After the unsuccessful firmware, for some reason the frp got locked, the firmware does not boot with an error [Func NO: 11 (recovery image) Error NO: 2 (loading failed!)] And recovery with the same error, dload also doesnt boot. Is there a chance to revive?
You can use a paid service like HCU which is made by DC Unlocker team
Related
hi, was trying to uninstall SuperSu and got stuck in Rescue mode Loop,
Phone is Huawei P8, GRA-L09, B151, EMUI 3.1
error message is as follows:
Error!
Func NO : 10 (boot image)
Error NO : 2 (load failed!)
read a page to do a factory reset which ended up formatting my internal storage and still didn't help me.
TWRP can still be accessed when(Vol Up + Power Button are held)
Please help me:crying:
Tried fastboot flash boot boot.img? (Where boot.img is your original boot.img backup you took before rooting etc)
Sent from my HUAWEI GRA-L09
Yesterday, I tried to use the HWOTA method on my P10+ while it's on oreo. I used the script method and it spew out some error and my phone proceeds to reboot and get's stuck on "your phone is booting now". I tried to let the phone discharge and when it got fully discharged I charged it again hoping I could open twrp and it did not but instead booted up and showed an error
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
I tried using the huaweiextractor and extraced ramdisk and kernel images but the phone won't boot to recovery mode.
Need help guys.
Hi Guys,
I have Honor 8 Lite (PRA-LA1C185B165). I was on elite Rom 7.1 and just thought to restore my phone to original by the backup I took when installed Hassan's EliteRom. After restoring, phone booted normally, and then I resorted stock recovery. Phone now booted normally and then I relocked the bootloader after getting bootloader code from Huawei website. Now the phone booted but it just went into please update system error. Error! Func NO : 11 (reovery image) Error NO : 2 (load failed!). I discharged battery and now phone is booted into fastboot mode. Now it shows Fastboot & rescue Mode. Phone Relocked, FRP unlock, rescue mode enter... I tried adb devices, it shows blank devices... Plz anyone can help what to do?
Unlock your bootloader by using fastboot oem unlock XXXXXXXXXXXXXXXXXXXXXXXXX ( where X insert huawei code)
Thanks, did this and I have to go at lengths to again install twrp and then I was able to boot normally...Thanks...........One question could you plz guide how can I get this phone to original, i.e., unlocked bootloader and stock recovery... till now I have been unable to find stock recovery and official firmware for this model, PRA-LA1C185B165
I've posted something similar before but now I'm in another situation.
Huawei p10 lite WAS-LX1C432 only boots into error mode with errors: Func no: 14 (iom3 image) error no: 1 (verify failed)
This happened after I messed up Rom installation (https://forum.xda-developers.com/showthread.php?t=3801717) I recovered the dark screen with DC. And now my screen was working again. I could either go into fastboot or error mode. So in fast boot it said that my Frp was locked so I went ahead in hcu and unlocked it. Now I don't have access to even fastboot through the button combination always boots straight to error mode with the errors listed above.
But someone told me that I can use hcu client and that it can do its thing even without fastboot is that true?
How did you recover from black screen? What's DC?
ExTile2 said:
I've posted something similar before but now I'm in another situation.
Huawei p10 lite WAS-LX1C432 only boots into error mode with errors: Func no: 14 (iom3 image) error no: 1 (verify failed)
This happened after I messed up Rom installation (https://forum.xda-developers.com/showthread.php?t=3801717) I recovered the dark screen with DC. And now my screen was working again. I could either go into fastboot or error mode. So in fast boot it said that my Frp was locked so I went ahead in hcu and unlocked it. Now I don't have access to even fastboot through the button combination always boots straight to error mode with the errors listed above.
But someone told me that I can use hcu client and that it can do its thing even without fastboot is that true?
Click to expand...
Click to collapse
Do you solved? same, usinf octopu huawei tool
Hello guys.
I tried to update my P10 lite with dload method, the update started and finished normal.
When the phone restarted it entered in error mode.
Code:
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11(recovery image)
Error NO: 2(load failed)
I can enter in fastboot but not in erecovery.
WAS-LX1A
Firmware : WAS-LX1AC432B123
Bootloader: Locked (i don't have the key)
Any idea ?
nickxab said:
Hello guys.
I tried to update my P10 lite with dload method, the update started and finished normal.
When the phone restarted it entered in error mode.
Code:
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11(recovery image)
Error NO: 2(load failed)
I can enter in fastboot but not in erecovery.
WAS-LX1A
Firmware : WAS-LX1AC432B123
Bootloader: Locked (i don't have the key)
Any idea ?
Click to expand...
Click to collapse
I suggest you to use the HWOTA8 method, you might unlock the bootloader.
nickxab said:
Hello guys.
I tried to update my P10 lite with dload method, the update started and finished normal.
When the phone restarted it entered in error mode.
Code:
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11(recovery image)
Error NO: 2(load failed)
I can enter in fastboot but not in erecovery.
WAS-LX1A
Firmware : WAS-LX1AC432B123
Bootloader: Locked (i don't have the key)
Any idea ?
Click to expand...
Click to collapse
If u don't have bootloader code u can't unlock it for free...