I have now my X2, generic_SG. It gets into bootloader moder easy but then it is not recognized my the pc or SEUS.
When I got it, and during drivers where installed upon connection the usb, it was recognized. But now, no more. So I cannot use the SEUS service even though its in bootloader mode!
I only read about people not able to get into bootloader mode, but in my case, very strange. Any help?
I had the same problem.I just change the usb cable and put in directly to pc and now is everthing ok.
What do you mean 'direct in pc'? One had to plug it always in the pc !?!
And I am using the SE provided cable. Perhaps I will try a different one but I don't think its the cable as it work fine sync'in with pc. Just in bootloader mode its a no go.
Tried today with another computer. Both have Win7 Ultimate.
Also tried 'another' cable / cables but same issue remains!
since around a week ago my phone has not been able to connect to the usb ,
it does still charge via usb cable from the pc but the cable is not detected for mass storage ,kies or usb debug .
i know drivers are ok on pc as my wifes phone still connects fine .
is there any way to test that the usb socket is broken internally
i am haing same prob here after flashing a rom
just backing phone up with clockwork mod then going to do a factory restore to see if it cures the problem ,dont think it will but i can but try . device doesnt even go into mtp ? mode .
even in clockwork recovery when the usb is mounted as mass storage it isnt detected
well tried that no success , cant send phone back as cant factory restore it as i cant connect to odin. by the way what rom are you running and what version of galaxy have you got 8gb or 16gb
jona29 said:
just backing phone up with clockwork mod then going to do a factory restore to see if it cures the problem ,dont think it will but i can but try . device doesnt even go into mtp ? mode .
even in clockwork recovery when the usb is mounted as mass storage it isnt detected
well tried that no success , cant send phone back as cant factory restore it as i cant connect to odin. by the way what rom are you running and what version of galaxy have you got 8gb or 16gb
Click to expand...
Click to collapse
Have you tried the debugging mode?
EDIT : Try installing the usb drivers from my signature.
ive tried debugging mode no different , i can even select - deselect usb debugging whist the usb cable is connected .
the usb drivers from your sig are for windows x64
my wifes galaxy s is detected by the computer fine ,same usb cable and port
jona29 said:
ive tried debugging mode no different , i can even select - deselect usb debugging whist the usb cable is connected .
the usb drivers from your sig are for windows x64
my wifes galaxy s is detected by the computer fine ,same usb cable and port
Click to expand...
Click to collapse
What OS are you running?
windows 7 32 bit
galaxy s 16gb with darkys v8 gingerbread (previously darkys version 6)
Can't you get hold of a friend's usb cable?
hi i have multiple usb cables here 2 original samsung galaxy cables plus multiple other micro usb cables . non of which work with the phone . not to sound ignorant but dont you think i have tried the obvious things first ?
Try a wipe/reset
If that doesnt work, try an other rom .... Stock or non-darkyy
If that doesnt work, im afraid there is a hardware problem
Sent from my GT-I9000 using XDA App
Cypher_X said:
Try a wipe/reset
If that doesnt work, try an other rom .... Stock or non-darkyy
If that doesnt work, im afraid there is a hardware problem
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
You are funny, their phone is OK, the CABLE doesn't work. Right?
jona29 said:
hi i have multiple usb cables here 2 original samsung galaxy cables plus multiple other micro usb cables . non of which work with the phone . not to sound ignorant but dont you think i have tried the obvious things first ?
Click to expand...
Click to collapse
DID you try to put a RIGHT cable into a WRONG hole???
You are not alone, I have exactly the same problem, but wrote it off as a hardware problem, because it started after my son (9 months and teething) gnawed on the phone for some time...
Sent from my GT-I9000 using Tapatalk
ok tried different roms etc no luck must be hardware related going to open the phone tomorrow and check the usb socket . only really worried incase i need to use odin to recover after a bad flash , or incase the usb decides to die completely and i cant charge the phone
jona29 said:
since around a week ago my phone has not been able to connect to the usb ,
it does still charge via usb cable from the pc but the cable is not detected for mass storage ,kies or usb debug .
i know drivers are ok on pc as my wifes phone still connects fine .
is there any way to test that the usb socket is broken internally
Click to expand...
Click to collapse
Hey Jona29 i had the same problem some time ago i solved it by changing usb port (preferably one direct to motherboard) while pc is off then start it while in download mode and flash with odin.
Good luck bud, i know how frustrating it is
UPDATE ! fixed the phone ,yes it was hardware not software at fault . dissasembled the phone and removed the board with the usb connector on .
heated the board around the connector with a pyro pen to reflow the solder
let it cooled and then reassembled the phone .
powered up phone and connected usb lead ,computer recognised phone and phone recognised usb connection
probably took me 30 mins to complete the task.
better than say a 4 week wait from samsung
jona29 said:
heated the board around the connector with a pyro pen to reflow the solder
Click to expand...
Click to collapse
Slick. I have taken my phone apart for USB problems as well, but I would be scared to try to reflow something on the PBC. The connections are so small.
I have had the USB issue as well but it always seemed to be the cooked ROM iI was using.
Ian
I had the same problem, after using DXJPA ... every time i connected the phone (even in boot mode) i received "USB device not recognized" ... I don't know what worked in the end, but i tried a lot of things: I bought a new cable (same problem), I used another computer (same problem), I tried on W7 x64, W7 x32, XP SP3 (same problem), uninstalled and reinstalled Kies, I uninstalled and reinstalled an older version of Kies, changed the phone form a computer to another, played a lot with USB ports ...
After 2-3 hours of pain, Odin saw the phone ... flash it to JPY and no USB problem anymore ...
Maybe this will help someone
mik3y007 said:
I had the same problem, after using DXJPA ... every time i connected the phone (even in boot mode) i received "USB device not recognized" ... I don't know what worked in the end, but i tried a lot of things: I bought a new cable (same problem), I used another computer (same problem), I tried on W7 x64, W7 x32, XP SP3 (same problem), uninstalled and reinstalled Kies, I uninstalled and reinstalled an older version of Kies, changed the phone form a computer to another, played a lot with USB ports ...
After 2-3 hours of pain, Odin saw the phone ... flash it to JPY and no USB problem anymore ...
Maybe this will help someone
Click to expand...
Click to collapse
have the same problem..
tried everything.. i dont dare to reflow my phone..
Hi guys
I recently bought a defy plus (bl7) , rooted it and installed ms2ginger. Since yesterday it's USB is not working for data transfer or anything except for charging, the device wont charge even using the data cable, however it charges through a charger. I want to get it repaired since it's under warranty, but with custom ROM i can't. I have a stock sbf file with me, but it can't be flashed with no working USB. Is there any way to flash custom sbf through the recovery..?
things i have tried :
Used different USB cables
Tried on ubuntu, arch linux, windows xp, windows 7
Try this: http://forum.xda-developers.com/showpost.php?p=31062260&postcount=2
Does it charge on the usal power supply? If yes, get CM7 zip on your sd-card and flash it in cwm!
panhans said:
Try this: http://forum.xda-developers.com/showpost.php?p=31062260&postcount=2
Does it charge on the usal power supply? If yes, get CM7 zip on your sd-card and flash it in cwm!
Click to expand...
Click to collapse
well, it does charge, but it doesnot really detect a USB cable connected to computer, it just gets the screenlight on, thats it. there is no option to choose which mode i want to connect it as... it charges only from the charger, and for USB connected to computer, it wont even charge, just gets the screen light on.
Even if i boot from recovery and mount my sdcard, it still doesnt shows up on computer.
Update : RSDLite detects it, flashed my stock sbf over it, i hope if i get a warranty.. but weird thing is.. if RSDLite works.. why not usb works on PC.. i tried this with linux and windows both, in linux it doesnt even populate this device in /dev node.. this is really weird, even stock firmware doesnt detect USB, doesnt even charges from it.. just gets the backlight on.. rest it charges through the charger. totally confused..
avinash.verma.hbk said:
Update : RSDLite detects it, flashed my stock sbf over it, i hope if i get a warranty.. but weird thing is.. if RSDLite works.. why not usb works on PC.. i tried this with linux and windows both, in linux it doesnt even populate this device in /dev node.. this is really weird, even stock firmware doesnt detect USB, doesnt even charges from it.. just gets the backlight on.. rest it charges through the charger. totally confused..
Click to expand...
Click to collapse
Another update, lsusb on linux lists the device, RSDLite always detects it..and it does let me flash perfectly.. on phone it occasionally detects USB... whenever it does not, if i toggle ADB option in settings, it shows that USB is connected in status bar, however setting value there has no change, but SOMETIMES it does detect the USB.. i dont think its a hardware fault, if it was it wouldnt be detected by RSDLite...
i have tried changing the rom too, tried ms2ginger, stock, and Cyanogenmod 9 and 10.. all give the same issue.. only one advantage i get in Cyanogenmod is that it charges over USB, that's it.. it detects it as a charger...
In recovery menu as well i cant mount it.. Please Help.. anyone? :crying:
By the way this issue is similar to this one :
but the solution doesnt work for me as i dont get phoneutils with that combo
blog.vacs.fr/index.php?post/2010/12/24/How-to-repair-the-USB-not-detected-problem-on-Android-Samsung-phones
Please ask all questions in the Q&A section. Thread moved there.
Hey Guys,
I'm having trouble with my A953 Milestone 2.
I installed that awesome JB rom and I am now trying to get back to stock.
For some reason my milestone shows up as a UNKNOWN DEVICE via USB. I can't seem to charge it when plugged into a wall charger.
When booted into jellybean it SAYS its charging, but isn't
When I connect the Milestone 2 to my computer and run RSD Lite to flash a new rom I can't seem to get my PC to recognize the device correctly.
Any ideas?
Thanks very much for your help guys.
Bad USB cable?
thiagomtl said:
Bad USB cable?
Click to expand...
Click to collapse
I've tried several different computers and usb cables and operating system.
Its not the cable.
I once have a similar issure. The PC dont recognize my MS2 with CM9. I fixed it with following steps.
1. Install Moto driver in PC
2. Install RSD lite
3. Resart the phone into AP Fastboot mode.
4. Flash stock ROM
5. Root it and flash custon ROM
Hi guys,
i have currently problem with my LG G2 D802 32GB.
Description:
- Android CM11 works (installed via TWRP)
- TWRP 2.6.3.3 works
- But now i am trying to flash stock firmware via downlaod mode (volume up then plug in usb cable). But there is some problem with download mode. Last what i can see is this screen: i1.ytimg.com/vi/kcFtnZZ7I1U/hqdefault.jpg
My PC don't recognize USB device i think (no USB sound in Windows, no new device in Device manager). Something is wrong. I tried to install USB drivers from tutorials to my PC (Win 8.1 64b or Win 7 64b), but no change. And cable is ok (have two USB cables). Maybe i have wrong drivers?
Could you advise me please?
Thank you in advance... I'm desperate
mel0un said:
Hi guys,
i have currently problem with my LG G2 D802 32GB.
Description:
- Android CM11 works (installed via TWRP)
- TWRP 2.6.3.3 works
- But now i am trying to flash stock firmware via downlaod mode (volume up then plug in usb cable). But there is some problem with download mode. Last what i can see is this screen: i1.ytimg.com/vi/kcFtnZZ7I1U/hqdefault.jpg
My PC don't recognize USB device i think (no USB sound in Windows, no new device in Device manager). Something is wrong. I tried to install USB drivers from tutorials to my PC (Win 8.1 64b or Win 7 64b), but no change. And cable is ok (have two USB cables). Maybe i have wrong drivers?
Could you advise me please?
Thank you in advance... I'm desperate
Click to expand...
Click to collapse
Try plugging your phone to the back USB Ports on your computer.
sometimes does front ports are not capeble for diffrent actions.
Harellevy said:
Try plugging your phone to the back USB Ports on your computer.
sometimes does front ports are not capeble for diffrent actions.
Click to expand...
Click to collapse
I have only 2 notebooks. I tried several ports (usb 2.0 or 3.0) and nothing.
I think there is problem with some partititon in my G2. But what partition i should flash to repair my phone?
My accelerometer and compass doesn't work too in CM 10.2 stable. Maybe it has a connection...