oh, I think I could not get out of this situation without paying.
i am normally vns-l31c432 and i went a vec oeminfo from p10 lite was-lx1c432.
all went well except that I forgot to check out developer mode oem unlock.
i went to twrp to use the terminal.
and it broke.
it is blocked in a bootloop in fastboot-bootloader mode.
error (NO): error (NO): error (no security)
I managed to go fastboot mode, but frp lock. ahhhhh !!!
I think I have to use dc-phoenix, obliged.
because there is no roolback for p10 lite.
good, it is repaired,
I could not, go back to recovery mode twrp because frp lock. and it always restarts in error mode.
after, several long minutes of tested.
I do not know why, but it is repaired.
so i tried to load the roolback for l31, but i forgot to disconnect the cable, pressed on the three buttons, and it went to twrp. (flash c432oeminfo, power off, dload c432b160)
in this regard, in the meantime, I went to open an account in dcpoenix with 15 credits, which I did not use.
Related
Hello,
I own a Huawei P8 L09, bootloader unlocked, rooted and with TWRP recovery.
I tried this morning to flash a new rom using TWRP recovery.
Problem is that I do believe I wiped to many partitions and I ended up with a bootloop.
I could at first access 3 times the emui erecovery (btw, Wifi recovery failed) but not anymore (is it related to the battery level ? I don't know how much I still have)
Following a lot of threads here and on some other forums (I've been searching now for approx. 7 hours...) :
I downloaded a update stock ROM (B170 something), I extracted Boot, System, Recovery and Cust
I entered bootloader mode (it's the only mode I can go to; recovery No, Download mode neither)
and on my computer I typed in the cmd "fastboot flash recovery recovery.img" same with system, cust and boot.
All of them said "Okay" but the bootloop is still there and I can't acess any other mode or shut the device off.
Also, my bootloader indicate that i'm "unlocked" but when I try to do something as :
"fastboot erase cache" it says "remote: not allowed" or something like that.
I tried the SD card flash method but I can't even acess the 3-button mode (doesn't work - bootloop again).
Finally, I've got 2 questions :
1) Is there a solution ? Is there/was there anybody in the same situation ?
2) Does the battery level influence wether I may or not enter any mode ? like b.e. under 30% I can't access recovery or something like that ?
Thanks in advance for your help and sorry for my bad english.
Greetings from Belgium !
Jules
Hi!
I have the same situation as you do, All i know is that you can access the eRecovery only if you're plugged in.
But it's completely useless. Have you found any solutions yet?
Edit:
i struggled and i'm still struggling but i figured out that I need the recovery and boot img of the version i was on previously. In my case that is B350.
The main mirror is down but i managed to find another one: https://mega.nz/#!NAcgQY7Y!I4eRfkaq62J31csv_wZ8_nTzmUbWPX71JUicDysjus8
after flashing them i was able to partially flash (using vol+-&pwr) B170 (it only went up to 90% with my USB attached, fails without USB)
At my surprise it booted B170 even if it didn't complete, however right now it keeps rebooting every minute. I'll update if i manage to fix this
I have the same problem as you both. To flash boot.img and other files by fastboot we need to unlock bootloader. To unlock bootloader we need to have Imei, Product Id and SN, but I can't read it because phone won't turn on.
Anyone know how to get this info?
you can read these info from the packaging box!
I managed to fix my issues (i believe) by continuously flashing and flashing versions. I never really managed to fully OTA update to 100% due to some "CUST error" but from B350 i managed to "update" to B170, then to B200, then to B321a.
Now i just installed TWRP and rooted it and on the process of installing xposed (if possible).
I wasted a good 6-7 hours on everything already
Well now I actually sent my phone in repair, given that it still was under warranty.
If they return it unrepeared, i will try it your way, Nikooo777. Thanks.
TukAliveFra said:
Well now I actually sent my phone in repair, given that it still was under warranty.
If they return it unrepeared, i will try it your way, Nikooo777. Thanks.
Click to expand...
Click to collapse
you gonna pay for the repair..
Hi!
Got a problem, need to send my p9 lite to service bc it fell with me into water. it still works, but I assume a chip is frozen because neither the wifi nor bluetooth can be turned on. I'm afraid theyre not fixing my problem because I unlocked it.
I flashed twrp recovery, rooted, but already flashed the stock rom and unroot again.
When I tried to relock with adb and bootloader code, I got the error code root risk is too high
Tried to install other stock roms again and a lot of stuff, but none of it worked. So I tried to relock via dc-unlocker. com but didnt work. But now it says when I restart "your device has failed verification and may not work properly." instead of "Your device has been unlocked and can't be trusted." and when I tried to use adb to relock with the bootloader code it says "remote: stat not match" ~ got a new bootloader code??
I'm desperate, can anyone help me?
put update.app into dload folder in micro sd card and try 3 button method.
hey i have just the same problem and when i try the 3 button method i get the error software install failed.
but i have no revolution twrp any more and i think also no erecovery beacuse i cant do a factory reset when i tried to enter erecovery with power button , volume + button then i go automatic to software update and at the 5% i get the error software install failed i hope some body get a solution to fix my phone without dc-unlocker
ps i was on android nougat but i think there any os now because the phone dont boot sorry for my bad english hahah
Hi Guys,
I have Honor 8 Lite (PRA-LA1C185B165). I was on elite Rom 7.1 and just thought to restore my phone to original by the backup I took when installed Hassan's EliteRom. After restoring, phone booted normally, and then I resorted stock recovery. Phone now booted normally and then I relocked the bootloader after getting bootloader code from Huawei website. Now the phone booted but it just went into please update system error. Error! Func NO : 11 (reovery image) Error NO : 2 (load failed!). I discharged battery and now phone is booted into fastboot mode. Now it shows Fastboot & rescue Mode. Phone Relocked, FRP unlock, rescue mode enter... I tried adb devices, it shows blank devices... Plz anyone can help what to do?
Unlock your bootloader by using fastboot oem unlock XXXXXXXXXXXXXXXXXXXXXXXXX ( where X insert huawei code)
Thanks, did this and I have to go at lengths to again install twrp and then I was able to boot normally...Thanks...........One question could you plz guide how can I get this phone to original, i.e., unlocked bootloader and stock recovery... till now I have been unable to find stock recovery and official firmware for this model, PRA-LA1C185B165
I've posted something similar before but now I'm in another situation.
Huawei p10 lite WAS-LX1C432 only boots into error mode with errors: Func no: 14 (iom3 image) error no: 1 (verify failed)
This happened after I messed up Rom installation (https://forum.xda-developers.com/showthread.php?t=3801717) I recovered the dark screen with DC. And now my screen was working again. I could either go into fastboot or error mode. So in fast boot it said that my Frp was locked so I went ahead in hcu and unlocked it. Now I don't have access to even fastboot through the button combination always boots straight to error mode with the errors listed above.
But someone told me that I can use hcu client and that it can do its thing even without fastboot is that true?
How did you recover from black screen? What's DC?
ExTile2 said:
I've posted something similar before but now I'm in another situation.
Huawei p10 lite WAS-LX1C432 only boots into error mode with errors: Func no: 14 (iom3 image) error no: 1 (verify failed)
This happened after I messed up Rom installation (https://forum.xda-developers.com/showthread.php?t=3801717) I recovered the dark screen with DC. And now my screen was working again. I could either go into fastboot or error mode. So in fast boot it said that my Frp was locked so I went ahead in hcu and unlocked it. Now I don't have access to even fastboot through the button combination always boots straight to error mode with the errors listed above.
But someone told me that I can use hcu client and that it can do its thing even without fastboot is that true?
Click to expand...
Click to collapse
Do you solved? same, usinf octopu huawei tool
I've been trying to update my phone to emui 5.0, every time it just says update failed. I also tried to flash custom roms through twrp, which always make my build number to something about test-keys. Maybe I'm just to dum. I wiped the system and tried again, but when booted to fastboot it says locked bootloader(it isn't what I want) so I unlocked the bootloader. Now it somehow only boots into the error mode: NO11(recovery image) and NO2(load failed).
I tried button combinations, it just keeps booting to error mode(I also read through other threads, but the solutions like waiting till the phone dies, than press volume - and connect to pc didn't work).
PLEAEAEAS Help!!!