Database Users

USB problem with HTC Desire HD

Hey guys,
I currently recently installed a custom ROM from this website and for some reason now when I plug in my USB into my PC it comes up not being detected so when I put my phone as hard drive so I want to transfer music, it doesn't detect it. Can anybody help me if this is ROM problem or just my USB?

Hey,
Okay I disabled USB debugging didn't know it was on, still doesn't work says windows cannot find USB device not reconginzed when I connect the USB. For the Reinstalling usb driver I do not know how to this ~?

i have the same problem.. turn "fast boot" off and restart the phone.. this always works for me.. hope this helps

Hey, I turned fastboot off. Doesn't work. I ordered new usb cable.. hopefully this works and it was just a fault with the cable!
Sent from my Desire HD using XDA App

Usually this is a problem with the cable. Simple, cheap to fix. Keep your old cable around for charging though (nice to have a spare)

Is this problem with the USB still active?
If so try a different PC just in order to eliminate WinOS issues.
If not close.

Hi,
I have the same problem at some months ago. I tried the cable and pfone on another PC, and it works fine. So, I recommend to try it on another PC and reinstall your Windows.
brgs,
Herold

Had the same propblem! Turns out it was the usb cable, it charged fine with the cable but data transfer didnt work.

i also had the same problem since last week and still cant resolve till now...i try all the option that u gave(change cable/pc,turn off fastboot)....i even sent my phone to shop and they still cant detect.they said maybe the usb port is damage or some software that may block my usb port?is it true? anyone can help?????

necrs said:
i also had the same problem since last week and still cant resolve till now...i try all the option that u gave(change cable/pc,turn off fastboot)....i even sent my phone to shop and they still cant detect.they said maybe the usb port is damage or some software that may block my usb port?is it true? anyone can help?????
Click to expand...
Click to collapse
What happened last week? Is that when you got the phone? Or installed a different rom? etc.

Grant Barker said:
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Click to expand...
Click to collapse
before this is ok.just last week i remember that i pull the usb cable from the phone quite hard.but i don think that the usb too sensitive that will break by that.still can charging... but not detected in pc

I had similar problem and it was hardware, I sent it back to Vodafone and they sent me a replacement!
I am running CM7 now its awesome.
Andy

USB BRICK in my INSPIRE 4G ( DESIRE HD)
Hi, all
I got a new inspire 4g last week.( equivalent to desire hd ). It was working fine. But now it does not detect the USB connection. It only charges when I connect to pc. No other issues. I have also noticed that during fast boot mode also pc does not recognize the phone as device. I have tried all the suggestion on xda but no luck.
As fastboot is also not detected by PC I could not format mtd0 and reconfigure it.
Can anybody have any other idea? If I change the main board how much cost will incur ??
Thanks all.
Grant Barker said:
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Click to expand...
Click to collapse

musarraf172 said:
Hi, all
I got a new inspire 4g last week.( equivalent to desire hd ). It was working fine. But now it does not detect the USB connection. It only charges when I connect to pc. No other issues. I have also noticed that during fast boot mode also pc does not recognize the phone as device. I have tried all the suggestion on xda but no luck.
As fastboot is also not detected by PC I could not format mtd0 and reconfigure it.
Can anybody have any other idea? If I change the main board how much cost will incur ??
Thanks all.
Click to expand...
Click to collapse
First of all.. you have HTC Sync installed right?
Happened to me initially as well.. although for me changing the cable and/or changing the USB port on the PC solved the issue. Have you tried these?
Also sometimes killing all apps on the device before connecting helped.
You can try accessing your device through ADB to see if its being detected.
And I really dont think you'll need to change the main board..

USB brick on my Inspire 4G
Thanks for your reply. When I go the phone ADB and Fastboot were working
well. There was no driver issue. Now even PC also does not detect the phone or any new hardware when I connect it to pc. I had working fastboot on both win7 and Linux (ubuntu) pc. Now in both OS the phone is not detectable. Windows device manager does not see any new hardware when I connect my inspire . dmesg also does not show my hardware when I connect my inspire to linux pc.
Please help or suggest me to investigate further. I know how to install and work with adb and fastboot as well as Clockwork recovery ( also ext recovery). Some people suggested to flash a new radio. I can flash the new radio via sdcard. But how safe is it ? My phone is S-off and made unbranded. Will flashing a new radio make my phone locked AT&T again? ????
Thanks a lot
if4ct0r said:
First of all.. you have HTC Sync installed right?
Happened to me initially as well.. although for me changing the cable and/or changing the USB port on the PC solved the issue. Have you tried these?
Also sometimes killing all apps on the device before connecting helped.
You can try accessing your device through ADB to see if its being detected.
And I really dont think you'll need to change the main board..
Click to expand...
Click to collapse

As far as I know.. USB problem has no relation whatsoever to Radio. Radio is only concerned with the signal stuff. Flashing it isn't that risky if you follow the instructions... There's a thread in the development section about Radio's which explains it pretty nicely.
As for the USB problem, are you using a Custom ROM? Some ROMs like LeeDroid have USB detection problem which can be solved simply by flashing a different kernel like LordMod's.
What I meant by "Accessing through ADB" was if commands like "adb remount" or any adb command as such are working when your phone is connected to the PC? Or is it showing "error: device not found"?

[Q] Windows will not recognize Note 3 anymore, help please!

Hey guys,
Just recently, my PC and any other PC Ive tried for that matter will not recognize my Note 3. I had Windows 7 and it worked fine for months, then just the other day it came up on the bottom as USB Device Not Recognized, and no matter what I do it will not do so. Yesterday, I upgraded to Windows 8.1 and still the same result. I have installed Kies 3, uninstalled and resintalled Samsung drivers and still nothing. I am running a custom rom in the stock slot using Safestrap...is it possible that that might have messed up something? Even when the cord is plugged into the PC, the phone doesnt come up with anything notification that it's plugged in, but it does say it is charging. If any of you have any tips or something please help because I am at my wits end.
Thanks

Have you tried with another cord?
Computer doesn't see device... Device doesn't detect plug in... Sounds like a bad USB cord

b00mb00mchuck said:
Have you tried with another cord?
Computer doesn't see device... Device doesn't detect plug in... Sounds like a bad USB cord
Click to expand...
Click to collapse
Yes, actually I have and still nothing...forgot to mention that in the original post.
It's a strange problem which leads me to believe that something has gone wrong in the phone, or that I caused something to go wrong by flashing a rom or three, since it did work previously. Unfortunately, I'm at status: Custom, although my Knox is 0x0.

When you dial ##366633# is it disabled?
Sent from my Galaxy Note 3

mexiking713 said:
When you dial ##366633# is it disabled?
Sent from my Galaxy Note 3
Click to expand...
Click to collapse
Yes, this shows as disabled. What should this be?

Can't help you solve your problem, but last night I had a hiccup where I plugged my (17 day old) N3 into my computer in a USB2 port and ... nothing at all. (As if it were electrically disconnected - no "unknown devices" showing)
Tried it in a different USB2 port, and ... nothing.
Tried in in a USB 3.0 port - same computer, same OEM cord - and everything was fine. As far as I knew, nothing had changed on either end of things, although the previous evening I had used a different OTG cable for a USB key with the phone, and I had also had a automatic update of the Samsung Push Service on the phone. Nothing had been plugged into the PC's usb ports since it's prior cold boot. (Win 7 x64 Pro).
This morning (both PC and phone have been rebooted), everything is back to normal - both on the phone and the PC. Both the USB2 and USB3 ports all seem fine.
Ugh. Makes me nervous - brand new hardware.

Boot into Odin mode THEN plug the device in, let windows find the drivers for it then once that's done, reboot the phone regularly and see if it works then. It appears to be an issue with most to ALL Samsung devices, but this worked for my wife's galaxy S3 when the computer wouldn't recognize it and the phone didn't detect a PC connection.
Sent from my SM-N900V using xda app-developers app

pmt223 said:
Hey guys,
Just recently, my PC and any other PC Ive tried for that matter will not recognize my Note 3. I had Windows 7 and it worked fine for months, then just the other day it came up on the bottom as USB Device Not Recognized, and no matter what I do it will not do so. Yesterday, I upgraded to Windows 8.1 and still the same result. I have installed Kies 3, uninstalled and resintalled Samsung drivers and still nothing. I am running a custom rom in the stock slot using Safestrap...is it possible that that might have messed up something? Even when the cord is plugged into the PC, the phone doesnt come up with anything notification that it's plugged in, but it does say it is charging. If any of you have any tips or something please help because I am at my wits end.
Thanks
Click to expand...
Click to collapse
Did you fix this problem?

Thank you! Worked perfectly!

I have the same problem, do you have any solutions ? Thanks.

I too have been struggling with this problem. The is no USB symbol in the notifications area on my phone whether I plug into to my computer at work (Win7) or at home (Win7), using a usb3 cable or a usb2 cable. Its as if there was a setting on my phone that allows recognition when plugged into a computer that has been turned off.Is there such a setting? I would love some help on this as well. Thanks in advance! I am rooted with towel root and have had no problems until last week. When I look in the device manager on my computer it shows :
SAMSUNG Android Phone
SAMSUNG Android ADB interface
I tried uninstalling the above and then plugging my phone back in and it re-installs the same driver shown above.
For what it is worth here are the drivers for SAMSUNG Android ADB Interface:
c:\windows\system32\DRIVERS\winusbsys
c:\windows\system32\WdfCoinstaller01007.dll
c:\windows\system32\WinUSBCoinstaller.dll
Should I be using different drivers ? Thanks|!

please help!
any solution yet? i have same problem, no usb detection and camera wont work i want to flash stock rom whit odin but i cant get the computer to recognize my phone...

I was able to fix the usb recognition problem. i had to do a factory restore. I lost root but gained usb recognition AND the Over the Air update to 4.4.4 and patiently awaiting the update to 5.0 hopefully this month!

[SOLVED][HELP] USB issue. Cant connect Odin or Sending file

Okay, Here my problem since my phone got drown. After fixed it with my way (Internet yeah), everthing seems work except Usb. The problem are when connect it via usb to my pc (already installed samsung driver) in notif of my phone doesnt show usb connect or usb debugging but it just charging like normal. Tried to flash via odin buit device doesnt appear and yeah in my pc doesnt said its not recognized (Usb doesnt recognized or something like that). Hopefully it will be fixed without bring it to service center.
Thanks before...
SOLUTION
First
marcussmith2626 said:
the device might have trouble enumerating especially in windows 8.1
plug it in as normal
then plug any other usb dongle in like a wireless mouse thats already been installed
this will force windows into enumerating the device
if it doesnt work then most likely the port is damaged due the water damage it suffered
Click to expand...
Click to collapse
And then...
marcussmith2626 said:
if it now shows in the device manager right click on it and update drivers
select the folder which has the samsung usb drivers or manually install them from the list
Click to expand...
Click to collapse
Extra....
marcussmith2626 said:
iv got windows 8.1 and had same problem
install the samsung usb drivers
put phone into download mode
push up to start connection and it should install drivers
the problem i had was mass storage and that was then solved by pluging the phone in (plug it in after the phone has booted) and then plugging in any other usb dongle
it then says in the status bar usb connected and you then you can select connect to pc and the pc will then install the drivers
Click to expand...
Click to collapse
Credit : @marcussmith2626

VillaVor said:
Okay, Here my problem since my phone got drown. After fixed it with my way (Internet yeah), everthing seems work except Usb. The problem are when connect it via usb to my pc (already installed samsung driver) in notif of my phone doesnt show usb connect or usb debugging but it just charging like normal. Tried to flash via odin buit device doesnt appear and yeah in my pc doesnt said its not recognized (Usb doesnt recognized or something like that). Hopefully it will be fixed without bring it to service center.
Thanks before...
Click to expand...
Click to collapse
have u installed some app recently after which this problem occour
if not the problem is with the usb port of pc
or the usb port of the phone

abhishekr700 said:
have u installed some app recently after which this problem occour
if not the problem is with the usb port of pc
or the usb port of the phone
Click to expand...
Click to collapse
No...
the proble isnt from usb port of my pc and usb cable too (tested it with another device)
i think my phone's usb port :crying:
any solution ?

VillaVor said:
No...
the proble isnt from usb port of my pc and usb cable too (tested it with another device)
i think my phone's usb port :crying:
any solution ?
Click to expand...
Click to collapse
phone's usb port is a hardware problem
you have to get it replaced at the service centre........
BTW i wouldn't mind if u press that thanks button

abhishekr700 said:
phone's usb port is a hardware problem
you have to get it replaced at the service centre........
BTW i wouldn't mind if u press that thanks button
Click to expand...
Click to collapse
yeah, service center
haha thanks pressed dude

VillaVor said:
Okay, Here my problem since my phone got drown. After fixed it with my way (Internet yeah), everthing seems work except Usb. The problem are when connect it via usb to my pc (already installed samsung driver) in notif of my phone doesnt show usb connect or usb debugging but it just charging like normal. Tried to flash via odin buit device doesnt appear and yeah in my pc doesnt said its not recognized (Usb doesnt recognized or something like that). Hopefully it will be fixed without bring it to service center.
Thanks before...
Click to expand...
Click to collapse
the device might have trouble enumerating especially in windows 8.1
plug it in as normal
then plug any other usb dongle in like a wireless mouse thats already been installed
this will force windows into enumerating the device
if it doesnt work then most likely the port is damaged due the water damage it suffered

marcussmith2626 said:
the device might have trouble enumerating especially in windows 8.1
plug it in as normal
then plug any other usb dongle in like a wireless mouse thats already been installed
this will force windows into enumerating the device
if it doesnt work then most likely the port is damaged due the water damage it suffered
Click to expand...
Click to collapse
As you said i am in windows 8.1 right now, and already tried just a minute ago
that result is my pc always notif me "Usb device not recognized" hell yeah my pc still can read this is a device again :good:
As i said Usb device not recognized and then what should i do ?
Thanks for your experience :fingers-crossed:

VillaVor said:
As you said i am in windows 8.1 right now, and already tried just a minute ago
that result is my pc always notif me "Usb device not recognized" hell yeah my pc still can read this is a device again :good:
As i said Usb device not recognized and then what should i do ?
Thanks for your experience :fingers-crossed:
Click to expand...
Click to collapse
if it now shows in the device manager right click on it and update drivers
select the folder which has the samsung usb drivers or manually install them from the list

Ahh..... ah... ah.... Finally !! after plug it in my other pc (Windows xp) device working like normal again ....
Odin i'm coming !! Cant wait for clean install again
@marcussmith2626 Thanks ....
Really a 'Recognized Contributor' !!
Edit : Ok. trying as you said for this pc sir !!

VillaVor said:
Ahh..... ah... ah.... Finally !! after plug it in my other pc (Windows xp) device working like normal again ....
Odin i'm coming !! Cant wait for clean install again
@marcussmith2626 Thanks ....
Really a 'Recognized Contributor' !!
Edit : Ok. trying as you said for this pc sir !!
Click to expand...
Click to collapse
iv got windows 8.1 and had same problem
install the samsung usb drivers
put phone into download mode
push up to start connection and it should install drivers
the problem i had was mass storage and that was then solved by pluging the phone in (plug it in after the phone has booted) and then plugging in any other usb dongle
it then says in the status bar usb connected and you then you can select connect to pc and the pc will then install the drivers

marcussmith2626 said:
iv got windows 8.1 and had same problem
install the samsung usb drivers
put phone into download mode
push up to start connection and it should install drivers
the problem i had was mass storage and that was then solved by pluging the phone in (plug it in after the phone has booted) and then plugging in any other usb dongle
it then says in the status bar usb connected and you then you can select connect to pc and the pc will then install the drivers
Click to expand...
Click to collapse
Haha yeah just follow your instructions was surprises me for long time waiting.... one week exactly :silly::silly:
Coincidental that problem due from windows 8.1
Ok. Done edited post #1

VillaVor said:
Haha yeah just follow your instructions was surprises me for long time waiting.... one week exactly :silly::silly:
Coincidental that problem due from windows 8.1
Ok. Done edited post #1
Click to expand...
Click to collapse
it took me months to figure that one out - even microsoft and samsung hadnt got any ideas
its because windows 8.1 has changed the usb stack and requires that all drivers be digitally signed and has an identifer that the bios can read
this means some old usb device didnt work unless they met condition already although new drivers became available for most things but for some reason samsung havent updated their usb drivers in years (May 5, 2011 is last officall release) so im guessing thats why it doesnt fully work in windows 8.1 and im sure the problem is because its not properly signed so the device fails to enumerate unless you do the plugging in another usb device
other old phones work fine like htc and new samsung phones also work fine so its properly just a strange issue with the way the galaxy y handles usb

marcussmith2626 said:
it took me months to figure that one out - even microsoft and samsung hadnt got any ideas
its because windows 8.1 has changed the usb stack and requires that all drivers be digitally signed and has an identifer that the bios can read
this means some old usb device didnt work unless they met condition already although new drivers became available for most things but for some reason samsung havent updated their usb drivers in years (May 5, 2011 is last officall release) so im guessing thats why it doesnt fully work in windows 8.1 and im sure the problem is because its not properly signed so the device fails to enumerate unless you do the plugging in another usb device
other old phones work fine like htc and new samsung phones also work fine so its properly just a strange issue with the way the galaxy y handles usb
Click to expand...
Click to collapse
Classic problem came out again, my galaxy y still unrecognized.
Yes about 2 hours ago i tell you its succes but after that usb never recognized again.

VillaVor said:
Classic problem came out again, my galaxy y still unrecognized.
Yes about 2 hours ago i tell you its succes but after that usb never recognized again.
Click to expand...
Click to collapse
each time you have to repeat the process
unplug phone from computer
plug it back in
plug any other usb dongle in after

marcussmith2626 said:
each time you have to repeat the process
unplug phone from computer
plug it back in
plug any other usb dongle in after
Click to expand...
Click to collapse
Haha as fast as ....
If any other solution please tell me as quick as you know.
Okay, will try tomorrow ...

VillaVor said:
Haha as fast as ....
If any other solution please tell me as quick as you know.
Okay, will try tomorrow ...
Click to expand...
Click to collapse
unfortunatly thats the only solution iv found for windows 8.1 - if you restart the phone or remove the usb cable you have to go through the process again of unplugging cable plugging back in then plugging any other usb dongle in after - its the only way iv found for windows 8.1 to enumerate the device

marcussmith2626 said:
unfortunatly thats the only solution iv found for windows 8.1 - if you restart the phone or remove the usb cable you have to go through the process again of unplugging cable plugging back in then plugging any other usb dongle in after - its the only way iv found for windows 8.1 to enumerate the device
Click to expand...
Click to collapse
Still no luck, it always showed doesnt recognized, even other pc and laptop (Win8.1, Win8, WinXp). I think its hardware problem

VillaVor said:
Still no luck, it always showed doesnt recognized, even other pc and laptop (Win8.1, Win8, WinXp). I think its hardware problem
Click to expand...
Click to collapse
if its not detecting on xp then its damaged

marcussmith2626 said:
if its not detecting on xp then its damaged
Click to expand...
Click to collapse
Oh ya, first time follow your instruction its succes on windows xp, here is scenario (plug my sgy, plug other device which already installed, notif baloon appear as usb not recognized, plug out sgy, plug in on my other pc which installed os windows xp)
Hmm, seems hopeless for this matter
Will ask google for this classic problem or bring it service center.

[Q] Unable to connect Galaxy Note3 N9005 to PC

I'm having trouble connecting my N9005 to my pc using Windows8. The problem is it does not recognize the phone's storage and is not able to mount it.
I've tried installing Samsung Universal USB Drivers to no avail.
My laptop only has USB2 ports and if I'm correct N9005 utilizes USB v3. Could it be the cause?
I also have the same problem in Ubuntu.
I also tried Samsung Kies and it doesn't work either.
Upon connecting, my PC recognizes that the phone's been connected but it's not able to mount the storage.

NoobSibot said:
I'm having trouble connecting my N9005 to my pc using Windows8. The problem is it does not recognize the phone's storage and is not able to mount it.
I've tried installing Samsung Universal USB Drivers to no avail.
My laptop only has USB2 ports and if I'm correct N9005 utilizes USB v3. Could it be the cause?
I also have the same problem in Ubuntu.
I also tried Samsung Kies and it doesn't work either.
Upon connecting, my PC recognizes that the phone's been connected but it's not able to mount the storage.
Click to expand...
Click to collapse
The Note 3 mounts as an MTP drive. Make sure you have it selected under the drive connection settings on your phone.
In some cases enabling USB Debugging in Developer Settings would allow for the USB to mount.

nicholaschum said:
The Note 3 mounts as an MTP drive. Make sure you have it selected under the drive connection settings on your phone.
In some cases enabling USB Debugging in Developer Settings would allow for the USB to mount.
Click to expand...
Click to collapse
No difference there my friend.

NoobSibot said:
No difference there my friend.
Click to expand...
Click to collapse
By any chance do you have any unknown devices listed in the Computer Management of your computer?
My Note 3 mounts normally

nicholaschum said:
By any chance do you have any unknown devices listed in the Computer Management of your computer?
My Note 3 mounts normally
Click to expand...
Click to collapse
I don't know what really happened but this last time I connected the device, it mounted normally!
But there's still an unknown Mass Storage Controller in my Device Manager.

unable to connect
Hi,
Perhaps W8 assigned the wrong driver...or a bad / damaged usb cable(?)
Try a system restore to an earlier date
I allways connect my mobile device thru wifi and it's fine
Cheers,

USB3 is backwards compatible with USB2, don't worry about that.
Did you try another cable? You can use any microUSB 2.0 cable, it fits into the right side of the USB port. (the small left bit is the USB3 part.)
Did you unlock the screen when you connect the phone? It can't mount the storage, if you use a lockscreen setting other than none or swipe, until you unlock the screen.
Send From My Samsung Galaxy Note 3 N9005 Using Tapatalk

Hello ShadowLea,
I'm having the same problem on my Samsung Note 3 SM-N9005: "USB device not recognized One of the usb devices connected to this computer has malfunctioned...." when I connect it to my USB3 on my laptop.
I tried the toothpick solution (lifting the tongue of the USB connector on my phone), I tried powering down the Laptop and waiting for 30 seconds to fullly discharge the capacitors, I tried changing 3 different USB cables. I tried different USB ports on Laptop (on USB3 I reiceve the error on the remaining 2 USB2 ports the error does not appear but the phone is not seen by Kies nor Odin.
BTW, FYI, the phone is also having battery charging issues: it only charges if pluggged into the laptop and won't charge if connected to the mains via wall charger (tried 3 different chargers, cables, mains sockets: all work with other devices).
I'm trying to flash a new ROM to try to fix the battery chargin problem but if Odin can't recognize the device...
Also, the dial pad code *#7284# which should give access to the Phone Utility (USB settings) is not working - all other dial pad codes work.

ascanio1 said:
Hello ShadowLea,
I'm having the same problem on my Samsung Note 3 SM-N9005: "USB device not recognized One of the usb devices connected to this computer has malfunctioned...." when I connect it to my USB3 on my laptop.
I tried the toothpick solution (lifting the tongue of the USB connector on my phone), I tried powering down the Laptop and waiting for 30 seconds to fullly discharge the capacitors, I tried changing 3 different USB cables. I tried different USB ports on Laptop (on USB3 I reiceve the error on the remaining 2 USB2 ports the error does not appear but the phone is not seen by Kies nor Odin.
BTW, FYI, the phone is also having battery charging issues: it only charges if pluggged into the laptop and won't charge if connected to the mains via wall charger (tried 3 different chargers, cables, mains sockets: all work with other devices).
I'm trying to flash a new ROM to try to fix the battery charging problem but if Odin can't recognize the device...
Also, the dial pad code *#7284# which should give access to the Phone Utility (USB settings) is not working - all other dial pad codes work.
Click to expand...
Click to collapse
im having the same problem..i try to connect my note 3 via USB cable and is not reading the phone... But for me it start happening after I install the X-NOTE build 18... any Idea how to fix this? Or a link?

xganonx said:
im having the same problem..i try to connect my note 3 via USB cable and is not reading the phone... But for me it start happening after I install the X-NOTE build 18... any Idea how to fix this? Or a link?
Click to expand...
Click to collapse
Hi, I have the same problem with X-Note 18. I tried already all stuff, Odin can see my phone but Kies and any other connection option doesnt help

any update?
any update on this? having the same problem, is it due to xnote?

cussyandrew said:
any update on this? having the same problem, is it due to xnote?
Click to expand...
Click to collapse
Nope, X-Note is fine and I'm using v16 right now without problems.
What I think fixed my problem was using a screwdriver on the usb port on the phone.
I tightened the screws a little bit and it was fine after that.

NoobSibot said:
Nope, X-Note is fine and I'm using v16 right now without problems.
What I think fixed my problem was using a screwdriver on the usb port on the phone.
I tightened the screws a little bit and it was fine after that.
Click to expand...
Click to collapse
well it was working fine on xnote 13, however its been giving me this problem since i updated to xnote 18!!
---------- Post added at 04:21 AM ---------- Previous post was at 04:21 AM ----------
NoobSibot said:
Nope, X-Note is fine and I'm using v16 right now without problems.
What I think fixed my problem was using a screwdriver on the usb port on the phone.
I tightened the screws a little bit and it was fine after that.
Click to expand...
Click to collapse
which screws are you talking about btw?

ive found countless times its a duff or cheap micro USB cable.
if you have been using the genuine Samsung one then it may be faulty. But try another cable.
does any other phone connect ok with the same cable?:good:

I had a similar issue with my note 2 a while back
Sent from my GT-N7100 using XDA Premium 4 mobile app

cussyandrew said:
well it was working fine on xnote 13, however its been giving me this problem since i updated to xnote 18!!
---------- Post added at 04:21 AM ---------- Previous post was at 04:21 AM ----------
which screws are you talking about btw?
Click to expand...
Click to collapse
The ones on the USB port when you remove the back cover.

aladinliverpool said:
ive found countless times its a duff or cheap micro USB cable.
if you have been using the genuine Samsung one then it may be faulty. But try another cable.
does any other phone connect ok with the same cable?:good:
Click to expand...
Click to collapse
No it doesn't connect with any other cable, it charges fine though :/

This problem has already been addressed and solved. Its a problem in the kernel. Download a custom kernel if your using X-note 18.
Wallah, Problem fixed

Dizy801 said:
This problem has already been addressed and solved. Its a problem in the kernel. Download a custom kernel if your using X-note 18.
Wallah, Problem fixed
Click to expand...
Click to collapse
can you please provide links to theses custom kernels?.. im not sure which ones to install

moh277 said:
can you please provide links to theses custom kernels?.. im not sure which ones to install
Click to expand...
Click to collapse
Go download x-note v20. they fixed the problem.
HTML:
http://www.nonsolosmartphone.it/x-note-build-18-0-n9005-nf4-t9278.html

[Q] Galaxy S5 CANT FIND USB

Im in England and the phone for S5 for America, how do you find the USB "connection as camera" its not in the notification panel ? im trying to get on Kies, but i cant.

ron101 said:
Im in England and the phone for S5 for America, how do you find the USB "connection as camera" its not in the notification panel ? im trying to get on Kies, but i cant.
Click to expand...
Click to collapse
Do you have the usb drivers installed correctly? Or try another usb port/ cable.

IVE put the USB driver in the c drive along sid the KIES and still it says its (USB) not recognised. Is there something else i could use instead ,i didnt like kies anyway.I tried to get airdroid to work (ive had that for 3 years) but it doesnt handle software (my phone) 4.4.2 it only does 4.3. It says FORBIDEN.FAILED TO SEND MESSAGE on my PC.

Most likely you are using an outdated version of Kies. There are multiple versions of Kies, ensure that you install the latest version of Kies. Then open Kies and have it detect your phone. That is by far the easiest way to install the proper driver for your S5 model. After the driver is in place you can close Kies and never use it again. Or uninstall it if you wish.
Do not use an USB hub, connect directly to your phone. If you have ongoing issues, use a different USB cable and port. Ensure that you are using a data cable, not a charging (only) cable that has the data lines shorted. If your PC has USB driver issues in general, then you'll need to resolve those issues first or use a different PC.
.

fffft said:
Most likely you are using an outdated version of Kies. There are multiple versions of Kies, ensure that you install the latest version of Kies. Then open Kies and have it detect your phone. That is by far the easiest way to install the proper driver for your S5 model. After the driver is in place you can close Kies and never use it again. Or uninstall it if you wish.
Do not use an USB hub, connect directly to your phone. If you have ongoing issues, use a different USB cable and port. Ensure that you are using a data cable, not a charging (only) cable that has the data lines shorted. If your PC has USB driver issues in general, then you'll need to resolve those issues first or use a different PC.
.
Click to expand...
Click to collapse
KIES V3. The trouble is i cant find the USB i now it should be there in the notif panel but it is not, ive got developer options & usb debugging ticked but thats all, have i got to do anything else (hair pulling time) i dont think so?
1) Should i plug it in the mains or usb on the pc
2) Im using the cable that came with the S5 is that good enough.
3) The S5 sits on a cradle shall i take it of.
4) How do i tell data cable, not a charging (only) cable that has the data lines shorted
5) Ive tried 4 different USB software and it gives the message DEVICE DRIVER SOFTWARE WAS NOT SUCCESSFULLY INSTALLED every time
6) Ive done a reboot every time the drivers are put it
ron

ron101 said:
KIES V3. The trouble is i cant find the USB i now it should be there in the notif panel but it is not, ive got developer options & usb debugging ticked but thats all, have i got to do anything else (hair pulling time) i dont think so?
1) Should i plug it in the mains or usb on the pc
2) Im using the cable that came with the S5 is that good enough.
3) The S5 sits on a cradle shall i take it of.
4) How do i tell data cable, not a charging (only) cable that has the data lines shorted
5) Ive tried 4 different USB software and it gives the message DEVICE DRIVER SOFTWARE WAS NOT SUCCESSFULLY INSTALLED every time
6) Ive done a reboot every time the drivers are put it
ron
Click to expand...
Click to collapse
If you use Windows 8(.1) you have to disable driver signature verification to get the usb drivers installed. Here is a tut. https://learn.sparkfun.com/tutorial...abling-signed-driver-enforcement-on-windows-8.

gee2012 said:
If you use Windows 8(.1) you have to disable driver signature verification to get the usb drivers installed. Here is a tut. https://learn.sparkfun.com/tutorial...abling-signed-driver-enforcement-on-windows-8.
Click to expand...
Click to collapse
Noooop its not that i have win 7 pro
ron

You are juggling too many unnecessary variables. Try to simply that and don't skip checking any of the points.
I have no idea what you mean by plug it in the mains? And at least until you solve this you should not be using a cradle, hub or anything else. As I suggested earlier, connect the phone directly to your computer USB hub. And if you have ongoing problems, try a different cable, USB port or even PC.
Making an assumption that the cable that came with the phone is good enough is counter productive. It's not impossible that it may be damaged or have some problem. Borrow or buy another cable, to eliminate one more possible cause of your issue.
Retrace and double check each step. As soon as you make an assumption that it's not worth checking x step because it couldn't possibly be the cause, you are skipping a possible solution. Make sure that you are using the latest Odin, make sure that you installed it from windows administrator mode, connect directly to the PC's USB port, different cable, etc. If you are methodical, you'll resolve the problem.
Good luck
.

Have you activated developer oprions and usb debug?

ron101 said:
IVE put the USB driver in the c drive along sid the KIES and still it says its (USB) not recognised. Is there something else i could use instead ,i didnt like kies anyway.I tried to get airdroid to work (ive had that for 3 years) but it doesnt handle software (my phone) 4.4.2 it only does 4.3. It says FORBIDEN.FAILED TO SEND MESSAGE on my PC.
Click to expand...
Click to collapse
If you haven't given AirDroid permissions to send SMS directly, "FORBIDEN.FAILED TO SEND MESSAGE" might appear. Change the permissions in phone's settings for a try

fffft said:
You are juggling too many unnecessary variables. Try to simply that and don't skip checking any of the points.
I have no idea what you mean by plug it in the mains? And at least until you solve this you should not be using a cradle, hub or anything else. As I suggested earlier, connect the phone directly to your computer USB hub. And if you have ongoing problems, try a different cable, USB port or even PC.
Making an assumption that the cable that came with the phone is good enough is counter productive. It's not impossible that it may be damaged or have some problem. Borrow or buy another cable, to eliminate one more possible cause of your issue.
Retrace and double check each step. As soon as you make an assumption that it's not worth checking x step because it couldn't possibly be the cause, you are skipping a possible solution. Make sure that you are using the latest Odin, make sure that you installed it from windows administrator mode, connect directly to the PC's USB port, different cable, etc. If you are methodical, you'll resolve the problem.
Good luck
.
Click to expand...
Click to collapse
AFTER last nite i started again this morning (im disabled completely down the right side of my body) with a new spirit fffft i got stuck in.So here we go first i put the USB cable in another usb port (one that i havent used) and the phone came alive and that was that it was done.So i tried another usb cable,that also came alive, so that was that it was the usb port that i was using wasnt suitable simple as that. Thank you for all of your help fffft and the rest it was essential for me THANK YOU.