Hey Guys,
I'm having trouble with my A953 Milestone 2.
I installed that awesome JB rom and I am now trying to get back to stock.
For some reason my milestone shows up as a UNKNOWN DEVICE via USB. I can't seem to charge it when plugged into a wall charger.
When booted into jellybean it SAYS its charging, but isn't
When I connect the Milestone 2 to my computer and run RSD Lite to flash a new rom I can't seem to get my PC to recognize the device correctly.
Any ideas?
Thanks very much for your help guys.
Bad USB cable?
thiagomtl said:
Bad USB cable?
Click to expand...
Click to collapse
I've tried several different computers and usb cables and operating system.
Its not the cable.
I once have a similar issure. The PC dont recognize my MS2 with CM9. I fixed it with following steps.
1. Install Moto driver in PC
2. Install RSD lite
3. Resart the phone into AP Fastboot mode.
4. Flash stock ROM
5. Root it and flash custon ROM
Related
hello i have opad p10 oem version of advent vega after some market application install first my desktop window gone then i tried to restart in recovery mode but tablet is no screen cant inter in cwm only white circle with andriod robot with in upear micro second and gone pleas help i cant connect with my pc because usb problem any method to boot or flash with sdcard i have some knowledg about linux and lablet install 3.2 9n1 thanks sorry for my bad english
As far as i am aware the only way out is to reflash the stock firmware, without usb your a bit stuck. what is the problem with the usb connection?
i am trying 3 systems xp w7-64 w7-32 all are device not recognized error in device maneger is yellow mark unknown device
You need to install the usb recovery drivers. They are on the advent/pov websites. I assume there the same as your tab.
i cant access my tablet because i have usb not recognized error i want any alternat method to flash my tablet rom like sd card or usb drive thanks
no one solved my problem any idea if i use usb to serial cable or usb to lpt cable
You need to sort the usb driver issue. That will solve your problem. As far as i am aware flashing the stock rom with any other cable is not possible.
finaly i found a pc i install a nvidia driver audi sign green but run moddedstock its showing error nvflash uid read failed what this error and some time nvflash runing but blank screen nothing hapen
every time connect to pc masseg appear this device perform faster but connect to usb 1.1 and every time flash hang betwen system.img copying last file why is connect slow speed not full usb 2 speed there is cable problem or some thing else or driver problem ihave tried vega flash and modded stock v2 any help to try with linux ubuntu pleas help me thanks
any help to flash only system.img or only flash cwm to boot into cwm and then install modded rom in to opad
Can you boot in recovery mode?
SGS2-i9100; SGS3-i9300; Archos 101 Turbo (G9/250gb/512mb)
Hi guys
I recently bought a defy plus (bl7) , rooted it and installed ms2ginger. Since yesterday it's USB is not working for data transfer or anything except for charging, the device wont charge even using the data cable, however it charges through a charger. I want to get it repaired since it's under warranty, but with custom ROM i can't. I have a stock sbf file with me, but it can't be flashed with no working USB. Is there any way to flash custom sbf through the recovery..?
things i have tried :
Used different USB cables
Tried on ubuntu, arch linux, windows xp, windows 7
Try this: http://forum.xda-developers.com/showpost.php?p=31062260&postcount=2
Does it charge on the usal power supply? If yes, get CM7 zip on your sd-card and flash it in cwm!
panhans said:
Try this: http://forum.xda-developers.com/showpost.php?p=31062260&postcount=2
Does it charge on the usal power supply? If yes, get CM7 zip on your sd-card and flash it in cwm!
Click to expand...
Click to collapse
well, it does charge, but it doesnot really detect a USB cable connected to computer, it just gets the screenlight on, thats it. there is no option to choose which mode i want to connect it as... it charges only from the charger, and for USB connected to computer, it wont even charge, just gets the screen light on.
Even if i boot from recovery and mount my sdcard, it still doesnt shows up on computer.
Update : RSDLite detects it, flashed my stock sbf over it, i hope if i get a warranty.. but weird thing is.. if RSDLite works.. why not usb works on PC.. i tried this with linux and windows both, in linux it doesnt even populate this device in /dev node.. this is really weird, even stock firmware doesnt detect USB, doesnt even charges from it.. just gets the backlight on.. rest it charges through the charger. totally confused..
avinash.verma.hbk said:
Update : RSDLite detects it, flashed my stock sbf over it, i hope if i get a warranty.. but weird thing is.. if RSDLite works.. why not usb works on PC.. i tried this with linux and windows both, in linux it doesnt even populate this device in /dev node.. this is really weird, even stock firmware doesnt detect USB, doesnt even charges from it.. just gets the backlight on.. rest it charges through the charger. totally confused..
Click to expand...
Click to collapse
Another update, lsusb on linux lists the device, RSDLite always detects it..and it does let me flash perfectly.. on phone it occasionally detects USB... whenever it does not, if i toggle ADB option in settings, it shows that USB is connected in status bar, however setting value there has no change, but SOMETIMES it does detect the USB.. i dont think its a hardware fault, if it was it wouldnt be detected by RSDLite...
i have tried changing the rom too, tried ms2ginger, stock, and Cyanogenmod 9 and 10.. all give the same issue.. only one advantage i get in Cyanogenmod is that it charges over USB, that's it.. it detects it as a charger...
In recovery menu as well i cant mount it.. Please Help.. anyone? :crying:
By the way this issue is similar to this one :
but the solution doesnt work for me as i dont get phoneutils with that combo
blog.vacs.fr/index.php?post/2010/12/24/How-to-repair-the-USB-not-detected-problem-on-Android-Samsung-phones
Please ask all questions in the Q&A section. Thread moved there.
Hello folks,
Ive written beforehand in here asking for a little issue I had with my milestone 2 (Assuming a dead usb port and a bootloop)
anyway I got replaced the USB connector, but My phone wont show up on RSD lite... No matter what version I use (tried everything from 4.9 to the latest, nor the drivers.) Im on win 7 ultimate x64, but tried on ubuntu, win xp and win 7x32 having no success.
The phone WONT charge over usb, even with it's usb port replaced.
Teh phone will enter stock recovery, and bootloader mode ( it´s on 07.12)
The phone will also recognize it is "connected" on bootloader (It reads USB Connected OK to program), but the PC wont recognize it.
any suggestions???
may I have to flash it with a "box"??
donlloreda said:
Hello folks,
Ive written beforehand in here asking for a little issue I had with my milestone 2 (Assuming a dead usb port and a bootloop)
anyway I got replaced the USB connector, but My phone wont show up on RSD lite... No matter what version I use (tried everything from 4.9 to the latest, nor the drivers.) Im on win 7 ultimate x64, but tried on ubuntu, win xp and win 7x32 having no success.
The phone WONT charge over usb, even with it's usb port replaced.
Teh phone will enter stock recovery, and bootloader mode ( it´s on 07.12)
The phone will also recognize it is "connected" on bootloader (It reads USB Connected OK to program), but the PC wont recognize it.
any suggestions???
may I have to flash it with a "box"??
Click to expand...
Click to collapse
Either your USB port got replaced badly, or you don't have the drivers: http://www.motorola.com/staticfiles/Support/Experiences/Global_Drivers/USB_Drivers_bit_4.7.1.zip
Try a different cable, diferent port, different computer...
I'm running Eclipse ROM RC5.2 (JB 4.2.2).
I tried connecting my phone via USB to PC (not FASTBOOT AP, just regular) and I'm getting "Device not recognized". Do I have to download a different USB driver to work with my phone so I can transfer files?
jsbenson said:
I'm running Eclipse ROM RC5.2 (JB 4.2.2).
I tried connecting my phone via USB to PC (not FASTBOOT AP, just regular) and I'm getting "Device not recognized". Do I have to download a different USB driver to work with my phone so I can transfer files?
Click to expand...
Click to collapse
Try do flash this kernel 06/29 & actevate USB debugging - it`ll fix USB connect
St.Noigel said:
Try do flash this kernel 06/29 & actevate USB debugging - it`ll fix USB connect
Click to expand...
Click to collapse
Installed from TWRP but nit successful. Hangs at the boot logo. Restored my backup.
Any suggestions?
jsbenson said:
I'm running Eclipse ROM RC5.2 (JB 4.2.2).
I tried connecting my phone via USB to PC (not FASTBOOT AP, just regular) and I'm getting "Device not recognized". Do I have to download a different USB driver to work with my phone so I can transfer files?
Click to expand...
Click to collapse
Dumb question, have you tried other USB ports? For some reason, only 1 port on my laptop likes to play nice with my Razr M.
Also, do you have the default Moto drivers installed? If not, they are included in Matt's 1.20 utility download.
Coronado is dead said:
Dumb question, have you tried other USB ports? For some reason, only 1 port on my laptop likes to play nice with my Razr M.
Also, do you have the default Moto drivers installed? If not, they are included in Matt's 1.20 utility download.
Click to expand...
Click to collapse
I did try a few ports (had the same experience as well). I may have uninstalled the moto drivers while trying to fix. I'll try the driver download.
However, the zip caused the phone to hang so I don't know what's up with that. I was connecting fine before CM10.1. Is that common when flashing ROMs?
jsbenson said:
Installed from TWRP but nit successful. Hangs at the boot logo. Restored my backup.
Any suggestions?
Click to expand...
Click to collapse
What date of Eclipse build? Lastest CM10.1, AOKP, Carbon, AXIOM, JellyBeer & PACMAN have not this problem...
St.Noigel said:
What date of Eclipse build? Lastest CM10.1, AOKP, Carbon, AXIOM, JellyBeer & PACMAN have not this problem...
Click to expand...
Click to collapse
Still no luck
I am running Eclipse 5.0-build-2 (build date 6/15/2013)
I have a nexus 7 as well and I ran into conflicts between the two drivers so I've had to switch back and forth with setups. However, after flashing eclipse the drivers no longer worked. I have tried wiping out all the USB vendors and drivers and setting the razr drivers back up again but no luck.
I'm going to try and use the drivers from matt's utility.
Trying connecting the phone via USB and restarting it. This method has been working with other 4.2.2 Roms
PantherVT said:
Trying connecting the phone via USB and restarting it. This method has been working with other 4.2.2 Roms
Click to expand...
Click to collapse
Restarting the phone or the PC?
jsbenson said:
Restarting the phone or the PC?
Click to expand...
Click to collapse
Reboot the phone while connected via USB
Hi guys,
i have currently problem with my LG G2 D802 32GB.
Description:
- Android CM11 works (installed via TWRP)
- TWRP 2.6.3.3 works
- But now i am trying to flash stock firmware via downlaod mode (volume up then plug in usb cable). But there is some problem with download mode. Last what i can see is this screen: i1.ytimg.com/vi/kcFtnZZ7I1U/hqdefault.jpg
My PC don't recognize USB device i think (no USB sound in Windows, no new device in Device manager). Something is wrong. I tried to install USB drivers from tutorials to my PC (Win 8.1 64b or Win 7 64b), but no change. And cable is ok (have two USB cables). Maybe i have wrong drivers?
Could you advise me please?
Thank you in advance... I'm desperate
mel0un said:
Hi guys,
i have currently problem with my LG G2 D802 32GB.
Description:
- Android CM11 works (installed via TWRP)
- TWRP 2.6.3.3 works
- But now i am trying to flash stock firmware via downlaod mode (volume up then plug in usb cable). But there is some problem with download mode. Last what i can see is this screen: i1.ytimg.com/vi/kcFtnZZ7I1U/hqdefault.jpg
My PC don't recognize USB device i think (no USB sound in Windows, no new device in Device manager). Something is wrong. I tried to install USB drivers from tutorials to my PC (Win 8.1 64b or Win 7 64b), but no change. And cable is ok (have two USB cables). Maybe i have wrong drivers?
Could you advise me please?
Thank you in advance... I'm desperate
Click to expand...
Click to collapse
Try plugging your phone to the back USB Ports on your computer.
sometimes does front ports are not capeble for diffrent actions.
Harellevy said:
Try plugging your phone to the back USB Ports on your computer.
sometimes does front ports are not capeble for diffrent actions.
Click to expand...
Click to collapse
I have only 2 notebooks. I tried several ports (usb 2.0 or 3.0) and nothing.
I think there is problem with some partititon in my G2. But what partition i should flash to repair my phone?
My accelerometer and compass doesn't work too in CM 10.2 stable. Maybe it has a connection...