I've posted something similar before but now I'm in another situation.
Huawei p10 lite WAS-LX1C432 only boots into error mode with errors: Func no: 14 (iom3 image) error no: 1 (verify failed)
This happened after I messed up Rom installation (https://forum.xda-developers.com/showthread.php?t=3801717) I recovered the dark screen with DC. And now my screen was working again. I could either go into fastboot or error mode. So in fast boot it said that my Frp was locked so I went ahead in hcu and unlocked it. Now I don't have access to even fastboot through the button combination always boots straight to error mode with the errors listed above.
But someone told me that I can use hcu client and that it can do its thing even without fastboot is that true?
How did you recover from black screen? What's DC?
ExTile2 said:
I've posted something similar before but now I'm in another situation.
Huawei p10 lite WAS-LX1C432 only boots into error mode with errors: Func no: 14 (iom3 image) error no: 1 (verify failed)
This happened after I messed up Rom installation (https://forum.xda-developers.com/showthread.php?t=3801717) I recovered the dark screen with DC. And now my screen was working again. I could either go into fastboot or error mode. So in fast boot it said that my Frp was locked so I went ahead in hcu and unlocked it. Now I don't have access to even fastboot through the button combination always boots straight to error mode with the errors listed above.
But someone told me that I can use hcu client and that it can do its thing even without fastboot is that true?
Click to expand...
Click to collapse
Do you solved? same, usinf octopu huawei tool
Related
my phone boot only in this screen mode http://imgur.com/a/rMcO7. this is not my pic but error is: error mode attention. please update system again. error. func no 14 (iom3 image) error no: 1 (security verify failed).
What can I do to revive my phone. not working fastboot, bootloader, dload method to force flash of rom ecc... THx
I've similar situation..i'm not able to flash any kind of image..
Wire1122 said:
my phone boot only in this screen mode http://imgur.com/a/rMcO7. this is not my pic but error is: error mode attention. please update system again. error. func no 14 (iom3 image) error no: 1 (security verify failed).
What can I do to revive my phone. not working fastboot, bootloader, dload method to force flash of rom ecc... THx
Click to expand...
Click to collapse
Friend, if you want to re-cover phone, do this steps.
1. Connect your phone to PC and fast press volume down and power button (phone needs to be off)
2. You will be now on Bootloader & rescue mode.
Now you search for mega Thread and there will be unbricking section! UW!
RootingPro-18 said:
Friend, if you want to re-cover phone, do this steps.
1. Connect your phone to PC and fast press volume down and power button (phone needs to be off)
2. You will be now on Bootloader & rescue mode.
Now you search for mega Thread and there will be unbricking section! UW!
Click to expand...
Click to collapse
Thancks, but my phone is already in huawei assistance.
oh, I think I could not get out of this situation without paying.
i am normally vns-l31c432 and i went a vec oeminfo from p10 lite was-lx1c432.
all went well except that I forgot to check out developer mode oem unlock.
i went to twrp to use the terminal.
and it broke.
it is blocked in a bootloop in fastboot-bootloader mode.
error (NO): error (NO): error (no security)
I managed to go fastboot mode, but frp lock. ahhhhh !!!
I think I have to use dc-phoenix, obliged.
because there is no roolback for p10 lite.
good, it is repaired,
I could not, go back to recovery mode twrp because frp lock. and it always restarts in error mode.
after, several long minutes of tested.
I do not know why, but it is repaired.
so i tried to load the roolback for l31, but i forgot to disconnect the cable, pressed on the three buttons, and it went to twrp. (flash c432oeminfo, power off, dload c432b160)
in this regard, in the meantime, I went to open an account in dcpoenix with 15 credits, which I did not use.
Yesterday, I tried to use the HWOTA method on my P10+ while it's on oreo. I used the script method and it spew out some error and my phone proceeds to reboot and get's stuck on "your phone is booting now". I tried to let the phone discharge and when it got fully discharged I charged it again hoping I could open twrp and it did not but instead booted up and showed an error
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
I tried using the huaweiextractor and extraced ramdisk and kernel images but the phone won't boot to recovery mode.
Need help guys.
Hi Guys,
I have Honor 8 Lite (PRA-LA1C185B165). I was on elite Rom 7.1 and just thought to restore my phone to original by the backup I took when installed Hassan's EliteRom. After restoring, phone booted normally, and then I resorted stock recovery. Phone now booted normally and then I relocked the bootloader after getting bootloader code from Huawei website. Now the phone booted but it just went into please update system error. Error! Func NO : 11 (reovery image) Error NO : 2 (load failed!). I discharged battery and now phone is booted into fastboot mode. Now it shows Fastboot & rescue Mode. Phone Relocked, FRP unlock, rescue mode enter... I tried adb devices, it shows blank devices... Plz anyone can help what to do?
Unlock your bootloader by using fastboot oem unlock XXXXXXXXXXXXXXXXXXXXXXXXX ( where X insert huawei code)
Thanks, did this and I have to go at lengths to again install twrp and then I was able to boot normally...Thanks...........One question could you plz guide how can I get this phone to original, i.e., unlocked bootloader and stock recovery... till now I have been unable to find stock recovery and official firmware for this model, PRA-LA1C185B165
After the unsuccessful firmware, for some reason the frp got locked, the firmware does not boot with an error [Func NO: 11 (recovery image) Error NO: 2 (loading failed!)] And recovery with the same error, dload also doesnt boot. Is there a chance to revive?
You can use a paid service like HCU which is made by DC Unlocker team