After updating to OOS 11.0. 1. 1.IN11AA I am not able to access the SIM and Network Settings of my In2025. Anybody has similar experience? Any ideas to work around this?
Hi. do you have a root phone?
Envoyé de mon IN2023 en utilisant Tapatalk
Zayatoshi said:
Hi. do you have a root phone?
Envoyé de mon IN2023 en utilisant Tapatalk
Click to expand...
Click to collapse
Yes. My phone is rooted with Magisk from the very day I bought it. I have not had this problem before. I realized it after doing the latest update last week.
Do you have any magisk modules installed, like Viper4?
Reboot if you haven't already.
I've seen some people lose WiFi when they've used a prior magisk patched boot img.
Perhaps try to use the most up to date boot img if this is what has happened.
If it's just gone on its own then that's odd.
Is your IMEI still present? *#06# in dialer, should be two. ( Don't post them here btw)
What OS are you on?
What model phone?
What magisk modules have you got installed??
Are you using Lucky Patcher?
I had the same problem with flashing a Viper4 module in magisk. Even after uninstalling the module the problem was not resolved. I had to use MSM tool to restore my 8 pro, and run procedure to unlock the bootloader and root again without twrp.
dladz said:
Reboot if you haven't already.
I've seen some people lose WiFi when they've used a prior magisk patched boot img.
Perhaps try to use the most up to date boot img if this is what has happened.
If it's just gone on its own then that's odd.
Is your IMEI still present? *#06# in dialer, should be two. ( Don't post them here btw)
View attachment 5142019
View attachment 5142021
What OS are you on?
What model phone?
What magisk modules have you got installed??
Are you using Lucky Patcher?
Click to expand...
Click to collapse
I am not using Lucky Patcher, my IMEIs are all present.
Any Magisk modules installed...
galaxys said:
Any Magisk modules installed...
Click to expand...
Click to collapse
OOS Native Call Recording Enabler.
cindybabe said:
OOS Native Call Recording Enabler.
Click to expand...
Click to collapse
Kill that, reboot, retest.
dladz said:
Kill that, reboot, retest.
Click to expand...
Click to collapse
That resolved it. Is there a native apk that can activate the call recording module without causing this problem? I think I read somewhere that call recording was available in Android 10 but updating to 11 removes it from the phone application. Thank you so much for the resolution.
cindybabe said:
That resolved it. Is there a native apk that can activate the call recording module without causing this problem? I think I read somewhere that call recording was available in Android 10 but updating to 11 removes it from the phone application. Thank you so much for the resolution.
Click to expand...
Click to collapse
No idea my call recording is built into the dialer? I think it's region dependent..
Use the thanks button btw.
Glad you're sorted :good:
Zayatoshi said:
I had the same problem with flashing a Viper4 module in magisk. Even after uninstalling the module the problem was not resolved. I had to use MSM tool to restore my 8 pro, and run procedure to unlock the bootloader and root again without twrp.
Click to expand...
Click to collapse
This is crazy.! It's a sound mod and I've always had sideways issues after installing/uninstalling it. Good to know
Related
Here the changelog
Note: security patch August
This update adds Highlights in Gallery and Moving picture in Camera.
Recommended level: ★★★★★
[What's new]
Adds Moving picture, enabling you to take dynamic photos in Standard mode.
Adds a feature to summarize your moments in an album and a video in Gallery.
Update notes:
1. This update will not erase your personal data, but we recommend that you back up any important data before updating.
2. If you experience any issues during the update, please call the Huawei customer service hotline or visit an authorized Huawei service center for assistance.
how can we get it on a stock phone if UPDATE doesnt find it ? i m on B182
sokos1 said:
how can we get it on a stock phone if UPDATE doesnt find it ? i m on B182
Click to expand...
Click to collapse
With the app Firmware Finder
Just flash the new MHA-L29C432B193 on my Mate 9 :good:
How can flash this update and what's the pros
albertobom said:
With the app Firmware Finder
Click to expand...
Click to collapse
Change DNS on phone and that's it?
No need for root/etc?
And it will stay stock and keep my nice sweet 3 years warantee?
I flashed it via HWOTA Methode without changing the dns server. I downloaded the files via FF on my pc and flash the files over my pc
How is the update? Worth it?
I can't authenticate it how did you get it to install?
arminbih said:
How is the update? Worth it?
Click to expand...
Click to collapse
Well security patch is up to date so I say yes.
arminbih said:
I can't authenticate it how did you get it to install?
Click to expand...
Click to collapse
Try this : https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108/page1
Well dload method folder on sd card does not work...
---------- Post added at 10:36 AM ---------- Previous post was at 10:21 AM ----------
Well no way to install unless you want to unlock bootloader or something, when I try dload method, and boot with volume + volume - power button it just says "software install failed the update package does not exist".
albertobom said:
Well security patch is up to date so I say yes.
Try this : https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108/page1
Click to expand...
Click to collapse
I got it to work, took the plunge and unlocked bootloader, seems this update is really good.
Feedback on 193 update, all good except apps sometimes close by itself few sec after you click it...
C432B193
I found a problem camera freezes and force closes (when you slide open raw format .)
newyesor said:
C432B193
I found a problem camera freezes and force closes (when you slide open raw format .)
Click to expand...
Click to collapse
Confirmed camera is unusable... Sad really that they can brake it like that.
newyesor said:
C432B193
I found a problem camera freezes and force closes (when you slide open raw format .)
Click to expand...
Click to collapse
arminbih said:
Confirmed camera is unusable... Sad really that they can brake it like that.
Click to expand...
Click to collapse
For the moment don't use raw mode
albertobom said:
For the moment don't use raw mode
Click to expand...
Click to collapse
190 is now certified might go back to that
Any of you who have B193 have Magisk?
I can't get SafetyNet to pass on this... Basic passes, CTS Profile does not.
All props look OK. I'm wondering if Huawei added something to prevent MagiskHide from working.
It was working fine on B190, aside from USB Debugging being a bit iffy. It wouldn't stay turned on and SafetyNet wouldn't pass if it wasn't (It's usually the other way around)
Hey the mirrorlink for Mate 9 pro is to soon for the futur update?
Envoyé de mon LON-L29 en utilisant Tapatalk
PIFS2 said:
Hey the mirrorlink for Mate 9 pro is to soon for the futur update?
Envoyé de mon LON-L29 en utilisant Tapatalk
Click to expand...
Click to collapse
What?
Did anybody using Magisk 16 on Honor 8? My main concern is the Magisk Hide and the safety checks...
Since Magisk 16 there are some support on Honor devices but in the real life I am not sure if is a point to going away from SuperSU...
It works fine. Supersu was taken over by a Chinese company. Chel stopped reviewing code for it. So unless you like your privacy, stick with supersu.
agraceful said:
It works fine. Supersu was taken over by a Chinese company. Chel stopped reviewing code for it. So unless you like your privacy, stick with supersu.
Click to expand...
Click to collapse
Everything is about privacy in this days...
Which is the last version of SuperSU, which was maintained by Chel?
So for privacy point is better Magisk. How is the privacy in Magisk? That's a big question
Which version of Magisk you're using? I have FRD-L09C432b394 but I am wondering if the Magisk Hide and the safety checks will work, because this s known problem with Honor/Huawei devices. I see the support from v16 for Honor devices but I don't know what's clearly mean that.
it's been working fine for me including safetynet. Interestingly, I have to keep USB debugging enabled to pass safetynet
jasonvxs4 said:
Interestingly, I have to keep USB debugging enabled to pass safetynet
Click to expand...
Click to collapse
THANK YOU, THANK YOU, THANK YOU!
I was looking everywhere as to why it was passing before the update to B404 and now was failing!
Flicked the option and passing safteynet again!
agraceful said:
It works fine. Supersu was taken over by a Chinese company. Chel stopped reviewing code for it. So unless you like your privacy, stick with supersu.
Click to expand...
Click to collapse
jasonvxs4 said:
it's been working fine for me including safetynet. Interestingly, I have to keep USB debugging enabled to pass safetynet
Click to expand...
Click to collapse
linkazoid said:
THANK YOU, THANK YOU, THANK YOU!
I was looking everywhere as to why it was passing before the update to B404 and now was failing!
Flicked the option and passing safteynet again!
Click to expand...
Click to collapse
What version of Magisk you're using on which firmware?
dewadi said:
What version of Magisk you're using on which firmware?
Click to expand...
Click to collapse
V16 on B404, was also using v16 on B403 too
I noticed earlier that my usb debugging was switching straight off after enabling. Make sure this isn't happening to you. Click the reset to default button at the bottom and then select it again
I'm using 16.3. Almost every single magisk version released has worked fine for me. Chel doesn't maintain it anymore. You can use an older version of supersu but I'm not sure why you'd want to do that. As far as usb debugging.. i always have that on anyway.. i have an L04 and I'm on 392 firmware. Magisk is much better. I was very very hesitant when I switched, specially since it wasn't at the state it is now, but I'm glad i switched.
linkazoid said:
V16 on B404, was also using v16 on B403 too
I noticed earlier that my usb debugging was switching straight off after enabling. Make sure this isn't happening to you. Click the reset to default button at the bottom and then select it again
Click to expand...
Click to collapse
agraceful said:
I'm using 16.3. Almost every single magisk version released has worked fine for me. Chel doesn't maintain it anymore. You can use an older version of supersu but I'm not sure why you'd want to do that. As far as usb debugging.. i always have that on anyway.. i have an L04 and I'm on 392 firmware. Magisk is much better. I was very very hesitant when I switched, specially since it wasn't at the state it is now, but I'm glad i switched.
Click to expand...
Click to collapse
Did you tried Magisk 16.4?
Sorry if I'm hijacking.
Since you're talking about 16.3 and 16.4, does Magisk hide works?
That was my previous problem with rooting. I would like to remove some apps and add AdAway, while using Google Pay.
zinko_pt said:
Sorry if I'm hijacking.
Since you're talking about 16.3 and 16.4, does Magisk hide works?
That was my previous problem with rooting. I would like to remove some apps and add AdAway, while using Google Pay.
Click to expand...
Click to collapse
Anyone have any clue about this?
zinko_pt said:
Anyone have any clue about this?
Click to expand...
Click to collapse
that's what I am running
jasonvxs4 said:
that's what I am running
Click to expand...
Click to collapse
Magisk hide working?
jasonvxs4 said:
it's been working fine for me including safetynet. Interestingly, I have to keep USB debugging enabled to pass safetynet
Click to expand...
Click to collapse
Thanks for this trick man! I was puzzled as to why I was failing the SN check after passing it for a few hours.
I will retry flashing Magisk 16 :good:
takichiman said:
Thanks for this trick man! I was puzzled as to why I was failing the SN check after passing it for a few hours.
I will retry flashing Magisk 16 :good:
Click to expand...
Click to collapse
Magisk 16.4 works fine with Hide and fingerprint sensor.
zinko_pt said:
Magisk 16.4 works fine with Hide and fingerprint sensor.
Click to expand...
Click to collapse
Thanks for the info. I will reflash magisk 16.4 on a fresh stock L04B395 ROM and update you if the Safetynet fails
takichiman said:
Thanks for the info. I will reflash magisk 16.4 on a fresh stock L04B395 ROM and update you if the Safetynet fails
Click to expand...
Click to collapse
Safetynet passes in my L09C432B405.
zinko_pt said:
Safetynet passes in my L09C432B405.
Click to expand...
Click to collapse
I confirm that it passes on my L04C567B395. But because of that stupid USB debugging option that keeps getting turned off, I have to continuously toggle/untoggle the option and eventually sometimes plugging the phone to a computer to trigger the adb, so I can pass the safetynet test.
For the record I'm using Magisk 16.4
linkazoid said:
THANK YOU, THANK YOU, THANK YOU!
I was looking everywhere as to why it was passing before the update to B404 and now was failing!
Flicked the option and passing safteynet again!
Click to expand...
Click to collapse
WOW finally pass the safetynet!!!
Thanks alot!! I'm using magisk v17.1 with h8 frd10, what a magic!:highfive:
Everyone on the beta, check for system update ?
thank you for the info. i just done,install it. [emoji3]
Sent from my [device_name] using XDA-Developers Legacy app
smooth update: just removed the -w from flash-all script, booted once, went back to TWRP to flash latest Flash Kernel + Magisk.
Fails safety net for me no more Google pay
1. Can I flash this (removing -w) over july 8.1.0 and keep all my apps and settings?
2. Is it already good enough as a daily driver?
r3act said:
1. Can I flash this (removing -w) over july 8.1.0 and keep all my apps and settings?
2. Is it already good enough as a daily driver?
Click to expand...
Click to collapse
Yes and yes
Sent from my Pixel 2 using Tapatalk
Thanks! One more noobish question. Can I revert to a full TWRP backup (including vendor etc) if for some reason I want to revert back to stock 8.1?
r3act said:
Thanks! One more noobish question. Can I revert to a full TWRP backup (including vendor etc) if for some reason I want to revert back to stock 8.1?
Click to expand...
Click to collapse
You will need to perform a full backup, transfer the twrp folder to PC, flash vendor image, then flash twrp,then transfer over backup to restore.
After two cycles from 100-0. With latest ElementalX kernel and Helix engine.
danbrown162 said:
Fails safety net for me no more Google pay
Click to expand...
Click to collapse
have you tried to install a custome kernel? if i remember right, it should be enough to install a kernel for that..
I flashed it and in my enthousiasm forgot to remove the -w so it became a clean install...
DP4 is already a major upgrade over 8.1.0 with lots of new features. The portrait mode in the new camera app is great and also no intermittent wifi drops anymore.
Indeed its good enough as a daily driver so I'm staying on it now.
Xposed and v4a working?
Sent from my Pixel 2 using my fingers on the keyboard.
shortyboy said:
After two cycles from 100-0. With latest ElementalX kernel and Helix engine.
Click to expand...
Click to collapse
is safety net working for you?
thanks!
Safety net not working for me either.
jasonbiggs said:
Xposed and v4a working?
Sent from my Pixel 2 using my fingers on the keyboard.
Click to expand...
Click to collapse
I couldn't get Xposed to install, but V4A is working great. Safety net also is not passing for me, I'm using latest Flash kernel.
Thanks guys, then I'll wait untill we find a solution for safety net, Google pay is a priority for me
daede86 said:
is safety net working for you?
thanks!
Click to expand...
Click to collapse
safety new is not working with latest magisk 16.6
r3act said:
I flashed it and in my enthousiasm forgot to remove the -w so it became a clean install...
DP4 is already a major upgrade over 8.1.0 with lots of new features. The portrait mode in the new camera app is great and also no intermittent wifi drops anymore.
Indeed its good enough as a daily driver so I'm staying on it now.
Click to expand...
Click to collapse
What's new about the portrait mode on DP4?
daede86 said:
Thanks guys, then I'll wait untill we find a solution for safety net, Google pay is a priority for me
Click to expand...
Click to collapse
I'm using the element kernel for Android P and safety net is passing for me. That said, I haven't re-rooted the device as of yet so I'm just unlocked currently.
Safety net is working for me on Magisk 16.6, and latest ElementalX kernel.
Has anyone tried to flash the new Beta update to the OnePlus 6T TMobile version? Does it still give the same error "Build Version does not match Hardware version"?
bigmikey307 said:
Has anyone tried to flash the new Beta update to the OnePlus 6T TMobile version? Does it still give the same error "Build Version does not match Hardware version"?
Click to expand...
Click to collapse
I just downloaded and installed the open beta 2 and it's great! I'm going to give it a week and "test the engine and tires." I still have my Pie firmware, just in case.
NOTE: I installed using the local update method. I was rooted also with pie.
Main OP question was if you flash android 10 via zip and tried flashing beta on top to see if it works like it did on android 9. Please let me know if anyone tried this as well. Thank you in advance.
bigmikey307 said:
Has anyone tried to flash the new Beta update to the OnePlus 6T TMobile version? Does it still give the same error "Build Version does not match Hardware version"?
Click to expand...
Click to collapse
No 'build version does not match hardware version' error when flashing the new beta to TMO converted one plus 6t. I used TWRP 3.3.1.28 and all is good.
We still don't have the "reserve" partition though. OnePlus fonts will be missing and show up as italic fonts. A few apps are also gone but can be installed from play store. You wont pass Safety net so you will miss out on Netflix, etc.
No F/C's. Not sure on battery yet.
Everything else does seem good! I am enjoying it!
Scott said:
We still don't have the "reserve" partition though. OnePlus fonts will be missing and show up as italic fonts. A few apps are also gone but can be installed from play store. You wont pass Safety net so you will miss out on Netflix, etc.
No F/C's. Not sure on battery yet.
Everything else does seem good! I am enjoying it!
Click to expand...
Click to collapse
You can use the reserve partition magisk module...
justforgot said:
Main OP question was if you flash android 10 via zip and tried flashing beta on top to see if it works like it did on android 9. Please let me know if anyone tried this as well. Thank you in advance.
Click to expand...
Click to collapse
I used patched MSM tool to get TMobile variant to international ROM without unlocking bootloader and then I local upgraded to Android 10 stable, then local upgraded to OB 2 and all is well!
So I'm on Android 10 Stable with bootloader unlocked. What happens if I relock bootloader? Will I go into bootloop on restart, and will it get rid of the warning on restart, or do I need to do what @bigmikey307 did?
Update : I did the above but didn't go to beta 2
PapaMag said:
So I'm on Android 10 Stable with bootloader unlocked. What happens if I relock bootloader? Will I go into bootloop on restart, and will it get rid of the warning on restart, or do I need to do what @bigmikey307 did?
Update : I did the above but didn't go to beta 2
Click to expand...
Click to collapse
didn't understood what you meant about "didn't go to beta 2"...
for beta you need to flash via local update since you're on the official update yet. link is on the beta thread or on the Oxygen Updater app from playstore
TJSteveMX said:
didn't understood what you meant about "didn't go to beta 2"...
for beta you need to flash via local update since you're on the official update yet. link is on the beta thread or on the Oxygen Updater app from playstore
Click to expand...
Click to collapse
I just meant I stopped at 10.0 and didn't local upgrade to beta yet
Any word on the Play Protect Certification issue on T-Mo devices? I've been getting by without it on the Stable release, but I'll definitely go Beta of this update resolves the issue.
taylor85345 said:
Any word on the Play Protect Certification issue on T-Mo devices? I've been getting by without it on the Stable release, but I'll definitely go Beta of this update resolves the issue.
Click to expand...
Click to collapse
Nope, not certified. Someone posted some links in the Official Stable thread with instructions on how to do it using root and some magisk modules.
taylor85345 said:
Any word on the Play Protect Certification issue on T-Mo devices? I've been getting by without it on the Stable release, but I'll definitely go Beta of this update resolves the issue.
Click to expand...
Click to collapse
So like @Scott Mentioned, it requires root to pass at the moment. The Magisk mod is called Magiskhide props config and it works perfectly well as a workaround. Good luck!
Sent from my OnePlus6T using XDA Labs
I'm probably overlooking something obvious but I have no idea what it is.
Here's the story; I have a T-Mobile OP6t converted to International.
Flashed the update to OB31 (Open Beta 2).
I have Magisk and Titanium Backup installed, both with root access allowed.
However, I'm unable to get TB to actually uninstall some of the system apps I don't want.
Also, I can't copy and paste (via Solid Explorer) my edited HOSTS file to block ads.
What am I missing?
Scott said:
We still don't have the "reserve" partition though. OnePlus fonts will be missing and show up as italic fonts. A few apps are also gone but can be installed from play store. You wont pass Safety net so you will miss out on Netflix, etc.
No F/C's. Not sure on battery yet.
Everything else does seem good! I am enjoying it!
Click to expand...
Click to collapse
What is the reserve partition? And do I need it/want it?
cultofluna said:
You can use the reserve partition magisk module...
Click to expand...
Click to collapse
Do you have a link?
Scott said:
Do you have a link?
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=1899786940962618515
Scott said:
We still don't have the "reserve" partition though. OnePlus fonts will be missing and show up as italic fonts. A few apps are also gone but can be installed from play store. You wont pass Safety net so you will miss out on Netflix, etc.
No F/C's. Not sure on battery yet.
Everything else does seem good! I am enjoying it![/QUOTE @Scott , which apps are you referring to?
Sent from my ONEPLUS 6T using Tapatalk Pro.
If I've helped you out, please tap the thanks button.
Click to expand...
Click to collapse
xRogerxC said:
@Scott , which apps are you referring to?
Sent from my ONEPLUS 6T using Tapatalk Pro.
If I've helped you out, please tap the thanks button.
Click to expand...
Click to collapse
The OP Weather app for instance, the OP square and round icon packs, e few more that I dont recall. All of them could be downloaded from the play store. You only need the font fox magisk module referenced earlier in this thread. You wont notice these missing apps on a dirty install but you will see it on a clean install or factory reset.
Reinstalling the ROM ZIP via in-built updater fixes the issue. Done it multiple times.
Anybody install this yet?
jimlightner said:
Anybody install this yet?
Click to expand...
Click to collapse
I have been running 10.3 for a while and I am t-mobile locked but converted to International. Everything is smooth other than Gpay is not working and Playstore is not certified. This is because I am t-mobile variant.
jimlightner said:
Anybody install this yet?
Click to expand...
Click to collapse
Yes! I've been installed for a few weeks. All perfect.
Enviado desde mi ONEPLUS A6013 mediante Tapatalk
I too got a push update notification. My question is this, can I update through the regular method as it's a full update or do I need to flash?
Originally t mobile variant I rebranded to international and sim unlocked. Also flashed to 9.0.17 and rooted via magisk. Any insight would be appreciated as I have heard improper updating can result in a brick. Thanks in advance
BoSavageYo said:
I too got a push update notification. My question is this, can I update through the regular method as it's a full update or do I need to flash?
Originally t mobile variant I rebranded to international and sim unlocked. Also flashed to 9.0.17 and rooted via magisk. Any insight would be appreciated as I have heard improper updating can result in a brick. Thanks in advance
Click to expand...
Click to collapse
Just do a local upgrade. Just follow the guide to save root.
jimlightner said:
Anybody install this yet?
Click to expand...
Click to collapse
Everybody has installed it... It's been out for days
Went for it yesterday. With an "ultimate guide" here on forum. I was 9.0.17 rooted with twrp description problems. So I downloaded update (1.8Gb) from official One+ site. And did local update, and all the steps to keep root. After finally booting up I got message that Magisk Manager stopped working, but everything was fine. So cleared app temp memory, and settings (for Magisk only) and next boot everything was ok.
Nope... 100% stock, 9.0.17 is ROCK solid, g-pay, samsung pay work perfectly & there really isn't anything in 10 I can't live without yet. So, I
see no need to update for now.
I'm also not updating yet, at least until they fix the keyboard offset issue and other things I've read about.
Luckily you can just freeze the system update app with Titanium.
sssarg said:
I'm also not updating yet, at least until they fix the keyboard offset issue and other things I've read about.
Luckily you can just freeze the system update app with Titanium.
Click to expand...
Click to collapse
There is no keyboard offset issue and so therefore it's never getting fixed. Designs can change, but there isn't going to be a fix for something that isn't a problem.
Causical said:
There is no keyboard offset issue and so therefore it's never getting fixed. Designs can change, but there isn't going to be a fix for something that isn't a problem.
Click to expand...
Click to collapse
Judging by all the people complaining about the empty space under the keyboard it does seems to be a problem, though.
sssarg said:
Judging by all the people complaining about the empty space under the keyboard it does seems to be a problem, though.
Click to expand...
Click to collapse
There is a Magisk module to deal with that (immersive gestural Navigation for Android 10), and an adb command to change the size of the space. It's a deliberate thing from Google so they'll perhaps remove it later or no but staying with Pie just for that.....
Causical said:
There is no keyboard offset issue and so therefore it's never getting fixed. Designs can change, but there isn't going to be a fix for something that isn't a problem.
Click to expand...
Click to collapse
It's not a bug, it's there for the swipe gesture, so that way you won't swipe the keypad when using gestures
Sent from my LG-G8 using Tapatalk
Question of the day. I've been waiting to do the A10 update for the issues it showed on the first days. I'm on a converted 6T from TMo, running 9.0.17. my major concern is the GPay thing I use it a lot. But researching here there's a way to make it work if I root the device. So can I update to 10.3.0 then root to get the GPay issue resolved with the Hide module on magisk? Or should I root on Pie then update?
phillymade said:
It's not a bug, it's there for the swipe gesture, so that way you won't swipe the keypad when using gestures
Sent from my LG-G8 using Tapatalk
Click to expand...
Click to collapse
This is pretty bad ux experience, and with the amount of complaints it seems and accidental keypress possibly when swiping is much better than losing all the text and keyboard closing with an accidental touch. At least give us the option to move it down, without having to go into ADB and setting an offset that then interferes with the way all apps render.