I just installed the BatteryStatus today plug in and it was working fine until i turned on the option to show the CPU speed. Then it just hung up. Now when I soft-reset it hangs when loading the today screen. Some of the plugins load but it hangs before BatteryStatus loads, probably while loading it. Any way I can get to my system to change that setting? I would prefer to not do a hard reset. But if I do, how do I do a hard reset?
Sounds like a hard reset to me....Hold down the two keys with the dot's on them next to your phone buttons and hit the reset button while pressing the reset switch and hold them down for a second or two longer. If you have a Memory card in on the 6800 I hear you may want to take it out if you don't want it cleared as well...good luck.
hmmm I went to do a hard reset... saw on another site that you press all the buttons and press reset. I pressed all the side buttons OK, Voice, On, Comm, Camera and hit the reset.
It went to a screen with red, green and blue (i think) bars and said USB at the bottom. Then I unplugged it from the USB and it switched to say serial. And it just stayed there. I didn't know what to do so I just soft reset it at that point. It then booted up and was working fine. Looks like the changes I made since the last soft reset had been cleared (I think) and it was now working fine and all my stuff was still on my phone (it doesnt look like it did a hard reset).
Was that not a hard reset that I did? or was it something else?
Sounds like you entered bootloader mode. I'm surrprised that a SOFT RESET took you back.......
You just did a Soft Reset from Bootloader mode, which to my knowledge is exactly the same as a regular Soft Reset.
A Hard Reset wil completely reset your device to original ROM status and wipe out all of your info/contacts/mail... ect.
If the Soft Reset fixed the problem then good deal.
I installed same app, had same problem and did hard reset. My problem was getting phone service working again. About 15 min. with VZW connection tech, entered a 26 digit number authentication key through EPST.exe system program to get my phone service back.
I also had the same problem as well. With a battery status deal like what your describing. All i did was soft reset a **** load of times and plug in my pw real fast and it came back. I have a scrolling task now that display all of it with 0 problems. I have it if you want it. Pm me your email.
Weird, I had tried a soft reset a few times and it kept coming back with the same thing, hanging halfway through loading the today screen. Maybe I just got lucky that time.
try this, i like alot with 0 problems
My GF's phone has a strange fault. After windows crashed she plugged it into the charger and the hard reset screen came up saying this will erase all your personal data etc.
No matter what I do I cannot get rid of this screen. Pressing enter does not complete the hard reset and attempting a hard reset has no effect. Soft reset has no effect either.
The phone has the official HTC wm6.1 update on it but i cannot get it to display exactly what rom's it has unfortunatley.
Has anyone had this problem or know how to fix it?
my screen alignment keep out running away for like 30% from the correct point. I couldnt do anything to align back the screen as the alignment run away too muchfor me to click on setting.
I have done soft and hard reset but couldnt help..
please advise
I think you will probably have to replace the digitizer, a hard reset to the standard rom should have cleared out any software/firmware hoobies, nothing left but hardware.
Still got warranty?
hello friends.
my Yota phone was put to charge at night and in the morning i saw that the back screen (e-ink) has frozen. it shows the wallpaper and the clock just wont change. i did a soft reset then a hard reset. the phone works fine but the back screen is just the same.
anyways i can get it back to work? any tips?
have you tried restarting the phone? taking out the battery for 30 secs? resetting to factory defaults?
pletko said:
have you tried restarting the phone? taking out the battery for 30 secs? resetting to factory defaults?
Click to expand...
Click to collapse
yes man. and as i said, i also tried soft rest, hard reset. the phone goes back to welcome screen but the e-ink display still remains frozen.
No water damaged
I just changed the camera with a original brand new one.
When ready the screen didn't switch on any longer.
Touch screen and everything else seems to work. Just the screen
I would like to Factory Reset before flashing a stock rom, to see if it will fix the pixel.
Any idea how can I factory reset it when the screen is black dead?
No need to factory reset the phone before flashing a stock ROM with Odin.