Database Users

[GUIDE] How to get Magisk Root & Xposed on Oreo 8.0 (STOCK)

I'M NOT RESPONSIBLE IF YOUR DEVICE BRICKS, SD CARD DAMAGES OR NUCLEAR WAR STARTS.
Rooting method described below will work on Oreo-running devices ONLY (confirmed on build OPN27.76-12-22 and on OPNS27.76-12-22-9).
Please follow all steps very carefully and make sure you downloaded correct versions of all .zip files mentioned in my instruction!
ROOT (SafetyNet test will PASS!)
1. Download all files listed below:
- twrp-3.2.3-0-addison.img (CLICK)
- Magisk-v17.1.zip or newer if availabe (CLICK)
- f2fsfix-2018.9.2.zip (CLICK)
2. Flash TWRP using Fastboot:
Code:
fastboot flash recovery twrp-3.2.3-0-addison.img
3. Flash Magisk-v17.1.zip (or newer if available).
4. Go to TWRP/Settings and open Terminal.
5. Run both of following commands:
Code:
echo KEEPVERITY=true>>/data/.magisk
echo KEEPFORCEENCRYPT=true>>/data/.magisk
6. Flash f2fsfix-2018.9.2.zip
7. Reboot (it is crucial in case of installing Xposed afterwards).
8. Optional but recommended: update your Magisk Manager to the latest version (CLICK).
9. Open Magisk -> Modules and update f2fs-loopback-bug-workaround module to the newest version (can be done only via Magisk Manager only if new version of f2fs-loopback-bug-workaround module is available).
10. Enjoy rooted Oreo.
UPDATE 03.10.2018
If you flashed everything as described in OP and noticed that you got stuck in boot, go to TWRP again and:
1. Uninstall Magisk using latest Magisk uninstaller.
2. Flash Magisk 17.1.zip AGAIN (yes.).
3. Flash f2fsfix-2018.9.2.zip
4. Enjoy rooted phone.
PS. I do not know why device does not start after first flashing to be honest, but these four steps above are confirmed by several users (and by me).
UPDATE 03.10.2018
XPOSED (be careful: Xposed for Oreo is still in BETA distribution and flashing it will break your SafetyNet!)
1. Open Magisk Manager -> Downloads.
2. Download Xposed Installer (the one from the screen below):
https://image.ibb.co/byLUuK/Xposed_Framework.png
3. Let Magisk install it.
4. Reboot.
5. Open Xposed Installer (you will see orange exclamation mark, don't worry).
6. Reboot once again.
7. Voila.
Hit THANKS if I helped!
Credits:
- @topjohnwu
- @rovo89
- @Artim_96
- @VR25

@rafikowy ah, so basically the problem was with dm-verity and forced encryption? That makes sense. So it would basically also work if you'd not extract the boot.img from the OTA zip and mod it with Magisk manager with both enabled and flash that (might be easier than flashing normal Magisk and then make the changes), so you'd basically just flash the img and the module zip in TWRP.
Well, if no bigger bugs appear I might try the Oreo OTA and root tomorrow. Don't think it will be here on its own till then, even if it's already the official rollout (Indian and brasilian users seem to get it officially)

First magisk manager did not want to open, but a reboot solved. thanks

So, Lenovorola is still "undecided" in regards to patching F2FS.
I wonder why...

Where can I find the firmware or OTA to update Oreo on my 1635-02 with Android 7.1.1 Patch December? Is possible back to Stock Oreo or Nougat?

Necrodaemon said:
Where can I find the firmware or OTA to update Oreo on my 1635-02 with Android 7.1.1 Patch December? Is possible back to Stock Oreo or Nougat?
Click to expand...
Click to collapse
Only a Soak test is available, the link is in the thread in the ROM section. And yes, it doesn't seem to update your bootloader, it was already successfully testet to go back to 7.1.1

Necrodaemon said:
Where can I find the firmware or OTA to update Oreo on my 1635-02 with Android 7.1.1 Patch December? Is possible back to Stock Oreo or Nougat?
Click to expand...
Click to collapse
Look at
https://forum.xda-developers.com/mo...se-attempt-t3812530/post76991120#post76991120

not work - moto z play - oreo soak
Unfortunately it does not work. : (TWRP prompts for a PIN to decrypt data.) How to select cancel and install Magisk on installation f2fs-loopback-bug-workaround-2018.1.31.zip displays an error that does not detect magisk or is incompatible. How do I format the date everything is installed but the phone does not turn on... Any idea?

Sorry but, if verity is enabled, that means you are unable to modify /system files?

Necrodaemon said:
Where can I find the firmware or OTA to update Oreo on my 1635-02 with Android 7.1.1 Patch December? Is possible back to Stock Oreo or Nougat?
Click to expand...
Click to collapse
You can go back, problem is you will lose IMEI by going back to Nougat.

huma_dawii said:
You can go back, problem is you will lose IMEI by going back to Nougat.
Click to expand...
Click to collapse
I gone back to 7.1.1 Nov patch and everything is OK with my IMEI. Just flash 7.1.1 Plus ROM with TWRP. One issue what I have - In can't mount OEM partition in TWRP.

Could someone provide a TWRP backup of the 8.0 Soak? I've modified the system partition and this method stoped working. All the 8.1 roms have a so bugged camera, I don't wanna go back to them

Camarda said:
Could someone provide a TWRP backup of the 8.0 Soak? I've modified the system partition and this method stoped working. All the 8.1 roms have a so bugged camera, I don't wanna go back to them
Click to expand...
Click to collapse
Here are system and boot from 8.0 soak test. Just unrar it adn put to TWRP folder with your backups.

St.Noigel said:
Here are system and boot from 8.0 soak test. Just unrar it adn put to TWRP folder with your backups.
Click to expand...
Click to collapse
I've restored the backup, but I'm still unable to boot with magisk. Don't know what is wrong now

Camarda said:
I've restored the backup, but I'm still unable to boot with magisk. Don't know what is wrong now
Click to expand...
Click to collapse
1. Restore backup
2. Flash Magisk 15.3
3. Flash this https://forum.xda-developers.com/apps/magisk/guide-magisk-official-version-including-t3577875
4. Flash this https://forum.xda-developers.com/apps/magisk/module-tool-magisk-manager-recovery-mode-t3693165
5. Go to the terminal in TWRP and run two commands:
- mm
- f
Reboot.
That's all. You don't need to run commands from OP.
IF I help you - you can buy me a beer )))))

Can i go back to 7.1.1 and relock bootloader ??
Hi,
Can anyone help me, i have updated to Oreo (Soak Update) and now i wanna go back to Nougat 7.1.1 NPNS26.118-22-2-12 and re-lock bootloader, is it possible ?? if yes guide me
thanks in advance

LovinVEVO said:
Hi,
Can anyone help me, i have updated to Oreo (Soak Update) and now i wanna go back to Nougat 7.1.1 NPNS26.118-22-2-12 and re-lock bootloader, is it possible ?? if yes guide me
thanks in advance
Click to expand...
Click to collapse
Nope. It's impossible for now. You can`t go back to full stock, because you'll lose your IMEI with flashing full 7.1.1 FW with RSD or fastboot.

St.Noigel said:
1. Restore backup
2. Flash Magisk 15.3
3. Flash this https://forum.xda-developers.com/apps/magisk/guide-magisk-official-version-including-t3577875
4. Flash this https://forum.xda-developers.com/apps/magisk/module-tool-magisk-manager-recovery-mode-t3693165
5. Go to the terminal in TWRP and run two commands:
- mm
- f
Reboot.
That's all. You don't need to run commands from OP.
IF I help you - you can buy me a beer )))))
Click to expand...
Click to collapse
Did everything, but still stuck at bootanimation. Only boots if I unninstall magisk.

Camarda said:
Did everything, but still stuck at bootanimation. Only boots if I unninstall magisk.
Click to expand...
Click to collapse
If you have bootanimation - just wait few minutes

St.Noigel said:
If you have bootanimation - just wait few minutes
Click to expand...
Click to collapse
Just waited for 30 minutes. It wont boot

Help! OTA Update 9.0.7 Now Magisk missing Safetynet

I installed update and now can no longer do Safetynet the option is missing in Magisk.
Also the wifi and modem does not work either. This only happened after updating to the new OTA.

Maybe This Will Help:
molitar said:
I installed update and now can no longer do Safetynet the option is missing in Magisk.
Also the wifi and modem does not work either. This only happened after updating to the new OTA.
Click to expand...
Click to collapse
So i just got the phone three days ago but maybe try rebooting your phone to TWRP or if you don't have it installed on your recovery go to a computer and launch ADB, what you want to do is temp boot into TWRP then sideload Magisk again.
To make things easier:
=============================
1. Boot into TWRP (Either through recovery or ADB)
2. Get your yourself the stock boot.img to clear things up on Magisk's end.
3. Sideload your Magisk zip.
4. Clear cache and dalvik cache
5. Reboot the phone.
If you don't flash a stock.img of the current OOS you are on safetynet may fail but reinstalling Magisk through TWRP should fix your safetynet issue. As far as WIFI goes try flashing the modem.img file for your current OOS version, this might do the trick but i am not so sure as this is my first time using a oneplus device.
Hope i have helped you out. Don't take OTAs, they break root as an OTA is just for stock OOS with no root so there is no support for rooted devices when it comes to these updates.
Edit: Try this if it doesn't work https://forum.xda-developers.com/oneplus-6t/how-to/9-0-7-patched-magisk-boot-img-t3875498

ROOT67 said:
So i just got the phone three days ago but maybe try rebooting your phone to TWRP or if you don't have it installed on your recovery go to a computer and launch ADB, what you want to do is temp boot into TWRP then sideload Magisk again.
To make things easier:
=============================
1. Boot into TWRP (Either through recovery or ADB)
2. Get your yourself the stock boot.img to clear things up on Magisk's end.
3. Sideload your Magisk zip.
4. Clear cache and dalvik cache
5. Reboot the phone.
If you don't flash a stock.img of the current OOS you are on safetynet may fail but reinstalling Magisk through TWRP should fix your safetynet issue. As far as WIFI goes try flashing the modem.img file for your current OOS version, this might do the trick but i am not so sure as this is my first time using a oneplus device.
Hope i have helped you out. Don't take OTAs, they break root as an OTA is just for stock OOS with no root so there is no support for rooted devices when it comes to these updates.
Click to expand...
Click to collapse
How do you install ota when rooted?

worldsoutro said:
How do you install ota when rooted?
Click to expand...
Click to collapse
I uninstalled magisk, did the regular OTA update, do not reboot, then install Magisk again on the inactive slot.
Ok fixed the problem I was having.. I had to do a complete factory wipe after installing Magisk. It's now working and I am using Oneplus Switch to restore my data backup now.

worldsoutro said:
How do you install ota when rooted?
Click to expand...
Click to collapse
See in OTA thread in general guide news section, procedure is clearly written

molitar said:
I uninstalled magisk, did the regular OTA update, do not reboot, then install Magisk again on the inactive slot.
Ok fixed the problem I was having.. I had to do a complete factory wipe after installing Magisk. It's now working and I am using Oneplus Switch to restore my data backup now.
Click to expand...
Click to collapse
Glad to hear it worked out for you.

How to install twrp temporarily?

My stock rom has a wifi problem and I want to flash a fix via twrp, but I still want to obtain ota updates. Is booting into twrp via command prompt temporary? Like once I exit twrp without flashing installer zip it would be gone, right?
Sorry, for the noob question. I'm still new to a/b devices.

Try
fastboot boot twrp (the name of your twrp-image)
I am using this all the time to uninstall / install magisk and do an OTA-update inbetween

Tiemichael said:
Try
fastboot boot twrp (the name of your twrp-image)
I am using this all the time to uninstall / install magisk and do an OTA-update inbetween
Click to expand...
Click to collapse
There won't be any problems with stock pie, right?

As I need Xposed, I have not tried PIE yet.
If you are worried trying PIE, flash OREO (Nov 2018) and then do an OTA-update before rooting with TWRP and MAGISK

Tiemichael said:
As I need Xposed, I have not tried PIE yet.
If you are worried trying PIE, flash OREO (Nov 2018) and then do an OTA-update before rooting with TWRP and MAGISK
Click to expand...
Click to collapse
I'm on latest Jan patch. :/

WhatzIt2Ya said:
There won't be any problems with stock pie, right?
Click to expand...
Click to collapse
I think theres only one TWRP version which will work with Pie.

How to update to the latest version?

Ok so i'm running now OOS Stable 10.0 with TWRP running, and Magisk ofc.
Now, i used this guide -
https://forum.xda-developers.com/oneplus-6t/how-to/guide-how-to-twrp-data-decryption-t3995861
To update from 9.0.17 to 10.0
But never tried to update from 10.0.
Can i update like the usual process ?
Enter Recovery > Flash ROM > Flash TWRP > Flash Magisk ?
Or i need to do it differently .
Edit : I want to update from 10.0 to OB3.

yot2703 said:
Ok so i'm running now OOS Stable 10.0 with TWRP running, and Magisk ofc.
Now, i used this guide -
https://forum.xda-developers.com/oneplus-6t/how-to/guide-how-to-twrp-data-decryption-t3995861
To update from 9.0.17 to 10.0
But never tried to update from 10.0.
Can i update like the usual process ?
Enter Recovery > Flash ROM > Flash TWRP > Flash Magisk ?
Or i need to do it differently .
Edit : I want to update from 10.0 to OB3.
Click to expand...
Click to collapse
Why would it be different?
It seems complicated enough for people to catch up with only one logical method, I dare not imagine what it would be if there were different procedures....

yot2703 said:
Enter Recovery > Flash ROM > Flash TWRP > Flash Magisk ?
Click to expand...
Click to collapse
If you do it this way make sure you update to the latest version of TWRP that was released today (3.3.1-30) before upgrading the ROM.

Open magisk manager and restore boot.img.
Update locally in system settings.
Dont reboot.
Install magisk to inactive slot in magisk manager.
Reboot and provit.
No need for twrp.

Striatum_bdr said:
Why would it be different?
It seems complicated enough for people to catch up with only one logical method, I dare not imagine what it would be if there were different procedures....
Click to expand...
Click to collapse
There are people updating with local update.
alryder said:
If you do it this way make sure you update to the latest version of TWRP that was released today (3.3.1-30) before upgrading the ROM.
Click to expand...
Click to collapse
Update it via Magisk?
bokkoman said:
Open magisk manager and restore boot.img.
Update locally in system settings.
Dont reboot.
Install magisk to inactive slot in magisk manager.
Reboot and provit.
No need for twrp.
Click to expand...
Click to collapse
I still want TWRP , Flash it over Magisk?
And can you provide me the boot.img? 10.0

yot2703 said:
There are people updating with local update.
Update it via Magisk?
I still want TWRP , Flash it over Magisk?
And can you provide me the boot.img? 10.0
Click to expand...
Click to collapse
And why would you need TWRP?
You don't need boot.img. Magisk automatically backups the original boot.img and patches it. That way you can restore it thru magisk manager. And patch the new boot.img (install to in-active slot) after local upgrade.

bokkoman said:
And why would you need TWRP?
You don't need boot.img. Magisk automatically backups the original boot.img and patches it. That way you can restore it thru magisk manager. And patch the new boot.img (install to in-active slot) after local upgrade.
Click to expand...
Click to collapse
I'm trying this guide
https://forum.xda-developers.com/oneplus-6t/how-to/guide-how-to-update-to-op6t-ob3-q-t4021299

yot2703 said:
I'm trying this guide
https://forum.xda-developers.com/oneplus-6t/how-to/guide-how-to-update-to-op6t-ob3-q-t4021299
Click to expand...
Click to collapse
Well, that doesn't answer the question: why do you need TWRP?

The problem is that you ask for a recipe, without knowing clearly what you're doing when applying the recipe.
Yes you can update with local update while keeping Magisk and twrp. See first posts of OOS 10.0.1 thread in Guide section.
Yes you can update from within twrp, the way ROMs are fleshed since nearly a decade
Yes you can flash twrp with Magisk manager, since months it's a basic knowledge.
No you don't need stock boot.img
Don't follow the guide you quote WHICH WAS WRITTEN WHEN NO WORKING TWRP was available for A10. It's outdated now. Use regular and classical procedures

bokkoman said:
Well, that doesn't answer the question: why do you need TWRP?
Click to expand...
Click to collapse
Flash other zips and kernels?

yot2703 said:
Flash other zips and kernels?
Click to expand...
Click to collapse
Alright, well then it is useful.
IMHO, i recommend using stock OOS and root only. Because it already is a great rom. You can flash certain extras with magisk manager anyway.
But whatever rows your boat

Striatum_bdr said:
The problem is that you ask for a recipe, without knowing clearly what you're doing when applying the recipe.
Yes you can update with local update while keeping Magisk and twrp. See first posts of OOS 10.0.1 thread in Guide section.
Yes you can update from within twrp, the way ROMs are fleshed since nearly a decade
Yes you can flash twrp with Magisk manager, since months it's a basic knowledge.
No you don't need stock boot.img
Don't follow the guide you quote WHICH WAS WRITTEN WHEN NO WORKING TWRP was available for A10. It's outdated now. Use regular and classical procedures
Click to expand...
Click to collapse
Well now i'm stuck with no twrp. how to flash it ?

yot2703 said:
Well now i'm stuck with no twrp. how to flash it ?
Click to expand...
Click to collapse
The answer is in the post you quoted:
'Yes you can flash twrp with Magisk manager, since months it's a basic knowledge"
What I did was open Magisk Manager - go to Modules - click Add (+) - select the TWRP installer (zip) - exit Magisk Manager - reboot to TWRP - reinstall Magisk.
There might be a way to reinstall Magisk from Magisk Manager to the active slot but I'm not sure so I did it through TWRP.

updating to latest OTA 11.0.1.1.IN11AA

I have unlocked bootloader + root with magisk. Is there anything special I need to do before letting the OTA update? What about afterwards, will I need to re root?
Sorry if this question was already asked and answered- I couldn't find anything. Just want to make sure I'm not doing anything stupid, thanks in advance.
For clarity I'm on the latest magisk canary and am using a U.S. phone.

cubeplayer1 said:
I have unlocked bootloader + root with magisk. Is there anything special I need to do before letting the OTA update? What about afterwards, will I need to re root?
Sorry if this question was already asked and answered- I couldn't find anything. Just want to make sure I'm not doing anything stupid, thanks in advance.
For clarity I'm on the latest magisk canary and am using a U.S. phone.
Click to expand...
Click to collapse
Update using local, dont reboot - go to magisk; install to inactive slot(after OTA) *disable module to be safe - Then restart

cubeplayer1 said:
I have unlocked bootloader + root with magisk. Is there anything special I need to do before letting the OTA update? What about afterwards, will I need to re root?
Sorry if this question was already asked and answered- I couldn't find anything. Just want to make sure I'm not doing anything stupid, thanks in advance.
For clarity I'm on the latest magisk canary and am using a U.S. phone.
Click to expand...
Click to collapse
If you're on ob3 I read that it needs to wipe, if you're on 11.0.0 stable then just update, don't reboot, disable magisk modules, patch after OTA in magisk and that's it

dladz said:
If you're on ob3 I read that it needs to wipe, if you're on 11.0.0 stable then just update, don't reboot, disable magisk modules, patch after OTA in magisk and that's it
Click to expand...
Click to collapse
Sounds easy enough. Should I also worry about flashing back to stock kernel as well?

cubeplayer1 said:
Sounds easy enough. Should I also worry about flashing back to stock kernel as well?
Click to expand...
Click to collapse
If you update then the kernel gets done too.
If you have modules installed disable them first.
You'll be fine.
PS: so are you on ob3 or 11 stable?

I'm rooted with an unlocked bootloader on 11.IN11AA (Global). How do I perform a local upgrade without the OTA file to put into the root folder? It seems like the Global version of the OTA file is nowhere to be found and I can't download it via System Update since it fails due to root. Do we need to just wait for the 11.0.1.1.IN11AA OTA zip file to be posted? Thanks in advance.

Yes, looks like we are in waiting mode for it to show up...

dladz said:
If you update then the kernel gets done too.
If you have modules installed disable them first.
You'll be fine.
PS: so are you on ob3 or 11 stable?
Click to expand...
Click to collapse
Stable. Haven't done the update yet because I'm getting "installation problem" when I try to download OTA. Oxygen updater not working either. Not sure what's up lol but I'm over it. Guess I gotta go find the file and install locally.

cubeplayer1 said:
Stable. Haven't done the update yet because I'm getting "installation problem" when I try to download OTA. Oxygen updater not working either. Not sure what's up lol but I'm over it. Guess I gotta go find the file and install locally.
Click to expand...
Click to collapse
You'd have to install locally even with oxygen updater.

galaxys said:
Yes, looks like we are in waiting mode for it to show up...
Click to expand...
Click to collapse
Yea I guess that's why Oxygen Updater isn't showing anything new for me. Once it shows up on the internet, I'm sure the OU app will refresh and show an available update.

cubeplayer1 said:
I have unlocked bootloader + root with magisk. Is there anything special I need to do before letting the OTA update? What about afterwards, will I need to re root?
Sorry if this question was already asked and answered- I couldn't find anything. Just want to make sure I'm not doing anything stupid, thanks in advance.
For clarity I'm on the latest magisk canary and am using a U.S. phone.
Click to expand...
Click to collapse
For those with trouble installing 11.0.1.1 AA update with root as Google server only pushed incremental OTA at the moment.
1. Flash your current version unpatched boot.img into both slots in fastboot
2. Use the following command to boot from a patched boot, but not modifying the partitions. (fastboot boot patched.img)
3. Update with system updater with incremental ota.
4. Don't reboot, but flash the magisk with magisk app to the inactive slot.
5. Reboot and done.

cubeplayer1 said:
Stable. Haven't done the update yet because I'm getting "installation problem" when I try to download OTA. Oxygen updater not working either. Not sure what's up lol but I'm over it. Guess I gotta go find the file and install locally.
Click to expand...
Click to collapse
I just updated and kept root. I used to use this method on my Pixel 2 XL when I didn't want to flash the images, or was away from my PC.
Method: https://tinyurl.com/y2bxeuq5
The link should work now.
Disregard the TWRP part (skip Step 4....go from Step 3 to Step 5).

dlhxr said:
For those with trouble installing 11.0.1.1 AA update with root as Google server only pushed incremental OTA at the moment.
1. Flash your current version unpatched boot.img into both slots in fastboot
2. Use the following command to boot from a patched boot, but not modifying the partitions. (fastboot boot patched.img)
3. Update with system updater with incremental ota.
4. Don't reboot, but flash the magisk with magisk app to the inactive slot.
5. Reboot and done.
Click to expand...
Click to collapse
Thanks for these steps, it worked for me. After I flashed Magisk via the Magisk App to the inactive slot, I rebooted and had the latest version installed with root preserved. :highfive:

After I did it I'm getting the com.android.phone stopping and my Sims aren't recognized. I cleared cache, phone and SIM toolkit but didn't work. Grrrrr

I'm a rooted global user and update has never showed until today. It was only 405mb and Google play services was showing the update. Oxygen updater shows nothing and system update shows nothing. I'm gonna wait to see what happens since it's not a full update

Same here global 406 mb ota. It's like not recognizing we have root...

bouchigo said:
I just updated and kept root. I used to use this method on my Pixel 2 XL when I didn't want to flash the images, or was away from my PC.
Method: https://tinyurl.com/y2bxeuq5
The link should work now.
Disregard the TWRP part (skip Step 4....go from Step 3 to Step 5).
Click to expand...
Click to collapse
Good looking out bro, that worked a charm. :good:

bouchigo said:
I just updated and kept root. I used to use this method on my Pixel 2 XL when I didn't want to flash the images, or was away from my PC.
Method: https://tinyurl.com/y2bxeuq5
The link should work now.
Disregard the TWRP part (skip Step 4....go from Step 3 to Step 5).
Click to expand...
Click to collapse
^^^^^^This -- easiest and fastest root upgrade I have ever done on any device.
Magisk is now built to do it this way.

bouchigo said:
I just updated and kept root. I used to use this method on my Pixel 2 XL when I didn't want to flash the images, or was away from my PC.
Method: https://tinyurl.com/y2bxeuq5
The link should work now.
Disregard the TWRP part (skip Step 4....go from Step 3 to Step 5).
Click to expand...
Click to collapse
This worked for me as well taking the actual partial OTA update from system update and going through the steps in Magisk.
A little nerve wracking considering the many times trying to update has failed on my last couple OP devices, but at least this time, it worked.
Thanks.

anyone have a patched magisk boot for IN2025?
I did the steps of flashing the stock boot.img, then booting the patched img, installed the OTA, used magisk to patch before reboot, but when it rebooted it said installation failed, and i was unable to access magisk after that as it was on the wrong slot... I had to apply the OTA update again, and now am stick without root
IN short, need either a stock IN2025 boot image to patch myself, or a magisk patched one...
TIA