ticking or no ticking - Epic 4G General

i have the froyo 2.2 installed. once my phone is paired and connected to a bluetooth device, when i end a call, i can hear a "ticking" sound from the phones headset. if i disconnect bluetooth, no such sound from phones headset. can any one reproduce this issue? thanks

happens to me as well.
not sure of the cause or of the fix..
you are not alone.

Related

Bluetooth and Sony HBH-DS980

I have now tried 3 different bluetooth headsets with my AT&T Tilt with Stock Rom. First was my BlueAnt V12 I used great with my RAZR then I bought a Motorola S705 now I have Sony HBH-DS980.
With the BlueAnt V12 the audio was low and tinny and couldn't hear the caller
The Motorola S705 sounded good minor choppiness but the callers couldn't hear me worth a damn. Both of these devices paired great and kept connection, only the Motorola would loose connection if I got a system alarm or if I was streaming music. For just handset operation it worked great. With the Sony it seems to be a crap shoot when they are going to work. I installed JetWare to enable Caller ID Name and Ringtone through headset and when I pair them the first time they work great all day long. However if I turn bluetooth off on the phone and then back on I have issues with disconnecting and sound not going through headset for calls.
So I installed the new Official AT&T Rom from HTC's Site the other day hoping the bluetooth improvements they made would help. I decided to try JetWare again just to see if it worked, again I started having problems again. So I hard reset and didn't install the JetWare Extensions. For the first day everything worked great. Next day I fired it up it's up to it's old tricks of disconnecting after a call.
Anyone else having these issues? My state is going to be bluetooth only while driving in about 4 months so I really need bluetooth to work.
Can you charge the sony ds980 via usb?
No it has a real strange plug for charging
Hi, I have the Sony Ds980. I've experienced similar problems in the past.
check your Bluetooth settings on the phone: communication manager --> Settings --> bluetooth. Select your device (ds-980) but don't double click on it. and then check its mode: in that window, ensure that you have checkmarks in both options (i.e, Turn on bluetooth & make sure this device is visible to other devices). Sometimes, when you restart your bluetooth headset, the second option is left unchecked, thus causing disconnections between it and the device.
another option is to trigger the headset button. sometimes, when a call comes in, I would have to do this once or twice before it connects.
I think it is a bug.
i have the Jetware extension and MSVoice, and they help with the caller ID.
HTH,
rgds, Manny
I'm trying to decided between the DS980 and the Moto S9.
I'm so tired of wasting my money on crap.
Thanks I'll have a look at those settings, I just wish JetWare uninstalled nicely
I have been running it lately without JetWare and the only issue I am having this way is the wireless stereo portion disconnects after each Incoming call it does not do this if I place a call.
With JetWare I can sometimes keep it connected no matter what the issue is it connects but when I place a test call it rings on the headset but when I answer the call it isn't comming in on the headset it is still on the phone although the call button works and ringing on the headset works. It got to be a pain to have to place a few test calls to make sure the headset was working.
dalavar said:
Thanks I'll have a look at those settings, I just wish JetWare uninstalled nicely
I have been running it lately without JetWare and the only issue I am having this way is the wireless stereo portion disconnects after each Incoming call it does not do this if I place a call.
With JetWare I can sometimes keep it connected no matter what the issue is it connects but when I place a test call it rings on the headset but when I answer the call it isn't comming in on the headset it is still on the phone although the call button works and ringing on the headset works. It got to be a pain to have to place a few test calls to make sure the headset was working.
Click to expand...
Click to collapse
Well, that does it for me. The DS980 is officially off my list.

Bluetooth Problem, im stuck DEAF and MUTE

Okay I have Mygig radio system in my Jeep Wrangler and just got the VR and Uconnect(bluetooth) enabled, with the mic installed. So I decide to pair up my phone with radio, it pairs fine and everything is recognized, but once paired and try to make or receive a call there is no audio what so ever nor can the callers hear me, its silent on both ends, and I have figured out its not radio, as once I unpair and turn bluetooth, the phone stays MUTE and DEAF, cannot hear ringers, cannot hear opening keyboard sounds, cant hear ring when making calls, cant hear anyone on other end nor can they hear me, as if it goes completly on earpiece and mic on phone. What am I doing wrong, what settings should I have on my bluetooth when to pair?? My phone is running a factory rom, the latest official rom from htc through sprint. Not running any leak version with revA and GPS, just factory. Only mods I have wmwifi router, home customizer, touchflo, htc cube and htc action screen................ Help me please, what settings should be when paired?

I got the HBH-DS200 headset, for music it works all fine. but not in phone call

I got the HBH-DS200 headset, for music it works all fine.
But when i use it in a call the sound are really crappy. A lot of noice and very low volume.
I have tried my headset with other phones without this issue. does anyone have a solution to have the same clear sound in a phone call as i have when lissen to music.
i found another annoying bug. When a call are finished it shutdowns the bluetooth connection just for a few seconds so my headset disconnects.
Has anyone a working connection with HBH-DS200 headset?
I suspect it's my Tilt's problem coz A2DP drop happens to my DS220 and car kit JVC BT-1

Weird issue with MW600 headset and x10

Whenever i use the MW600 to anwer calls , ppl complain that when they say something they can hear themselves echoing what they said. Anyone with this headset has the same issue or know how to fix it?
Turn the volume down on it then.. Pretty simple fix.
thanx for the suggestion, but turning down volume when using it in car doesn't work, it seems that when you use headset the phones mic doesn't turn off so it picks up the car speakers and that's why people hear themselves echoing
The MW600 isn't made for Car Use... So the issue can be normal!
I've noticed that my MW600 doesn't always sync to Phone and Media audio, sometimes just to Media - which will probably mean that the Mic on the phone is still open, hence the problem you describe.
I've worked out that the way to avoid this is to connect to the phone the following way:
1) Enable Bluetooth on phone
2) Turn on MW600
3) Check in BT setting that both Phone and Media audio are connected and that the headphone symbol is displayed.
I find that if I turn on the MW then activate BT on the phone, they just don't connect properly...
I use mine in the car on a regular basis and find it superb, and have had no complaints
thanx for this tip I'm going to try it, I hope it fixes the echoing

[Q] Jabra Extreme2 with Epic 4G causes phone to freeze

I have searched and searched and I am actually currently waiting two new Jabra Extreme2 headsets from Jabra.... but I don't have a lot of faith that the problem will be solved.
The scenario is simple.. Calling and listening to music is fine. The issue is on incoming calls, and only MOST of the time.
If the headset is on and connected (bluetooth) the ringtone will start to stutter and the announcement in the headset will be "call from " and a number instead of the actual name in the contact list. At this point the phone will be frozen. The call will roll to voicemail. The only way to shut the headphone up from repeating the number continuously is to turn it off. Once the headset is off, you can usually get to the pulldown and turn off bluetooth. It will take awhile (minute or two) to release, but it will. At this point you can turn on the headset and turn on bluetooth again and make a call without issue. Maybe even receive a call... but about 8 out of 10 calls will result in the above.
My wife and I each have an Epic 4g and a Jabra Extreme2 headset. The issue is the same on both phones. We have older Jabra BT530 headsets that other than sounding like crap. (old bluetooth tech) work great, no issues.
I'm not convinced the issue is the headset. I mean really, there is no "software" for the headset. It's just a bluetooth connection, so why is the phone freezing? I tried different ringtones as I thought that might be the issue, but it isn't.
Does anyone have any thoughts or insight, or any idea if it could actually be the headset causing the phone to freeze.
Also, does anyone know how to disable the PBAB as that seems to be related but without being able to disable it, I can't confirm.
Any help or insight would be greatly appreciated. Anyone using the Extreme2 ?
Well, I have a Moto Finiti Bluetooth and I am not having any of the issues you mentioned so far. Thankfully its connecting better than earlier ROM releases on my Epic
Sent from my SPH-D710 using xda premium

Categories

Resources