Database Users

Help Me Please Please

Hi
I Have Samsung Galaxy S.
I Have Installed Paranoid Custom ROM On My Device Now I Need To Flush The Original ROM
But I have Problem : When i connect my phone to pc the phone doesn't show any thing any connection massage and even if i enter the phone in downloading mode the pc and the phone doesn't show show any thing
Please I Need help i can't flash any stock rom please help:crying::crying::crying::crying:

Hi Syrian Eagle,
You should
Boot into "Download Mode"
start odin / heimdall
connect with computer via USB
load Stock firmware files
click on "Flash"- / "Start" - Button (I can't remember how is called)

http://forum.xda-developers.com/showthread.php?t=1637966
You could use this tutorial..you'll find package with Samsung drivers etc..make sure you have uninstalled old drivers & rebooted before installing new ones.
Also make sure you have working USB cable etc.
Sent from my GT-I9000 using Tapatalk 2

I forgot to post links
Here will you find Stock Firmwares
http://cur.lv/2j5o
Flash Guide
http://cur.lv/2j5p
Drivers
http://cur.lv/2j5q
Flashprograms
http://cur.lv/2j5r
Service Manuals
http://cur.lv/2j5s

diklooc said:
Hi Syrian Eagle,
You should
Boot into "Download Mode"
start odin / heimdall
connect with computer via USB
load Stock firmware files
click on "Flash"- / "Start" - Button (I can't remember how is called)
Click to expand...
Click to collapse
Thanks for your help but my problem is when i connect my phone in download mode or regular mode the pc doesn't see my phone and my phone doesn't say any thing (like if he is not connected) i think not a driver issue because previously i connect the phone into ODIN but now after flushing the paranoid ROM this problem appear .

Kurre said:
http://forum.xda-developers.com/showthread.php?t=1637966
You could use this tutorial..you'll find package with Samsung drivers etc..make sure you have uninstalled old drivers & rebooted before installing new ones.
Also make sure you have working USB cable etc.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
The problem is when i connect my phone to pc the phone doesn't show any thing and the pc doesn't show any thing too .
when i connect my hone appears like if he is not connected.

Syrian Eagle said:
The problem is when i connect my phone to pc the phone doesn't show any thing and the pc doesn't show any thing too .
when i connect my hone appears like if he is not connected.
Click to expand...
Click to collapse
Your USB cable must be damaged or your USB port may need cleaning or damaged try these solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571

Syrian Eagle said:
Thanks for your help but my problem is when i connect my phone in download mode or regular mode the pc doesn't see my phone and my phone doesn't say any thing (like if he is not connected) i think not a driver issue because previously i connect the phone into ODIN but now after flushing the paranoid ROM this problem appear .
Click to expand...
Click to collapse
If you have come from a GingerBread ROM that would be correct.
ICS/JB ROMS USE DIFFERENT DRIVERS
Now follow the advise and reinstall the samsung drivers and try again.

Lexrsk said:
If you have come from a GingerBread ROM that would be correct.
ICS/JB ROMS USE DIFFERENT DRIVERS
Now follow the advise and reinstall the samsung drivers and try again.
Click to expand...
Click to collapse
Ok How Can I Install the ICS/JB Drivers into my phone :crying::crying::crying::crying:

xsenman said:
Your USB cable must be damaged or your USB port may need cleaning or damaged try these solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Click to expand...
Click to collapse
Thank you very much but my problem is not resolved because when i connect my phone into the pc my phone and the pc doesn't show any thing like if he is not connected

Turn off the phone, remove battery, wait 1 minute, put the battery back and restart the phone. Then connect the phone to your pc and see if that helped.
Sent from my GT-I9000 using Tapatalk 2

Syrian Eagle said:
Thank you very much but my problem is not resolved because when i connect my phone into the pc my phone and the pc doesn't show any thing like if he is not connected
Click to expand...
Click to collapse
Every possible reason and solutions that I am aware of, for them are mentioned on that link , you have to try and test each one out, including various Drivers, for you to test...
BUT you keep saying there was no Sign of connection, which means the PC does not say anything (like unknown USB Device) or make a sound and your USB icon does not appear on the phone...am I correct???
That simply means there is NO link, which means, its either your USB cable or USB Port is damaged

alexovy said:
Turn off the phone, remove battery, wait 1 minute, put the battery back and restart the phone. Then connect the phone to your pc and see if that helped.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
Sorry nothing get petter still the problem

[Q] Can't debugging usb and connect to kies and odin

hello
i cant flash my costume rom to stock rom because it wasn't showing in odin.
also before i installed costume rom in my stock rom i wasn't able to connect to samsung kies
i have been already checked usb debugging in settings>apps>development
Please help me!!!
p.s.: i can connect phone to the pc to storage.

There is a searchbutton and believe me the button is real.
MANY GREEEEETZ!!!

CALIBAN666 said:
There is a searchbutton and believe me the button is real.
MANY GREEEEETZ!!!
Click to expand...
Click to collapse
well,i couldn't found this problem in the forums and all of those that i've found wasn't the same as my device!
:good:

Try closing all kies processes before flashing.

Uninstall kies....
Install driver pack (search it)
Nw connect ur phone...
Wait for some time till it recognise it then remove it...
Goto download mode...
Open odin
Connect ur phone
Odin will show like [COM:00x]
x is a number
Sent from my GT-S5360 using xda premium

[Q] USB device not recognized

I have my galaxy y flashed with JellyBlast4.1 and also merruk kernel 2.5 then reinstalled stock roms because there are so many processes that appears to force stop..
after so many times I reflashed stock rom, jellyblast and merruk the phone cannot go to CWM properly...them CWM menu sometimes appear then mostly its just merruk image with the ClockworkMod Recovery v5.0.2.6 text....
I can still connect to ODIN mode but several PC cant recognize my device...it says USB device not recognized. I installed Kies old version and new version...I also tried using only samsung usb drivers not the kies packages..but still PC saya usb device not recognized...
what can I still do... I'm not able to use my phone for 3 days already...
I tried to connect and disconnect my galaxy y and connect again but I get the same response from the PC....
I also tried to do the reflashing stock rom process via ODIN on other PC's on several computer shops here in my area in Philippines but still cannot reflash stock rom via ODIN because my device cant be recognized...
I have gone to conclusion that some or a specific component of my phone is damaged already...
should I go to service center already???please I still wanna fix this problem on my own with your supports....I dont wanna spend money on service center yet... also I dont have money...im still a student....huhuhuh

Try to flash stock rom via odin on windows vista os pc or windows7 home basic os
I also faced dis prob on my windows7 ultimate os but on windows vista everytime my galaxy y get recognized
Sent from my GT-S5360 using xda premium

Check your cable (You must use factory one)
USB port : use the main
can you post SS

Try flashing a different merruk kernel and see whether the pc detects your device.
Don't do it many times as there can be chances of hard brick.

usb notb detected
miloboy05 said:
I have my galaxy y flashed with JellyBlast4.1 and also merruk kernel 2.5 then reinstalled stock roms because there are so many processes that appears to force stop..
after so many times I reflashed stock rom, jellyblast and merruk the phone cannot go to CWM properly...them CWM menu sometimes appear then mostly its just merruk image with the ClockworkMod Recovery v5.0.2.6 text....
I can still connect to ODIN mode but several PC cant recognize my device...it says USB device not recognized. I installed Kies old version and new version...I also tried using only samsung usb drivers not the kies packages..but still PC saya usb device not recognized...
what can I still do... I'm not able to use my phone for 3 days already...
I tried to connect and disconnect my galaxy y and connect again but I get the same response from the PC....
I also tried to do the reflashing stock rom process via ODIN on other PC's on several computer shops here in my area in Philippines but still cannot reflash stock rom via ODIN because my device cant be recognized...
I have gone to conclusion that some or a specific component of my phone is damaged already...
should I go to service center already???please I still wanna fix this problem on my own with your supports....I dont wanna spend money on service center yet... also I dont have money...im still a student....huhuhuh
Click to expand...
Click to collapse
Dude install samsung kies don't update try to wait give it like 5 minutes it works for me using windows 7 ultimate

its now getting detected but git stucked on setup connection on odin 1.85,,,id:com on odin has already turned yellow below with 0:[COM5]

thanks for all you that respond to mt post :good:

thankx
Mohamed.Anwar said:
Check your cable (You must use factory one)
USB port : use the main
can you post SS
Click to expand...
Click to collapse
That is very helpful n you save my phone, thankx bro

my phone samsung galaxy y GT 5360 was working just fine...then today i got an update then i downloaded it..n started installing update but it stucked at 88% for long time so i switched it off during installing..n then it is stuck on the start up logo n nothing happens futhur..n whn i connect to it to computer for odin it says unknow device unable to install drivers...pls help i followed all threads !! bt could not found any useful info ~

flash stock rom using odin

Reynaldi said:
flash stock rom using odin
Click to expand...
Click to collapse
I am facing a similar issue. Is there a solution yet ?
My Galaxy Y shows up the Welcome LOGO and goes OFF in say about 10 seconds.
I tried going into recovery mode/ download mode , but the operation lasts for only 10 seconds approximately.
Trying to connect the Phone to my PC fails with some "Unable to connect via USB" kind of a warning.
Any help is highly appreciated.

Hello!
kshashank said:
my phone samsung galaxy y GT 5360 was working just fine...then today i got an update then i downloaded it..n started installing update but it stucked at 88% for long time so i switched it off during installing..n then it is stuck on the start up logo n nothing happens futhur..n whn i connect to it to computer for odin it says unknow device unable to install drivers...pls help i followed all threads !! bt could not found any useful info ~
Click to expand...
Click to collapse
Use linux OS( in computer ) because no drivers are needed there.... :good:
BUT....
I dont know whether ODIN is available for LINUX OS...
Anyway try searching... :good:

walley0 said:
I am facing a similar issue. Is there a solution yet ?
My Galaxy Y shows up the Welcome LOGO and goes OFF in say about 10 seconds.
I tried going into recovery mode/ download mode , but the operation lasts for only 10 seconds approximately.
Trying to connect the Phone to my PC fails with some "Unable to connect via USB" kind of a warning.
Any help is highly appreciated.
Click to expand...
Click to collapse
try connecting without battery
and go into download mode

lvabarajithan said:
Use linux OS( in computer ) because no drivers are needed there.... :good:
Click to expand...
Click to collapse
Will give this a TRY. Nice clicked though
---------- Post added at 11:52 AM ---------- Previous post was at 11:36 AM ----------
sangalaxy said:
try connecting without battery
and go into download mode
Click to expand...
Click to collapse
Are you serious ? Connect it without the battery ?
Weird aah

walley0 said:
Are you serious ? Connect it without the battery ?
Weird aah
Click to expand...
Click to collapse
A usb cable carries power so you can enter download mode without the battery

marcussmith2626 said:
A usb cable carries power so you can enter download mode without the battery
Click to expand...
Click to collapse
"USB Device not recognised"
No luck.

walley0 said:
"USB Device not recognised"
No luck.
Click to expand...
Click to collapse
Make sure keis is not installed (conflicts with odin) and install Samsung drivers
Or try a different pc or Google what to do when phone not recognised - the answers are there

install samsung drivers
noo need of kies
switch off the phone
and then connect ur data cable to ur pc qnd then pressing the
volume down+home key+powerkey u will
enter into download mode ..
then ur phone will be detected by the pc..
Sent from my GT-S5360 using xda app-developers app

Use Odin/download samsung mobile usb driver.exe and restart your comp.
-Your Region Pack Select.
-Flash

Are you serious ? Connect it without the battery ?
Weird aah
Click to expand...
Click to collapse
Surely it will work... :fingers-crossed: :fingers-crossed: :fingers-crossed:

[Q]_S5360, USB Device Not Recognized_ Help plz

I tried a ROM, and i fail, i can't turn on my phone (s5360), i must back my phone to STOCK ROM with Odin, but USB Device Not Recognized, i installed driver, help me

follow the instructions on my thread
http://forum.xda-developers.com/showthread.php?t=2568853
if you have installed the driver correctly using rear usb ports if on a pc and set your phone to download mode correctly there is no reason why odin will not display com then a number in a coloured box under com:id which shows odin is connected and you have android adb device displayed in device manager

thanks your help but it not work
thanks your help but it not work, :crying: i tried kies, it also not work

gemnett said:
thanks your help but it not work, :crying: i tried kies, it also not work
Click to expand...
Click to collapse
you can not use kies to flash or restore firmware on galaxy y - it is not supported and kies is just not needed
if you have installed the usb drivers from the link in my thread (in compatibility mode if on windows 8/8.1) - are using a working usb cable rear usb ports on pc and correct split firmware from my thread it will work
unless you have a faulty usb port/cable it will be due to user error

gemnett said:
thanks your help but it not work, :crying: i tried kies, it also not work
Click to expand...
Click to collapse
Are you boot into download mode already? If not , odin will not recognize your phone anyway

install samsung usb driver first n then connect your phone with download mode by usb
Note:make sure that usb driver is install properly before connect ur phone

.
marcussmith2626 said:
you can not use kies to flash or restore firmware on galaxy y - it is not supported and kies is just not needed
if you have installed the usb drivers from the link in my thread (in compatibility mode if on windows 8/8.1) - are using a working usb cable rear usb ports on pc and correct split firmware from my thread it will work
unless you have a faulty usb port/cable it will be due to user error
Click to expand...
Click to collapse
i did it.. install the usb drivers from the link in your thread(win 8.1), put cable in rear sub port.. but still no working.... i give up

!!
GalKill said:
Are you boot into download mode already? If not , odin will not recognize your phone anyway
Click to expand...
Click to collapse
of course

@@
before that, i installed ROM cm7.2 with Kernel [email protected]#2. but it fail and can't boot. recovery also no

gemnett said:
i did it.. install the usb drivers from the link in your thread(win 8.1), put cable in rear sub port.. but still no working.... i give up
Click to expand...
Click to collapse
did you run the usb driver setup in compatibility mode?
right click the setup file
click properties
click compatibility tab
tick box to run in compatibility
select windows xp (service pack 2 will do)
apply
then run the setup
im using windows 8.1 and no problems with me

marcussmith2626 said:
did you run the usb driver setup in compatibility mode?
right click the setup file
click properties
click compatibility tab
tick box to run in compatibility
select windows xp (service pack 2 will do)
apply
then run the setup
im using windows 8.1 and no problems with me
Click to expand...
Click to collapse
i did, pack 2..but still USB Device Not Recognized, maybe my phone die. hehe. but thank you....
Ah, this is my problem: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)" :cyclops:

gemnett said:
i did, pack 2..but still USB Device Not Recognized, maybe my phone die. hehe. but thank you....
Ah, this is my problem: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)" :cyclops:
Click to expand...
Click to collapse
right click the device
click uninstall
restart the pc
then put phone into download mode
connect usb
push vol up on phone to start connection
drivers should then install

Try to use your cable connected from your pc and your phone again. If the same problem happened, try to connect your phone using that cable to another pc. BUT if that phone is not recognized, I think the problem is in the cable. Try to buy another one, and if same thing happened, the problem is in the usb port of your phone.

DiwatangTboom said:
Try to use your cable connected from your pc and your phone again. If the same problem happened, try to connect your phone using that cable to another pc. BUT if that phone is not recognized, I think the problem is in the cable. Try to buy another one, and if same thing happened, the problem is in the usb port of your phone.
Click to expand...
Click to collapse
I think so.. the problem is in the usb port of my phone... so, what i have to do ? replace?

gemnett said:
I think so.. the problem is in the usb port of my phone... so, what i have to do ? replace?
Click to expand...
Click to collapse
Yep.

[Q] Help ! my sm-g530h usb not recognized

I can't update firmware using odin ,it keep saying not recognized ,any other ways can i flash firmware without using usb port? Hope anyone can help me

Did you try on another pc? Test it, maybe your pc is the one with the problem.
you can flash with out pc, sadly there are none rom at the moment to flash trough recovery.

syverman said:
Did you try on another pc? Test it, maybe your pc is the one with the problem.
you can flash with out pc, sadly there are none rom at the moment to flash trough recovery.
Click to expand...
Click to collapse
i have try many cable, computer but its still same. its just charging on the phone and not recognized on pc. im stuck on unofficial miui with a lot of bugs, please give me someways to stock my firmware back without using odin or anything that use usb port because my usb port its just for charging only, not working for odin.

Rith click on computer and click on comlutef propeeties then ect device manager u will use warning icon in the list something name i am forget right click on it u will use option update driver click on it then select specific driver path where your driver are installed then search then Huh Huh xD restert your pc then connect your phone:good:

I think problem is with drivers you need reinstall device drivers, first uninstall ur device drivers from device manager then install samsung usb driver software from here ,now drivers will be installed automatically installed on connecting your phone
Download link is below
http://androidhost.org/XIVsA
Sent from my SM-G530H using XDA Free mobile app

my SM-G530H connected and detected in windows but not on samsung kies

Samsung Galaxy Grand Prime SM-G530/H/DV model (G530HXXU1ANIA)
Hi
I have Samsung Galaxy Grand Prime SM-G530/H/DV model (G530HXXU1ANIA) . I did factory Reset . Then TouchWiz stopped problem arose. I disabled TouchWiz and installed APUS Launcher. That worked fine. Then I want to give cell to another person. I did Factory Reset again. After this the following problems arose.
1- A pop up massage during booting arose. “Unfortunately Process com. Android. systemUI has been stopped”
2- Above mentioned message hang the cell on Main Screen, I can not operate any function.
3- IMEI No. INVALID.
4- Mobile cannot be accepted connection with PC, ODIN, Kies etc.
Kindly guide me in this regard as I am a beginner in the matter of programming etc.
M.Abdul Quddus from Pakistan
+923006021721

Did you get this sorted out and how ? I have a similar problem.
Sent from my SM-G530H using XDA Forums

redfeast said:
I think problem is with drivers you need reinstall device drivers, first uninstall ur device drivers from device manager then install samsung usb driver software from here ,now drivers will be installed automatically installed on connecting your phone
Download link is below
http://androidhost.org/XIVsA
Click to expand...
Click to collapse
I doubt it is a driver issue because I have tried multiple systems and these systems recognize other phones instantly

its the same from my phone sadly i didnt find any firmware for this its a clone i think