Database Users

[FIX] HUAWEI HONOR 4X (CHE-L04 indian edition) STUCKED AT HONOR LOGO

If your device is stucked at honor recovery logo or in a boot loop it is because the recovery of the device is corrupted. You can fix it easily by doing as follows which is very simple.
Procedure:
Step 1. Download the file from here .
HONOR 4X RECOVERY GOOGLE DRIVE DOWNLOAD
Step 2. Extract the downloaded file and copy the entire dload folder (with UPDATE.APP in it) contained in the file we downloaded to the root directory of the Micro SD card.
Step 3. Shut down the phone.
Step 4. Press the VOLUME UP + VOLUME DOWN + POWER Key(simultaneously for few seconds) to power on the phone and enter the Software Upgrade Mode begins automatically. This will start the FIX process on your device.
Step 5. When the progress bar stops(100% upgrade successful), the phone will automatically power OFF and restart.
Thats all.. You have flashed Fresh stock recovery on your Honor 4x.

Has anyone tried this? I am asking this because I have already wasted much data over this and my phone is still stuck on welcome logo only.

honor 4x stuck at fastboot mode
dear sir i have tried your method but its not working i own a honor 4x che1 L04 and while i was flashing it for custom recovery my phone struck at fast boot mode i have been to honor service center but they are unable to solve my problem my contact no is 7379515262 i am really in great problem plzz help me out plzz contact as soon as possible i will be highly grateful to you for your consideration

For CHE1-L04
Dear all,
My honor 4x was stuck in fastboot mode as I was flashing custom Rom in it, so I tried to flash stock rom but it always showed errors, then I went through this site and downloaded this Indonesian stock rom and bingo! My phone is now working normally like before. So maybe flipkart send me the Indonesian honor 4x phone to me labelling che1-L04 or it was my luck.
So go to this site called gizrom dot com
And download the Indonesian stock rom
And follow the steps shown above
This will surely help u guys,
Thank you,
Yogesh Gujarathi

Please provide a working download link.
Thanks.

Hi,
I tried with dload, but no luck... the update got hung at 5%. Please help me

Install Android 6 on an unlocked P8 (bootloop)

Hola everybody.
I have a Huawai P8 (EU) with 5.0.1 Lollipop stock firmware (B200). I've installed it with fastboot (flash recovery, boot, system and cust) and it works (my recovery is TWRP). Now I want to do the same but with Android 6 (B321). I've tried to install with fastboot but i'm stuck in bootloop. I've also tried to put the UPDATE.app it the dload/ folder but i'm stuck at 90% of the installation (with the huawai recovery).
Anyone can help me ?
Thanks !
PS : All firmware are from hxxp://huaweifirmware.com/huawei-p8

Hi brother,I got the almost the same problem with you. I just know that,Android 6 and Android 5 are very different .If you have updated to 6, go back is very difficult,and also use three buttons to flash can't be work. I'm in trouble too and good luck !

P8 Lite (ALE-L21) bricked

Hi,
I have an unlocked and rooted P8 Lite (ALE-L21) with TWRP 2.8.7.0 (I think that's the version) and I had a google play problem so after trying all solutions that I found it didn't work so i used the advanced wipe function that offers TWRP but accidently i wiped system part so I don't have any OS in my phone and now I have a bootloop. I downloaded a firmware "ALE-L21 V100R001C432B052 Europe channel dual sim" but I didn't know how to flash it because i'm new at huawei phones i was an expert in samsung devices however i don't know how to flash the UPDATE.APP file that I found in the dload folder with TWRP can you help me ? (I can't boot into the bootloader mode i can only boot recovery mode (TWRP) )
Thanks for reading that post ^^

Hello,
You can unbrick your device using this method Unbrick Huawei P8 Lite Ale-L21
Simply boot into bootloader(Plug phone into PC and hold volume down+power button, when phone vibrating release the buttons) when is in bootloader run bat(FLASH-ALL.bat) file in archive
This will install Firmware version C432B052 after that you can update via OTA
Regards

Thanks for replying to this post, I searched a little bit more and I found a software called "HuaweiUpdateExtractor" I extracted 4 files from my UPDATE.APP with that software : system, cust, recovery, boot and then flashed them with fastboot but I can't acces to my bootloader with the 2 volume buttons + power it give me an error so i used TWRP I went to Reboot then Bootloader ^^

Need help with Getting package info failed (Huawei Nova Plus)

Hello mates, hope u r doing well,
I have a problem with my Huawei Nova Plus AL10 (chineese version), i tried to update the version from 6 toNougat 7 with Huawei firmware finder, when arrived at 100%, it reboots and stucks in Huawei eRecovery (Getting package info failed msg appears).
Than i tried to downlad the official firmware AL10 (chineese version) and flash the phone with sd card (Dload==>Update), it loads and stops in 5% or 49%, the eRecovery and factory reset has never managed to download anything for me, always failed...
NB: Fastboot is working
Any help please neeeeeeeed solution

Fastboot should work,boot into it ( press and hold Volume Down and Power key for a while. You would see a green android.) and make sure you have adb/fastboot drivers installed then try. If that works, you can flash twrp and then a rom

Help with rooting Huawei p9 lite vns-l31 C185

Hi everyone
I hope someone can help me with this:
I'm trying to root my huawei p9 lite vns-l31 C185 B397
1- FRP and bootloader unlocked
2- I tried flashing and booting into TWRP recovery in fastboot mode using (twrp-3.5.2_9-0-a5y17lte.img) latest version but the phone always gets back to (erecovery)
and i wasn't able to validate the link for the specific device model
download twrp-3.1.1-0-venus.img
3- I tried rooting using Magisk by patching and flashing the (boot.img) file from (UPDATE.APP) file from this ROM (Huawei_P9_Lite_VNS-L31_C636B170_Asia_6.0) which is in different region than my original firmware
eventually I got stuck at ("Your device is booting now")
does anyone have an idea how to fix the problem?

aramous said:
Hi everyone
I hope someone can help me with this:
I'm trying to root my huawei p9 lite vns-l31 C185 B397
1- FRP and bootloader unlocked
2- I tried flashing and booting into TWRP recovery in fastboot mode using (twrp-3.5.2_9-0-a5y17lte.img) latest version but the phone always gets back to (erecovery)
and i wasn't able to validate the link for the specific device model
download twrp-3.1.1-0-venus.img
3- I tried rooting using Magisk by patching and flashing the (boot.img) file from (UPDATE.APP) file from this ROM (Huawei_P9_Lite_VNS-L31_C636B170_Asia_6.0) which is in different region than my original firmware
eventually I got stuck at ("Your device is booting now")
does anyone have an idea how to fix the problem?
Click to expand...
Click to collapse
- Install TWRP 3.1.0.2
Link
- Download Magisk.zip file
https://androidfilehost.com/?fid=673791459329054316
- Download and install Magisk manager 5.4.0
- Enter TWRP and flash Magísk.zip
- Reboot
Or, you can root your phone by installing SuperSu 2.8.2.zip in TWRP.

Awesome ! all done ! thanks a lot for your help !