Database Users

U8800 Dead !

Hi .. Yesterday i've bought a u8800 ... I installed 2.3.5 update and rooted it and installed cwm then aura ics And it worked fine .. I tried to reboo t into recovery but the phone stoped working ! i tried to connect it with Usb caple and the charger but Its dead ! Doesnt Recognize even on pc ! any help ?!

What is the complete model of the phone? I'm guessing that you installed Gingerbread intended for a U8800Pro onto a U8800-51. Will the phone boot to a purple screen (both volume buttons + switch)?

No the mob was working Very good ! But I Powered it of Then Its Combustibility Dead

Taki2011 said:
No the mob was working Very good ! But I Powered it of Then Its Combustibility Dead
Click to expand...
Click to collapse
Have you tried removing the battery and connecting the phone to a charger (without the battery) and see if anything happens? Or maybe you ran out of battery and your charger is defected? :cyclops:

Well, it happen to me also two weeks ago.If you want to know if bricked or no you can connect it with the charger via usb. (No to pc)). If start charging you it's not bricked, otherwise(... ).
-To be absolutely sure you can try connect it to pc running Linux. If os recognize the mobile HD partition you can do many things.
-At last you can use jit usb. If you don't now what's jit forget it. Look for warranty.
Sent from my U8800Pro using xda app-developers app

gyankamp1 said:
Well, it happen to me also two weeks ago.If you want to know if bricked or no you can connect it with the charger via usb. (No to pc)). If start charging you it's not bricked, otherwise(... ).
-To be absolutely sure you can try connect it to pc running Linux. If os recognize the mobile HD partition you can do many things.
-At last you can use jit usb. If you don't now what's jit forget it. Look for warranty.
Sent from my U8800Pro using xda app-developers app
Click to expand...
Click to collapse
its not recognized !

Taki2011 said:
its not recognized !
Click to expand...
Click to collapse
Try connecting USB cable from PC to your phone with out battery....

[Q] USB device not recognized

I have my galaxy y flashed with JellyBlast4.1 and also merruk kernel 2.5 then reinstalled stock roms because there are so many processes that appears to force stop..
after so many times I reflashed stock rom, jellyblast and merruk the phone cannot go to CWM properly...them CWM menu sometimes appear then mostly its just merruk image with the ClockworkMod Recovery v5.0.2.6 text....
I can still connect to ODIN mode but several PC cant recognize my device...it says USB device not recognized. I installed Kies old version and new version...I also tried using only samsung usb drivers not the kies packages..but still PC saya usb device not recognized...
what can I still do... I'm not able to use my phone for 3 days already...
I tried to connect and disconnect my galaxy y and connect again but I get the same response from the PC....
I also tried to do the reflashing stock rom process via ODIN on other PC's on several computer shops here in my area in Philippines but still cannot reflash stock rom via ODIN because my device cant be recognized...
I have gone to conclusion that some or a specific component of my phone is damaged already...
should I go to service center already???please I still wanna fix this problem on my own with your supports....I dont wanna spend money on service center yet... also I dont have money...im still a student....huhuhuh

Try to flash stock rom via odin on windows vista os pc or windows7 home basic os
I also faced dis prob on my windows7 ultimate os but on windows vista everytime my galaxy y get recognized
Sent from my GT-S5360 using xda premium

Check your cable (You must use factory one)
USB port : use the main
can you post SS

Try flashing a different merruk kernel and see whether the pc detects your device.
Don't do it many times as there can be chances of hard brick.

usb notb detected
miloboy05 said:
I have my galaxy y flashed with JellyBlast4.1 and also merruk kernel 2.5 then reinstalled stock roms because there are so many processes that appears to force stop..
after so many times I reflashed stock rom, jellyblast and merruk the phone cannot go to CWM properly...them CWM menu sometimes appear then mostly its just merruk image with the ClockworkMod Recovery v5.0.2.6 text....
I can still connect to ODIN mode but several PC cant recognize my device...it says USB device not recognized. I installed Kies old version and new version...I also tried using only samsung usb drivers not the kies packages..but still PC saya usb device not recognized...
what can I still do... I'm not able to use my phone for 3 days already...
I tried to connect and disconnect my galaxy y and connect again but I get the same response from the PC....
I also tried to do the reflashing stock rom process via ODIN on other PC's on several computer shops here in my area in Philippines but still cannot reflash stock rom via ODIN because my device cant be recognized...
I have gone to conclusion that some or a specific component of my phone is damaged already...
should I go to service center already???please I still wanna fix this problem on my own with your supports....I dont wanna spend money on service center yet... also I dont have money...im still a student....huhuhuh
Click to expand...
Click to collapse
Dude install samsung kies don't update try to wait give it like 5 minutes it works for me using windows 7 ultimate

its now getting detected but git stucked on setup connection on odin 1.85,,,id:com on odin has already turned yellow below with 0:[COM5]

thanks for all you that respond to mt post :good:

thankx
Mohamed.Anwar said:
Check your cable (You must use factory one)
USB port : use the main
can you post SS
Click to expand...
Click to collapse
That is very helpful n you save my phone, thankx bro

my phone samsung galaxy y GT 5360 was working just fine...then today i got an update then i downloaded it..n started installing update but it stucked at 88% for long time so i switched it off during installing..n then it is stuck on the start up logo n nothing happens futhur..n whn i connect to it to computer for odin it says unknow device unable to install drivers...pls help i followed all threads !! bt could not found any useful info ~

flash stock rom using odin

Reynaldi said:
flash stock rom using odin
Click to expand...
Click to collapse
I am facing a similar issue. Is there a solution yet ?
My Galaxy Y shows up the Welcome LOGO and goes OFF in say about 10 seconds.
I tried going into recovery mode/ download mode , but the operation lasts for only 10 seconds approximately.
Trying to connect the Phone to my PC fails with some "Unable to connect via USB" kind of a warning.
Any help is highly appreciated.

Hello!
kshashank said:
my phone samsung galaxy y GT 5360 was working just fine...then today i got an update then i downloaded it..n started installing update but it stucked at 88% for long time so i switched it off during installing..n then it is stuck on the start up logo n nothing happens futhur..n whn i connect to it to computer for odin it says unknow device unable to install drivers...pls help i followed all threads !! bt could not found any useful info ~
Click to expand...
Click to collapse
Use linux OS( in computer ) because no drivers are needed there.... :good:
BUT....
I dont know whether ODIN is available for LINUX OS...
Anyway try searching... :good:

walley0 said:
I am facing a similar issue. Is there a solution yet ?
My Galaxy Y shows up the Welcome LOGO and goes OFF in say about 10 seconds.
I tried going into recovery mode/ download mode , but the operation lasts for only 10 seconds approximately.
Trying to connect the Phone to my PC fails with some "Unable to connect via USB" kind of a warning.
Any help is highly appreciated.
Click to expand...
Click to collapse
try connecting without battery
and go into download mode

lvabarajithan said:
Use linux OS( in computer ) because no drivers are needed there.... :good:
Click to expand...
Click to collapse
Will give this a TRY. Nice clicked though
---------- Post added at 11:52 AM ---------- Previous post was at 11:36 AM ----------
sangalaxy said:
try connecting without battery
and go into download mode
Click to expand...
Click to collapse
Are you serious ? Connect it without the battery ?
Weird aah

walley0 said:
Are you serious ? Connect it without the battery ?
Weird aah
Click to expand...
Click to collapse
A usb cable carries power so you can enter download mode without the battery

marcussmith2626 said:
A usb cable carries power so you can enter download mode without the battery
Click to expand...
Click to collapse
"USB Device not recognised"
No luck.

walley0 said:
"USB Device not recognised"
No luck.
Click to expand...
Click to collapse
Make sure keis is not installed (conflicts with odin) and install Samsung drivers
Or try a different pc or Google what to do when phone not recognised - the answers are there

install samsung drivers
noo need of kies
switch off the phone
and then connect ur data cable to ur pc qnd then pressing the
volume down+home key+powerkey u will
enter into download mode ..
then ur phone will be detected by the pc..
Sent from my GT-S5360 using xda app-developers app

Use Odin/download samsung mobile usb driver.exe and restart your comp.
-Your Region Pack Select.
-Flash

Are you serious ? Connect it without the battery ?
Weird aah
Click to expand...
Click to collapse
Surely it will work... :fingers-crossed: :fingers-crossed: :fingers-crossed:

Help usb not recognized defy :(

hey there :good:
can u help me with that please ?
downloaded the drivers for motorola and still the pc not recognized it :crying:
what can i do ? tnx for all the help :highfive:
p.s all the usb in my computer is ok - test it with all usb devices !
the motorola defy runing 2.1

1.jast format the sd card - fail to recognized it
2. replace sd card - fail to recognized it
please help me
tnx.

& installed motorola rsd lite & motorola divice manager - fail to recognized it ...
please i need your help.

in the divice mamnager in windows 7 i cant see a yello triangle on any off the usb [email protected]#?!
but still the pc cant recognized the mobile motorola defy phone !
what can i do ?

If you rejoin yourself and try to be more accurate with your's problem description somebody will help.
First: what do you wanna do?
Second: power off your phone. Power on with Vol+ pressed. Boot menu will appear. Connect the usb cable to PC and after to phone. In what way pc reacted?

pgreed said:
If you rejoin yourself and try to be more accurate with your's problem description somebody will help.
First: what do you wanna do?
Second: power off your phone. Power on with Vol+ pressed. Boot menu will appear. Connect the usb cable to PC and after to phone. In what way pc reacted?
Click to expand...
Click to collapse
1.OK - need to flash to jelly ...
2. did what u say ... -> im geting a black screen bootloader 09.10
battery ok
ok to program transfer mode:
ok
thats it the pc dont - dont do anything ...

what can i do from here mate ?
i truly appreciate your help !

im despaired
please help

tuneon said:
im despaired
please help
Click to expand...
Click to collapse
XP is more suitable for flashing. I am also faced troubles with win7
Sent from my MB525 using Tapatalk 2

tuneon said:
1.OK - need to flash to jelly ...
2. did what u say ... -> im geting a black screen bootloader 09.10
battery ok
ok to program transfer mode:
ok
thats it the pc dont - dont do anything ...
Click to expand...
Click to collapse
From this position if you connect the Defy to PC through usb cable you will see a message on the pc saying that it search the drivers. After pc find and install drivers (or you install drivers from forum) start RSD and do the flsh. If you see nothing most probable that usb cable is defective.

Fail - please help me

tuneon said:
Fail - please help me
Click to expand...
Click to collapse
Dude, I'm having this problem, too...
A friend gave me his Defy to let me repair it - it has the LED Bug (or what its called), so it does nothing. Just giving a white LED, when it has been connected with USB Port... I tried so mich different drivers, USB-Ports and USB-Cables... All Modes that I found I tried and so on, but no chance...
Now I hope to get a important information in this forum...
...sent with my LG Optimus 4X HD...

tuneon said:
Fail - please help me
Click to expand...
Click to collapse
Did you try with another USB cable?

first step
1
Does the phone charge?
charge the battery
2
hold vol+ button, vith the other hand hold power
3
Now you can drop phone on table,
what u see
¿triangle with ! ?
¿white text?
ok, this is the bootloader
4
power off.
SOFTWARE
rds lite, version and drivers ok? sure?
uninstall all(motorola, drivers, rds, all), reboot pc, reinstall
restart after installing each program
(THIS is only to have a clean instalation with appropiate aplications and drivers)
run rds lite and conect phone(with original motorola usb)
(time ago have problems with galaxy ace usb)
*

ok did it + hard reset to the defy + format to the sd card

kienlodiria said:
1
3
Now you can drop phone on table,
what u see
¿triangle with ! ?
¿white text?
ok, this is the bootloader
*
Click to expand...
Click to collapse
??? What method is that?

foramt my laptop to try to get connect 2 the defy - but stiil - fail
help please

tuneon said:
foramt my laptop to try to get connect 2 the defy - but stiil - fail
help please
Click to expand...
Click to collapse
I didn't say to format the pc but to try another usb cable because sometime is a data cable problem.

pgreed said:
I didn't say to format the pc but to try another usb cable because sometime is a data cable problem.
Click to expand...
Click to collapse
did all you say mate but stiil - fail

Now the computer says that the usb is unrequgnized ?
after i install the drivers:
http://www.mediafire.com/?spf3928sdnde4o3 --> what can i do now please ?
tnx.

[Q] Is my Defy dead/bricked?

Is my Defy dead?
I was messing around in recovery mode and formatted internal memory by mistake now my defy is completely dead. See below for symptoms;
It doesn't turn on, no bootloader, no recovery..
No function Power + Vol+/-.
LED does not light with or without usb.
Only when I connect it to my PC (windows 7 x64) and insert the battery, is there any kind of response makes the same sound as it does when a plug and play device is connected, but off again at 2-3 seconds. Tries to install OMAP3630 drivers but fails saying device is unplugged. (see attached image) Have installed latest Latest Motorola Handset drivers to no avail.
RSD Lite 5.5 (ran in adminstrator mode) does not show device, not even a white LED as mentioned in other posts.
Tried using the Macgyver method to 'jump start' in order for RSD Lite to detect phone no difference.
Any help would be greatly appreciated ?
Chris

R.I.P
No way to fix it
Sent from my MB526 using xda premium

Charge ur battery with external charger OR Change ur Battery.

jalal-jap said:
Charge ur battery with external charger OR Change ur Battery.
Click to expand...
Click to collapse
Thanks for the reply, doesn't the macgyver hack offer a workaround to not having the battery fully charged?

Yes, it does
Just to confirm, before this unfortunate incident you were able to flash sbfs right?
Sent from my MB526 using xda premium

I assume so. Although I didn't have any need too at the time but do now.

I'm asking the question since there may be a driver problem. Although another person like you had mistakenly formatted internal memory and was unable to resurrect it. So you have really slim chances, if any at all.
Sent from my Nexus 7 using XDA Premium HD app

[Q] Defy bricked and doesn't detect my phone on any systems

I have tried all different cables and computers... i just get unknown device when i plug my phone in rsd lite... i tried to change the usb charging port still no success in it... i have uninstalled and installed the motorola drivers and tried all available rsd lite... but no success :crying: any help to sort this issue...

sunnysays said:
I have tried all different cables and computers... i just get unknown device when i plug my phone in rsd lite... i tried to change the usb charging port still no success in it... i have uninstalled and installed the motorola drivers and tried all available rsd lite... but no success :crying: any help to sort this issue...
Click to expand...
Click to collapse
Are you able to enter bootloader mode on your phone? (Power on while holding the "volume up" button. If that doesn't work, try pulling the battery and re-inserting it while holding the power and volume up buttons.) Then try connecting to RSD Lite.
If all else fails, you could try using the sbf_flash tool in a linux environment. See here and here for guides.
If you don't have a computer with Linux, you can run it from a usb thumb drive with this. If you haven't used linux before, Ubuntu is probably easiest to use.

i am able to enter to bootloader mode but the phone is been detected as UNKNOWN DEVICE...

Proverbs2 said:
Are you able to enter bootloader mode on your phone? (Power on while holding the "volume up" button. If that doesn't work, try pulling the battery and re-inserting it while holding the power and volume up buttons.) Then try connecting to RSD Lite.
If all else fails, you could try using the sbf_flash tool in a linux environment. See here and here for guides.
If you don't have a computer with Linux, you can run it from a usb thumb drive with this. If you haven't used linux before, Ubuntu is probably easiest to use.
Click to expand...
Click to collapse
i am able to enter to bootloader mode but the phone is been detected as UNKNOWN DEVICE... any idea to do it windows

sunnysays said:
i am able to enter to bootloader mode but the phone is been detected as UNKNOWN DEVICE... any idea to do it windows
Click to expand...
Click to collapse
Did you install the moto drivers on your PC?

Proverbs2 said:
Did you install the moto drivers on your PC?
Click to expand...
Click to collapse
yup all latest drives... i have tried uninstalling and installing multiple times but of no use

sunnysays said:
yup all latest drives... i have tried uninstalling and installing multiple times but of no use
Click to expand...
Click to collapse
That's strange. Does the Bootloader screen say "Battery OK, OK to program, Connect USB Data Cable"? Do you see anything else in RSD Lite besides "Unknown Device"?
You could try using USBDeview on your PC to try to figure out what sort of device your PC thinks your phone is. If the phone is in bootloader mode connected properly, you should see "Motorola Flash Interface" listed under the connected devices, and if you double-click on it, you'll see more information that might help with troubleshooting. What driver version do you see there?
I've attached a screenshot so you can see what it's supposed to look like.

Proverbs2 said:
That's strange. Does the Bootloader screen say "Battery OK, OK to program, Connect USB Data Cable"? Do you see anything else in RSD Lite besides "Unknown Device"?
You could try using USBDeview on your PC to try to figure out what sort of device your PC thinks your phone is. If the phone is in bootloader mode connected properly, you should see "Motorola Flash Interface" listed under the connected devices, and if you double-click on it, you'll see more information that might help with troubleshooting. What driver version do you see there?
I've attached a screenshot so you can see what it's supposed to look like.
Click to expand...
Click to collapse
Bootloader screen say Battery OK, OK to program, Transfer mode :USB the problem is my windows doesnt detect the device and RSD lite doesnt show my device

sunnysays said:
Bootloader screen say Battery OK, OK to program, Connect USB Data Cable Transfer mode :USB the problem is my windows doesnt detect the device and RSD lite doesnt show my device
Click to expand...
Click to collapse
Ok, what do you see in USBDeview?

Try in another pc or in a virtual machine of Windows XP, or check in which usb port you're plugging on the cable, in my computer with Windows 8 for example, I have 4 ports on the back of the cpu and 2 on the front, the front ones don't work to use RDSLite but they work for mass storage and debugging without any problems, but for RDSLite I have to use the back ports
Sent from my MB526 using Tapatalk

Proverbs2 said:
Ok, what do you see in USBDeview?
Click to expand...
Click to collapse
i see nothing

DiegoxG said:
Try in another pc or in a virtual machine of Windows XP, or check in which usb port you're plugging on the cable, in my computer with Windows 8 for example, I have 4 ports on the back of the cpu and 2 on the front, the front ones don't work to use RDSLite but they work for mass storage and debugging without any problems, but for RDSLite I have to use the back ports
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
I have tried it on other pc and on xp to and tried different usb port and cables too but no use

Looks like you're using an old version of RDSLite, why not trying another one? Maybe 5.6
Sent from my MB526 using Tapatalk

DiegoxG said:
Looks like you're using an old version of RDSLite, why not trying another one? Maybe 5.6
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
tried all rsd lite version

sunnysays said:
i see nothing
Click to expand...
Click to collapse
That's not good. If your phone is going into bootloader mode but USBDeview isn't picking up any signal from the USB, it may be a hardware problem. How did your phone get bricked? Was its USB port working properly before that?

Proverbs2 said:
That's not good. If your phone is going into bootloader mode but USBDeview isn't picking up any signal from the USB, it may be a hardware problem. How did your phone get bricked? Was its USB port working properly before that?
Click to expand...
Click to collapse
it was working properly before... i have tried different usb charging port too.. but still face the same problem :crying: phone got bricked by using defy_safe_wipe and i rebooted accidentally :crying:

sunnysays said:
it was working properly before... i have tried different usb charging port too.. but still face the same problem :crying: phone got bricked by using defy_safe_wipe and i rebooted accidentally :crying:
Click to expand...
Click to collapse
Hmm, the safewipe script isn't supposed to touch the recovery partition. Can you get into stock recovery? (Take the battery out, then put it back in while holding the volume down and power buttons at the same time.) If you can get into the stock recovery, do a full factory reset, then try flashing an sbf again.

Proverbs2 said:
Hmm, the safewipe script isn't supposed to touch the recovery partition. Can you get into stock recovery? (Take the battery out, then put it back in while holding the volume down and power buttons at the same time.) If you can get into the stock recovery, do a full factory reset, then try flashing an sbf again.
Click to expand...
Click to collapse
i tried it .. but no stock recovery if i hold it upto 10 mins with volume down and power button.. its totally bricked... only thing is i can get into bootloader....

sunnysays said:
i tried it .. but no stock recovery if i hold it upto 10 mins with volume down and power button.. its totally bricked... only thing is i can get into bootloader....
Click to expand...
Click to collapse
I'm afraid I'm out of ideas, except for trying the sbf_flash tool in Linux. (It's not that hard to use, and you don't have to install Linux on your PC; you can just run it from a usb drive.)

Proverbs2 said:
I'm afraid I'm out of ideas, except for trying the sbf_flash tool in Linux. (It's not that hard to use, and you don't have to install Linux on your PC; you can just run it from a usb drive.)
Click to expand...
Click to collapse
Fine will give a try and let u know