Hi,
I have an unlocked and rooted P8 Lite (ALE-L21) with TWRP 2.8.7.0 (I think that's the version) and I had a google play problem so after trying all solutions that I found it didn't work so i used the advanced wipe function that offers TWRP but accidently i wiped system part so I don't have any OS in my phone and now I have a bootloop. I downloaded a firmware "ALE-L21 V100R001C432B052 Europe channel dual sim" but I didn't know how to flash it because i'm new at huawei phones i was an expert in samsung devices however i don't know how to flash the UPDATE.APP file that I found in the dload folder with TWRP can you help me ? (I can't boot into the bootloader mode i can only boot recovery mode (TWRP) )
Thanks for reading that post ^^
Hello,
You can unbrick your device using this method Unbrick Huawei P8 Lite Ale-L21
Simply boot into bootloader(Plug phone into PC and hold volume down+power button, when phone vibrating release the buttons) when is in bootloader run bat(FLASH-ALL.bat) file in archive
This will install Firmware version C432B052 after that you can update via OTA
Regards
Thanks for replying to this post, I searched a little bit more and I found a software called "HuaweiUpdateExtractor" I extracted 4 files from my UPDATE.APP with that software : system, cust, recovery, boot and then flashed them with fastboot but I can't acces to my bootloader with the 2 volume buttons + power it give me an error so i used TWRP I went to Reboot then Bootloader ^^
Related
How to Unbrick huawei P8 Lite ALE-L21
It was bricked after flashing custom recovery TWRP , and it is rooted …now phone is not booting ,stuck on huawei logo ,applied all methods ,hard reset etc..
Software installation via sd card three buttons installation is also getting failed
Software flashing through fastboot/adb is also not working at all just because it was rooted .
have tried
B170
B050
B120
How can I overcome this problem please help me
....
Same problem
Asad-143007 said:
How to Unbrick huawei P8 Lite ALE-L21
It was bricked after flashing custom recovery TWRP , and it is rooted …now phone is not booting ,stuck on huawei logo ,applied all methods ,hard reset etc..
Software installation via sd card three buttons installation is also getting failed
Software flashing through fastboot/adb is also not working at all just because it was rooted .
have tried
B170
B050
B120
How can I overcome this problem please help me
Click to expand...
Click to collapse
fastboot flashing is root indipendent, needs unlocked bootloader.
how did u get root permission?
If you get here because you have bricked your p8 lite, it's possible to revive it. Did mine without even factory reset. This might help (when you get there,, type the flash commands in small letters instead)
http://forum.xda-developers.com/showpost.php?p=66823156&postcount=15
good day,
im new here so excuse me if i do anything inappropriate.
so i tried to root a P8 ALE_L04 EMUI 3.1 with android 5.1
and i think i bricked it. the phone is stuck on the FASTBOOT&RESCUE MODE screen and when i reboot or press the volume + power keys it goes directly to this same screen again after the huawei logo screen.
when i run the fastboot devices command on my pc i get the following: 2d7c2ea fastboot.
SO i unlocked the bootloader and tried this method to root : youtube - How to Root the Huawei P8 Lite Android phone
i got it running and the rootchecker gave a positive but the super su binary needed to install or update, so i tried to update it and thats when my device got stuck on the fastboot&rescue screen bootloop.
is this fixable? i already have the stock kernel in the sd card:
Open source code
Version: ALE_kernel_[Android 5.1 EMUI3.1]
MD5: 7FE7EEBF48D0A475E3DB70DA44840F2A
thanks for help
UPDATE:
im downloading Huawei P8 Lite Firmware ALE-L04C567B3 to apply UPDATE.APP using adb fastboot. id still appreciate any help
So bricked my handy, after that I flasht the wrong stock Software. (Huawei P9 Lite L31 Single Sim) I was on L21xxxx, but I wanted the old OS back. After trying out several methods to flash back the right os, something happend. My Handy is now on VNS-C900B161 and his modelnumber is hi6250 instead Huawei P9 Lite L21/L31. Can please somebody help me? I just want my os back on VNS-L31C432Bxx and update without flashing to nougat.
germain145 said:
So bricked my handy, after that I flasht the wrong stock Software. (Huawei P9 Lite L31 Single Sim) I was on L21xxxx, but I wanted the old OS back. After trying out several methods to flash back the right os, something happend. My Handy is now on VNS-C900B161 and his modelnumber is hi6250 instead Huawei P9 Lite L21/L31. Can please somebody help me? I just want my os back on VNS-L31C432Bxx and update without flashing to nougat.
Click to expand...
Click to collapse
Flash the C432 oeminfo then reflash B160...
And never flash L21 firmware on L31... If you have L31 flash L31 firmware!.
Thanks for responding! I know it sounds stupid but can you write step by step what I should do now? Im really new to the whole flash, Recovery thing. 70% what I have done was luck. Im sorry for my English Im German.
germain145 said:
Thanks for responding! I know it sounds stupid but can you write step by step what I should do now? Im really new to the whole flash, Recovery thing. 70% what I have done was luck. Im sorry for my English Im German.
Click to expand...
Click to collapse
1.unlock your bootloader
2.install twrp
3.download c432 oeminfo and b160 update.zip
4.copy c433 oeminfo to your sd card/phone and extract update.app from update.zip and put it in dload folder in sd card(you make dload folder)
5.boot to recovery and flash oem info
6.turn off your phone
7.hold power,volume down+volume up buttons till update starts to install and be patient
ok, I wanted to flash the oeminfo and they were 2 options: install into boot or install into recovery. I couldnt install into boot so I installed into recovery. The installation was succesfull. After that I tried to install the update.app but when I press down the three buttons, it starts the Huawei Erecovery. So I tried it with the secret menu to do a local update but after that it starts the Erecovery again.
When I try to flash it into boot (what i think what I suppost to do) it says that the file is too large to flash it into boot partition.
germain145 said:
When I try to flash it into boot (what i think what I suppost to do) it says that the file is too large to flash it into boot partition.
Click to expand...
Click to collapse
it should work both ways, are you sure you have the correct oeminfo? just try to flash oeminfo in meticulus twrp and then use the 3 buttons to flash update.app in sdcard/dload
germain145 said:
ok, I wanted to flash the oeminfo and they were 2 options: install into boot or install into recovery. I couldnt install into boot so I installed into recovery. The installation was succesfull. After that I tried to install the update.app but when I press down the three buttons, it starts the Huawei Erecovery. So I tried it with the secret menu to do a local update but after that it starts the Erecovery again.
Click to expand...
Click to collapse
Are you sure you are pressing all three buttons? Make sure all buttons are working,because you shouldnt get erecovery by doing that
force shutdown phone , if not work take backpanel out no screws only little gleu and 5-6 normal screws inside, plug off battery and then put inside > hold volume + and - together and press power volume button untill you see the huawei logo.
Ok, I checked my volume buttons they are working. But I press all three buttons and still it starts twrp.
hello!
i have a p9 lite vns-l21c432b380 dual sim
some days ago i contacted huawei to get the bootloader unlock code. after that i unlocked it via fastboot, flashed elite twrp recovery 3.2.1.0. everything working fine til now. i then tried to flash from twrp latest lineageOS release but it doesn't seem to be working as on reboot i get stuck on "you're device is unlocked and it can't be trusted" screen with the options to boot system and erecovery. it just stays there, no sign of lineage os.
i tried to restore at least the stock rom via dload and 3 button method and to flash extracted bits frome the update.app file via fastboot with no success: i always get a "update installation failed" error, with the only option to reboot the phone to nothing
what am i doing wrong?
update: i tried to flash oem info for l21c432 dual sim from twrp, then retried to install via dload and 3 button method. no luck, still "software install failed" and nothing else
OEMINFO: ftp://XDA-Dev:[email protected]/Oeminfo/L21/L21_DS_C432_by_EasySR.zip
FIRMWARE: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66034/f1/full/update.zip
i'll try to flash both via fastboot, since the recovery won't now mount data
thank you
fastboot gives me "command not allowed", flashing via elite twrp 3.1.1 "invalid zip format". what am i missing?
You need to flash oeminfo with TWRP. (Unpack the arhive then copy the oeminfo.img on your phone)
And also , unpack update.zip .
Then make a new folder on sdcard called dload and put update.app there.
Then boot into dload mode and it should work.
i'm not sure of how it worked. now i have TWRP 3.0.2 installed and stock ROM VNS-L31C432B150. some how it changed from l21 to l31.
do you think there's a way i can flash latest lineage os or should i stick to b150? in case how can i do it?
thank you for patience and time
Hi everyone
I hope someone can help me with this:
I'm trying to root my huawei p9 lite vns-l31 C185 B397
1- FRP and bootloader unlocked
2- I tried flashing and booting into TWRP recovery in fastboot mode using (twrp-3.5.2_9-0-a5y17lte.img) latest version but the phone always gets back to (erecovery)
and i wasn't able to validate the link for the specific device model
download twrp-3.1.1-0-venus.img
3- I tried rooting using Magisk by patching and flashing the (boot.img) file from (UPDATE.APP) file from this ROM (Huawei_P9_Lite_VNS-L31_C636B170_Asia_6.0) which is in different region than my original firmware
eventually I got stuck at ("Your device is booting now")
does anyone have an idea how to fix the problem?
aramous said:
Hi everyone
I hope someone can help me with this:
I'm trying to root my huawei p9 lite vns-l31 C185 B397
1- FRP and bootloader unlocked
2- I tried flashing and booting into TWRP recovery in fastboot mode using (twrp-3.5.2_9-0-a5y17lte.img) latest version but the phone always gets back to (erecovery)
and i wasn't able to validate the link for the specific device model
download twrp-3.1.1-0-venus.img
3- I tried rooting using Magisk by patching and flashing the (boot.img) file from (UPDATE.APP) file from this ROM (Huawei_P9_Lite_VNS-L31_C636B170_Asia_6.0) which is in different region than my original firmware
eventually I got stuck at ("Your device is booting now")
does anyone have an idea how to fix the problem?
Click to expand...
Click to collapse
- Install TWRP 3.1.0.2
Link
- Download Magisk.zip file
https://androidfilehost.com/?fid=673791459329054316
- Download and install Magisk manager 5.4.0
- Enter TWRP and flash Magísk.zip
- Reboot
Or, you can root your phone by installing SuperSu 2.8.2.zip in TWRP.
Awesome ! all done ! thanks a lot for your help !