Related
my defy is not being recognised by any of my laptop.
while i am successfully able to charge it from a wall socket.
not even in bootloader mood it is being able to detect any the defy using any of the available usb cord.
I am using the quarks gingerbread rom 11 11 11.
please help me as fast as possible.
and one more thing i have already tried to reset the cache.
will it be possible using bluetooth to be able to get back to froyo rom(so that i am able to send it to motorola service).
and also when the usb cord is inserted white lit glows up for a sec and will then switch off.
I am able to use my defy normally otherwise.
Seems like a physical problem with either your USB port or USB cable.
If you change the cable and it doesn't work - then it's the USB port in the phone, and you'll need to repair it.
Actually not it is not even booting it is stuck at m logo.
can i change the m logo(cyanogen) to normal motorola logo so that i can take it to motorola service centre(as it is still in warranty) by installing some zip.
i am able to access the 2nd init from it.
and more thing when i go to bootloader mode and connect the usb it says usb is connected.
Sainyam said:
and more thing when i go to bootloader mode and connect the usb it says usb is connected.
Click to expand...
Click to collapse
I've got the exact same problem, got anyone found a solution yet?
it say's it's connected but the pc don't recognize it. All Drivers installed a thousand of times on win 7 64 bit
thx
HB
the driver has some problems on win7 64bit.do you try it on xp?
Sent from my MB525 using xda premium
thx for the fast answer
not yet, just win 7 x86, i'll try to find someone with xp
Have u installed ur Motorola drivers on ur comp ? If no install them.. they help...
If it still doesn't work, right click on Rds>properties>compatibility>win xp. Try this too...
All the best!
Sent from my MB525 using XDA
I've got aprox the same problem , I can charge it ( but it says that IS DISCHARGING , nothing says me that is charging , only if I check battery level ) , but no connect via usb , no recognize RSD Lite , nothing .. More than that , If I plugin to wall charge or usb charge , my phone is working without battery , without restart .. any reason ?
Boot your phone into bootloader , flash your sbf go into stock recovery make a factory reset and reboot
Bootloader : vol. Up + power button
Sent from my MB526 using XDA App
bone101 said:
Boot your phone into bootloader , flash your sbf go into stock recovery make a factory reset and reboot
Bootloader : vol. Up + power button
Sent from my MB526 using XDA App
Click to expand...
Click to collapse
Doesn't recognize RSD Lite , how can I do that ? There's no data connection between pc and phone , just energy .
You boot into bootloader , you plug your phone onto pc with the newest driver and get no connection in rsd lite ?
Sent from my MB526 using XDA App
bone101 said:
You boot into bootloader , you plug your phone onto pc with the newest driver and get no connection in rsd lite ?
Sent from my MB526 using XDA App
Click to expand...
Click to collapse
Yes , absolute nothing I've reinstalled all drivers , but nothing .. It says on bootloader " Connect USB " and nothing happen if I plugin .
Anyone ? Please ? I Don't want to go service ..
you seems to have motherboard problem if your phone is in warranty claim it.
I was having the same issue, i gave my phone yesterday for motherboard replacement they asked me for 10 days so be ready for it.
i dont understand why so many people are getting this kinda error Dev please look into this problem.
Hey guys, I have a Droid 2 (Non-Global) that is currently soft bricked. I have a Motorola factory cable converter (had to use it for my Razr Maxx) that I have plugged into the phone being that its battery is too low. My problem is that when I plug in the phone to the computer, RSD Lite (4.9) won't recognize the device, even though it is in the Bootloader (Error message: Err:A5,70,70,00,1F MEM_MAP Blank Service Req'd). I need to flash a sbf file to the phone so that I can unbrick it. I am fairly familiar with the unbricking process, but only using Droid Razr Utility (for my Maxx), not flashing an sbf using RSD Lite. Can anyone help with this problem?
if it's a Team Black Hat adapter it should work fine
couple of these you can do
did you install Motorola_End_User_Drivers
go to device manager. and look for unknown device
if there is an unknown device, uninstall it, it should be listed as motorola usb device
try a newer rsd lite version like RSD Lite 5.7
or try the ez way, all in one
D2 (a955) 2.3.4/4.5.621 ezSBF & Root
I tried your solution (the drivers and newer version of RSD Lite) but it still won't work. I might have to resort to the other option if nothing else works... When I plug in my phone to the computer it is recognized by the comp, but not by RSD Lite. I looked in the Device Manager and the device is listed under Motorola USB Device > Motorola Flash Interface.
D2 must say
battery ok
ok to program
Transfer Mode:
USB
Click to expand...
Click to collapse
even with the errors and usb factory cable converter
It does say that. The full screen shows:
Bootloader
D2.37
Err:A5,70,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to Program
Transfer Mode:
USB
Click to expand...
Click to collapse
I noticed that RSD Lite does not show my Razr Maxx as well, even though it's fully booted.
try the ezSBF or a different pc
Hello folks,
Ive written beforehand in here asking for a little issue I had with my milestone 2 (Assuming a dead usb port and a bootloop)
anyway I got replaced the USB connector, but My phone wont show up on RSD lite... No matter what version I use (tried everything from 4.9 to the latest, nor the drivers.) Im on win 7 ultimate x64, but tried on ubuntu, win xp and win 7x32 having no success.
The phone WONT charge over usb, even with it's usb port replaced.
Teh phone will enter stock recovery, and bootloader mode ( it´s on 07.12)
The phone will also recognize it is "connected" on bootloader (It reads USB Connected OK to program), but the PC wont recognize it.
any suggestions???
may I have to flash it with a "box"??
donlloreda said:
Hello folks,
Ive written beforehand in here asking for a little issue I had with my milestone 2 (Assuming a dead usb port and a bootloop)
anyway I got replaced the USB connector, but My phone wont show up on RSD lite... No matter what version I use (tried everything from 4.9 to the latest, nor the drivers.) Im on win 7 ultimate x64, but tried on ubuntu, win xp and win 7x32 having no success.
The phone WONT charge over usb, even with it's usb port replaced.
Teh phone will enter stock recovery, and bootloader mode ( it´s on 07.12)
The phone will also recognize it is "connected" on bootloader (It reads USB Connected OK to program), but the PC wont recognize it.
any suggestions???
may I have to flash it with a "box"??
Click to expand...
Click to collapse
Either your USB port got replaced badly, or you don't have the drivers: http://www.motorola.com/staticfiles/Support/Experiences/Global_Drivers/USB_Drivers_bit_4.7.1.zip
Try a different cable, diferent port, different computer...
Hey Guys,
I'm having trouble with my A953 Milestone 2.
I installed that awesome JB rom and I am now trying to get back to stock.
For some reason my milestone shows up as a UNKNOWN DEVICE via USB. I can't seem to charge it when plugged into a wall charger.
When booted into jellybean it SAYS its charging, but isn't
When I connect the Milestone 2 to my computer and run RSD Lite to flash a new rom I can't seem to get my PC to recognize the device correctly.
Any ideas?
Thanks very much for your help guys.
Bad USB cable?
thiagomtl said:
Bad USB cable?
Click to expand...
Click to collapse
I've tried several different computers and usb cables and operating system.
Its not the cable.
I once have a similar issure. The PC dont recognize my MS2 with CM9. I fixed it with following steps.
1. Install Moto driver in PC
2. Install RSD lite
3. Resart the phone into AP Fastboot mode.
4. Flash stock ROM
5. Root it and flash custon ROM
I have a motorola defy mb525 (red lens). It is bricked, battery is at 80%. So, i wanted to flash a sbf on it (i wiped data and cache in stock recovery) but after i enter in the bootloader and connect it to my pc (win 8.1) rds doesn't see any connected phone. I tried all version of rds lite and motorola drivers but nothing changed. Can anyone help me? Please
remix96 said:
I have a motorola defy mb525 (red lens). It is bricked, battery is at 80%. So, i wanted to flash a sbf on it (i wiped data and cache in stock recovery) but after i enter in the bootloader and connect it to my pc (win 8.1) rds doesn't see any connected phone. I tried all version of rds lite and motorola drivers but nothing changed. Can anyone help me? Please
Click to expand...
Click to collapse
I have the same problem. :crying:
I tried to update to CM10.2 and made some mistake. After several trials and hard reserts I am only able to enter boot menu with POWER On und VOL UP. If I connect cableto phone, this recgnises it as cnnected, but RDS does not see my phone and I can not flash. I am also on WIN 8.1.
Try to launch RDS as administrator, it may help you.
Stoku said:
Try to launch RDS as administrator, it may help you.
Click to expand...
Click to collapse
I tried it too but doesn't helps
What does your bootloader says? It should look like this:
Code:
Bootloader
09.10
Battery OK
OK to Program
Connect USB
Data Cable
Then after plug USB, Windows should recognize your Defy. If not, there should be problem with your drivers.
To enter bootloader, turn your phone off, press power on for a sec with Vol+ (don't release Vol+) then after 5seconds press power again.
Stoku said:
What does your bootloader says? It should look like this:
Code:
Bootloader
09.10
Battery OK
OK to Program
Connect USB
Data Cable
Then after plug USB, Windows should recognize your Defy. If not, there should be problem with your drivers.
To enter bootloader, turn your phone off, press power on for a sec with Vol+ (don't release Vol+) then after 5seconds press power again.
Click to expand...
Click to collapse
Yes, i know. And when i connect it to pc with usb, it says:
Code:
Bootloader
09.10
Battery OK
OK to Program
Transfer Mode:
USB
But i still can't do anything.
remix96 said:
Yes, i know. And when i connect it to pc with usb, it says:
Code:
Bootloader
09.10
Battery OK
OK to Program
Transfer Mode:
USB
But i still can't do anything.
Click to expand...
Click to collapse
I have the same behavior
I tried once more adviced process and now I could repair my phone!
It is definitely needed not only to run Windows as user with administrator rights, but also to set the aplication RST to run as administrator, as adviced in this thread. This can by made with right click on shortcut of RST Lite - select Options - Compatibility - and check Run aplication as administrator.
The description of steps to set must not be 100% correct, I am using another language version of windows.
But, the process worked now for me!
Thanks to everybody who helped and adviced us!
Now I am running stock Froyo 2.2 CEE and want to use Cyanogenmod 10.2
I can not start bootloader with custom recovery when pressing PWR and VOL- anymore. How should I proceed?
PeLo02 said:
I tried once more adviced process and now I could repair my phone!
I can not start anymore bootloader with custom recovery when pressing PWR and VOL-. How should I proceed?
Click to expand...
Click to collapse
To enter custom recovery, turn your phone on, and when blue led appears (around motorola logo), press vol- once.
Stoku said:
To enter custom recovery, turn your phone on, and when blue led appears (around motorola logo), press vol- once.
Click to expand...
Click to collapse
Not working, I get not led during starting phone. And if I press PWR On and VOL- simultaneously, I get triangel with ! and green android figure and phone stops.
PeLo02 said:
Not working, I get not led during starting phone. And if I press PWR On and VOL- simultaneously, I get triangel with ! and green android figure and phone stops.
Click to expand...
Click to collapse
Have you installed 2ndinit and the recovery? Download this - http://forum.xda-developers.com/attachment.php?attachmentid=1022582&d=1335285945, install it on your phone and open the app. Then press the "install bootmenu" button. Reboot, and when you get blue LED, immediately press volume down.
I assume you have rooted your phone.
PeLo02 said:
Not working, I get not led during starting phone. And if I press PWR On and VOL- simultaneously, I get triangel with ! and green android figure and phone stops.
Click to expand...
Click to collapse
It seems that you don't have custom recovery installed and this is a stock one. To flash any custom rom, you have to root and install a custom recovery first. Root eg. with SuperOneClick, install and open 2nd init, then enter 2nd init recovery (VOL DOWN on blue LED) and install TWRP revocery package. TWRP is needed for new roms.
SOLVED!
Today i tried to install sbf with another pc that uses win xp. The installation was fine, it instantaenly recognized my defy
So, i think that RSD can' t work properly on 8.1. Now i am on CM11
remix96 said:
Today i tried to install sbf with another pc that uses win xp. The installation was fine, it instantaenly recognized my defy
So, i think that RSD can' t work properly on 8.1. Now i am on CM11
Click to expand...
Click to collapse
Windows XP has a different approach to running applications.
Since windows Vista was released, MS changed the policy of how apps run.
For apps that access crucial resources need Administrator rights(similar to root permissions). RSD Lite is one such application so it requires to run as admin.
DROID RAZR with Tapatalk 4
neo.ank said:
Windows XP has a different approach to running applications.
Since windows Vista was released, MS changed the policy of how apps run.
For apps that access crucial resources need Administrator rights(similar to root permissions). RSD Lite is one such application so it requires to run as admin.
DROID RAZR with Tapatalk 4
Click to expand...
Click to collapse
Heiiiii, can you read?? I said that i've tried a lot of times to run as admin, but it doesn't change anything!
@remix96:
Have you tried to run RSDLite on Windows 8 in compatibility mode with Windows XP? On Windows 7 64bit it works perfectly.
thrackanomir said:
@remix96:
Have you tried to run RSDLite on Windows 8 in compatibility mode with Windows XP? On Windows 7 64bit it works perfectly.
Click to expand...
Click to collapse
Yes, i tried with xp sp2 and sp3.
thrackanomir said:
@remix96:
Have you tried to run RSDLite on Windows 8 in compatibility mode with Windows XP? On Windows 7 64bit it works perfectly.
Click to expand...
Click to collapse
RSD works on 8.1 and it doesn't need any compatibility modes.
@remix96: nice to hear that you've solved your problem
Stoku said:
RSD works on 8.1 and it doesn't need any compatibility modes.
@remix96: nice to hear that you've solved your problem
Click to expand...
Click to collapse
Works? Can you tell me with which version of rsd and drivers?
remix96 said:
Works? Can you tell me with which version of rsd and drivers?
Click to expand...
Click to collapse
Yep, it works. RSD v5.6, I'm not sure about drivers, but probably newest ones.
It's what I found in my downloads dir:
Code:
Motorola Device Manager 2.4.5
Flashtool 0.9.0.0