Accidentally messed my phone up - Huawei P10 Plus Questions & Answers

Yesterday, I tried to use the HWOTA method on my P10+ while it's on oreo. I used the script method and it spew out some error and my phone proceeds to reboot and get's stuck on "your phone is booting now". I tried to let the phone discharge and when it got fully discharged I charged it again hoping I could open twrp and it did not but instead booted up and showed an error
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
I tried using the huaweiextractor and extraced ramdisk and kernel images but the phone won't boot to recovery mode.
Need help guys.

Related

Huawei P8 B151 stuck in Rescue Mode loop.

hi, was trying to uninstall SuperSu and got stuck in Rescue mode Loop,
Phone is Huawei P8, GRA-L09, B151, EMUI 3.1
error message is as follows:
Error!
Func NO : 10 (boot image)
Error NO : 2 (load failed!)
read a page to do a factory reset which ended up formatting my internal storage and still didn't help me.
TWRP can still be accessed when(Vol Up + Power Button are held)
Please help me:crying:
Tried fastboot flash boot boot.img? (Where boot.img is your original boot.img backup you took before rooting etc)
Sent from my HUAWEI GRA-L09

Is there a way to get my phone back to normal? Please help...

Hi! Please don´t judge me for the stupid **** I have done with my mobile although I probably deserved it lol. Its started with completely wiping my phone through TWRP, then I accidentaly replaced the boot and recovery modes, so now everytime I turn on my mobile it says:
RESCUE MODE!
Attention! Please update system again
Error!
Func NO : 6 (modern image!
Error NO : 3 (load failed in recoveryboot mode!)
Please anyone, is there a way I can fix it??
XCube591 said:
Hi! Please don´t judge me for the stupid **** I have done with my mobile although I probably deserved it lol. Its started with completely wiping my phone through TWRP, then I accidentaly replaced the boot and recovery modes, so now everytime I turn on my mobile it says:
RESCUE MODE!
Attention! Please update system again
Error!
Func NO : 6 (modern image!
Error NO : 3 (load failed in recoveryboot mode!)
Please anyone, is there a way I can fix it??
Click to expand...
Click to collapse
Friend, if you want to re-cover phone, do this steps.
1. Connect your phone to PC and fast press volume down and power button (phone needs to be off)
2. You will be now on Bootloader & rescue mode.
3. Get boot.IMG, Recovery.img system.img and flash it (fastboot flash boot boot.img and everything like so)
4. reboot

Another P10 Plus Bricked after Oreo.

Hello guys,
ive been trying since friday to Downgrade from Oreo to Nougat, in the proces my phone got bricked.
ive followed this steps:
https://forum.xda-developers.com/p10/help/oreo-boot-image-bricked-t3744809
https://forum.xda-developers.com/p10/how-to/guide-to-rollback-huawei-p10-oreo-to-t3735156
https://forum.xda-developers.com/p10-plus/help/help-p10-bricked-t3754984
(reference) https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
I use the VKY-L29C432B185 firmware for rollback, adding it to the HWOTA8 folder in my sdcard, after flashing, the phone stays in error:
Error!
Func NO : 10 (boot image)
Error No : 2 (load failed)
if i tried to go to recovery via vol Up + power then got
Func No : 11 ( recovery image)
Error No: 2 ( load failed)
After this, ive unzipped and unpacked the update.app from oreo, and install ramdisk.img, recovery_ramdisk.img and kernel.img and the error dissapears, after that i install again twrp and try. but no success.
I can access to Fastboot, and i can flash via fastboot twrp and stock recovery (via fastboot flash recovery_ramdisk imgfile.img),
Has anyone faced this problem as well?
Oh my god! i think that ive fixed the phone! here is what ive done so far:
First of all, i was stuck in Error mode:
Error!
Func NO : 10 (boot image)
Error No : 2 (load failed)
if i tried to go to recovery via vol Up + power then got
Func No : 11 ( recovery image)
Error No: 2 ( load failed)
In order to clean that up, you have to unpack an update.app from oreo, flash kernel.img and recovery_ramdisk.img
From this, you can access to the stock recovery, also you can flash twrp and boot from it again.
After completing this, here is the fun part:
1. Download Oreo Again VKY-L29C432B360 and rename the files (you know.)
2.Using HWOTA8, copy the files from VKY-L29C432B360 to HWOTA8 on a SDCard, with hwota8_update.zip and MHA_RECOVERY8_NoCheck.img and insert it to the phone
3. Install TWRP using the Replace_Recovery.bat
4. Boot from TWRP, and install zip hwota8_update.zip.
5. The phone will reboot and show the same error Func No : 11 ( recovery image) DONT PANIC.
6. Power off the phone, and quickly press the Vol - button and plug the usb cable to enter fastboot.
7. Flash the recovery found in HWOTA8 file from your pc: fastboot flash recovery_ramdisk MHA_RECOVERY8_NoCheck.img.
8. Power Off your device, and quickly boot to Recovery (the stock one, that we just flashed)
9. The install process (Started in TWRP) WILL CONTINUE!!!.
10. Your phone boots again in android Oreo B360 (but with locked bootloader in my case)
I hope it helps! i almost purshase the unbrick from FunkyHuawei... $50.00!
Greetings!

No fastboot no recovery nothing

I've posted something similar before but now I'm in another situation.
Huawei p10 lite WAS-LX1C432 only boots into error mode with errors: Func no: 14 (iom3 image) error no: 1 (verify failed)
This happened after I messed up Rom installation (https://forum.xda-developers.com/showthread.php?t=3801717) I recovered the dark screen with DC. And now my screen was working again. I could either go into fastboot or error mode. So in fast boot it said that my Frp was locked so I went ahead in hcu and unlocked it. Now I don't have access to even fastboot through the button combination always boots straight to error mode with the errors listed above.
But someone told me that I can use hcu client and that it can do its thing even without fastboot is that true?
How did you recover from black screen? What's DC?
ExTile2 said:
I've posted something similar before but now I'm in another situation.
Huawei p10 lite WAS-LX1C432 only boots into error mode with errors: Func no: 14 (iom3 image) error no: 1 (verify failed)
This happened after I messed up Rom installation (https://forum.xda-developers.com/showthread.php?t=3801717) I recovered the dark screen with DC. And now my screen was working again. I could either go into fastboot or error mode. So in fast boot it said that my Frp was locked so I went ahead in hcu and unlocked it. Now I don't have access to even fastboot through the button combination always boots straight to error mode with the errors listed above.
But someone told me that I can use hcu client and that it can do its thing even without fastboot is that true?
Click to expand...
Click to collapse
Do you solved? same, usinf octopu huawei tool

Bricked P10 Lite, Please help

Hello guys.
I tried to update my P10 lite with dload method, the update started and finished normal.
When the phone restarted it entered in error mode.
Code:
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11(recovery image)
Error NO: 2(load failed)
I can enter in fastboot but not in erecovery.
WAS-LX1A
Firmware : WAS-LX1AC432B123
Bootloader: Locked (i don't have the key)
Any idea ?
nickxab said:
Hello guys.
I tried to update my P10 lite with dload method, the update started and finished normal.
When the phone restarted it entered in error mode.
Code:
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11(recovery image)
Error NO: 2(load failed)
I can enter in fastboot but not in erecovery.
WAS-LX1A
Firmware : WAS-LX1AC432B123
Bootloader: Locked (i don't have the key)
Any idea ?
Click to expand...
Click to collapse
I suggest you to use the HWOTA8 method, you might unlock the bootloader.
nickxab said:
Hello guys.
I tried to update my P10 lite with dload method, the update started and finished normal.
When the phone restarted it entered in error mode.
Code:
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11(recovery image)
Error NO: 2(load failed)
I can enter in fastboot but not in erecovery.
WAS-LX1A
Firmware : WAS-LX1AC432B123
Bootloader: Locked (i don't have the key)
Any idea ?
Click to expand...
Click to collapse
If u don't have bootloader code u can't unlock it for free...

Categories

Resources