Screen Issue - Android Head-Units

Good Day
Hope that someone can help with this screen issue.
I have a PX 5(rk3368)
MCU = MTCE HF v3.55
The problem is that the screen looks like it is asleep. I see that the screen is active but is very dark. and touch does not seem to work.
My phone is connected via bluetooth and when I receive a call, the screen comes to life and everything works...... but only when the a call is active.
When I stop the call the screen goes very dark again and does not respond to touch
Any reason this is happening and is there a way to fix it.
Thank you

Ainslei76 said:
Good Day
Hope that someone can help with this screen issue.
I have a PX 5(rk3368)
MCU = MTCE HF v3.55
The problem is that the screen looks like it is asleep. I see that the screen is active but is very dark. and touch does not seem to work.
My phone is connected via bluetooth and when I receive a call, the screen comes to life and everything works...... but only when the a call is active.
When I stop the call the screen goes very dark again and does not respond to touch
Any reason this is happening and is there a way to fix it.
Thank you
Click to expand...
Click to collapse
Could be a number of things but sounds to me like a software issue. You can either try updating your MCU or go all the way and install the Malaysk MOD.
Frankly, if you have MTCE head unit, you should really use Malaysk. If Malaysk doesn't solve the issue then it's most certainly the hardware.

Hi
Thanks for the assistance. I reloaded the MCU and that managed to solve the problem. I am running an older version of the MCU than that came with the unit but have not had any issues thus far.
Thanks again

Related

Problem after MCU update : DSR-n 270

Hello,
The same thing happened to me, i have a dsr-n 270 head unit.
i updated the MCU as the constructor's instruction but the screen stays black now.
When i power it on it writes android as if it will start normal then the screen becames white then black.
I detect the HU bluetooth and i can play and hear music from my smartphone throw bluetooth, the buttons make sound when i press.
someonne can help us pls?
Sorry for my english....

XTRONS D717AL Screen Problem

Hello XDA members,
I have been following XDA for almost a decade and now came my time to ask for a help.
I bought few months ago XTRONS D717AL. First of all, great player, awesome radio tuner. Catches many stations I couldn't with my old Audiovox and Clarion. It comes With Adroid 5.1.1 and Intel chip. Model number says: Full AOSP on Sofia. MCU Ver: HY_SFY170224EF.
But since day one I noticed a weird display actions. Radio starts right after I start the car engine, display pops-up and on random basis, sometimes the display lights up, sometimes not. It takes about 20sec to load the OS and apparently, the touch screen is working. I know where the Quick settings are, if I pull the top navigation panel down when the screen is in a working state. There is a Light button, which enlights or darkens the screen.
In a dark state (blank), if a pull the navigation panel down when the screen is dark and press the Screen button, screen enlights. I know approximately where this Light button is and pressing it screen enlights. That makes me think, that the screen darkness goes to value 0 at some point before even the OS load.
I have rear camera and DVR attached, but since I took everything away today except the ISO wiring harness, it makes me think that these AV in signals are not the issue. I even took away the reverse camera control cable, illumination cable, and GPS antenna. Brake In cable is fine attached.
Last week I tried to factory reset the unit – no luck.
Flashed with a firmware from the Xtrons tech support – no luck.
I recorded a video today which I uploaded on youtube (I can't post links yet, too young to do that )
Search "XTRONS D717AL Screen Problem".
If anybody ran into such a problem and a solution, will be much appreciated to share here.
Many thanks.
Edit: I just noticed, that upon switching off the radio, the dark display flashes for a half second on its way going in. Possible display cable issue?
Xtrons d717al
zhekozhekov said:
Hello XDA members,
I have been following XDA for almost a decade and now came my time to ask for a help.
I bought few months ago XTRONS D717AL. First of all, great player, awesome radio tuner. Catches many stations I couldn't with my old Audiovox and Clarion. It comes With Adroid 5.1.1 and Intel chip. Model number says: Full AOSP on Sofia. MCU Ver: HY_SFY170224EF.
But since day one I noticed a weird display actions. Radio starts right after I start the car engine, display pops-up and on random basis, sometimes the display lights up, sometimes not. It takes about 20sec to load the OS and apparently, the touch screen is working. I know where the Quick settings are, if I pull the top navigation panel down when the screen is in a working state. There is a Light button, which enlights or darkens the screen.
In a dark state (blank), if a pull the navigation panel down when the screen is dark and press the Screen button, screen enlights. I know approximately where this Light button is and pressing it screen enlights. That makes me think, that the screen darkness goes to value 0 at some point before even the OS load.
I have rear camera and DVR attached, but since I took everything away today except the ISO wiring harness, it makes me think that these AV in signals are not the issue. I even took away the reverse camera control cable, illumination cable, and GPS antenna. Brake In cable is fine attached.
Last week I tried to factory reset the unit – no luck.
Flashed with a firmware from the Xtrons tech support – no luck.
I recorded a video today which I uploaded on youtube (I can't post links yet, too young to do that )
Search "XTRONS D717AL Screen Problem".
If anybody ran into such a problem and a solution, will be much appreciated to share here.
Many thanks.
Edit: I just noticed, that upon switching off the radio, the dark display flashes for a half second on its way going in. Possible display cable issue?
Click to expand...
Click to collapse
hi. do you know how to acces recovery mode or button combination? to do a factory reset. and about your problem probabli you have problems with display cable. my car stereo works just fine. THX
andreiutzu21 said:
hi. do you know how to acces recovery mode or button combination? to do a factory reset. and about your problem probabli you have problems with display cable. my car stereo works just fine. THX
Click to expand...
Click to collapse
I have never tried to go to recovery of this unit. But, I found another topic here:
https://forum.xda-developers.com/an...button-combination-to-enter-recovery-t3391682
Regarding my problem, I returned the unit and it was replaced with a new one since it is still in warranty period.

Black Screen on my Joying DE-JY-VM130N2

Hey everyone,
the last days, the screen of my DE-JY-VM130N2 is turning black. The unit seems to function completely, except the screen. Even touch functionality works. Has anyone ever experienced this?
That maybe some problem on the main board,you can contact Joying support to get after sale support
I guess the problem is the core board soldering off.
Watch this video:
https://youtu.be/cUVo41pIqMc
https://youtu.be/nzNI_wcqWQI

problem with screen - Joying headunit

Hello everyone.
I've been using my Joying JY-UL1282N2 for a couple of years now, and I'm really happy with it. But last week the screen has been making problems. I feel that there's a contact issue which causes the screen to suddently turn off. Pressing on the bottom of the screen bezel causes the screen to work fine. The touchscreen works all the time, even when the screen is off.
Here's a video showing the problem:
https://youtu.be/7Le8yL6SvWA
I think it's a hardware issue. Is there a simple way to fix this? I really have no need to upgrade the unit, it's still running the stock ROM too.
Thanks for any help!

No power to unit

I have recently changed the screen on my px5 unit and now the unit will not power up. It worked fine before I changed the screen and now there is no power at all.
Is there something I could have done when changing the screen that could cause this? Or if the screen I have been sent is the wrong screen could that cause this issue?
It’s nothing to do with the car as I have put the original stereo in which works fine.
Any help or suggestion appreciated, thanks.
Edit.. fixed now
Glad you got it sorted. How did you fix it in case others have same issue?
ab1702 said:
I have recently changed the screen on my px5 unit and now the unit will not power up. It worked fine before I changed the screen and now there is no power at all.
Is there something I could have done when changing the screen that could cause this? Or if the screen I have been sent is the wrong screen could that cause this issue?
It’s nothing to do with the car as I have put the original stereo in which works fine.
Any help or suggestion appreciated, thanks.
Edit.. fixed now
Click to expand...
Click to collapse
Maybe you could tell how you fixed it to help other users.

Categories

Resources