[Q] USB device not recognized - Galaxy Y GT-S5360 and Duos 6102 Q&A, Help & Troubl

I have my galaxy y flashed with JellyBlast4.1 and also merruk kernel 2.5 then reinstalled stock roms because there are so many processes that appears to force stop..
after so many times I reflashed stock rom, jellyblast and merruk the phone cannot go to CWM properly...them CWM menu sometimes appear then mostly its just merruk image with the ClockworkMod Recovery v5.0.2.6 text....
I can still connect to ODIN mode but several PC cant recognize my device...it says USB device not recognized. I installed Kies old version and new version...I also tried using only samsung usb drivers not the kies packages..but still PC saya usb device not recognized...
what can I still do... I'm not able to use my phone for 3 days already...
I tried to connect and disconnect my galaxy y and connect again but I get the same response from the PC....
I also tried to do the reflashing stock rom process via ODIN on other PC's on several computer shops here in my area in Philippines but still cannot reflash stock rom via ODIN because my device cant be recognized...
I have gone to conclusion that some or a specific component of my phone is damaged already...
should I go to service center already???please I still wanna fix this problem on my own with your supports....I dont wanna spend money on service center yet... also I dont have money...im still a student....huhuhuh

Try to flash stock rom via odin on windows vista os pc or windows7 home basic os
I also faced dis prob on my windows7 ultimate os but on windows vista everytime my galaxy y get recognized
Sent from my GT-S5360 using xda premium

Check your cable (You must use factory one)
USB port : use the main
can you post SS

Try flashing a different merruk kernel and see whether the pc detects your device.
Don't do it many times as there can be chances of hard brick.

usb notb detected
miloboy05 said:
I have my galaxy y flashed with JellyBlast4.1 and also merruk kernel 2.5 then reinstalled stock roms because there are so many processes that appears to force stop..
after so many times I reflashed stock rom, jellyblast and merruk the phone cannot go to CWM properly...them CWM menu sometimes appear then mostly its just merruk image with the ClockworkMod Recovery v5.0.2.6 text....
I can still connect to ODIN mode but several PC cant recognize my device...it says USB device not recognized. I installed Kies old version and new version...I also tried using only samsung usb drivers not the kies packages..but still PC saya usb device not recognized...
what can I still do... I'm not able to use my phone for 3 days already...
I tried to connect and disconnect my galaxy y and connect again but I get the same response from the PC....
I also tried to do the reflashing stock rom process via ODIN on other PC's on several computer shops here in my area in Philippines but still cannot reflash stock rom via ODIN because my device cant be recognized...
I have gone to conclusion that some or a specific component of my phone is damaged already...
should I go to service center already???please I still wanna fix this problem on my own with your supports....I dont wanna spend money on service center yet... also I dont have money...im still a student....huhuhuh
Click to expand...
Click to collapse
Dude install samsung kies don't update try to wait give it like 5 minutes it works for me using windows 7 ultimate

its now getting detected but git stucked on setup connection on odin 1.85,,,id:com on odin has already turned yellow below with 0:[COM5]

thanks for all you that respond to mt post :good:

thankx
Mohamed.Anwar said:
Check your cable (You must use factory one)
USB port : use the main
can you post SS
Click to expand...
Click to collapse
That is very helpful n you save my phone, thankx bro

my phone samsung galaxy y GT 5360 was working just fine...then today i got an update then i downloaded it..n started installing update but it stucked at 88% for long time so i switched it off during installing..n then it is stuck on the start up logo n nothing happens futhur..n whn i connect to it to computer for odin it says unknow device unable to install drivers...pls help i followed all threads !! bt could not found any useful info ~

flash stock rom using odin

Reynaldi said:
flash stock rom using odin
Click to expand...
Click to collapse
I am facing a similar issue. Is there a solution yet ?
My Galaxy Y shows up the Welcome LOGO and goes OFF in say about 10 seconds.
I tried going into recovery mode/ download mode , but the operation lasts for only 10 seconds approximately.
Trying to connect the Phone to my PC fails with some "Unable to connect via USB" kind of a warning.
Any help is highly appreciated.

Hello!
kshashank said:
my phone samsung galaxy y GT 5360 was working just fine...then today i got an update then i downloaded it..n started installing update but it stucked at 88% for long time so i switched it off during installing..n then it is stuck on the start up logo n nothing happens futhur..n whn i connect to it to computer for odin it says unknow device unable to install drivers...pls help i followed all threads !! bt could not found any useful info ~
Click to expand...
Click to collapse
Use linux OS( in computer ) because no drivers are needed there.... :good:
BUT....
I dont know whether ODIN is available for LINUX OS...
Anyway try searching... :good:

walley0 said:
I am facing a similar issue. Is there a solution yet ?
My Galaxy Y shows up the Welcome LOGO and goes OFF in say about 10 seconds.
I tried going into recovery mode/ download mode , but the operation lasts for only 10 seconds approximately.
Trying to connect the Phone to my PC fails with some "Unable to connect via USB" kind of a warning.
Any help is highly appreciated.
Click to expand...
Click to collapse
try connecting without battery
and go into download mode

lvabarajithan said:
Use linux OS( in computer ) because no drivers are needed there.... :good:
Click to expand...
Click to collapse
Will give this a TRY. Nice clicked though
---------- Post added at 11:52 AM ---------- Previous post was at 11:36 AM ----------
sangalaxy said:
try connecting without battery
and go into download mode
Click to expand...
Click to collapse
Are you serious ? Connect it without the battery ?
Weird aah

walley0 said:
Are you serious ? Connect it without the battery ?
Weird aah
Click to expand...
Click to collapse
A usb cable carries power so you can enter download mode without the battery

marcussmith2626 said:
A usb cable carries power so you can enter download mode without the battery
Click to expand...
Click to collapse
"USB Device not recognised"
No luck.

walley0 said:
"USB Device not recognised"
No luck.
Click to expand...
Click to collapse
Make sure keis is not installed (conflicts with odin) and install Samsung drivers
Or try a different pc or Google what to do when phone not recognised - the answers are there

install samsung drivers
noo need of kies
switch off the phone
and then connect ur data cable to ur pc qnd then pressing the
volume down+home key+powerkey u will
enter into download mode ..
then ur phone will be detected by the pc..
Sent from my GT-S5360 using xda app-developers app

Use Odin/download samsung mobile usb driver.exe and restart your comp.
-Your Region Pack Select.
-Flash

Are you serious ? Connect it without the battery ?
Weird aah
Click to expand...
Click to collapse
Surely it will work... :fingers-crossed: :fingers-crossed: :fingers-crossed:

Related

Help Me Please Please

Hi
I Have Samsung Galaxy S.
I Have Installed Paranoid Custom ROM On My Device Now I Need To Flush The Original ROM
But I have Problem : When i connect my phone to pc the phone doesn't show any thing any connection massage and even if i enter the phone in downloading mode the pc and the phone doesn't show show any thing
Please I Need help i can't flash any stock rom please help:crying::crying::crying::crying:
Hi Syrian Eagle,
You should
Boot into "Download Mode"
start odin / heimdall
connect with computer via USB
load Stock firmware files
click on "Flash"- / "Start" - Button (I can't remember how is called)
http://forum.xda-developers.com/showthread.php?t=1637966
You could use this tutorial..you'll find package with Samsung drivers etc..make sure you have uninstalled old drivers & rebooted before installing new ones.
Also make sure you have working USB cable etc.
Sent from my GT-I9000 using Tapatalk 2
I forgot to post links
Here will you find Stock Firmwares
http://cur.lv/2j5o
Flash Guide
http://cur.lv/2j5p
Drivers
http://cur.lv/2j5q
Flashprograms
http://cur.lv/2j5r
Service Manuals
http://cur.lv/2j5s
diklooc said:
Hi Syrian Eagle,
You should
Boot into "Download Mode"
start odin / heimdall
connect with computer via USB
load Stock firmware files
click on "Flash"- / "Start" - Button (I can't remember how is called)
Click to expand...
Click to collapse
Thanks for your help but my problem is when i connect my phone in download mode or regular mode the pc doesn't see my phone and my phone doesn't say any thing (like if he is not connected) i think not a driver issue because previously i connect the phone into ODIN but now after flushing the paranoid ROM this problem appear .
Kurre said:
http://forum.xda-developers.com/showthread.php?t=1637966
You could use this tutorial..you'll find package with Samsung drivers etc..make sure you have uninstalled old drivers & rebooted before installing new ones.
Also make sure you have working USB cable etc.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
The problem is when i connect my phone to pc the phone doesn't show any thing and the pc doesn't show any thing too .
when i connect my hone appears like if he is not connected.
Syrian Eagle said:
The problem is when i connect my phone to pc the phone doesn't show any thing and the pc doesn't show any thing too .
when i connect my hone appears like if he is not connected.
Click to expand...
Click to collapse
Your USB cable must be damaged or your USB port may need cleaning or damaged try these solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Syrian Eagle said:
Thanks for your help but my problem is when i connect my phone in download mode or regular mode the pc doesn't see my phone and my phone doesn't say any thing (like if he is not connected) i think not a driver issue because previously i connect the phone into ODIN but now after flushing the paranoid ROM this problem appear .
Click to expand...
Click to collapse
If you have come from a GingerBread ROM that would be correct.
ICS/JB ROMS USE DIFFERENT DRIVERS
Now follow the advise and reinstall the samsung drivers and try again.
Lexrsk said:
If you have come from a GingerBread ROM that would be correct.
ICS/JB ROMS USE DIFFERENT DRIVERS
Now follow the advise and reinstall the samsung drivers and try again.
Click to expand...
Click to collapse
Ok How Can I Install the ICS/JB Drivers into my phone :crying::crying::crying::crying:
xsenman said:
Your USB cable must be damaged or your USB port may need cleaning or damaged try these solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Click to expand...
Click to collapse
Thank you very much but my problem is not resolved because when i connect my phone into the pc my phone and the pc doesn't show any thing like if he is not connected
Turn off the phone, remove battery, wait 1 minute, put the battery back and restart the phone. Then connect the phone to your pc and see if that helped.
Sent from my GT-I9000 using Tapatalk 2
Syrian Eagle said:
Thank you very much but my problem is not resolved because when i connect my phone into the pc my phone and the pc doesn't show any thing like if he is not connected
Click to expand...
Click to collapse
Every possible reason and solutions that I am aware of, for them are mentioned on that link , you have to try and test each one out, including various Drivers, for you to test...
BUT you keep saying there was no Sign of connection, which means the PC does not say anything (like unknown USB Device) or make a sound and your USB icon does not appear on the phone...am I correct???
That simply means there is NO link, which means, its either your USB cable or USB Port is damaged
alexovy said:
Turn off the phone, remove battery, wait 1 minute, put the battery back and restart the phone. Then connect the phone to your pc and see if that helped.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
Sorry nothing get petter still the problem

[Q] Odin can't detect download mode.

So I already tried reading most of the threads about this problem but sadly I wasn't able to find the answer to my problem. I just recently reformatted my computer and thought that I want to return to stock ROM for now. But when I entered download mode and plugged the cable in, Odin cannot detect the phone.
I got frustrated after trying so I restarted my phone without disconnecting the cable. When the phone booted up normally, Odin was able to detect the phone, so I tried download mode again, nothing, now I tried recovery mode, detected.
I already tried:
- Installing Kies
- Installing just the drivers
- Trying debug on/off
Also, I've been having problems with "Samsung Mobile USB Modem" "An error occurred during the installation of the device. The required section was not found in the INF." Could this be the cause of the first problem?
Yes I just made this account to ask you guys this.
try new version odin search at caliban666 thread,if im not wrong he post a new version of odin.try installing a new samsung driver at dokys thread.i hope this will help u...
Try installing the drivers again..
If possible download them again..
**rooting is new for me...and i am noob to root...**
So only the download mode that isn't detected by odin? I have the same problem before. Here, when you go into download mode but odin doesn't detect your phone, press the power button until your phone turns black and don't let it to reboot. If your phone already turns black then go into download mode again (volume down+power+home). Odin should detect it.
For your 2nd problem, here you can download the samsung usb driver pack, I also experienced that after installing kies then "an error occured blabla". Driver here: http://forum.xda-developers.com/showthread.php?p=11498043
Sent from my GT-S5360 using xda premium
No luck.
I just tried the new Odin and installed the new Samsung drivers.
It's still the same for both problems.
- can't detect phone in download mode but it can detect the phone in normal and recovery mode.
- samsung mobile USB modem error still persists
Your os must be corrupted!!! I
Sent from my GT-S5360 using xda premium
Try this...
Install drivers again...
*Dont connect ur usb now*
Now go to download.mode...
*now connect ur pc with ur phone via usb...*
.
Wait for a min...
Now press up...
...
Maybe this help
**rooting is new for me...and i am noob to root...**
AMAZING...
menewtoroot said:
Try this...
Install drivers again...
*Dont connect ur usb now*
Now go to download.mode...
*now connect ur pc with ur phone via usb...*
.
Wait for a min...
Now press up...
...
Maybe this help
**rooting is new for me...and i am noob to root...**
Click to expand...
Click to collapse
thanks for your help...your the best....now odin can detect my s6102.....KEN from PHILIPPINES
nnehk02 said:
thanks for your help...your the best....now odin can detect my s6102.....KEN from PHILIPPINES
Click to expand...
Click to collapse
well.. u can rather press it ...
anyways.. dn't thnk me.. thnk to the creator of odin... android... savie for packages... nd others... (sry if i 4gt someones name)
Hi....my phone get detected by odin wen it is switched off nd connected to p.c but not in download mode. I soft bricked my device nd really need to use odin...can any1 help...it only stops gettng detected in download mode...shows 0003 added nd ol wen switched off
sarnz said:
Hi....my phone get detected by odin wen it is switched off nd connected to p.c but not in download mode. I soft bricked my device nd really need to use odin...can any1 help...it only stops gettng detected in download mode...shows 0003 added nd ol wen switched off
Click to expand...
Click to collapse
try this - maybe work . reinstall your usb samsung driver - restart you pc/laptop - put you phone to download mod (dont continue yet) - if you on pc put you usb cable at rear port not front - then connect you usb to phone - wait 30 second - and continue you phone to download mod . if still not show - put out you usb cable from phone - off and back to download mod without usb cable - wait then connect you usb cable . im got same problem as you before - and try use another usb cable .
Sent from my GT-S5360
put your phone in download mode and connect to computer
open odin
remove battery from the phone
odin will now see the phone connected
reinsert battery
Can a member who can use Odin with their GT-S5360 connect the 5360 in "Download Mode" to their PC, open Windows Device Manager and copy / paste the Device Instance ID shown under:
+Universal Serial Bus controllers
...Composite Device
by right-clicking it, choose Properties, then Details?
On my PC, it is shown as 'Unkown Device' with the following Device Instance ID:
USB\VID_0000&PID_0000\5&2E64F456&0&1
Which is most likely not what it should be.
I want to know what it should be.
I have two Galaxy Y's (one soft-bricked, the other working fine) and both show the same ID.
BTW, I have tried every port on the back of my PC with four Samsung data cables and three third-party cables and I cannot get Windows or Odin to recognize the GT-S5360 in download mode (both phones).
I have downloaded and installed / uninstalled / rebooted, etc. with the following versions of Samsung USB Driver for Mobile Phones:
1.3.1500
1.4.8
1.5.9
1.5.15
1.5.23
1.5.33
I have downloaded but cannot install version:
1.5.49
MCC InstallWizard says it "could not" install the drivers but no error message or log is given.
And for some reason, the "have disk" method of installing the drivers doesn't work either.
My PC is running XP SP3 x86, offline.
I download all files to my working phone, and transfer them to the PC.
One last thing, can someone who has USB driver version 1.5.49 installed, open Windows Services and check to see if the Samsung Connection service has started and is running?
Phone not detected on ODIN
When i connect my Grand 2 to my laptop... it is connected as MPT and showing as detected on PC... when i start ODIN. it doesnt give the yellow/blue light. The phone is also not detected on KIES (both versions). but i can copy files through windows explorer.
I have galaxy S2 and Note 3. they are both detected on odin. But Grand 2 is not.
I have installed usb drivers, reinstalled adb drivers on device manager, changed the cable. Nothing worked for grand 2.
Please help!!
Anser117 said:
When i connect my Grand 2 to my laptop... it is connected as MPT and showing as detected on PC... when i start ODIN. it doesnt give the yellow/blue light. The phone is also not detected on KIES (both versions). but i can copy files through windows explorer.
I have galaxy S2 and Note 3. they are both detected on odin. But Grand 2 is not.
I have installed usb drivers, reinstalled adb drivers on device manager, changed the cable. Nothing worked for grand 2.
Please help!!
Click to expand...
Click to collapse
m having same problem as you.
did you get any solution?
Simple solution.
kilogrip said:
Can a member who can use Odin with their GT-S5360 connect the 5360 in "Download Mode" to their PC, open Windows Device Manager and copy / paste the Device Instance ID shown under:
+Universal Serial Bus controllers
...Composite Device
by right-clicking it, choose Properties, then Details?
On my PC, it is shown as 'Unkown Device' with the following Device Instance ID:
USB\VID_0000&PID_0000\5&2E64F456&0&1
Which is most likely not what it should be.
I want to know what it should be.
I have two Galaxy Y's (one soft-bricked, the other working fine) and both show the same ID.
BTW, I have tried every port on the back of my PC with four Samsung data cables and three third-party cables and I cannot get Windows or Odin to recognize the GT-S5360 in download mode (both phones).
I have downloaded and installed / uninstalled / rebooted, etc. with the following versions of Samsung USB Driver for Mobile Phones:
1.3.1500
1.4.8
1.5.9
1.5.15
1.5.23
1.5.33
I have downloaded but cannot install version:
1.5.49
MCC InstallWizard says it "could not" install the drivers but no error message or log is given.
And for some reason, the "have disk" method of installing the drivers doesn't work either.
My PC is running XP SP3 x86, offline.
I download all files to my working phone, and transfer them to the PC.
One last thing, can someone who has USB driver version 1.5.49 installed, open Windows Services and check to see if the Samsung Connection service has started and is running?
Click to expand...
Click to collapse
Just reinstall your operating system of pc and install the drivers again. Everything will be fine.
Else try connecting it to another computer. It will WORK for 100^(1000000)%.
Hope it was helpful.
You should install full driver for SGY
I have tried to upgrade my galaxy y with cyanogen Android 4.4, when I tried to install using recovery mode my phone suddenly switched off.. And restarted. But struck in logo so I tried to reflash it but recovery mode was not showing it just struck at logo, & I even tried odin mode after several attempts it is opening download mode just once in a 20-30times, & cannot detect my phone in odin mode.. Do u guys have any suggestions??
I have tried to upgrade my galaxy y with cyanogen Android 4.4, when I tried to install using recovery mode my phone suddenly switched off.. And restarted. But struck in logo so I tried to reflash it but recovery mode was not showing it just struck at logo, & I even tried odin mode after several attempts it is opening download mode just once in a 20-30times, & cannot detect my phone in odin mode.. Do u guys have any suggestions??
yunos interface
my samsung grand 2 has "yun os interface" its not detecting by odin please help me

phone seems bricked

hi my mate has and s4 9505 and he wiped the hole phone like a noob and it wont enter recovery and in odin nothing will flash tried pit file and also stockrom it either gets stuck on setting up connection or stuck on pit mapping part tried adb devices command but its not picking up the devices the drivers will be on his comp as he has all ready flashed things via odin before on the s4 any ideas people cheers
strikerdj2011 said:
hi my mate has and s4 9505 and he wiped the hole phone like a noob and it wont enter recovery and in odin nothing will flash tried pit file and also stockrom it either gets stuck on setting up connection or stuck on pit mapping part tried adb devices command but its not picking up the devices the drivers will be on his comp as he has all ready flashed things via odin before on the s4 any ideas people cheers
Click to expand...
Click to collapse
Try that:
You can use this software to repair Your dead Samsung i9505 and similar (m919, i337, L720 etc)
Note, You need to install QHUSB Qualcomm drivers first.
After flashing with this software, You need to flash phone with official firmware and PIT file, otherwise phone will be dead again, and You'll need to repeat the process.
If You get errors reported by this software (command prompt window), You'll have to replace the eMMC chip first.​
Click to expand...
Click to collapse
Warning ..I never tried that..
source​
Please report back if that worked for you.
Thank's
ausdim said:
Try that:
Warning ..I never tried that..
source​
Please report back if that worked for you.
Thank's
Click to expand...
Click to collapse
thanks will try this
I'm in this exact same position. Can you please post back with your results as to how it goes.
Thanks
EDIT - I simply changed USB ports and it worked fine!
oblique1 said:
I'm in this exact same position. Can you please post back with your results as to how it goes.
Thanks
EDIT - I simply changed USB ports and it worked fine!
Click to expand...
Click to collapse
no such luck for us and that the other thing didnt work either :/
Did you install the drivers for the phone?
Did u put phone in download mode and flash with odin?
If so, trying closing all kies process, changing usb port and run odin with admin. Flash pit file and stock firmware.
lzk123 said:
Did you install the drivers for the phone?
Did u put phone in download mode and flash with odin?
If so, trying closing all kies process, changing usb port and run odin with admin. Flash pit file and stock firmware.
Click to expand...
Click to collapse
yea drivers are installed and yea vol down power and home in to download mode we uninstalled kies and installed drivers on own same thing then we re installed kies and same thing tried the 4 usb ports on him comp and when a flash pit or stock rom odin doesn't go past setting up connection
ran the adb command adb devices and it just doesn't seem to be picking up his device
strikerdj2011 said:
yea drivers are installed and yea vol down power and home in to download mode we uninstalled kies and installed drivers on own same thing then we re installed kies and same thing tried the 4 usb ports on him comp and when a flash pit or stock rom odin doesn't go past setting up connection
ran the adb command adb devices and it just doesn't seem to be picking up his device
Click to expand...
Click to collapse
Did u restart the com after reinstalling kies? Try restart computer now and flash.
yea every time a install something and uninstall some thing allways reboot the comp
strikerdj2011 said:
yea every time a install something and uninstall some thing allways reboot the comp
Click to expand...
Click to collapse
What error shows up when u flash stock rom and pit again?
it just stays on setting up connection on odin thats it doesn't go any more past that point
strikerdj2011 said:
it just stays on setting up connection on odin thats it doesn't go any more past that point
Click to expand...
Click to collapse
What odin version are u using? Are u sure you have properly installed kies or drivers? The latest kies version? Try disabling antivirus and installing latest kies.
tried with odin 1.85 3.04 and 3.07 and yea latest kies i uninstalled antivirus to be on safe side as i no it can conflict with odin and stuff
The problems you are having are purely driver issues. Try flashing the phone on another computer.
robogo1982 said:
The problems you are having are purely driver issues. Try flashing the phone on another computer.
Click to expand...
Click to collapse
ok thanks will try it on mine 2 moz cheers
Let us know if it worked
Try a different data cable it worked for me
Sent from my GT-I9505 using xda premium
Well I've had some problems too today and there a couple of things you might want to try (I'm sure one of them will fix it):
- Pick a different USB port (preferably one in the back)
- Try a different USB cable (I used one from my Nexus 7, didn't work. Tried with the original S4 cable, worked)
- Uninstall Kies and the Samsung drivers from you control panel -> programs
- Download the Samsung USB Drivers again (google it) (do not install them yet)
- Download and install USB Deview (google it) and delete every driver of Samsung you come across in the list (just right click and click delete)
- Disable your internet access and reboot
- After rebooting install the Samsung Drivers (without an internet connection)
- Plug in your phone after you've installed the drivers and enable USB Debugging
- Reboot
- Enable your internet connection again
- Try to flash again in Odin (it should work now)
If this won't work, I don't know what will. A different USB port, cable, fresh/original drivers (not the ones Windows Update may try to install for you), etc is probably what you'll need to get it working.
thanks for every ones help we installed a fresh copy of windows 7 and installed every thing again and it worked fine defo must of been driver related :laugh:
Cheers now flash away like there's no tomorrow

[Q] odin cannot find my phone

I made a mistake while changing my rom.Instead of using recovery mode i use download mode so its all messed up.This samsung galaxy logo hanging but nothing happens.Its bricked totally.And when i connect my device GT S 5360 with usb and open odin it does not recognise nothing happens not even that yellow colour.I've done many times changing my rom rom from this to that but this is the first time i face this type of probs which i cant solve.Any type of suggestion will be most appreciated.
Thanks
Reinstall the USB drivers on your PC and then try.
aniket.lamba said:
Reinstall the USB drivers on your PC and then try.
Click to expand...
Click to collapse
i already did that but doesnt help:crying:
I am facing that problem too.
Both mass storage and download mode is not been recognized. But it works wither other phones.
use usb jig
oden cannot read ur galaxy y
Gexg said:
I made a mistake while changing my rom.Instead of using recovery mode i use download mode so its all messed up.This samsung galaxy logo hanging but nothing happens.Its bricked totally.And when i connect my device GT S 5360 with usb and open odin it does not recognise nothing happens not even that yellow colour.I've done many times changing my rom rom from this to that but this is the first time i face this type of probs which i cant solve.Any type of suggestion will be most appreciated.
Thanks
Click to expand...
Click to collapse
sir/maam have you tried installing again the usb driver.. then turn your phone to download mode.. try this in many trials.. godbless
Minions_Army said:
use usb jig
Click to expand...
Click to collapse
How to make it? And wont it hardbrick?
Jig is for unbrick,so it cant brick your device,look in general section for it or on facebook,ive and some others posted info about it.
GREETZ FROM TEAM-OPTIMA!!!
I finally solved my problem.Its easy yet very tactical.Its not about reinstalling the usb driver on ur pc or it doesnt have anything to do with ur odin version.Just get another GT S 5360 from ur friend and connect that mobile with ur pc.And now try yours u will see the magic.
HURRAY:silly::good:
Gexg said:
I finally solved my problem.Its easy yet very tactical.Its not about reinstalling the usb driver on ur pc or it doesnt have anything to do with ur odin version.Just get another GT S 5360 from ur friend and connect that mobile with ur pc.And now try yours u will see the magic.
HURRAY:silly::good:
Click to expand...
Click to collapse
or try to off your phone before connecting to pc then go to odin mode while connecting to pc.
Uninstall the USB drivers, and reinstall the newest version.

[Q] Help ! my sm-g530h usb not recognized

I can't update firmware using odin ,it keep saying not recognized ,any other ways can i flash firmware without using usb port? Hope anyone can help me
Did you try on another pc? Test it, maybe your pc is the one with the problem.
you can flash with out pc, sadly there are none rom at the moment to flash trough recovery.
syverman said:
Did you try on another pc? Test it, maybe your pc is the one with the problem.
you can flash with out pc, sadly there are none rom at the moment to flash trough recovery.
Click to expand...
Click to collapse
i have try many cable, computer but its still same. its just charging on the phone and not recognized on pc. im stuck on unofficial miui with a lot of bugs, please give me someways to stock my firmware back without using odin or anything that use usb port because my usb port its just for charging only, not working for odin.
Rith click on computer and click on comlutef propeeties then ect device manager u will use warning icon in the list something name i am forget right click on it u will use option update driver click on it then select specific driver path where your driver are installed then search then Huh Huh xD restert your pc then connect your phone:good:
I think problem is with drivers you need reinstall device drivers, first uninstall ur device drivers from device manager then install samsung usb driver software from here ,now drivers will be installed automatically installed on connecting your phone
Download link is below
http://androidhost.org/XIVsA
Sent from my SM-G530H using XDA Free mobile app
my SM-G530H connected and detected in windows but not on samsung kies
Samsung Galaxy Grand Prime SM-G530/H/DV model (G530HXXU1ANIA)
Hi
I have Samsung Galaxy Grand Prime SM-G530/H/DV model (G530HXXU1ANIA) . I did factory Reset . Then TouchWiz stopped problem arose. I disabled TouchWiz and installed APUS Launcher. That worked fine. Then I want to give cell to another person. I did Factory Reset again. After this the following problems arose.
1- A pop up massage during booting arose. “Unfortunately Process com. Android. systemUI has been stopped”
2- Above mentioned message hang the cell on Main Screen, I can not operate any function.
3- IMEI No. INVALID.
4- Mobile cannot be accepted connection with PC, ODIN, Kies etc.
Kindly guide me in this regard as I am a beginner in the matter of programming etc.
M.Abdul Quddus from Pakistan
+923006021721
Did you get this sorted out and how ? I have a similar problem.
Sent from my SM-G530H using XDA Forums
redfeast said:
I think problem is with drivers you need reinstall device drivers, first uninstall ur device drivers from device manager then install samsung usb driver software from here ,now drivers will be installed automatically installed on connecting your phone
Download link is below
http://androidhost.org/XIVsA
Click to expand...
Click to collapse
I doubt it is a driver issue because I have tried multiple systems and these systems recognize other phones instantly
its the same from my phone sadly i didnt find any firmware for this its a clone i think

Categories

Resources