Hi guys,
can somebody please help me with the following problem?
Out of nothing my T-Mobile MDA Vario stopped giving sound with out the headset connected. without any reason and the out of nothing it stops giving sound without the headset connected. this all happends after i installed tornado (a2dp) to get sound to my bluetooth headset. anyone knows whats gone wrong, i search the forums here but couldnt get no clear answers
I had a similar problem. No sound from the speakers at all, but through the headset it was fine. As if the speaker itself was dead. But it wasn't caused by any Bluetooth fault.
Effectively, the phone hadn't realised that the headset had been unplugged. To solve it I was told to rapidly pummel the headset jack with the headset plug. Somehow, after some time, the phone is jogged back into a working state.
then whats the point havina bluetooth headset if u have to carry ur handsfree to get ur fone ringing again normally aint there any better solutions to this
Hi, guys. I have a problem with my xperia and hands-free bluetooth funcionality (I have tested with several hands-free). In half of a call, I start to hear the voice through the phone, and not through the hands-free, but the bluetooh is turned on, and I'm able to manage the phone through the hands-free (I can see the contacts, start and finish a conversation, etc). Simply the sound is in the phone, not in the hands-free.
I have too the same problem that everybody has (the bluetooh turns off), and I had fix it with BTKeepAlive.CAB, published in this forum (Thanks to the creator)
¿Anyone can help me?
I'm having a similar problem, but with my in-ear bluetooth hands-free.
When making a call, either from the phone or by redialing with the hands-free, the sound ends up in the phone. When answering an incoming call, either with the phone or with the handsfree, sound ends up in phone.
I've tried three different handsfrees (two SonyEricsson and one Invisio), with same result.
The strange thing is, when having an ongoing call, with the sound in the phone as stated above, I can hear a low noice in the handsfree, indicating that it is active. When pressing menu, the only option, regarding handsfree, is "Turn handsfree off".
Is there anyone that has a solution to this?
BUMP
Anyone?
thorell said:
I'm having a similar problem, but with my in-ear bluetooth hands-free.
When making a call, either from the phone or by redialing with the hands-free, the sound ends up in the phone. When answering an incoming call, either with the phone or with the handsfree, sound ends up in phone.
I've tried three different handsfrees (two SonyEricsson and one Invisio), with same result.
The strange thing is, when having an ongoing call, with the sound in the phone as stated above, I can hear a low noice in the handsfree, indicating that it is active. When pressing menu, the only option, regarding handsfree, is "Turn handsfree off".
Is there anyone that has a solution to this?
Click to expand...
Click to collapse
I believe I can aswer this myself after following an instruction in another thread here on XDA, even if the solution sounds a bit strange:
I've made a hardreset, and re-installed every program that I want, everything with Bluetooth turned OFF. After that, I turned BT on and added my handsfree. Now its working super.
i have the froyo 2.2 installed. once my phone is paired and connected to a bluetooth device, when i end a call, i can hear a "ticking" sound from the phones headset. if i disconnect bluetooth, no such sound from phones headset. can any one reproduce this issue? thanks
happens to me as well.
not sure of the cause or of the fix..
you are not alone.
I've just encountered a strange and frustrating issue that began a couple of days ago on 7/12. I have a Galaxy S4 running 4.4.2 and a 2010 Nissan Altima. I've had my car for 4 years and have never had this issue with any of my phones until this past Saturday so I am convinced it is my phone that is the issue. The Bluetooth pairing will connect without issues (indicator on both phone and car screen indicates so) and I am able to make/receive a call with sound successfully for one time. If I a make or receive a second call, there will be no sound both on my end or the caller on the other end. I know the call connects since the call timer starts on both my phone and the car screen as well as on the caller's phone (tested out with my wife's phone while in the car). I will not even hear a ring tone, the call will just connect without sound. Even if I disconnect the Bluetooth connection, there will not be any sound coming from my handset and the caller on the other end cannot hear me when trying to perform a call. The issue can be temporarily fixed with a phone restart. After making one successful call on Bluetooth after a phone restart, the no sound issue will return. I'm not sure what to do at this point. I've re-done the phone pairing with my phone and car but the issue resurfaces. I see somebody posted a very similar issue on a different website on the same exact day I started getting the issue (Can only hear phone calls on Bluetooth) so I am wondering if we got some sort of app update that has started to interfere with Bluetooth connections. Any advice would be appreciated. Thanks.
When I connect to bluetooth headset or car bluetooth I can make couple of phone calls and after while the speaker and mic is not working. I cannot hear anything nor can they hear me.
After I reboot the phone it is OK for while but after few phone calls it is the same again. When only disconnect bluetooth it is still not working only reboot helps.
I have tried to unpair/pair again, soft reset It has been happening for few months now. I have stock 4.4.2
I suspect it could be some app, but not sure.
Anyone having similar issue / advice?
Thanks
Michal