Okay, Here my problem since my phone got drown. After fixed it with my way (Internet yeah), everthing seems work except Usb. The problem are when connect it via usb to my pc (already installed samsung driver) in notif of my phone doesnt show usb connect or usb debugging but it just charging like normal. Tried to flash via odin buit device doesnt appear and yeah in my pc doesnt said its not recognized (Usb doesnt recognized or something like that). Hopefully it will be fixed without bring it to service center.
Thanks before...
SOLUTION
First
marcussmith2626 said:
the device might have trouble enumerating especially in windows 8.1
plug it in as normal
then plug any other usb dongle in like a wireless mouse thats already been installed
this will force windows into enumerating the device
if it doesnt work then most likely the port is damaged due the water damage it suffered
Click to expand...
Click to collapse
And then...
marcussmith2626 said:
if it now shows in the device manager right click on it and update drivers
select the folder which has the samsung usb drivers or manually install them from the list
Click to expand...
Click to collapse
Extra....
marcussmith2626 said:
iv got windows 8.1 and had same problem
install the samsung usb drivers
put phone into download mode
push up to start connection and it should install drivers
the problem i had was mass storage and that was then solved by pluging the phone in (plug it in after the phone has booted) and then plugging in any other usb dongle
it then says in the status bar usb connected and you then you can select connect to pc and the pc will then install the drivers
Click to expand...
Click to collapse
Credit : @marcussmith2626
VillaVor said:
Okay, Here my problem since my phone got drown. After fixed it with my way (Internet yeah), everthing seems work except Usb. The problem are when connect it via usb to my pc (already installed samsung driver) in notif of my phone doesnt show usb connect or usb debugging but it just charging like normal. Tried to flash via odin buit device doesnt appear and yeah in my pc doesnt said its not recognized (Usb doesnt recognized or something like that). Hopefully it will be fixed without bring it to service center.
Thanks before...
Click to expand...
Click to collapse
have u installed some app recently after which this problem occour
if not the problem is with the usb port of pc
or the usb port of the phone
abhishekr700 said:
have u installed some app recently after which this problem occour
if not the problem is with the usb port of pc
or the usb port of the phone
Click to expand...
Click to collapse
No...
the proble isnt from usb port of my pc and usb cable too (tested it with another device)
i think my phone's usb port :crying:
any solution ?
VillaVor said:
No...
the proble isnt from usb port of my pc and usb cable too (tested it with another device)
i think my phone's usb port :crying:
any solution ?
Click to expand...
Click to collapse
phone's usb port is a hardware problem
you have to get it replaced at the service centre........
BTW i wouldn't mind if u press that thanks button
abhishekr700 said:
phone's usb port is a hardware problem
you have to get it replaced at the service centre........
BTW i wouldn't mind if u press that thanks button
Click to expand...
Click to collapse
yeah, service center
haha thanks pressed dude
VillaVor said:
Okay, Here my problem since my phone got drown. After fixed it with my way (Internet yeah), everthing seems work except Usb. The problem are when connect it via usb to my pc (already installed samsung driver) in notif of my phone doesnt show usb connect or usb debugging but it just charging like normal. Tried to flash via odin buit device doesnt appear and yeah in my pc doesnt said its not recognized (Usb doesnt recognized or something like that). Hopefully it will be fixed without bring it to service center.
Thanks before...
Click to expand...
Click to collapse
the device might have trouble enumerating especially in windows 8.1
plug it in as normal
then plug any other usb dongle in like a wireless mouse thats already been installed
this will force windows into enumerating the device
if it doesnt work then most likely the port is damaged due the water damage it suffered
marcussmith2626 said:
the device might have trouble enumerating especially in windows 8.1
plug it in as normal
then plug any other usb dongle in like a wireless mouse thats already been installed
this will force windows into enumerating the device
if it doesnt work then most likely the port is damaged due the water damage it suffered
Click to expand...
Click to collapse
As you said i am in windows 8.1 right now, and already tried just a minute ago
that result is my pc always notif me "Usb device not recognized" hell yeah my pc still can read this is a device again :good:
As i said Usb device not recognized and then what should i do ?
Thanks for your experience :fingers-crossed:
VillaVor said:
As you said i am in windows 8.1 right now, and already tried just a minute ago
that result is my pc always notif me "Usb device not recognized" hell yeah my pc still can read this is a device again :good:
As i said Usb device not recognized and then what should i do ?
Thanks for your experience :fingers-crossed:
Click to expand...
Click to collapse
if it now shows in the device manager right click on it and update drivers
select the folder which has the samsung usb drivers or manually install them from the list
Ahh..... ah... ah.... Finally !! after plug it in my other pc (Windows xp) device working like normal again ....
Odin i'm coming !! Cant wait for clean install again
@marcussmith2626 Thanks ....
Really a 'Recognized Contributor' !!
Edit : Ok. trying as you said for this pc sir !!
VillaVor said:
Ahh..... ah... ah.... Finally !! after plug it in my other pc (Windows xp) device working like normal again ....
Odin i'm coming !! Cant wait for clean install again
@marcussmith2626 Thanks ....
Really a 'Recognized Contributor' !!
Edit : Ok. trying as you said for this pc sir !!
Click to expand...
Click to collapse
iv got windows 8.1 and had same problem
install the samsung usb drivers
put phone into download mode
push up to start connection and it should install drivers
the problem i had was mass storage and that was then solved by pluging the phone in (plug it in after the phone has booted) and then plugging in any other usb dongle
it then says in the status bar usb connected and you then you can select connect to pc and the pc will then install the drivers
marcussmith2626 said:
iv got windows 8.1 and had same problem
install the samsung usb drivers
put phone into download mode
push up to start connection and it should install drivers
the problem i had was mass storage and that was then solved by pluging the phone in (plug it in after the phone has booted) and then plugging in any other usb dongle
it then says in the status bar usb connected and you then you can select connect to pc and the pc will then install the drivers
Click to expand...
Click to collapse
Haha yeah just follow your instructions was surprises me for long time waiting.... one week exactly :silly::silly:
Coincidental that problem due from windows 8.1
Ok. Done edited post #1
VillaVor said:
Haha yeah just follow your instructions was surprises me for long time waiting.... one week exactly :silly::silly:
Coincidental that problem due from windows 8.1
Ok. Done edited post #1
Click to expand...
Click to collapse
it took me months to figure that one out - even microsoft and samsung hadnt got any ideas
its because windows 8.1 has changed the usb stack and requires that all drivers be digitally signed and has an identifer that the bios can read
this means some old usb device didnt work unless they met condition already although new drivers became available for most things but for some reason samsung havent updated their usb drivers in years (May 5, 2011 is last officall release) so im guessing thats why it doesnt fully work in windows 8.1 and im sure the problem is because its not properly signed so the device fails to enumerate unless you do the plugging in another usb device
other old phones work fine like htc and new samsung phones also work fine so its properly just a strange issue with the way the galaxy y handles usb
marcussmith2626 said:
it took me months to figure that one out - even microsoft and samsung hadnt got any ideas
its because windows 8.1 has changed the usb stack and requires that all drivers be digitally signed and has an identifer that the bios can read
this means some old usb device didnt work unless they met condition already although new drivers became available for most things but for some reason samsung havent updated their usb drivers in years (May 5, 2011 is last officall release) so im guessing thats why it doesnt fully work in windows 8.1 and im sure the problem is because its not properly signed so the device fails to enumerate unless you do the plugging in another usb device
other old phones work fine like htc and new samsung phones also work fine so its properly just a strange issue with the way the galaxy y handles usb
Click to expand...
Click to collapse
Classic problem came out again, my galaxy y still unrecognized.
Yes about 2 hours ago i tell you its succes but after that usb never recognized again.
VillaVor said:
Classic problem came out again, my galaxy y still unrecognized.
Yes about 2 hours ago i tell you its succes but after that usb never recognized again.
Click to expand...
Click to collapse
each time you have to repeat the process
unplug phone from computer
plug it back in
plug any other usb dongle in after
marcussmith2626 said:
each time you have to repeat the process
unplug phone from computer
plug it back in
plug any other usb dongle in after
Click to expand...
Click to collapse
Haha as fast as ....
If any other solution please tell me as quick as you know.
Okay, will try tomorrow ...
VillaVor said:
Haha as fast as ....
If any other solution please tell me as quick as you know.
Okay, will try tomorrow ...
Click to expand...
Click to collapse
unfortunatly thats the only solution iv found for windows 8.1 - if you restart the phone or remove the usb cable you have to go through the process again of unplugging cable plugging back in then plugging any other usb dongle in after - its the only way iv found for windows 8.1 to enumerate the device
marcussmith2626 said:
unfortunatly thats the only solution iv found for windows 8.1 - if you restart the phone or remove the usb cable you have to go through the process again of unplugging cable plugging back in then plugging any other usb dongle in after - its the only way iv found for windows 8.1 to enumerate the device
Click to expand...
Click to collapse
Still no luck, it always showed doesnt recognized, even other pc and laptop (Win8.1, Win8, WinXp). I think its hardware problem
VillaVor said:
Still no luck, it always showed doesnt recognized, even other pc and laptop (Win8.1, Win8, WinXp). I think its hardware problem
Click to expand...
Click to collapse
if its not detecting on xp then its damaged
marcussmith2626 said:
if its not detecting on xp then its damaged
Click to expand...
Click to collapse
Oh ya, first time follow your instruction its succes on windows xp, here is scenario (plug my sgy, plug other device which already installed, notif baloon appear as usb not recognized, plug out sgy, plug in on my other pc which installed os windows xp)
Hmm, seems hopeless for this matter
Will ask google for this classic problem or bring it service center.
Related
since around a week ago my phone has not been able to connect to the usb ,
it does still charge via usb cable from the pc but the cable is not detected for mass storage ,kies or usb debug .
i know drivers are ok on pc as my wifes phone still connects fine .
is there any way to test that the usb socket is broken internally
i am haing same prob here after flashing a rom
just backing phone up with clockwork mod then going to do a factory restore to see if it cures the problem ,dont think it will but i can but try . device doesnt even go into mtp ? mode .
even in clockwork recovery when the usb is mounted as mass storage it isnt detected
well tried that no success , cant send phone back as cant factory restore it as i cant connect to odin. by the way what rom are you running and what version of galaxy have you got 8gb or 16gb
jona29 said:
just backing phone up with clockwork mod then going to do a factory restore to see if it cures the problem ,dont think it will but i can but try . device doesnt even go into mtp ? mode .
even in clockwork recovery when the usb is mounted as mass storage it isnt detected
well tried that no success , cant send phone back as cant factory restore it as i cant connect to odin. by the way what rom are you running and what version of galaxy have you got 8gb or 16gb
Click to expand...
Click to collapse
Have you tried the debugging mode?
EDIT : Try installing the usb drivers from my signature.
ive tried debugging mode no different , i can even select - deselect usb debugging whist the usb cable is connected .
the usb drivers from your sig are for windows x64
my wifes galaxy s is detected by the computer fine ,same usb cable and port
jona29 said:
ive tried debugging mode no different , i can even select - deselect usb debugging whist the usb cable is connected .
the usb drivers from your sig are for windows x64
my wifes galaxy s is detected by the computer fine ,same usb cable and port
Click to expand...
Click to collapse
What OS are you running?
windows 7 32 bit
galaxy s 16gb with darkys v8 gingerbread (previously darkys version 6)
Can't you get hold of a friend's usb cable?
hi i have multiple usb cables here 2 original samsung galaxy cables plus multiple other micro usb cables . non of which work with the phone . not to sound ignorant but dont you think i have tried the obvious things first ?
Try a wipe/reset
If that doesnt work, try an other rom .... Stock or non-darkyy
If that doesnt work, im afraid there is a hardware problem
Sent from my GT-I9000 using XDA App
Cypher_X said:
Try a wipe/reset
If that doesnt work, try an other rom .... Stock or non-darkyy
If that doesnt work, im afraid there is a hardware problem
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
You are funny, their phone is OK, the CABLE doesn't work. Right?
jona29 said:
hi i have multiple usb cables here 2 original samsung galaxy cables plus multiple other micro usb cables . non of which work with the phone . not to sound ignorant but dont you think i have tried the obvious things first ?
Click to expand...
Click to collapse
DID you try to put a RIGHT cable into a WRONG hole???
You are not alone, I have exactly the same problem, but wrote it off as a hardware problem, because it started after my son (9 months and teething) gnawed on the phone for some time...
Sent from my GT-I9000 using Tapatalk
ok tried different roms etc no luck must be hardware related going to open the phone tomorrow and check the usb socket . only really worried incase i need to use odin to recover after a bad flash , or incase the usb decides to die completely and i cant charge the phone
jona29 said:
since around a week ago my phone has not been able to connect to the usb ,
it does still charge via usb cable from the pc but the cable is not detected for mass storage ,kies or usb debug .
i know drivers are ok on pc as my wifes phone still connects fine .
is there any way to test that the usb socket is broken internally
Click to expand...
Click to collapse
Hey Jona29 i had the same problem some time ago i solved it by changing usb port (preferably one direct to motherboard) while pc is off then start it while in download mode and flash with odin.
Good luck bud, i know how frustrating it is
UPDATE ! fixed the phone ,yes it was hardware not software at fault . dissasembled the phone and removed the board with the usb connector on .
heated the board around the connector with a pyro pen to reflow the solder
let it cooled and then reassembled the phone .
powered up phone and connected usb lead ,computer recognised phone and phone recognised usb connection
probably took me 30 mins to complete the task.
better than say a 4 week wait from samsung
jona29 said:
heated the board around the connector with a pyro pen to reflow the solder
Click to expand...
Click to collapse
Slick. I have taken my phone apart for USB problems as well, but I would be scared to try to reflow something on the PBC. The connections are so small.
I have had the USB issue as well but it always seemed to be the cooked ROM iI was using.
Ian
I had the same problem, after using DXJPA ... every time i connected the phone (even in boot mode) i received "USB device not recognized" ... I don't know what worked in the end, but i tried a lot of things: I bought a new cable (same problem), I used another computer (same problem), I tried on W7 x64, W7 x32, XP SP3 (same problem), uninstalled and reinstalled Kies, I uninstalled and reinstalled an older version of Kies, changed the phone form a computer to another, played a lot with USB ports ...
After 2-3 hours of pain, Odin saw the phone ... flash it to JPY and no USB problem anymore ...
Maybe this will help someone
mik3y007 said:
I had the same problem, after using DXJPA ... every time i connected the phone (even in boot mode) i received "USB device not recognized" ... I don't know what worked in the end, but i tried a lot of things: I bought a new cable (same problem), I used another computer (same problem), I tried on W7 x64, W7 x32, XP SP3 (same problem), uninstalled and reinstalled Kies, I uninstalled and reinstalled an older version of Kies, changed the phone form a computer to another, played a lot with USB ports ...
After 2-3 hours of pain, Odin saw the phone ... flash it to JPY and no USB problem anymore ...
Maybe this will help someone
Click to expand...
Click to collapse
have the same problem..
tried everything.. i dont dare to reflow my phone..
Hi
I Have Samsung Galaxy S.
I Have Installed Paranoid Custom ROM On My Device Now I Need To Flush The Original ROM
But I have Problem : When i connect my phone to pc the phone doesn't show any thing any connection massage and even if i enter the phone in downloading mode the pc and the phone doesn't show show any thing
Please I Need help i can't flash any stock rom please help:crying::crying::crying::crying:
Hi Syrian Eagle,
You should
Boot into "Download Mode"
start odin / heimdall
connect with computer via USB
load Stock firmware files
click on "Flash"- / "Start" - Button (I can't remember how is called)
http://forum.xda-developers.com/showthread.php?t=1637966
You could use this tutorial..you'll find package with Samsung drivers etc..make sure you have uninstalled old drivers & rebooted before installing new ones.
Also make sure you have working USB cable etc.
Sent from my GT-I9000 using Tapatalk 2
I forgot to post links
Here will you find Stock Firmwares
http://cur.lv/2j5o
Flash Guide
http://cur.lv/2j5p
Drivers
http://cur.lv/2j5q
Flashprograms
http://cur.lv/2j5r
Service Manuals
http://cur.lv/2j5s
diklooc said:
Hi Syrian Eagle,
You should
Boot into "Download Mode"
start odin / heimdall
connect with computer via USB
load Stock firmware files
click on "Flash"- / "Start" - Button (I can't remember how is called)
Click to expand...
Click to collapse
Thanks for your help but my problem is when i connect my phone in download mode or regular mode the pc doesn't see my phone and my phone doesn't say any thing (like if he is not connected) i think not a driver issue because previously i connect the phone into ODIN but now after flushing the paranoid ROM this problem appear .
Kurre said:
http://forum.xda-developers.com/showthread.php?t=1637966
You could use this tutorial..you'll find package with Samsung drivers etc..make sure you have uninstalled old drivers & rebooted before installing new ones.
Also make sure you have working USB cable etc.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
The problem is when i connect my phone to pc the phone doesn't show any thing and the pc doesn't show any thing too .
when i connect my hone appears like if he is not connected.
Syrian Eagle said:
The problem is when i connect my phone to pc the phone doesn't show any thing and the pc doesn't show any thing too .
when i connect my hone appears like if he is not connected.
Click to expand...
Click to collapse
Your USB cable must be damaged or your USB port may need cleaning or damaged try these solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Syrian Eagle said:
Thanks for your help but my problem is when i connect my phone in download mode or regular mode the pc doesn't see my phone and my phone doesn't say any thing (like if he is not connected) i think not a driver issue because previously i connect the phone into ODIN but now after flushing the paranoid ROM this problem appear .
Click to expand...
Click to collapse
If you have come from a GingerBread ROM that would be correct.
ICS/JB ROMS USE DIFFERENT DRIVERS
Now follow the advise and reinstall the samsung drivers and try again.
Lexrsk said:
If you have come from a GingerBread ROM that would be correct.
ICS/JB ROMS USE DIFFERENT DRIVERS
Now follow the advise and reinstall the samsung drivers and try again.
Click to expand...
Click to collapse
Ok How Can I Install the ICS/JB Drivers into my phone :crying::crying::crying::crying:
xsenman said:
Your USB cable must be damaged or your USB port may need cleaning or damaged try these solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Click to expand...
Click to collapse
Thank you very much but my problem is not resolved because when i connect my phone into the pc my phone and the pc doesn't show any thing like if he is not connected
Turn off the phone, remove battery, wait 1 minute, put the battery back and restart the phone. Then connect the phone to your pc and see if that helped.
Sent from my GT-I9000 using Tapatalk 2
Syrian Eagle said:
Thank you very much but my problem is not resolved because when i connect my phone into the pc my phone and the pc doesn't show any thing like if he is not connected
Click to expand...
Click to collapse
Every possible reason and solutions that I am aware of, for them are mentioned on that link , you have to try and test each one out, including various Drivers, for you to test...
BUT you keep saying there was no Sign of connection, which means the PC does not say anything (like unknown USB Device) or make a sound and your USB icon does not appear on the phone...am I correct???
That simply means there is NO link, which means, its either your USB cable or USB Port is damaged
alexovy said:
Turn off the phone, remove battery, wait 1 minute, put the battery back and restart the phone. Then connect the phone to your pc and see if that helped.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
Sorry nothing get petter still the problem
I tried a ROM, and i fail, i can't turn on my phone (s5360), i must back my phone to STOCK ROM with Odin, but USB Device Not Recognized, i installed driver, help me
follow the instructions on my thread
http://forum.xda-developers.com/showthread.php?t=2568853
if you have installed the driver correctly using rear usb ports if on a pc and set your phone to download mode correctly there is no reason why odin will not display com then a number in a coloured box under com:id which shows odin is connected and you have android adb device displayed in device manager
thanks your help but it not work
thanks your help but it not work, :crying: i tried kies, it also not work
gemnett said:
thanks your help but it not work, :crying: i tried kies, it also not work
Click to expand...
Click to collapse
you can not use kies to flash or restore firmware on galaxy y - it is not supported and kies is just not needed
if you have installed the usb drivers from the link in my thread (in compatibility mode if on windows 8/8.1) - are using a working usb cable rear usb ports on pc and correct split firmware from my thread it will work
unless you have a faulty usb port/cable it will be due to user error
gemnett said:
thanks your help but it not work, :crying: i tried kies, it also not work
Click to expand...
Click to collapse
Are you boot into download mode already? If not , odin will not recognize your phone anyway
install samsung usb driver first n then connect your phone with download mode by usb
Note:make sure that usb driver is install properly before connect ur phone
.
marcussmith2626 said:
you can not use kies to flash or restore firmware on galaxy y - it is not supported and kies is just not needed
if you have installed the usb drivers from the link in my thread (in compatibility mode if on windows 8/8.1) - are using a working usb cable rear usb ports on pc and correct split firmware from my thread it will work
unless you have a faulty usb port/cable it will be due to user error
Click to expand...
Click to collapse
i did it.. install the usb drivers from the link in your thread(win 8.1), put cable in rear sub port.. but still no working.... i give up
!!
GalKill said:
Are you boot into download mode already? If not , odin will not recognize your phone anyway
Click to expand...
Click to collapse
of course
@@
before that, i installed ROM cm7.2 with Kernel [email protected]#2. but it fail and can't boot. recovery also no
gemnett said:
i did it.. install the usb drivers from the link in your thread(win 8.1), put cable in rear sub port.. but still no working.... i give up
Click to expand...
Click to collapse
did you run the usb driver setup in compatibility mode?
right click the setup file
click properties
click compatibility tab
tick box to run in compatibility
select windows xp (service pack 2 will do)
apply
then run the setup
im using windows 8.1 and no problems with me
marcussmith2626 said:
did you run the usb driver setup in compatibility mode?
right click the setup file
click properties
click compatibility tab
tick box to run in compatibility
select windows xp (service pack 2 will do)
apply
then run the setup
im using windows 8.1 and no problems with me
Click to expand...
Click to collapse
i did, pack 2..but still USB Device Not Recognized, maybe my phone die. hehe. but thank you....
Ah, this is my problem: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)" :cyclops:
gemnett said:
i did, pack 2..but still USB Device Not Recognized, maybe my phone die. hehe. but thank you....
Ah, this is my problem: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)" :cyclops:
Click to expand...
Click to collapse
right click the device
click uninstall
restart the pc
then put phone into download mode
connect usb
push vol up on phone to start connection
drivers should then install
Try to use your cable connected from your pc and your phone again. If the same problem happened, try to connect your phone using that cable to another pc. BUT if that phone is not recognized, I think the problem is in the cable. Try to buy another one, and if same thing happened, the problem is in the usb port of your phone.
DiwatangTboom said:
Try to use your cable connected from your pc and your phone again. If the same problem happened, try to connect your phone using that cable to another pc. BUT if that phone is not recognized, I think the problem is in the cable. Try to buy another one, and if same thing happened, the problem is in the usb port of your phone.
Click to expand...
Click to collapse
I think so.. the problem is in the usb port of my phone... so, what i have to do ? replace?
gemnett said:
I think so.. the problem is in the usb port of my phone... so, what i have to do ? replace?
Click to expand...
Click to collapse
Yep.
Trying to use odin to flash the stock rom but I cannot connect to pc. I have the correct drivers and usb cable and have tried 2 different pc's that have worked in the past. Running cyanogenmod 11. Any help is appreciated.
Thanks
Perhaps bad cable, or try different usb port.
guyrelax said:
Trying to use odin to flash the stock rom but I cannot connect to pc. I have the correct drivers and usb cable and have tried 2 different pc's that have worked in the past. Running cyanogenmod 11. Any help is appreciated.
Thanks
Click to expand...
Click to collapse
Does it recognize the phone at all when it's connected? Does the phone recognize it's being charged? Are you on Windows 7?
ran into the same problem. any thoughts?
matraca said:
Perhaps bad cable, or try different usb port.
Click to expand...
Click to collapse
as i mentioned i have tried different cables and pc's. I'm running windows 7 and drivers are installed.
TheZander said:
Does it recognize the phone at all when it's connected? Does the phone recognize it's being charged? Are you on Windows 7?
Click to expand...
Click to collapse
yes it charges. doesn't recognize the phone
guyrelax said:
yes it charges. doesn't recognize the phone
Click to expand...
Click to collapse
Do the ##3284# Menu an see if MTP and ADB is checked.
If that doesn't work find a USB Storage app from the play store and that forces it in that mode. If that still doesn't work then you need to gather up all your Micro USB cords and try every one. Or use the one that came in the box
I had that same problem before, I fixed it by uninstalling drivers and installing again. Maybe flash another rom and see if that works. I know if you have usb fast charging enabled enabled on ktkernel that will prevent your computer from recognizing phone. Good luck
matraca said:
I had that same problem before, I fixed it by uninstalling drivers and installing again. Maybe flash another rom and see if that works. I know if you have usb fast charging enabled enabled on ktkernel that will prevent your computer from recognizing phone. Good luck
Click to expand...
Click to collapse
Not sure why but I hooked it up last night and it magically worked using the same pc, port, and cord I was trying before. Finally got rid of cyanogenmod. Thanks for the help
Every time I connect my phone to pc it doesn't recognise it and says it malfunctioned plz help me
[email protected] said:
Every time I connect my phone to pc it doesn't recognise it and says it malfunctioned plz help me
Click to expand...
Click to collapse
Try to download & install samsung mobile usb driver, then restart ur pc, try again to connect ur phone.
Thank you
noman6999 said:
Try to download & install samsung mobile usb driver, then restart ur pc, try again to connect ur phone.
Thank you
Click to expand...
Click to collapse
No it doesn't work help mee
i have the same problem downloaded the driver and kies and smart switch nothing works , I even bought a new usb cable but just the same , when I plug the phone in it starts to charge but the pc won`t recognise it to transfere photo`s or videos I have windows 10
Uninstall the current driver in device manager and reinstall the latest driver
just done it still won`t recognise phone , my phone is model SM-G361F
Try a different USB port, a different Cable if neither would fix it try connecting to a different PC..
i have tried all 8 usb plugs and bought a new usb cable just the same thinking of changing my pc lol
nigmck said:
i have tried all 8 usb plugs and bought a new usb cable just the same thinking of changing my pc lol
Click to expand...
Click to collapse
Sometimes not properly installed Windows 10 gives the same **** so try another PC too
that could b the problem I upgraded to windows 10 thru a free upgrade from windows , never liked it lol , have to go and c if I can check it now tks