all setup and working. Then after changing screen resolution in the HUR app it would no longer see that I connected my phone. It would charge but wouldnt actually connect.
I'm using the red USB cable that plugs into the headunit per the instructions.
Issue seems intermittent as yesterday I got it working after a lot of fiddling, then it stopped. Then I pulled the power to the Headunit and it got going again.
But this morning not working again.
I attempted to download the wireless app to try that but couldn't really understand which device needed the hotspot running on it as the instructions were a little ambiguous.
Phone is a pixel 7 pro.
Where should I start looking to troubleshoot this issue. OR are these units just junk in the first place?
Any help appreciated
For reference the USB cable I'm using is brand new, high quality braided cable, data transfer on other devices is fine as I checked, I also tried a couple different cables to the same avail. Leading me to think it's either a software issue in the headunit/app or an actual hardware issue?
Evening update on my USB woes, its now stopped charging the phone at all, it does register that I have plugged the cable into the phone, but when I check the "battery app" on the phone it does not show that its charging.
There were 2 USB cables in the box with this unit, a 4pin plug with a red USB socket, and a 6pin plug with a black USB socket, all the info seemed to point towards the red one labelled mirror link that I need to use. Can anyone confirm if this is correct? Do the 4/6pin plugs work differently or have different power outputs or something?