Okay I have Mygig radio system in my Jeep Wrangler and just got the VR and Uconnect(bluetooth) enabled, with the mic installed. So I decide to pair up my phone with radio, it pairs fine and everything is recognized, but once paired and try to make or receive a call there is no audio what so ever nor can the callers hear me, its silent on both ends, and I have figured out its not radio, as once I unpair and turn bluetooth, the phone stays MUTE and DEAF, cannot hear ringers, cannot hear opening keyboard sounds, cant hear ring when making calls, cant hear anyone on other end nor can they hear me, as if it goes completly on earpiece and mic on phone. What am I doing wrong, what settings should I have on my bluetooth when to pair?? My phone is running a factory rom, the latest official rom from htc through sprint. Not running any leak version with revA and GPS, just factory. Only mods I have wmwifi router, home customizer, touchflo, htc cube and htc action screen................ Help me please, what settings should be when paired?
Related
Hi All: I have paired the headset fine with my phone and made calls before but I can not switch a call from the handset to the headset while a call is already in progress. Once I end the call, I can pair the headset fine to make a NEW call but I'm having problems switching the call when it is already in progress. I can go to the phone and manually switch it to hands free but I thought that if I powered on the headset while a call was already in progress, that would route the conversation from the handset to the headset. Is that correct or can it not do this without some tweaking? Thanks.
I have the same setup and I can answer the call on the phone, then "open" the H700 and the phone re-directs the call thru the headset within about 2 seconds from opening the headset.
If I'm on the headset, I can press and hold the call button on the H700 and the call goes on hold. I can "close" the headset and then un-hold the phone using the touch screen and resume the call on the 8525.
Now I believe that the standard bluetooth stack is crap, and I have had many instances where the phone just stops linking the Bluetooth. I can usually restore the link just by using the comm manager to turn off the bluetooth radio, then turning it back On. I have even done this during a call and it worked.
I have always had solid, loud audio with the H700, BUT, several callers have mentioned that my voice was often clipping a word every few seconds. I don't know what that's all about.
Do you know whether you need to select any special settings or do anything special in the pairing setup with the phone or headset? I do not know how to have the conversation directed to the headset after turning it on when I am already on the call. It works fine to start a new call or to answer a call directly through the headset but can't join a call in progress. Would appreciate anyone's help. Thanks.
I have now tried 3 different bluetooth headsets with my AT&T Tilt with Stock Rom. First was my BlueAnt V12 I used great with my RAZR then I bought a Motorola S705 now I have Sony HBH-DS980.
With the BlueAnt V12 the audio was low and tinny and couldn't hear the caller
The Motorola S705 sounded good minor choppiness but the callers couldn't hear me worth a damn. Both of these devices paired great and kept connection, only the Motorola would loose connection if I got a system alarm or if I was streaming music. For just handset operation it worked great. With the Sony it seems to be a crap shoot when they are going to work. I installed JetWare to enable Caller ID Name and Ringtone through headset and when I pair them the first time they work great all day long. However if I turn bluetooth off on the phone and then back on I have issues with disconnecting and sound not going through headset for calls.
So I installed the new Official AT&T Rom from HTC's Site the other day hoping the bluetooth improvements they made would help. I decided to try JetWare again just to see if it worked, again I started having problems again. So I hard reset and didn't install the JetWare Extensions. For the first day everything worked great. Next day I fired it up it's up to it's old tricks of disconnecting after a call.
Anyone else having these issues? My state is going to be bluetooth only while driving in about 4 months so I really need bluetooth to work.
Can you charge the sony ds980 via usb?
No it has a real strange plug for charging
Hi, I have the Sony Ds980. I've experienced similar problems in the past.
check your Bluetooth settings on the phone: communication manager --> Settings --> bluetooth. Select your device (ds-980) but don't double click on it. and then check its mode: in that window, ensure that you have checkmarks in both options (i.e, Turn on bluetooth & make sure this device is visible to other devices). Sometimes, when you restart your bluetooth headset, the second option is left unchecked, thus causing disconnections between it and the device.
another option is to trigger the headset button. sometimes, when a call comes in, I would have to do this once or twice before it connects.
I think it is a bug.
i have the Jetware extension and MSVoice, and they help with the caller ID.
HTH,
rgds, Manny
I'm trying to decided between the DS980 and the Moto S9.
I'm so tired of wasting my money on crap.
Thanks I'll have a look at those settings, I just wish JetWare uninstalled nicely
I have been running it lately without JetWare and the only issue I am having this way is the wireless stereo portion disconnects after each Incoming call it does not do this if I place a call.
With JetWare I can sometimes keep it connected no matter what the issue is it connects but when I place a test call it rings on the headset but when I answer the call it isn't comming in on the headset it is still on the phone although the call button works and ringing on the headset works. It got to be a pain to have to place a few test calls to make sure the headset was working.
dalavar said:
Thanks I'll have a look at those settings, I just wish JetWare uninstalled nicely
I have been running it lately without JetWare and the only issue I am having this way is the wireless stereo portion disconnects after each Incoming call it does not do this if I place a call.
With JetWare I can sometimes keep it connected no matter what the issue is it connects but when I place a test call it rings on the headset but when I answer the call it isn't comming in on the headset it is still on the phone although the call button works and ringing on the headset works. It got to be a pain to have to place a few test calls to make sure the headset was working.
Click to expand...
Click to collapse
Well, that does it for me. The DS980 is officially off my list.
hi, and thank you for viewing,
when i connect my bluetooth headset my x1 wont ring anymore. it vibrates and rings through the earpiece but not outloud.
i dont wear the earpiece until i get a call as i find it uncomfortable so i get a lot of missed calls.
i have looked through the settings but must be missing somthing can anyone help me?
thank you for your time
never heard about any bluetooth able phone being to direct audio to a headset while still playing it out it's speaker
people seem to use the headset to save other people from ringning apart from the handsfree thing
thanks,
what i mean is i want the X1 TO ring as normal so i know someone is ringing,
at the mo i have a bluetooth earpiece and when someone calls, my X1 is silent and the ringtone is played through the earpiece.
as i dont wear the earpiece until i recieve a call due to comfort i miss many calls when im in the car.
im sure it never done this in R1A but not certain
It should normally ring...my phone and bluetooth both rings at the same time....may be goto bluetooth select the device and only keep a check on handsfree option....
well after updating to R3A the problem is now resolved.
Another one of those "dunno what it was but its working now" things
thank you for your help
i have the froyo 2.2 installed. once my phone is paired and connected to a bluetooth device, when i end a call, i can hear a "ticking" sound from the phones headset. if i disconnect bluetooth, no such sound from phones headset. can any one reproduce this issue? thanks
happens to me as well.
not sure of the cause or of the fix..
you are not alone.
Hi All
I have installed the Poland 6.0.1 Rom on my Note 4 and everything seem to be working correctly
When I connect my phone to my Car (Ford Ranger 2016 model) its sync's correctly, downloads the phonebook and everything. I can even from the car make a call and it pushes it to the phone correctly as the phone initiates the call and connects the call when they pick up.
The problem is that there is no audio on the speakers. I can mid call select speaker (on the phone) and can then have a conversation with someone over speaker phone but when I push it back to Bluetooth there is no audio.
This worked 100% on 5.1.1 but since the update to 6.0.1 I cannot hear anything on the car speakers even though all the other functions work correctly.
Is this something that can be fixed?
Did you factory reset after upgrade?
nemesis.sisemen said:
Did you factory reset after upgrade?
Click to expand...
Click to collapse
Yes I did. I factory reset just now and tried using it without installing any apps. I can steam music fine. Its just when you make a call that there is no audio. Everything else seem to be working perfectly. I can scroll the address book I can choose and change music, I can place calls with the exception that there is no audio when on a call.....
Did you go to bluetooth settings
nemesis.sisemen said:
Did you go to bluetooth settings
Click to expand...
Click to collapse
Yes I did and both Music and Phone is enabled for it.
I might have the same issue
Hi.
I think this is a general problem plaguing this update.
I have Plantronics E50 Headset. Worked great with 5.1.1.
I use headset as hands-free and usually place calls by holding button on headset for 2 seconds and then issuing voice command "call <contact name>".
This is not done via S Voice but via standard Google app voice.
Like said, all worked great, no issues in 5.1.1.
What I get now after the update to 6.0.1(also Poland 910C, yes, I wiped all after update, but still same behavior), is that I can place calls using the headset + Voice command ("call <contact name>") and I get two outcomes:
1. if phone is unlocked(even if screen is turned off), call is placed, I get audio in the Bluetooth headset - normal behavior.
2. if phone is locked(either auto-locked after timeout and screen off, or locked after pressing power button), call is placed after voice command, but audio remains on the phone and is not transferred to Bluetooth. I need to pick up the phone and talk from it, or press the "bluetooth" button on the dialer window.
Strange is that if I pick up the phone, while locked, and place a call using emergency/favorites contacts, I do get audio in the Bluetooth headset every time.
Problem is that hands free is not usable anymore, since you need to do something on the phone after placing the call.
I think that in your case, call being placed via car Bluetooth system, the thing should be the same.
What I can suggest is to try and see if this works in your case when phone is unlocked.
Anyway, Samsung screwed up something either related to the Phone app, or related to the lock-screen... or both
Solution would be to go back to 5.1.1 or wait for next update, hoping that Samsung fixes this...
Cheers!
ghisisan said:
Hi.
I think this is a general problem plaguing this update.
I have Plantronics E50 Headset. Worked great with 5.1.1.
I use headset as hands-free and usually place calls by holding button on headset for 2 seconds and then issuing voice command "call <contact name>".
This is not done via S Voice but via standard Google app voice.
Like said, all worked great, no issues in 5.1.1.
What I get now after the update to 6.0.1(also Poland 910C, yes, I wiped all after update, but still same behavior), is that I can place calls using the headset + Voice command ("call <contact name>") and I get two outcomes:
1. if phone is unlocked(even if screen is turned off), call is placed, I get audio in the Bluetooth headset - normal behavior.
2. if phone is locked(either auto-locked after timeout and screen off, or locked after pressing power button), call is placed after voice command, but audio remains on the phone and is not transferred to Bluetooth. I need to pick up the phone and talk from it, or press the "bluetooth" button on the dialer window.
Strange is that if I pick up the phone, while locked, and place a call using emergency/favorites contacts, I do get audio in the Bluetooth headset every time.
Problem is that hands free is not usable anymore, since you need to do something on the phone after placing the call.
I think that in your case, call being placed via car Bluetooth system, the thing should be the same.
What I can suggest is to try and see if this works in your case when phone is unlocked.
Anyway, Samsung screwed up something either related to the Phone app, or related to the lock-screen... or both
Solution would be to go back to 5.1.1 or wait for next update, hoping that Samsung fixes this...
Cheers!
Click to expand...
Click to collapse
Yes the same behavior on the Car audio system as you describe except that the audio system regardless of how the call originates from says "Privacy Mode Enabled" and you cannot hear anything or they hear you until you disable the Bluetooth or enable the speaker (that disconnects the Bluetooth)
I have downgraded to 5.1.1 official for my country and yesterday while driving home on the phone with my wife mid call it cut the voice and enabled "Privacy Mode". I could not call again or receive calls over the Car Audio and it persisted even after I rebooted the phone, Turned the radio on and off and even unpaired the phone and paired it again. The call regardless of where of how its made directly goes into "Privacy mode" and you cant disable it
I got home and turned the car off and on again and only when the audio system completely reset after pairing the phone again it could make calls from the phone and car without defaulting to the "Privacy Mode"
Dis is definitely a Android issue with the calling as its a feature in Android and not on the car audio. Music streaming works flawlessly that use the same Bluetooth connection. Its just on calls that it does this and at random