hi, was trying to uninstall SuperSu and got stuck in Rescue mode Loop,
Phone is Huawei P8, GRA-L09, B151, EMUI 3.1
error message is as follows:
Error!
Func NO : 10 (boot image)
Error NO : 2 (load failed!)
read a page to do a factory reset which ended up formatting my internal storage and still didn't help me.
TWRP can still be accessed when(Vol Up + Power Button are held)
Please help me:crying:
Tried fastboot flash boot boot.img? (Where boot.img is your original boot.img backup you took before rooting etc)
Sent from my HUAWEI GRA-L09
Related
Hello guys,
ive been trying since friday to Downgrade from Oreo to Nougat, in the proces my phone got bricked.
ive followed this steps:
https://forum.xda-developers.com/p10/help/oreo-boot-image-bricked-t3744809
https://forum.xda-developers.com/p10/how-to/guide-to-rollback-huawei-p10-oreo-to-t3735156
https://forum.xda-developers.com/p10-plus/help/help-p10-bricked-t3754984
(reference) https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
I use the VKY-L29C432B185 firmware for rollback, adding it to the HWOTA8 folder in my sdcard, after flashing, the phone stays in error:
Error!
Func NO : 10 (boot image)
Error No : 2 (load failed)
if i tried to go to recovery via vol Up + power then got
Func No : 11 ( recovery image)
Error No: 2 ( load failed)
After this, ive unzipped and unpacked the update.app from oreo, and install ramdisk.img, recovery_ramdisk.img and kernel.img and the error dissapears, after that i install again twrp and try. but no success.
I can access to Fastboot, and i can flash via fastboot twrp and stock recovery (via fastboot flash recovery_ramdisk imgfile.img),
Has anyone faced this problem as well?
Oh my god! i think that ive fixed the phone! here is what ive done so far:
First of all, i was stuck in Error mode:
Error!
Func NO : 10 (boot image)
Error No : 2 (load failed)
if i tried to go to recovery via vol Up + power then got
Func No : 11 ( recovery image)
Error No: 2 ( load failed)
In order to clean that up, you have to unpack an update.app from oreo, flash kernel.img and recovery_ramdisk.img
From this, you can access to the stock recovery, also you can flash twrp and boot from it again.
After completing this, here is the fun part:
1. Download Oreo Again VKY-L29C432B360 and rename the files (you know.)
2.Using HWOTA8, copy the files from VKY-L29C432B360 to HWOTA8 on a SDCard, with hwota8_update.zip and MHA_RECOVERY8_NoCheck.img and insert it to the phone
3. Install TWRP using the Replace_Recovery.bat
4. Boot from TWRP, and install zip hwota8_update.zip.
5. The phone will reboot and show the same error Func No : 11 ( recovery image) DONT PANIC.
6. Power off the phone, and quickly press the Vol - button and plug the usb cable to enter fastboot.
7. Flash the recovery found in HWOTA8 file from your pc: fastboot flash recovery_ramdisk MHA_RECOVERY8_NoCheck.img.
8. Power Off your device, and quickly boot to Recovery (the stock one, that we just flashed)
9. The install process (Started in TWRP) WILL CONTINUE!!!.
10. Your phone boots again in android Oreo B360 (but with locked bootloader in my case)
I hope it helps! i almost purshase the unbrick from FunkyHuawei... $50.00!
Greetings!
Yesterday, I tried to use the HWOTA method on my P10+ while it's on oreo. I used the script method and it spew out some error and my phone proceeds to reboot and get's stuck on "your phone is booting now". I tried to let the phone discharge and when it got fully discharged I charged it again hoping I could open twrp and it did not but instead booted up and showed an error
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
I tried using the huaweiextractor and extraced ramdisk and kernel images but the phone won't boot to recovery mode.
Need help guys.
Hello guys.
I tried to update my P10 lite with dload method, the update started and finished normal.
When the phone restarted it entered in error mode.
Code:
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11(recovery image)
Error NO: 2(load failed)
I can enter in fastboot but not in erecovery.
WAS-LX1A
Firmware : WAS-LX1AC432B123
Bootloader: Locked (i don't have the key)
Any idea ?
nickxab said:
Hello guys.
I tried to update my P10 lite with dload method, the update started and finished normal.
When the phone restarted it entered in error mode.
Code:
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11(recovery image)
Error NO: 2(load failed)
I can enter in fastboot but not in erecovery.
WAS-LX1A
Firmware : WAS-LX1AC432B123
Bootloader: Locked (i don't have the key)
Any idea ?
Click to expand...
Click to collapse
I suggest you to use the HWOTA8 method, you might unlock the bootloader.
nickxab said:
Hello guys.
I tried to update my P10 lite with dload method, the update started and finished normal.
When the phone restarted it entered in error mode.
Code:
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11(recovery image)
Error NO: 2(load failed)
I can enter in fastboot but not in erecovery.
WAS-LX1A
Firmware : WAS-LX1AC432B123
Bootloader: Locked (i don't have the key)
Any idea ?
Click to expand...
Click to collapse
If u don't have bootloader code u can't unlock it for free...
I have a Huawei P8 GRAUL00 thats stuck in recovery mode. The screen is saying:
"Attention! Please update system again" Error ! Func No: 8 (hifi image) Error No : 2 (load failed!)"
I tried upgrading the ROM by putting the update.app in the dload in the SD card to no avail.
What are my options at this point? Please help. Thank you
The phone currently has a Marshmallow 6.0.1 B399 firmware.
The phone was working just fine these past months.
My phone huawei p8 lite ALE-L21 STUCKS IN RESCUE MODE.THAT HAPPENS ,
I ROOTED MY PHONE AND I WANT TO INSTALL TWRP.SO I DOWNLOAD IMAGE FOR HUAWEI AND INSTALL AN APP FLASH RECOVERY.WHEN I CLICK OPTION UNLOCK BOOT LOADER MY PHONE ENTERS INTO FASTBOOT AND RECOVERY MODE AND IT SAYS MY PHONE WAS UNLOCKED. THEN I CLICK AN ANOTHER OPTION AND IT TURNS MY PHONE INTO STUCK. MY PHONE WAS PERFECTLY WORKING BEFORE AND ONLY A CLICK CHANGED IT ALL.. ON MY SCREEN IT SAYS
Error!
Func No:10(boot image)
Error No:2(boot image failed in normalboot mode)
Attention!
Please update your system again.
Update user guide :
Zh.ui.vmall.com/emotiondownload.php?mod=restore
WHAT DID I DO??
I GO TO MANY REPAIRING CENTERS AND THEY CANT DO THIS..
PLEASE HELP ME....PLEASE....THE KEYS (VOLUME AND POWER IS BOTH NOT WORKING.BUT I CAN REPAIR IT).
I HAVE A LAPTOP.SO GIVE ME ADVICES I CAN DO IT..
IMHO you unrecoverably bricked the phone, otherwise the repair centers you contacted could have helped.