I'M NOT RESPONSIBLE IF YOUR DEVICE BRICKS, SD CARD DAMAGES OR NUCLEAR WAR STARTS.
Rooting method described below will work on Oreo-running devices ONLY (confirmed on build OPN27.76-12-22 and on OPNS27.76-12-22-9).
Please follow all steps very carefully and make sure you downloaded correct versions of all .zip files mentioned in my instruction!
ROOT (SafetyNet test will PASS!)
1. Download all files listed below:
- twrp-3.2.3-0-addison.img (CLICK)
- Magisk-v17.1.zip or newer if availabe (CLICK)
- f2fsfix-2018.9.2.zip (CLICK)
2. Flash TWRP using Fastboot:
Code:
fastboot flash recovery twrp-3.2.3-0-addison.img
3. Flash Magisk-v17.1.zip (or newer if available).
4. Go to TWRP/Settings and open Terminal.
5. Run both of following commands:
Code:
echo KEEPVERITY=true>>/data/.magisk
echo KEEPFORCEENCRYPT=true>>/data/.magisk
6. Flash f2fsfix-2018.9.2.zip
7. Reboot (it is crucial in case of installing Xposed afterwards).
8. Optional but recommended: update your Magisk Manager to the latest version (CLICK).
9. Open Magisk -> Modules and update f2fs-loopback-bug-workaround module to the newest version (can be done only via Magisk Manager only if new version of f2fs-loopback-bug-workaround module is available).
10. Enjoy rooted Oreo.
UPDATE 03.10.2018
If you flashed everything as described in OP and noticed that you got stuck in boot, go to TWRP again and:
1. Uninstall Magisk using latest Magisk uninstaller.
2. Flash Magisk 17.1.zip AGAIN (yes.).
3. Flash f2fsfix-2018.9.2.zip
4. Enjoy rooted phone.
PS. I do not know why device does not start after first flashing to be honest, but these four steps above are confirmed by several users (and by me).
UPDATE 03.10.2018
XPOSED (be careful: Xposed for Oreo is still in BETA distribution and flashing it will break your SafetyNet!)
1. Open Magisk Manager -> Downloads.
2. Download Xposed Installer (the one from the screen below):
https://image.ibb.co/byLUuK/Xposed_Framework.png
3. Let Magisk install it.
4. Reboot.
5. Open Xposed Installer (you will see orange exclamation mark, don't worry).
6. Reboot once again.
7. Voila.
Hit THANKS if I helped!
Credits:
- @topjohnwu
- @rovo89
- @Artim_96
- @VR25
@rafikowy ah, so basically the problem was with dm-verity and forced encryption? That makes sense. So it would basically also work if you'd not extract the boot.img from the OTA zip and mod it with Magisk manager with both enabled and flash that (might be easier than flashing normal Magisk and then make the changes), so you'd basically just flash the img and the module zip in TWRP.
Well, if no bigger bugs appear I might try the Oreo OTA and root tomorrow. Don't think it will be here on its own till then, even if it's already the official rollout (Indian and brasilian users seem to get it officially)
First magisk manager did not want to open, but a reboot solved. thanks
So, Lenovorola is still "undecided" in regards to patching F2FS.
I wonder why...
Where can I find the firmware or OTA to update Oreo on my 1635-02 with Android 7.1.1 Patch December? Is possible back to Stock Oreo or Nougat?
Necrodaemon said:
Where can I find the firmware or OTA to update Oreo on my 1635-02 with Android 7.1.1 Patch December? Is possible back to Stock Oreo or Nougat?
Click to expand...
Click to collapse
Only a Soak test is available, the link is in the thread in the ROM section. And yes, it doesn't seem to update your bootloader, it was already successfully testet to go back to 7.1.1
Necrodaemon said:
Where can I find the firmware or OTA to update Oreo on my 1635-02 with Android 7.1.1 Patch December? Is possible back to Stock Oreo or Nougat?
Click to expand...
Click to collapse
Look at
https://forum.xda-developers.com/mo...se-attempt-t3812530/post76991120#post76991120
not work - moto z play - oreo soak
Unfortunately it does not work. : (TWRP prompts for a PIN to decrypt data.) How to select cancel and install Magisk on installation f2fs-loopback-bug-workaround-2018.1.31.zip displays an error that does not detect magisk or is incompatible. How do I format the date everything is installed but the phone does not turn on... Any idea?
Sorry but, if verity is enabled, that means you are unable to modify /system files?
Necrodaemon said:
Where can I find the firmware or OTA to update Oreo on my 1635-02 with Android 7.1.1 Patch December? Is possible back to Stock Oreo or Nougat?
Click to expand...
Click to collapse
You can go back, problem is you will lose IMEI by going back to Nougat.
huma_dawii said:
You can go back, problem is you will lose IMEI by going back to Nougat.
Click to expand...
Click to collapse
I gone back to 7.1.1 Nov patch and everything is OK with my IMEI. Just flash 7.1.1 Plus ROM with TWRP. One issue what I have - In can't mount OEM partition in TWRP.
Could someone provide a TWRP backup of the 8.0 Soak? I've modified the system partition and this method stoped working. All the 8.1 roms have a so bugged camera, I don't wanna go back to them
Camarda said:
Could someone provide a TWRP backup of the 8.0 Soak? I've modified the system partition and this method stoped working. All the 8.1 roms have a so bugged camera, I don't wanna go back to them
Click to expand...
Click to collapse
Here are system and boot from 8.0 soak test. Just unrar it adn put to TWRP folder with your backups.
St.Noigel said:
Here are system and boot from 8.0 soak test. Just unrar it adn put to TWRP folder with your backups.
Click to expand...
Click to collapse
I've restored the backup, but I'm still unable to boot with magisk. Don't know what is wrong now
Camarda said:
I've restored the backup, but I'm still unable to boot with magisk. Don't know what is wrong now
Click to expand...
Click to collapse
1. Restore backup
2. Flash Magisk 15.3
3. Flash this https://forum.xda-developers.com/apps/magisk/guide-magisk-official-version-including-t3577875
4. Flash this https://forum.xda-developers.com/apps/magisk/module-tool-magisk-manager-recovery-mode-t3693165
5. Go to the terminal in TWRP and run two commands:
- mm
- f
Reboot.
That's all. You don't need to run commands from OP.
IF I help you - you can buy me a beer )))))
Can i go back to 7.1.1 and relock bootloader ??
Hi,
Can anyone help me, i have updated to Oreo (Soak Update) and now i wanna go back to Nougat 7.1.1 NPNS26.118-22-2-12 and re-lock bootloader, is it possible ?? if yes guide me
thanks in advance
LovinVEVO said:
Hi,
Can anyone help me, i have updated to Oreo (Soak Update) and now i wanna go back to Nougat 7.1.1 NPNS26.118-22-2-12 and re-lock bootloader, is it possible ?? if yes guide me
thanks in advance
Click to expand...
Click to collapse
Nope. It's impossible for now. You can`t go back to full stock, because you'll lose your IMEI with flashing full 7.1.1 FW with RSD or fastboot.
St.Noigel said:
1. Restore backup
2. Flash Magisk 15.3
3. Flash this https://forum.xda-developers.com/apps/magisk/guide-magisk-official-version-including-t3577875
4. Flash this https://forum.xda-developers.com/apps/magisk/module-tool-magisk-manager-recovery-mode-t3693165
5. Go to the terminal in TWRP and run two commands:
- mm
- f
Reboot.
That's all. You don't need to run commands from OP.
IF I help you - you can buy me a beer )))))
Click to expand...
Click to collapse
Did everything, but still stuck at bootanimation. Only boots if I unninstall magisk.
Camarda said:
Did everything, but still stuck at bootanimation. Only boots if I unninstall magisk.
Click to expand...
Click to collapse
If you have bootanimation - just wait few minutes
St.Noigel said:
If you have bootanimation - just wait few minutes
Click to expand...
Click to collapse
Just waited for 30 minutes. It wont boot
Related
Hi,
I've downgraded my phone ZE520KL couple months ago but I've forgotten that VOLTE is only available on 7.0...
I've recieved the OTA notification, downloaded the package on the phone, but when it reboots it is going on TWRP & then if I'm rebooting it doesn't continue the upgrade process.
What am I missing? (on my previous phones this wasn't so tricky...) Should I use the Install method directly from TWRP? If Yes on which zip? Is it possible to find the one that I've downloaded directly with my phone?
bibile said:
Hi,
I've downgraded my phone ZE520KL couple months ago but I've forgotten that VOLTE is only available on 7.0...
I've recieved the OTA notification, downloaded the package on the phone, but when it reboots it is going on TWRP & then if I'm rebooting it doesn't continue the upgrade process.
What am I missing? (on my previous phones this wasn't so tricky...) Should I use the Install method directly from TWRP? If Yes on which zip? Is it possible to find the one that I've downloaded directly with my phone?
Click to expand...
Click to collapse
Same like me before. Have you rooted your phone yet? if yes then try this, it work for me though (Backup your phone is recommended)
1. Download busybox, supersu and no-verity file
2. Using flashfire app, choose flash zip or ota option
3. Add ota 'WW-ZE520Kl-.....'
4. Add firmware 'UL-ASUS-....'
5. Remove tickmark from 'Inject supersu'
And flash, it will reboot but do not boot to system. You must boot to twrp, flash no-verity file, busybox and supersu or your phone will not boot. Then reboot, done.
If this method is helpful, do reply to me
Btw, sorry for my poor english.
[email protected]@ said:
Same like me before. Have you rooted your phone yet? if yes then try this, it work for me though (Backup your phone is recommended)
1. Download busybox, supersu and no-verity file
2. Using flashfire app, choose flash zip or ota option
3. Add ota 'WW-ZE520Kl-.....'
4. Add firmware 'UL-ASUS-....'
5. Remove tickmark from 'Inject supersu'
And flash, it will reboot but do not boot to system. You must boot to twrp, flash no-verity file, busybox and supersu or your phone will not boot. Then reboot, done.
If this method is helpful, do reply to me
Btw, sorry for my poor english.
Click to expand...
Click to collapse
Thanks, works wonderfully! Flashfire flashed the new OTAs successfully but the phone didn't then boot (or it bootlooped). A quick Google search led me to your response and the dm-verity file fixed the boot!
I also didn't flash Busybox in case you needed to know and before flashing the OTAs I checked the "Automount" and "Mount systeam as R/W" in Flashfire otherwise the app would just get stuck in a blank screen.
EDIT: WiFI isn't working, tried already deleting the files in /data/misc/wifi, /persist and /data/misc/dhcp as suggested in various threads but still nothing. Anyone know how to fix it before I attempt to do a full backup and wipe?
vEEGAZ said:
Thanks, works wonderfully! Flashfire flashed the new OTAs successfully but the phone didn't then boot (or it bootlooped). A quick Google search led me to your response and the dm-verity file fixed the boot!
I also didn't flash Busybox in case you needed to know and before flashing the OTAs I checked the "Automount" and "Mount systeam as R/W" in Flashfire otherwise the app would just get stuck in a blank screen.
EDIT: WiFI isn't working, tried already deleting the files in /data/misc/wifi, /persist and /data/misc/dhcp as suggested in various threads but still nothing. Anyone know how to fix it before I attempt to do a full backup and wipe?
Click to expand...
Click to collapse
Deleting files in /data/misc is not helped. Try this:
1. Check your selinux permissive or enforcing. If permissive, you should re-root your phone. Remember to flash busybox too or it will may some crash. Still not working follow step 2.
2. Re-flash the ROM using twrp. No data will be lost. Don't forget to re-root or it will not boot.
3. Try the lastest fw .68 or .75 though someone told that the .28 ota file had issue on wifi.
[email protected]@ said:
Deleting files in /data/misc is not helped. Try this:
1. Check your selinux permissive or enforcing. If permissive, you should re-root your phone. Remember to flash busybox too or it will may some crash. Still not working follow step 2.
2. Re-flash the ROM using twrp. No data will be lost. Don't forget to re-root or it will not boot.
3. Try the lastest fw .68 or .75 though someone told that the .28 ota file had issue on wifi.
Click to expand...
Click to collapse
Reflashing through TWRP worked Although I did it after backing up all the apps and did a factory reset which didn't even fix the wi-fi problem. But then Flashfire is useless if TWRP is capable of flashing OTAs right?
vEEGAZ said:
Reflashing through TWRP worked Although I did it after backing up all the apps and did a factory reset which didn't even fix the wi-fi problem. But then Flashfire is useless if TWRP is capable of flashing OTAs right?
Click to expand...
Click to collapse
Not really. Since OTA file can't flash through twrp. It really annoying for someone (like me ), so for the easiest way is just flash it using Flashfire, no need to use computer to flash stock recovery .
@vEEGAZ
yep, that's what I've been saying for months. I've never used anything but TWRP to flash my phone. I've downgraded, gone custom and back to stock many times.
@[email protected]@
I flash OTA's through TWRP every time there's an update.
wang1chung said:
@vEEGAZ
yep, that's what I've been saying for months. I've never used anything but TWRP to flash my phone. I've downgraded, gone custom and back to stock many times.
@[email protected]@
I flash OTA's through TWRP everything there's an update.
Click to expand...
Click to collapse
When my phone still in 6.0.1, flashed OTA's throgh twrp it said 'not correct phone...' but after upgraded 7.0 it succeeded although i don't need it anymore.
[email protected]@ said:
When my phone still in 6.0.1, flashed OTA's throgh twrp it said 'not correct phone...' but after upgraded 7.0 it succeeded although i don't need it anymore.
Click to expand...
Click to collapse
edit your updater-script and it'll flash no problem.
[email protected]@ said:
When my phone still in 6.0.1, flashed OTA's throgh twrp it said 'not correct phone...' but after upgraded 7.0 it succeeded although i don't need it anymore.
Click to expand...
Click to collapse
Yeah that's what I encountered aswell back 2-3 years ago, I remember I couldn't flash any OTAs via TWRP but apparently now you can. That's why I also used Flashfire in the first place but after running out of all options for the wi-fi problem I decided to give TWRP a try et voilà, it worked
wang1chung said:
edit your updater-script and it'll flash no problem.
Click to expand...
Click to collapse
I've tried that and still not working.
@[email protected]@
I JUST did it....on 1711.75 now. There was no recovery partition update either so I didn't have to reflash TWRP after :good:
I did have a bootloop issue after but fixed that by flashing the no-verity file. I'm not sure if that's related to having magisk installed though.
wang1chung said:
@[email protected]@
I JUST did it....on 1711.75 now. There was no recovery partition update either so I didn't have to reflash TWRP after :good:
I did have a bootloop issue after but fixed that by flashing the no-verity file. I'm not sure if that's related to having magisk installed though.
Click to expand...
Click to collapse
1. After reflashing rom through twrp, i lost my twrp. Oh, but when i use Flasfire, it isn't lost.
2. Not sure but after flashing ROM your boot will change to normal so it may not related to magisk or supersu. Maybe it beacause of the twrp, i've tried reflash stock recovery once and i can updated it without flash no-verity file though i've installed magisk.
[email protected]@ said:
1. After reflashing rom through twrp, i lost my twrp. Oh, but when i use Flasfire, it isn't lost.
2. Not sure but after flashing ROM your boot will change to normal so it may not related to magisk or supersu. Maybe it beacause of the twrp, i've tried reflash stock recovery once and i can updated it without flash no-verity file though i've installed magisk.
Click to expand...
Click to collapse
1. You will only lose TWRP if there is a recovery partition update in the stock firmware, yes, but that doesn't happen with every update. I think I read of a way to block it from updating the recovery partition but can't find the article right now. If flashfire works, use it, I just like TWRP for the other features like making and restoring nandroid backups.
2. I dirty flashed the update again through TWRP, verified the bootloop issue and then installed magisk (through TWRP) and it resolved the bootloop issue. No-verify file not required.
wang1chung said:
1. You will only lose TWRP if there is a recovery partition update in the stock firmware, yes, but that doesn't happen with every update. I think I read of a way to block it from updating the recovery partition but can't find the article right now. If flashfire works, use it, I just like TWRP for the other features like making and restoring nandroid backups.
2. I dirty flashed the update again through TWRP, verified the bootloop issue and then installed magisk (through TWRP) and it resolved the bootloop issue. No-verify file not required.
Click to expand...
Click to collapse
1.Ok, i got it.
2. The way using TWRP is keep the root ( root or not boot) and stock recovery is contrary ( can't root but will boot) or just flash custom kernel through twrp (not root required).
simple question :
- you are talking about OTA & Firmware...
I've downloaded again from asus website Version WW-V14.2020.1711.75 (I assume it is the latest firmware). Are you simply giving the example of an OTA that is released post the firmware version I have to install to have the 7.0 base?
Or is it anything that I'm missing...
From your explanations I should only :
- install flashfire
- flash the latest firmware
- boot into TWRP & flash no verity
- reboot the system
Right?
bibile said:
simple question :
- you are talking about OTA & Firmware...
I've downloaded again from asus website Version WW-V14.2020.1711.75 (I assume it is the latest firmware). Are you simply giving the example of an OTA that is released post the firmware version I have to install to have the 7.0 base?
Or is it anything that I'm missing...
From your explanations I should only :
- install flashfire
- flash the latest firmware
- boot into TWRP & flash no verity
- reboot the system
Right?
Click to expand...
Click to collapse
Yep, you can also flash the latest .zip via TWRP instead of using Flashfire, it's 100% working for me. Just REMEMBER to flash the no-verity file otherwise you'll end up in a bootloop.
I have newest oreo fw from asus website. Ive unlocked bootloader with official app. Now i want WTRP and root with magisk. I want to know how to flash updates to get all wroking?
1. Flash TWRP via fastboot?
2. Flash Magisk via TWRP?
3. When update will release i must flash whole fw from asus website with TWRP and then no-verity file to boot?
4. Or can i use flashfire app to flash fw from asus website and then no-verity zip?
What is the best solution to have updated system without use PC? Step by step guide will be great THX
Im confuse.
Im using 1711.75 with magisk 15.3 and twrp 3.2.1.0
I have the full firmware of initial oreo
I just have to install flashfire
Flash the full firmware oreo that i have then rboot to twrp to flash no verify zip?
ktl20 said:
I have newest oreo fw from asus website. Ive unlocked bootloader with official app. Now i want WTRP and root with magisk. I want to know how to flash updates to get all wroking?
1. Flash TWRP via fastboot?
2. Flash Magisk via TWRP?
3. When update will release i must flash whole fw from asus website with TWRP and then no-verity file to boot?
4. Or can i use flashfire app to flash fw from asus website and then no-verity zip?
What is the best solution to have updated system without use PC? Step by step guide will be great THX
Click to expand...
Click to collapse
iamROOTX said:
Im confuse.
Im using 1711.75 with magisk 15.3 and twrp 3.2.1.0
I have the full firmware of initial oreo
I just have to install flashfire
Flash the full firmware oreo that i have then rboot to twrp to flash no verify zip?
Click to expand...
Click to collapse
The safest and true way to flash any ota update without any issues by using stock recovery, don't use twrp or flashfire or any other apps.
follow the steps below:
1. When you are rooted and twrp installed, to getback to full stock boot and recovery without wiping data, flash the latest raw image available. For oreo the latest available one for ze520kl is WW_ZE520KL_15.0410.1712.31_M3.10.47.16_Phone-user.raw.zip.
2. Now flash the ota update available normally via stock recovery.
3. Flash oreo support twrp-3.2.1-0 and magisk zip.
4. Done.
I'm periodically upload the latest available ota update for ze520kl in the ze520kl ota update links thread.
Here is the latest one.
This is a guide for people who want a rooted MIUI. It will keep stock recovery and system partitions untouched to allow MIUI OTAs to install without problems. It will also pass Google's safety net test so bank apps keep working. The best of both worlds really
Requirements:
- Unlocked bootloader
- Windows PC
- fastboot (present in the miunlock app folder)
- Latest TWRP (download here)
- Latest Magisk (download here)
Steps:
- Install latest Magisk app
- Put latest Magisk zip on your device storage (SD)
- Shut down device
- put latest twrp.img in miunlock folder
- Connect phone to PC
- Press volume down and power button to boot to fastboot mode
- Open "Command Prompt" on your PC
- Type: (without quotes)
----- "cd C:\Users\[your name]\Desktop\miflash_unlock-en-2.3.803.10" . (or wherever the folder is)
----- "fastboot devices"
----- "fastboot boot twrp.img"
- In a few seconds, TWRP will boot on your phone. DO NOT swipe to make changes to system.
- In TWRP, flash the Magisk zip
Enjoy root
Disclaimer: I will not be help responsible for any damage or loss caused by following those steps.
Does it mean I can install TWRP and flash xposed etc and still have OTA updates?
What is the difference to this one: https://forum.xda-developers.com/redmi-note-4/how-to/red-wolf-install-twrp-root-device-t3708337
Best,
kn1g
kn1g said:
Does it mean I can install TWRP and flash xposed etc and still have OTA updates?
What is the difference to this one: https://forum.xda-developers.com/redmi-note-4/how-to/red-wolf-install-twrp-root-device-t3708337
Best,
kn1g
Click to expand...
Click to collapse
Same as my question. Let say system partition won't touch by root, but twrp is installed over the Mi stock recovery. Will it install Eta?
This guide DOES NOT flash TWRP. Stock recovery remains so OTA updates work.
The only thing that is touched by this guide is the "Boot" partition to install magisk. You can restore stock "Boot" using magisk manager's uninstall option at any moment and be 100% stock again.
Ok, but is Xposed etc. possible?
kn1g said:
Ok, but is Xposed etc. possible?
Click to expand...
Click to collapse
I haven’t tried but should work.
https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
It is really works! Thank you!
gonna check this cause i wanna root the phone but keep enjoying updates
I just rooted my Note 4 Qualcomm by this method, so far so good. Really easy and dummy-proof tutorial
I bump this because it worked. Quite easy, clean and fast. Thanx!
I already install latest TWRP for mido and latest magisk, but still I can not update my mido using OTA updater
Anyone can help me?
masri.razak said:
I already install latest TWRP for mido and latest magisk, but still I can not update my mido using OTA updater
Anyone can help me?
Click to expand...
Click to collapse
Wrong...u need to boot twrp not to install. Read the OP for steps.
Dadovvv said:
Wrong...u need to boot twrp not to install. Read the OP for steps.
Click to expand...
Click to collapse
Well... That's I mean, boot TWRP using adb
After have TWRP, how can i get update via OTA?
it successfully worked for Redmi Note 4 global beta/stable MIUI9.2
even installed camera api 2 using magisk module
Just a quick question. I've TWRP right now with SuperSU. So I'll remove SuperSU, flash Magisk in TWRP. All good till now, but I'd want the stock recovery, a flash-able zip maybe. How can I get it? From where?
**[EDIT]**
Okay. One can get it from fastboot ROMs available at MIUI website (here), extract the pack and get recovery.img.
Installed successfully on miui 9.2.1.0 stable
Now when a new update for magisk is released, how should i update it??
I have two questions:
1. Why does the bootloader need to be unlocked and how can I do that?
2. What happens to Magisk if I install an OTA?
I'd like to keep the phone untouched but I need to change emojis and with Xposed I can use Youtube in background.
Giacomo_ITA said:
I have two questions:
1. Why does the bootloader need to be unlocked and how can I do that?
2. What happens to Magisk if I install an OTA?
Click to expand...
Click to collapse
1. sign on en.miui com and you can use xiaomi unlocker (after 72 hours)
2. two OTA updates and I had to reroot it
but it seems that it is not necessary, I can not post the link
google --> github magisk tips (it should be the first result)
Baxeisindi said:
1. sign on en.miui com and you can use xiaomi unlocker (after 72 hours)
2. two OTA updates and I had to reroot it
but it seems that it is not necessary, I can not post the link
google --> github magisk tips (it should be the first result)
Click to expand...
Click to collapse
Do you mean this?
When an OTA is available, please go to Magisk Manager → Uninstall → Restore Images. Do not reboot immediately or you will have Magisk uninstalled. This will restore your boot (or dtbo if available) back to 100% untouched stock images in order to pass verifications. This step is required before doing any of the following steps written below!
Click to expand...
Click to collapse
Giacomo_ITA said:
Do you mean this?
Click to expand...
Click to collapse
Yes, I hope it works, anyway at the next update I will reroot it in a few minutes.
I followed many guides out there and none worked, phone would always bootloop or freeze at Motorola's logo.
Now I've found a way to do it.
You can use the files attached below.
INSTALLATION
1.back up your system, data and boot partition. If the process fails restoring those will revert the changes.
2.Download and flash Magisk 15.3 (later versions didn't work for me, phone wouldn't boot at all) through twrp.
3.Flash the latest f2fs loop back work around.
4. Flash magisk manager for recovery (mm-2018.8.1.zip attached below)
5.Boot your phone
UPDATING TO MAGISK 16.0
Once the phone has booted:
1.install magisk manager 5.8.3 (attached below)
2.Open magisk manager
3.if any update is available for magisk manager, install it.
4.click on the button that tells you to update magisk to latest version.
IMPORTANT:
5. Select the direct installation method. Flashing the update through recovery will render the phone unable to boot again.
That's it, thanks.
=======
Downloads:
Magisk 15.3
f2fs-loopback-bug-workaround-2018.8.1.zip
mm-2018.8.1.zip
Magisk Manager v5.8.3.apk
freeZbies said:
I followed many guides out there and none worked, phone would always bootloop or freeze at Motorola's logo.
Now I've found a way to do it.
You can use the files attached below.
....snip
Click to expand...
Click to collapse
Interesting.
For what is the magisk manager for recovery needed?
Wolfcity said:
Interesting.
For what is the magisk manager for recovery needed?
Click to expand...
Click to collapse
Magisk 15.3 doesn't come with magisk manager, so you either have to flash it from recovery or install the provided apk directly.
EDIT: Mm for recovery is actually a module that allows you to list and Uninstall modules from Twrp in case your phone no longer boots after flashing a module.
and you're correct, magisk 15.3 does include magisk manager and will install it. the problem I had is that I flashed magisk 15.3 over a system where either the boot.img was already patched, and I experienced that magisk manager sometimes wont be installed in these cases
Sent from my Moto G (5) using Tapatalk
freeZbies said:
Magisk 15.3 doesn't come with magisk manager, so you either have to flash it from recovery or install the provided apk directly.
Click to expand...
Click to collapse
This is not true. The (original) Magisk 15.3 has inside the MM and will install it.
nicolap8 said:
This is not true. The (original) Magisk 15.3 has inside the MM and will install it.
Click to expand...
Click to collapse
Well, I may be not well informed then, but upon flashing magisk 15.3, magisk manager did not show up in my device.
freeZbies said:
Well, I may be not well informed then, but upon flashing magisk 15.3, magisk manager did not show up in my device.
Click to expand...
Click to collapse
At least it's inside the official 15.3. But I remember that MM was often not installed in earlier builds.
Sent from my Moto G5 Plus using XDA Labs
I Got Another Method Also
1. I Flashed oreo soak.
2. booted it up and set my moto g5 .
3. went to boot loader and flashed (64bit) TWRP .... (i know that this is a 32 bit rom)
4. Backed up EFS.
5. Didnt boot it and went to bootloader again
6. flashed 32 bit recovery .
7. Flashed No-verify-opt-6.0
8. Booted . ( it was working.)
9. installed latest magics manager.
10. downloaded latest magicx.zip
11 booted to twrp
12 flashed magics16(1600)
13. Booted and it started working like charm. (Had some problems with safetynetcheck)
14. Pls Dont Point Your Fingers At Me If Your Device Stops Booting.
15 . Most important ...... Enjoy
Sonisudhanshu said:
1. I Flashed oreo soak.
2. booted it up and set my moto g5 .
3. went to boot loader and flashed (64bit) TWRP .... (i know that this is a 32 bit rom)
4. Backed up EFS.
5. Didnt boot it and went to bootloader again
6. flashed 32 bit recovery .
7. Flashed No-verify-opt-6.0
8. Booted . ( it was working.)
9. installed latest magics manager.
10. downloaded latest magicx.zip
11 booted to twrp
12 flashed magics16(1600)
13. Booted and it started working like charm. (Had some problems with safetynetcheck)
14. Pls Dont Point Your Fingers At Me If Your Device Stops Booting.
15 . Most important ...... Enjoy
Click to expand...
Click to collapse
One question, why do you flash a 64bit recovery in-between? You can backup efs with official TWRP too, just persist needs a special unofficial build (or you can do it by dd command).
Are you sure that no-verity.zip is needed?
That job should be done by magisk.
Sent from my Moto G5 Plus using XDA Labs
Wolfcity said:
One question, why do you flash a 64bit recovery in-between? You can backup efs with official TWRP too, just persist needs a special unofficial build (or you can do it by dd command).
Are you sure that no-verity.zip is needed?
That job should be done by magisk.
Sent from my Moto G5 Plus using XDA Labs
Click to expand...
Click to collapse
As far as I know official twrp doesn't backup any of those. I'm on 3.2.3.0 official and it doesnt offer an option to backup neither efs nor persist.
Sent from my Moto G (5) using Tapatalk
freeZbies said:
As far as I know official twrp doesn't backup any of those. I'm on 3.2.3.0 official and it doesnt offer an option to backup neither efs nor persist.
Click to expand...
Click to collapse
I'm on 3.2.2.0 and it offers the ability to backup EFS, 3.2.1.0 also.
As said, for persist there are several unofficial builds but you can back it up with those commands in TWRP terminal:
Code:
dd if=/dev/block/bootdevice/by-name/persist of=/sdcard/persist.img
for backup and
Code:
dd if=/sdcard/persist.img of=/dev/block/bootdevice/by-name/persist
for restore.
Sent from my Moto G5 Plus using XDA Labs
Wolfcity said:
One question, why do you flash a 64bit recovery in-between? You can backup efs with official TWRP too, just persist needs a special unofficial build (or you can do it by dd command).
Are you sure that no-verity.zip is needed?
That job should be done by magisk.
Sent from my Moto G5 Plus using XDA Labs
Click to expand...
Click to collapse
1. Because I didn't have any option to backup efs in twrp.32.bit
2. I was not sure but I just flashed it so that no problem occurs like booting issue..
Hope this helps
Guys pls keep one thing in mind.
Rooting causes some issue.
If you are installing soak 8.1 , then this post is for you.
First of all , there is no fully independent rom for soak test , i mean that its an ota , so rooting this rom will prevent you from upgrading via ota, so you will have to go to 7.0 then 8.1 then any further ota, which is time comsuming..... If this helped , i would be gladed
Do the magisk modules work ?
llucas_br said:
Do the magisk modules work ?
Click to expand...
Click to collapse
Which magisk module?
Sent from my Moto G5 Plus using XDA Labs
TWRP flashable Oreo 8.1 OTA updates
Sonisudhanshu said:
Guys pls keep one thing in mind.
Rooting causes some issue.
If you are installing soak 8.1 , then this post is for you.
First of all , there is no fully independent rom for soak test , i mean that its an ota , so rooting this rom will prevent you from upgrading via ota, so you will have to go to 7.0 then 8.1 then any further ota, which is time comsuming.....
Click to expand...
Click to collapse
There are already TWRP flashable Oreo 8.1 OTA updates available.
https://forum.xda-developers.com/g5/development/twrp-flashable-soak-test-oreo-t3827913
thanks
Chekm8Qc said:
I just installed magisk 17.1 and it worked right away. Even safety net passes.
Click to expand...
Click to collapse
Chekm8Qc confirmed here https://forum.xda-developers.com/showpost.php?p=77906610&postcount=56 that he could directly install the latest Magisk version (currently 17.1) on Oreo 8.1 OPP28.85-16 eliminating the need to install an older version first as recommended in this thread.
I can also confirm, installed straight away 17.1 and worked flawlessly, no bootloop and safety net passed.
Please Update!
Using the currently newest version which is Magisk18.0.zip (flashed in twrp64bit) Magisk Manager showed up in my device app list, then installed the currently newest apk, which is MagiskManager-v6.1. After that i had root. I only flashed f2fs after magisk, no mm_for_recovery.
Quick question: what exactly is that f2fs bug which that file should fix? Because after i installed twrp i had to factory reset or format data that i was able to flash things (there were red lines while trying to flash, telling me that data is encrypted or so and i have to forma data). But even though i did and tried then your versions & mm_for_recovery (which didnt work at all, no root) when i wanted to restore the boot & system image i made earlier as you said there was that text again, telling me i need to format data,.. did that, restored, flashed new versions and it worked, but im afraid that i need to format dat now everytime i want to flash something ?!
Greetings 7080
G5-User7080 said:
Using the currently newest version which is Magisk18.0.zip (flashed in twrp64bit) Magisk Manager showed up in my device app list, then installed the currently newest apk, which is MagiskManager-v6.1. After that i had root. I only flashed f2fs after magisk, no mm_for_recovery.
Quick question: what exactly is that f2fs bug which that file should fix? Because after i installed twrp i had to factory reset or format data that i was able to flash things (there were red lines while trying to flash, telling me that data is encrypted or so and i have to forma data). But even though i did and tried then your versions & mm_for_recovery (which didnt work at all, no root) when i wanted to restore the boot & system image i made earlier as you said there was that text again, telling me i need to format data,.. did that, restored, flashed new versions and it worked, but im afraid that i need to format dat now everytime i want to flash something ?!
Greetings 7080
Click to expand...
Click to collapse
in oreo stock you dont need f2fs bug module, because is working without it
I have unlocked bootloader + root with magisk. Is there anything special I need to do before letting the OTA update? What about afterwards, will I need to re root?
Sorry if this question was already asked and answered- I couldn't find anything. Just want to make sure I'm not doing anything stupid, thanks in advance.
For clarity I'm on the latest magisk canary and am using a U.S. phone.
cubeplayer1 said:
I have unlocked bootloader + root with magisk. Is there anything special I need to do before letting the OTA update? What about afterwards, will I need to re root?
Sorry if this question was already asked and answered- I couldn't find anything. Just want to make sure I'm not doing anything stupid, thanks in advance.
For clarity I'm on the latest magisk canary and am using a U.S. phone.
Click to expand...
Click to collapse
Update using local, dont reboot - go to magisk; install to inactive slot(after OTA) *disable module to be safe - Then restart
cubeplayer1 said:
I have unlocked bootloader + root with magisk. Is there anything special I need to do before letting the OTA update? What about afterwards, will I need to re root?
Sorry if this question was already asked and answered- I couldn't find anything. Just want to make sure I'm not doing anything stupid, thanks in advance.
For clarity I'm on the latest magisk canary and am using a U.S. phone.
Click to expand...
Click to collapse
If you're on ob3 I read that it needs to wipe, if you're on 11.0.0 stable then just update, don't reboot, disable magisk modules, patch after OTA in magisk and that's it
dladz said:
If you're on ob3 I read that it needs to wipe, if you're on 11.0.0 stable then just update, don't reboot, disable magisk modules, patch after OTA in magisk and that's it
Click to expand...
Click to collapse
Sounds easy enough. Should I also worry about flashing back to stock kernel as well?
cubeplayer1 said:
Sounds easy enough. Should I also worry about flashing back to stock kernel as well?
Click to expand...
Click to collapse
If you update then the kernel gets done too.
If you have modules installed disable them first.
You'll be fine.
PS: so are you on ob3 or 11 stable?
I'm rooted with an unlocked bootloader on 11.IN11AA (Global). How do I perform a local upgrade without the OTA file to put into the root folder? It seems like the Global version of the OTA file is nowhere to be found and I can't download it via System Update since it fails due to root. Do we need to just wait for the 11.0.1.1.IN11AA OTA zip file to be posted? Thanks in advance.
Yes, looks like we are in waiting mode for it to show up...
dladz said:
If you update then the kernel gets done too.
If you have modules installed disable them first.
You'll be fine.
PS: so are you on ob3 or 11 stable?
Click to expand...
Click to collapse
Stable. Haven't done the update yet because I'm getting "installation problem" when I try to download OTA. Oxygen updater not working either. Not sure what's up lol but I'm over it. Guess I gotta go find the file and install locally.
cubeplayer1 said:
Stable. Haven't done the update yet because I'm getting "installation problem" when I try to download OTA. Oxygen updater not working either. Not sure what's up lol but I'm over it. Guess I gotta go find the file and install locally.
Click to expand...
Click to collapse
You'd have to install locally even with oxygen updater.
galaxys said:
Yes, looks like we are in waiting mode for it to show up...
Click to expand...
Click to collapse
Yea I guess that's why Oxygen Updater isn't showing anything new for me. Once it shows up on the internet, I'm sure the OU app will refresh and show an available update.
cubeplayer1 said:
I have unlocked bootloader + root with magisk. Is there anything special I need to do before letting the OTA update? What about afterwards, will I need to re root?
Sorry if this question was already asked and answered- I couldn't find anything. Just want to make sure I'm not doing anything stupid, thanks in advance.
For clarity I'm on the latest magisk canary and am using a U.S. phone.
Click to expand...
Click to collapse
For those with trouble installing 11.0.1.1 AA update with root as Google server only pushed incremental OTA at the moment.
1. Flash your current version unpatched boot.img into both slots in fastboot
2. Use the following command to boot from a patched boot, but not modifying the partitions. (fastboot boot patched.img)
3. Update with system updater with incremental ota.
4. Don't reboot, but flash the magisk with magisk app to the inactive slot.
5. Reboot and done.
cubeplayer1 said:
Stable. Haven't done the update yet because I'm getting "installation problem" when I try to download OTA. Oxygen updater not working either. Not sure what's up lol but I'm over it. Guess I gotta go find the file and install locally.
Click to expand...
Click to collapse
I just updated and kept root. I used to use this method on my Pixel 2 XL when I didn't want to flash the images, or was away from my PC.
Method: https://tinyurl.com/y2bxeuq5
The link should work now.
Disregard the TWRP part (skip Step 4....go from Step 3 to Step 5).
dlhxr said:
For those with trouble installing 11.0.1.1 AA update with root as Google server only pushed incremental OTA at the moment.
1. Flash your current version unpatched boot.img into both slots in fastboot
2. Use the following command to boot from a patched boot, but not modifying the partitions. (fastboot boot patched.img)
3. Update with system updater with incremental ota.
4. Don't reboot, but flash the magisk with magisk app to the inactive slot.
5. Reboot and done.
Click to expand...
Click to collapse
Thanks for these steps, it worked for me. After I flashed Magisk via the Magisk App to the inactive slot, I rebooted and had the latest version installed with root preserved. :highfive:
After I did it I'm getting the com.android.phone stopping and my Sims aren't recognized. I cleared cache, phone and SIM toolkit but didn't work. Grrrrr
I'm a rooted global user and update has never showed until today. It was only 405mb and Google play services was showing the update. Oxygen updater shows nothing and system update shows nothing. I'm gonna wait to see what happens since it's not a full update
Same here global 406 mb ota. It's like not recognizing we have root...
bouchigo said:
I just updated and kept root. I used to use this method on my Pixel 2 XL when I didn't want to flash the images, or was away from my PC.
Method: https://tinyurl.com/y2bxeuq5
The link should work now.
Disregard the TWRP part (skip Step 4....go from Step 3 to Step 5).
Click to expand...
Click to collapse
Good looking out bro, that worked a charm. :good:
bouchigo said:
I just updated and kept root. I used to use this method on my Pixel 2 XL when I didn't want to flash the images, or was away from my PC.
Method: https://tinyurl.com/y2bxeuq5
The link should work now.
Disregard the TWRP part (skip Step 4....go from Step 3 to Step 5).
Click to expand...
Click to collapse
^^^^^^This -- easiest and fastest root upgrade I have ever done on any device.
Magisk is now built to do it this way.
bouchigo said:
I just updated and kept root. I used to use this method on my Pixel 2 XL when I didn't want to flash the images, or was away from my PC.
Method: https://tinyurl.com/y2bxeuq5
The link should work now.
Disregard the TWRP part (skip Step 4....go from Step 3 to Step 5).
Click to expand...
Click to collapse
This worked for me as well taking the actual partial OTA update from system update and going through the steps in Magisk.
A little nerve wracking considering the many times trying to update has failed on my last couple OP devices, but at least this time, it worked.
Thanks.
anyone have a patched magisk boot for IN2025?
I did the steps of flashing the stock boot.img, then booting the patched img, installed the OTA, used magisk to patch before reboot, but when it rebooted it said installation failed, and i was unable to access magisk after that as it was on the wrong slot... I had to apply the OTA update again, and now am stick without root
IN short, need either a stock IN2025 boot image to patch myself, or a magisk patched one...
TIA
Anyone who needs it
This is T mobile KB2007 boot image (unmodified)
Fresh out of the box
11.1.0.2 KB09CB : boot_11102.img
Security Update November 2020
11.0.6.8 KB09CB: boot_11068.img
OTA Link
https://android.googleapis.com/packages/ota-api/package/52b06537d6cb337f111b279a57b597f9390e6048.zip
January 2021 security update
11.0.7.9 KB09CB
OTA link
https://android.googleapis.com/packages/ota-api/package/99bca5df5c48825512178d8a41575c93370907c9.zip
Original Boot image : boot11079
Magisk canary Patched Boot : Boot11079magisk
How would someone go about installing or flashing this without twrp?
I'm rooted on 11.0.6.8 and want to do the ota to 11.0.7.9 but system update isn't here on my phone
Reserved
spart0n said:
How would someone go about installing or flashing this without twrp?
I'm rooted on 11.0.6.8 and want to do the ota to 11.0.7.9 but system update isn't here on my phone
Click to expand...
Click to collapse
for unlocked bootloader
To install OTA
1- Restore original boot on magisk manager
2- Install OTA and reboot (Install magisk to inactive slot wont work and high risk boot-loop)
3- Once the update is finish, reboot to bootloader
4. Boot (Do NOT FLASH) magisk patched image (fastboot boot magistpatched)
5. Open Magisk Manager and do Magisk Install (Direct Install)
6. Reboot and you are done
hoodred said:
for unlocked bootloader
To install OTA
1- Restore original boot on magisk manager
2- Install OTA and reboot (Install magisk to inactive slot wont work and high risk boot-loop)
3- Once the update is finish, reboot to bootloader
4. Boot (Do NOT FLASH) magisk patched image (fastboot boot magistpatched)
5. Open Magisk Manager and do Magisk Install (Direct Install)
6. Reboot and you are done
Click to expand...
Click to collapse
Do you think I could use a custom recovery (LOS or pixel experience) and use the adb side load and do the ota that way then reflash magisk right after?
spart0n said:
Do you think I could use a custom recovery (LOS or pixel experience) and use the adb side load and do the ota that way then reflash magisk right after?
Click to expand...
Click to collapse
Just restore your boot image
and open system update and hit check update to download and install the ota.
and make sure you dont connect to some funky VPN that for some reason showing your location outside the USA
I would turn off all magisk modules first and then uninstall magisk through the magisk app then install the OTA.
Will OTA wipe data?
Phone services stop working...
Just wanted to say thanks for this! Definitely needed these
NVM
How do I flash these and return to stock? Currently in rooted, but on custom ROM. Thanks in advance.
hoodred said:
January 2021 security update
11.0.7.9 KB09CB
OTA link
https://android.googleapis.com/packages/ota-api/package/99bca5df5c48825512178d8a41575c93370907c9.zip
Original Boot image : boot11079
Magisk canary Patched Boot : Boot11079magisk
Click to expand...
Click to collapse
Any chance could post the boot.img for the latest kb2007 ota
Caltinpla said:
New version: 11.0.8.10
Click to expand...
Click to collapse
Thanks
yes would also like the newest
can anyone supply me with tmobile modem img for 8T... Having serious connections issues. I appreciate it
April 2021 security update
11.0.9.11.KB09CB
OTA Link
https://android.googleapis.com/packages/ota-api/package/caf9f8af0422ecfc8dc56e22dbdd4b0aa5947373.zip
I don't have boot images. Snagged the OTA link by looking at logcat.
hoodred said:
Anyone who needs it
This is T mobile KB2007 boot image (unmodified)
Fresh out of the box
11.1.0.2 KB09CB : boot_11102.img
Security Update November 2020
11.0.6.8 KB09CB: boot_11068.img
OTA Link
https://android.googleapis.com/packages/ota-api/package/52b06537d6cb337f111b279a57b597f9390e6048.zip
Click to expand...
Click to collapse
Thank you! This is exactly what I need to FINALLY (caps for emphasis) get rooted. You're a gentleman and a scholar.
hoodred said:
Anyone who needs it
This is T mobile KB2007 boot image (unmodified)
Fresh out of the box
11.1.0.2 KB09CB : boot_11102.img
Security Update November 2020
11.0.6.8 KB09CB: boot_11068.img
OTA Link
https://android.googleapis.com/packages/ota-api/package/52b06537d6cb337f111b279a57b597f9390e6048.zip
Click to expand...
Click to collapse
Hey there! You uploaded a gold mine! With your permission, may I share this amongst the other groups? You will receive a shout out/due credit for your efforts.
Please let me know and thanks.
How would you install this without magisk?