If your device is stucked at honor recovery logo or in a boot loop it is because the recovery of the device is corrupted. You can fix it easily by doing as follows which is very simple.
Procedure:
Step 1. Download the file from here .
HONOR 4X RECOVERY GOOGLE DRIVE DOWNLOAD
Step 2. Extract the downloaded file and copy the entire dload folder (with UPDATE.APP in it) contained in the file we downloaded to the root directory of the Micro SD card.
Step 3. Shut down the phone.
Step 4. Press the VOLUME UP + VOLUME DOWN + POWER Key(simultaneously for few seconds) to power on the phone and enter the Software Upgrade Mode begins automatically. This will start the FIX process on your device.
Step 5. When the progress bar stops(100% upgrade successful), the phone will automatically power OFF and restart.
Thats all.. You have flashed Fresh stock recovery on your Honor 4x.
Has anyone tried this? I am asking this because I have already wasted much data over this and my phone is still stuck on welcome logo only.
honor 4x stuck at fastboot mode
dear sir i have tried your method but its not working i own a honor 4x che1 L04 and while i was flashing it for custom recovery my phone struck at fast boot mode i have been to honor service center but they are unable to solve my problem my contact no is 7379515262 i am really in great problem plzz help me out plzz contact as soon as possible i will be highly grateful to you for your consideration
For CHE1-L04
Dear all,
My honor 4x was stuck in fastboot mode as I was flashing custom Rom in it, so I tried to flash stock rom but it always showed errors, then I went through this site and downloaded this Indonesian stock rom and bingo! My phone is now working normally like before. So maybe flipkart send me the Indonesian honor 4x phone to me labelling che1-L04 or it was my luck.
So go to this site called gizrom dot com
And download the Indonesian stock rom
And follow the steps shown above
This will surely help u guys,
Thank you,
Yogesh Gujarathi
Please provide a working download link.
Thanks.
Hi,
I tried with dload, but no luck... the update got hung at 5%. Please help me
Related
Recently there was an issue with Honor 4x users who updated from KitKat (emui 3.0) --> Lollipop (emui 3.1) version due to some server issues(might be too many downloads at same time because of many many users of Honor4X in India) This is actually due to a corrupted recovery and flashing a new recovery might solve the issue.
To solve the issue HONOR 4X stucked at Honor logo ,i have an easy solution for all those users: Please download and extract the software package from below official path(around 35MB file)
https://drive.google.com/folder/d/0ByJkSOohdNz_Wnd6cVQ3Nlh1am8/edit
Requirements:
1) Make sure that the Micro SD card is available with enough free space(atleast 200MB) and can be read and write. It is recommended that The Micro SD card is made by Sandisk, Kingstone, or Kingmax.
2) Make sure that the power of the battery is enough to run the process. It is recommended that the power of the battery is more than 50%.
Procedure:
Step 1. Format the Micro SD card (This operation is OPTIONAL ).
Step 2. Copy the entire dload folder (with UPDATE.APP in it) contained in the file we downloaded to the root directory of the Micro SD card.
Step 3. Shut down the phone.
Step 4. Press the VOLUME UP + VOLUME DOWN + POWER Key(simultaneously for few seconds) to power on the phone and enter the Software Upgrade Mode begins automatically. This will start the FIX process on your device.
Step 5. When the progress bar stops(100% upgrade successful), the phone will automatically power OFF and restart.
:fingers-crossed::good: Your device should be working fine now. :good::fingers-crossed:
software upgrade mode not working
my software upgrade mode does not working, it always goes straight to the TWRP recovery mode
Ruisu23 said:
my software upgrade mode does not working, it always goes straight to the TWRP recovery mode
Click to expand...
Click to collapse
Upgrade needs stock recovery to be installed and I don't think tha TWRP is stock
booted to twrp instead of the stock emergency recovery? try using huawei update extractor and get all the .img files and fastboot flash all the .img files. the method is pretty much the same as fixing my own Che2-L11. once you flashed all the .img files, yes. it will not boot. but, you can access the emergency recovery menu (the menu that allows you to scan and would allow reparing via wifi). IF you can get to this menu, then youre ok good to go for forced upgrade via microsd. just make sure you are using the latest version available your your region. IF it didnt work, you have to fallback by fastboot flash the kitkat version of update.app and force upgrade with that kitkat update.app file. then when its fully booted to language screen, proceed normally as you would a hard reset all phone, then use the usual lolipop, next mellow official update.app file. then, your typical twrp, magisk, and more.
honor_ninja95 said:
Recently there was an issue with Honor 4x users who updated from KitKat (emui 3.0) --> Lollipop (emui 3.1) version due to some server issues(might be too many downloads at same time because of many many users of Honor4X in India) This is actually due to a corrupted recovery and flashing a new recovery might solve the issue.
To solve the issue HONOR 4X stucked at Honor logo ,i have an easy solution for all those users: Please download and extract the software package from below official path(around 35MB file)
https://drive.google.com/folder/d/0ByJkSOohdNz_Wnd6cVQ3Nlh1am8/edit
Requirements:
1) Make sure that the Micro SD card is available with enough free space(atleast 200MB) and can be read and write. It is recommended that The Micro SD card is made by Sandisk, Kingstone, or Kingmax.
2) Make sure that the power of the battery is enough to run the process. It is recommended that the power of the battery is more than 50%.
Procedure:
Step 1. Format the Micro SD card (This operation is OPTIONAL ).
Step 2. Copy the entire dload folder (with UPDATE.APP in it) contained in the file we downloaded to the root directory of the Micro SD card.
Step 3. Shut down the phone.
Step 4. Press the VOLUME UP + VOLUME DOWN + POWER Key(simultaneously for few seconds) to power on the phone and enter the Software Upgrade Mode begins automatically. This will start the FIX process on your device.
Step 5. When the progress bar stops(100% upgrade successful), the phone will automatically power OFF and restart.
:fingers-crossed::good: Your device should be working fine now. :good::fingers-crossed:
Click to expand...
Click to collapse
plz resend link
Hi guys!
I have an issue here with the Huawei P8. I wanted to go back to stock from ARROW ROM, so
-I used Huawei Extractor to get the stock recovery and flashed it via fastboot adb
-Updated my phone with the 3 button method and put the DLOAD folder into my SD card
-I used B394 to get the recovery img and to update as well (it was ~1,6Gb)
The update started and everything worked fine, the phone said everything is fine but my phone stuck in bootloop. I mean it doesn't restart or anything but all I can see is the Huawei logo.
What should I do? Any tips how to fix this?
First try getting into Recovery mode & doing a factory reset & cache wipe.
If that doesn't work, try with a stock rom that's one prior to what you had before installing Arrow - like in this thread & follow the steps there (i.e. you first need to flash boot, system & recovery .img files extracted from the prior rom): [GUIDE] How to unbrick HUAWEI P8 when failed to update and ends in bootloop
If you cannot find where to download the prior stock rom, ask for help - someone may be able to provide a link that works. Tell us your phone's full, original model number (GRA-????), the region rom you need (e.g. C432 would be European) & the version B???.
However, if you are watching this, it means ur phone is bricked with huawei p10 lite/p10/p10 plus
Read the replies and follow the instruction noted by @Blackball and his links.
Then you will find you self a way to restore the phone.
Thanks again to @Blackball and rest of you guys, much appreciated for your help.
What on earth is Yoroot?
So, You can't enter fastboot mode am i right ?
Do you connect usb cable to your devices before press Vol- and Power button ?
Current Situation
After the battery was dead, i actually can enter the fastboot and i used TWRP 3.1.1 for huawei P10 Plus from github. double wiped my device and by far i have entered the system normally.
However, the ROM wasn't official and i lost my warranty for unlock my huawei phone. And the custom service from Huawei said that they don't provide any official ROM Since it's Android 7.0 .
This ROM is really crappy that i can't delete/uninstall any Application i installed.(It gets reboot everytime i try to and the Application is still there even i just tried to Delete/Uninstall).
Worst of all, some options does not work properly in "Option" menu . (For example i can't access to "Developer mode" that everytime i press it it tabbed back to the former menu.)
I really hate this crappy menu so i tried to search on the internet for P10 Plus ROM so far i get B133 update ROM i can find and i tried to install it from SDcard by pressing VOL - and VOL + and Power buttom.
It says failed to update system at 5% while updating/recoverying the system.
and the ROM which i'm using was found in HUAWEI's official fan forum from Club.Huawei.com a forum belongs in china.(Rooted rom B140).
Right now seems the only option for me is to find a better ROM than this .(At least won't get me so many bugs like this one .:crying: )
and Thanks for your comment "Bigbearxl" it worked as normally it should after the battery was dead then i recharged it.
Yet Right now the PC doesn't recognize the device though Via-Usb because it's not Huawei official ROM and Hisuite helper only recognize their own ROM and the rest Phone helper or ADB can't recognize the device while The Phone is Booting normal .
And Reply to "Craphead" Yoroot is a special Root tool for Huawei P10/P10 plus made by chinese from Huawei Fan Club forum.
New Update
After rewrited boot.img though fastboot mode from https://forum.xda-developers.com/p10/help/root-huawei-p10-p10-t3589946 thanks to "yury_z, " i can start to delete files with current system, but it's still crappy that it doesn't even have camera
So i think i will try dload method to recovery my phone with firware that i found in forum.
Failed
Looks like i have to stock with that bit longer
dload with update.app method failed. and recovery TWRP install missing md5.
Unless i get System.img or i guess i can't get another system.:crying:
This work for P10plus too
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
WackyJoker said:
Looks like i have to stock with that bit longer
dload with update.app method failed. and recovery TWRP install missing md5.
Unless i get System.img or i guess i can't get another system.:crying:
Click to expand...
Click to collapse
Maybe you could also try installing stock firmware with funkyhuawei, it's not for free though. But dload method never works on P10/plus unfortunately.
thanks @Blackball and @Craphead. i checked both of your method but didn't work and this new twrp 3.1.0 i downloaded displayed sd card 0mb. and i followed poster's step and missing one file.
However i might found a useful Thead that might work and i'm gonna try tonight.
http://www.stechguide.com/huawei-p10-plus-b133-nougat-update/
That is what I wrote.
It seems that firmware finder work for P10/plus now.
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder
@Blackball not sure you what you mean by that, do you mean that you can actually use it to install firmware on p10/p10 plus now? If so how did they manage to get around the authentication issue?
I debranded my phone from L09 to L29 DualSim with this guide. It work with moded stock recoverys.
Blackball said:
That is what I wrote.
It seems that firmware finder work for P10/plus now.
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder
Click to expand...
Click to collapse
well i tried your method but there were some file that can't be downloaded from that post so i used another and,eventhough with complete files, the method i posted and i was going to use it tonight. Failed.
did all the steps from update.bat indicated and all worked fine till the last step that it says " automaticly install system" and the phone shows error at recovery.(similar to dload method because it automaticly create dload and exact those ROM files)
it indicates a big red " ! " sign and stopped. basicly i'm back to "No System Status"
The only method wowrks for my "P10 Plus" is " flash system system.img " method.
yet i don't know how to exact system.img boot.img recovery.img etc from those stock firmware like those chinese.
i have some of their rewrote roms (it's crappy because i has no default camera and it's for chinese P10 Plus A.K.A VKY_L29) .
Yet i can't find any System.img on google by far.
Blackball said:
I debranded my phone from L09 to L29 DualSim with this guide. It work with moded stock recoverys.
Click to expand...
Click to collapse
I haven't tried your Firmware Finder method , i think i can install crappy system.img then try your Firmware Finder method.
Because right now i wiped my system and i'm without system :crying:
Guys This Thead https://forum.xda-developers.com/showthread.php?t=2315547
tells you how extract flashable rom files from firmware update.app.
It should work but i only made to Unknownfile XX .img and i can't download his script "HuaweiFinder" from his google drive.
Holy Crap it worked, i Extracted system.img and other img from update.app by some Chinese scripted unpack script. and I'm trying to restore my device though fastboot mode with adb.
Blackball said:
That is what I wrote.
It seems that firmware finder work for P10/plus now.
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder
Click to expand...
Click to collapse
well just tried your method and at last step it says installing failed. then i reboot entered rec mode choose wipe/factory reset
wiped till 50% and stopped, it can't factory reset.
Before this method fastboot mode was " Phone unlock " " Bootloader unlock."
Now it's just "Phone unlock"
now i'm stuck at boot loop "your device is booting now" then it rebooted and back to "your device is booting now" again then automaticly goes to Erecovery mode. I have to shutdown device for now and hope i can find some solution tomorrow :S
When you try this :
https://forum.xda-developers.com/showthread.php?t=3593108
It's important that you have the 3 zip files from your wanted firmware and rename them correctly. Don't mix with another firmwares.
Blackball said:
When you try this :
https://forum.xda-developers.com/showthread.php?t=3593108
It's important that you have the 3 zip files from your wanted firmware and rename them correctly. Don't mix with another firmwares.
Click to expand...
Click to collapse
i did this method yesterday and, well, i can't get update_full_VKY-L09_hw_eu.zip from the link : http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1475/g104/v85029/f1/full/filelist.xml . only Update.zip and Update_full_data.zip . the other one "update_full_VKY-L09_hw_eu.zip" i had to get it from another webside (it's also b133)
it shows a big "!" sign at the last step . i did everything it tells and tried both sdcard&script way to flash twice both rebrand&same brand update.
after the failure i can't enter "Vol +" and "Vol -" and "Power button" to do dload method . When i try to do that it just goes in Recovery mode.
In recovery mode i tried to wipe data/factory reset. It stopps at 50% which is after wipe and starting to factory reset at 50% it failed.
i try to flash in system.img and boot.img yet i still can not enter the system and stuck at bootloop.
Hello mates, hope u r doing well,
I have a problem with my Huawei Nova Plus AL10 (chineese version), i tried to update the version from 6 toNougat 7 with Huawei firmware finder, when arrived at 100%, it reboots and stucks in Huawei eRecovery (Getting package info failed msg appears).
Than i tried to downlad the official firmware AL10 (chineese version) and flash the phone with sd card (Dload==>Update), it loads and stops in 5% or 49%, the eRecovery and factory reset has never managed to download anything for me, always failed...
NB: Fastboot is working
Any help please neeeeeeeed solution
Fastboot should work,boot into it ( press and hold Volume Down and Power key for a while. You would see a green android.) and make sure you have adb/fastboot drivers installed then try. If that works, you can flash twrp and then a rom
Hi
Please i need help
I want to unlock bootloader and flash TWRP & Magisk on my realme 2 pro 4/64, after i flash all items, my phone was bootlop
Then i tried to relock bootloader, after that, my phone cannot boot and only showed this message.
"the current image(boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it"
how can i fix it?
note : i attached images of the problem, thats not my pictures, i save from the pther person who have the same problem. but i can find the best solution
thank you very much
flash stock recovery through fastboot. Then again install twrp custom recovery through fastboot. Then install stock zip rom by flashing through twrp. You can get stock recovery and stock rom from the following link.
https://forum.xda-developers.com/realme-3-pro/how-to/guide-to-stock-rom-stock-recovery-t3940604
fix
kisutbener said:
Hi
Please i need help
I want to unlock bootloader and flash TWRP & Magisk on my realme 2 pro 4/64, after i flash all items, my phone was bootlop
Then i tried to relock bootloader, after that, my phone cannot boot and only showed this message.
"the current image(boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it"
how can i fix it?
note : i attached images of the problem, thats not my pictures, i save from the pther person who have the same problem. but i can find the best solution
thank you very much
Click to expand...
Click to collapse
have you fixed?how
Bootloop please help asap!!
I was trying to install custom rom but I didn't took back up and wiped every thing on internal memory and also flashed stock recovery of realme 2 pro LOCKED the bootloader also I was hoping that I would be able to install stock rom by realme . But now am stuck at bootloop only realme logo appers
Basically I only have stock recovery on my phone and nothing else in the internal no OS installed bootloader is also locked so am not able to install twrp recovery to please help me install any rom .I am stucked due to lockdown no Service center is open. Please help asap??? I can't leave without my phone in this lockdown
davsagar4 said:
I was trying to install custom rom but I didn't took back up and wiped every thing on internal memory and also flashed stock recovery of realme 2 pro LOCKED the bootloader also I was hoping that I would be able to install stock rom by realme . But now am stuck at bootloop only realme logo appers
Basically I only have stock recovery on my phone and nothing else in the internal no OS installed bootloader is also locked so am not able to install twrp recovery to please help me install any rom .I am stucked due to lockdown no Service center is open. Please help asap I can't leave without my phone in this lockdown
Click to expand...
Click to collapse
Possible 100% solution, but it's paid.(800 inr)
In my case I'm fully locked (by vol down and power,vol up and power,both up down and power) i only see error..(no fastboot windows)
So to overcome this you need to pay someone some money (i paid 800,for oppo special I'd and password for 1 time),and download a compatible firmware (rom) and msm download tool in pc make sure you also have team viewer, as damn oppo won't allow you to flash firmware for free ad there is no crack for msmtool...hope this helps.. i also did this process during lockdown and learned a moral:-never relock bootloader
Qfil and other processes doesn't worked for me?
Don't wast time in crackes etc there is no official crack of realme 2 pro firmware bcoz there is always a different tool for each rom???..
I waited to fix this for 27 days.
davsagar4 said:
I was trying to install custom rom but I didn't took back up and wiped every thing on internal memory and also flashed stock recovery of realme 2 pro LOCKED the bootloader also I was hoping that I would be able to install stock rom by realme . But now am stuck at bootloop only realme logo appers
Basically I only have stock recovery on my phone and nothing else in the internal no OS installed bootloader is also locked so am not able to install twrp recovery to please help me install any rom .I am stucked due to lockdown no Service center is open. Please help asap
Click to expand...
Click to collapse
He_man_r35 said:
Possible 100% solution, but it's paid.(800 inr)
In my case I'm fully locked (by vol down and power,vol up and power,both up down and power) i only see error..(no fastboot windows)
So to overcome this you need to pay someone some money (i paid 800,for oppo special I'd and password for 1 time),and download a compatible firmware (rom) and msm download tool in pc make sure you also have team viewer, as damn oppo won't allow you to flash firmware for free ad there is no crack for msmtool...hope this helps.. i also did this process during lockdown and learned a moral:-never relock bootloader
Qfil and other processes doesn't worked for me?
Don't wast time in crackes etc there is no official crack of realme 2 pro firmware bcoz there is always a different tool for each rom???..
I waited to fix this for 27 days.
Click to expand...
Click to collapse
hey can you provide me that person's contact info?