Database Users

My First Droid Razr M Experience

I got a Droid Razr M for an upgrade, Worked great so i rooted it, Still worked great all that day, then i went to sleep and when i woke and the WiFi would not work!
The toggle switch turned a darker gray, When i tap it it turns on then in a split second turns back off.
I have done a Factory Data Reset and then i did a hard reset and then i wiped the hole thing out and re flashed it to its original state. Still would not work!
So as a last resort contact Motorola for support and they tell me that i had rooted my device and there is nothing they can do. I didn't say anything about rooting it so they must be logging all users data. (Invasion of Privacy?)
So i am back here again, Not being able to use WiFi, On a 2GB/M plan. f%$king peace of $#!+.
Nothing else is bad! Its just the wifi!?

SaturnsVoid said:
I got a Droid Razr M for an upgrade, Worked great so i rooted it, Still worked great all that day, then i went to sleep and when i woke and the WiFi would not work!
The toggle switch turned a darker gray, When i tap it it turns on then in a split second turns back off.
I have done a Factory Data Reset and then i did a hard reset and then i wiped the hole thing out and re flashed it to its original state. Still would not work!
So as a last resort contact Motorola for support and they tell me that i had rooted my device and there is nothing they can do. I didn't say anything about rooting it so they must be logging all users data. (Invasion of Privacy?)
So i am back here again, Not being able to use WiFi, On a 2GB/M plan. f%$king peace of $#!+.
Nothing else is bad! Its just the wifi!?
Click to expand...
Click to collapse
It is probably your fault. A broken radio is your burden why do you think they do not want you rooting? The radio partition can get borked very easily. You need to renew it.
Do my restore. See my signature

aviwdoowks said:
It is probably your fault. A broken radio is your burden why do you think they do not want you rooting? The radio partition can get borked very easily. You need to renew it.
Do my restore. See my signature
Click to expand...
Click to collapse
your hole thread is too big for me, Could you PM me the steps i need to take? I can't figure out you what i need to do in the thread

SaturnsVoid said:
your hole thread is too big for me, Could you PM me the steps i need to take? I can't figure out you what i need to do in the thread
Click to expand...
Click to collapse
Are you unlocked? (Bootloader?)

the auzess
aviwdoowks said:
Are you unlocked? (Bootloader?)
Click to expand...
Click to collapse
Yes, Its Unlocked. I need to get it fixed.

SaturnsVoid said:
Yes, Its Unlocked. I need to get it fixed.
Click to expand...
Click to collapse
There is a lot of verbal running on there but few steps. Read the rsd tutorial & get rsd to see the phone while you have the phone in bootloader - fastboot. Then stop & check in here again....
---------- Post added at 06:35 PM ---------- Previous post was at 06:34 PM ----------
Also DL the full version xml.

aviwdoowks said:
There is a lot of verbal running on there but few steps. Read the rsd tutorial & get rsd to see the phone while you have the phone in bootloader - fastboot. Then stop & check in here again....
---------- Post added at 06:35 PM ---------- Previous post was at 06:34 PM ----------
Also DL the full version xml.
Click to expand...
Click to collapse
Well i have the phone in Fastboot, I don't know where to get the full version XML file

SaturnsVoid said:
Yes, Its Unlocked. I need to get it fixed.
Click to expand...
Click to collapse
SaturnsVoid said:
Well i have the phone in Fastboot, I don't know where to get the full version XML file
Click to expand...
Click to collapse
You must read my OP!
The link is the last thing there.

aviwdoowks said:
You must read my OP!
The link is the last thing there.
Click to expand...
Click to collapse
Well i downloaded the last link (VZW_XT907-4.1.2-9.8.1Q-66_1FF.XML.ZIP) and had RSD try and Flash it while it was in Fastboot mode... It failed saying "6/19 flash tz "tz.mbn" -> Phone returned FAIL."
Did i do something wrong?

SaturnsVoid said:
Well i downloaded the last link (VZW_XT907-4.1.2-9.8.1Q-66_1FF.XML.ZIP) and had RSD try and Flash it while it was in Fastboot mode... It failed saying "6/19 flash tz "tz.mbn" -> Phone returned FAIL."
Did i do something wrong?
Click to expand...
Click to collapse
That is the err you would get if your boot was locked.
Edit FOLLOW the OP!!
You downloaded THE WRONG XML!!!#$#&
---------- Post added at 07:14 PM ---------- Previous post was at 07:03 PM ----------
You need VRZ_XT907_9.8.1Q-78-1_1FF.xml.zip
& then paste the mod into it!!!
OR
THE FULL ver.

aviwdoowks said:
That is the err you would get if your boot was locked.
Edit FOLLOW the OP!!
You downloaded THE WRONG XML!!!#$#&
---------- Post added at 07:14 PM ---------- Previous post was at 07:03 PM ----------
You need VRZ_XT907_9.8.1Q-78-1_1FF.xml.zip
& then paste the mod into it!!!
OR
THE FULL ver.
Click to expand...
Click to collapse
Well i am download that, But my phone is LOCKED... I can get root still but i dont know about unlocking... You know anything?

SaturnsVoid said:
Well i am download that, But my phone is LOCKED... I can get root still but i dont know about unlocking... You know anything?
Click to expand...
Click to collapse
Gen. Forum: root method work around.... look for my op.
---------- Post added at 07:27 PM ---------- Previous post was at 07:23 PM ----------
I think you can follow the prev rzr method but it is a method similar to mine but for locked BL @ 600 + mb . Not just the new motochopper.

aviwdoowks said:
Gen. Forum: root method work around.... look for my op.
---------- Post added at 07:27 PM ---------- Previous post was at 07:23 PM ----------
I think you can follow the prev rzr method but it is a method similar to mine but for locked BL @ 600 + mb . Not just the new motochopper.
Click to expand...
Click to collapse
Well i did that all, Still does not work... I don't understand!?

SaturnsVoid said:
Well i did that all, Still does not work... I don't understand!?
Click to expand...
Click to collapse
You did the rzr forum method? Get help there, I do not support locked phones.
---------- Post added at 09:08 PM ---------- Previous post was at 08:32 PM ----------
Basically can you just do a rsd restore then use the new motochopper? Can someone chime in to confirm?
For a locked phone?

I just realized you never went to my restore thread. That explains your confusion. It's link is in the middle of my goodies page. I put it in my signature now.
http://forum.xda-developers.com/showthread.php?t=2391641

Ok, SaturnsVoid... so, first, sorry to hear about the problem. Motorola/VZ is giving you BS... rooting won't break your WiFi unless you did something or installed something that would...
What's your current system version?
Have you taken any OTAs since you had it? If not, you may still be able to unlock.
Also, may want to try using WiFi Connection Fixer on the Play Store (requires root...)
If those don't work, try PMing me... I can help you work it out...

U Firmware Step By Step

Would Anyone Like To Post Detailed Instructions On How To Flash The "U FIRMWARE"? .. Also (if possible) could someone include all the necessary files & give any details on the firmware (i.e. Pros or Cons).. I've seen it mentioned in a few other threads, with some people making claims that it's much smoother, also the root is more stable on that firmware. But I can't seem to find a dedicated thread on it. So if there's one out there post the link or feel free to comment instructions, any useful instructions will be added to the OP

geor9iaboy said:
Would Anyone Like To Post Detailed Instructions On How To Flash The "U FIRMWARE"? .. Also (if possible) could someone include all the necessary files & give any details on the firmware (i.e. Pros or Cons).. I've seen it mentioned in a few other threads, with some people making claims that it's much smoother, also the root is more stable on that firmware. But I can't seem to find a dedicated thread on it. So if there's one out there post the link or feel free to comment instructions, any useful instructions will be added to the OP
Click to expand...
Click to collapse
Hi, here's something from our friends with a Verizon s7 edge, they've written a step by step on how to flash the U firmware and what to do afterwards. What You and us t-mobile users need to flash is SM- G935U (TMO region) firmware which u can find on sammobile.com. Please read the instructions carefully and best of luck with flashing. Cheers!
http://forum.xda-developers.com/ver...de-flashing-sm-935u-firmware-verizon-t3415145

Magnifik81 said:
...What You and us t-mobile users need to flash is SM- G935U (TMO region) firmware which u can find on sammobile.com. ...[/url]
Click to expand...
Click to collapse
Mine is model SM-G35T, would the T-Mobile USA version of SM-G935U still work with mine?
Thank you.

Namuna said:
Mine is model SM-G35T, would the T-Mobile USA version of SM-G935U still work with mine?
Thank you.
Click to expand...
Click to collapse
Yeah it will but you need to find the right one on sammobile. The one for G9535T TMO region next to itself. The the rest of the procedure is the same as described in the post i shared. I will it leave it to you to do some research on your own and find the right files. Cheers!

Hey all, best place for U firmware is THEANDROIDSOUL.COM . they also have all other Samsung firmwares. So good flashing

Does it require root to flash U on the tmo variant?
Does it trip Knox?
Thanks

whittikins said:
Does it require root to flash U on the tmo variant?
Does it trip Knox?
Thanks
Click to expand...
Click to collapse
Dont need root and won't trip Knox
Sent from my SM-G935U using Tapatalk

Magnifik81 said:
Hi, here's something from our friends with a Verizon s7 edge, they've written a step by step on how to flash the U firmware and what to do afterwards. What You and us t-mobile users need to flash is SM- G935U (TMO region) firmware which u can find on sammobile.com. Please read the instructions carefully and best of luck with flashing. Cheers!
http://forum.xda-developers.com/ver...de-flashing-sm-935u-firmware-verizon-t3415145
Click to expand...
Click to collapse
Keep in mind there's also a lot in here that doesn't pertain especially if you don't need root so be careful people, this as Mag says is for Verizon but the process is the same just make sure you have the T-Mobile files if on T-Mobile. You can download at SamMobile I have a SM-G935T which is now a G35U with the new modem APK1 and have wifi calling and VOLTE in my mobile network settings and ZERO bloat which is why U firmware is desired. It doesn't have any carrier bloat because it's not for any carrier so none have installed all their bloat so it's very fast. You will lose root and everything but can redo it and reroot also.. just make sure you're getting the right files and not flashing VZW on to T-Mobile etc etc. I ALMOST did then realized lol. I Got excited. I was never going to root so none if that mattered but I tried it and after all the suggested tweaks and fixed it still ran unacceptable for me so I'm not rooted at all now. Too buggy and too many weird FCs and errors/bugs so I factory rest and flashed U and new modem and my phone has never been faster even when rooted and CPU setting tweaked etc. (Too many bugs as stated)
Fas
---------- Post added at 12:38 PM ---------- Previous post was at 12:36 PM ----------
whittikins said:
Does it require root to flash U on the tmo variant?
Does it trip Knox?
Thanks
Click to expand...
Click to collapse
No because you're flashing an official firmware not a rom. No root and won't trip Knox as other have reported. This is true for all variants since it's an official firmware.
---------- Post added at 12:39 PM ---------- Previous post was at 12:38 PM ----------
I know I'm replying to some old posts here. But just
re-ittirating what others have said since many are just now starting to do the whole U thing.
Fas

i have a guide on this forum look it up

faslane said:
Keep in mind there's also a lot in here that doesn't pertain especially if you don't need root so be careful people, this as Mag says is for Verizon but the process is the same just make sure you have the T-Mobile files if on T-Mobile. You can download at SamMobile I have a SM-G935T which is now a G35U with the new modem APK1 and have wifi calling and VOLTE in my mobile network settings and ZERO bloat which is why U firmware is desired. It doesn't have any carrier bloat because it's not for any carrier so none have installed all their bloat so it's very fast. You will lose root and everything but can redo it and reroot also.. just make sure you're getting the right files and not flashing VZW on to T-Mobile etc etc. I ALMOST did then realized lol. I Got excited. I was never going to root so none if that mattered but I tried it and after all the suggested tweaks and fixed it still ran unacceptable for me so I'm not rooted at all now. Too buggy and too many weird FCs and errors/bugs so I factory rest and flashed U and new modem and my phone has never been faster even when rooted and CPU setting tweaked etc. (Too many bugs as stated)
Fas
---------- Post added at 12:38 PM ---------- Previous post was at 12:36 PM ----------
No because you're flashing an official firmware not a rom. No root and won't trip Knox as other have reported. This is true for all variants since it's an official firmware.
---------- Post added at 12:39 PM ---------- Previous post was at 12:38 PM ----------
I know I'm replying to some old posts here. But just
re-ittirating what others have said since many are just now starting to do the whole U thing.
Fas
Click to expand...
Click to collapse
Will Xposed work with no issues on this?
I'm currently rooted with Xposed installed , but the lag is driving me nuts even with all the tweaks

Izz14 said:
Will Xposed work with no issues on this?
I'm currently rooted with Xposed installed , but the lag is driving me nuts even with all the tweaks
Click to expand...
Click to collapse
Prob not. Many people including me have done ALL of the post root modifying to make it run better when rooted with very little success. I tried every single post root method to try and get it stable and nothing made a difference and if it did it sure wasn't stable anyways. So bad that I Reodined the entire thing and started fresh and didn't root. The root is very unstable and simply not worth it. I don't need root for anything I care about anyway and my S7 Edge is plenty fast. and running the U firmware there's no bloat except like 2-3 apps which I can live with and that was one major reason to root anyway (to delete the bloat) so meh to root for me.... If you read back many have reported this. I don't need nor want root and when I saw how bad it ran I immediately re did it all. Now it's lightning fast, I get amazing LTE speeds because if the APK1 MODEM and I'm in one if the 319 cities supporting the 4x4 MIMO LTE that the APJ1 Takes advantage of. My LTE is faster than most people's wifi. So I recommend d regarding the Odin and forgetting about root. It's just too buggy and I'm by no way a noob. Been here fir 10 years so I know what I'm doing and I couldn't get it stable enough even applying every single post root suggestion. It ran like crap and wasn't even usable unfortunately. No offense to the root team whatsoever they achieved root and kudos to them it's just not established enough to be a daily driver sorry to say.
My latest LTE speed abiut 20 mins ago. Not wifi....LTE..LOL it's amazing if yoyre in T-Mobile and you're in one if the cities supporting it. I imagine everywhere in the US will sooner or later it most cities. It's relatively new but I'm getting speeds unheard of. Before this I was getting like 10 mbps download and 8 Mbps upload
Not it's more like 6p-70 and 40-70 depending in where in my city I am. It varies deoending on how close to towers and what not you are if course. But damn it's fast.. wow

nandroiduser said:
i have a guide on this forum look it up
Click to expand...
Click to collapse
please quote the person you're replying to so we know who you're talking to. lol...it's a huge help! +1
Fas

is there a way to install this U firmware and then simply root it and not install all the other junk? I love it running U stock with the new modem because it HAULS ass, but I want to root so I can edit the build.prop and since you have to be rooted that's hay I ask. But the root causes all kinds of issues and post -root stuff needs to happen to get it even stable which none worked for me, a few did but it ran horrible so I immediately returned to stock and redid the U firmware. so is the something like a way to just root for file access only without it modifying anything else? I doubt it but don't know much abut the U firmware except it runs amazing until rooted at least from everything I'm reading. a couple peeps claim there's is running amazing even rooted but I have doubts...mine ran like total crap even after applying all the tweaks and kernel settings with Trickster and the like (which I know how to use very well and bought it and have owned and used it for years....any ideas? I want to edit the lcd from 640 to about 580 is all and don't want to root if it's going to bork everything up again...
TIA
Fas +1

i've tried multiple times and it fails to flash. any ideas why?
"FAIL! (Auth)"

Hi -
I am a person that just has to have his phone rooted. Dont ask me why, but I do. And I love custom ROMS. Since I do not really see any custom ROMS for the S7 yet,
I will settle for just rooting my S7, I was hopping someone would be kind enough to point me to the correct files needed to ROOT my phone and maybe a small odin walkthrough.
Phone info:
Galaxy S7 SM-G935T 6.0.1
Baseband G935TUVU4APK1
Build Number MNB29M.G35TUVU4APK1
Also ... what about TWRP support ? I want to be able to nandroid backup. Is there a version of TWRP out yet for the S7 ?
Thanks all !!

faslane said:
please quote the person you're replying to so we know who you're talking to. lol...it's a huge help! +1
Fas
Click to expand...
Click to collapse
Hi? Is it possible to downgrade to PB5 from the U firmware? I learnt latest stock got bootloader locked, so can't downgrade

faslane said:
is there a way to install this U firmware and then simply root it and not install all the other junk? I love it running U stock with the new modem because it HAULS ass, but I want to root so I can edit the build.prop and since you have to be rooted that's hay I ask. But the root causes all kinds of issues and post -root stuff needs to happen to get it even stable which none worked for me, a few did but it ran horrible so I immediately returned to stock and redid the U firmware. so is the something like a way to just root for file access only without it modifying anything else? I doubt it but don't know much abut the U firmware except it runs amazing until rooted at least from everything I'm reading. a couple peeps claim there's is running amazing even rooted but I have doubts...mine ran like total crap even after applying all the tweaks and kernel settings with Trickster and the like (which I know how to use very well and bought it and have owned and used it for years....any ideas? I want to edit the lcd from 640 to about 580 is all and don't want to root if it's going to bork everything up again...
TIA
Fas +1
Click to expand...
Click to collapse
Follow the instructions in the O.P. of the post-root issues *exactly*. Don't skip anything and don't add anything. Trickster is not listed in it. I followed it exactly and my rooted U just plain smokes!
---------- Post added at 04:58 PM ---------- Previous post was at 04:54 PM ----------
Thibor69 said:
Hi -
Since I do not really see any custom ROMS for the S7 yet
Also ... what about TWRP support ? I want to be able to nandroid backup. Is there a version of TWRP out yet for the S7 ?
Thanks all !!
Click to expand...
Click to collapse
The answer to both of these is that since the bootloader is locked, you can't install custom recoveries which makes custom Roms a lot harder (but not impossible!) There's two that are in the Roms subforum (TEK and Echoe) but I've personally found stock U firmware + root to be the fastest/most stable.

DOMF said:
Follow the instructions in the O.P. of the post-root issues *exactly*. Don't skip anything and don't add anything. Trickster is not listed in it. I followed it exactly and my rooted U just plain smokes!
---------- Post added at 04:58 PM ---------- Previous post was at 04:54 PM ----------
The answer to both of these is that since the bootloader is locked, you can't install custom recoveries which makes custom Roms a lot harder (but not impossible!) There's two that are in the Roms subforum (TEK and Echoe) but I've personally found stock U firmware + root to be the fastest/most stable.
Click to expand...
Click to collapse
I'm not rooted at all now you realize correct?
Ty,!! +1
Fas
---------- Post added at 05:56 PM ---------- Previous post was at 05:53 PM ----------
jazzdglass said:
Hi? Is it possible to downgrade to PB5 from the U firmware? I learnt latest stock got bootloader locked, so can't downgrade
Click to expand...
Click to collapse
Honestly I don't know. Haven't tried. U firmware smokes sonI wouldn't want to anyway lol. Maybe someone else knows
Fas
The bootloader's are all still locked so not sure that'd matter but I couldn't say.
Fas
---------- Post added at 06:02 PM ---------- Previous post was at 05:56 PM ----------
Thibor69 said:
Hi -
I am a person that just has to have his phone rooted. Dont ask me why, but I do. And I love custom ROMS. Since I do not really see any custom ROMS for the S7 yet,
I will settle for just rooting my S7, I was hopping someone would be kind enough to point me to the correct files needed to ROOT my phone and maybe a small odin walkthrough.
Phone info:
Galaxy S7 SM-G935T 6.0.1
Baseband G935TUVU4APK1
Build Number MNB29M.G35TUVU4APK1
Also ... what about TWRP support ? I want to be able to nandroid backup. Is there a version of TWRP out yet for the S7 ?
Thanks all !!
Click to expand...
Click to collapse
Is your reason for "have to have root" for a specific reason or no? This root us really laggy and buggy as hell so if I were you I wouldn't do it. There's no Roms really. Well two I think but it's going to be more if a headache than the benefit of root. No one "has" to have root. What do you need that's so important by rooting. That's silly....
---------- Post added at 06:04 PM ---------- Previous post was at 06:02 PM ----------
Dbzadct said:
i've tried multiple times and it fails to flash. any ideas why?
"FAIL! (Auth)"
Click to expand...
Click to collapse
What fails,? What happens? Details...which files did you use from where and what fails at what spot in the process?
---------- Post added at 06:05 PM ---------- Previous post was at 06:04 PM ----------
Dbzadct said:
i've tried multiple times and it fails to flash. any ideas why?
"FAIL! (Auth)"
Click to expand...
Click to collapse
Did you flash the home CSC or non home?
---------- Post added at 06:07 PM ---------- Previous post was at 06:05 PM ----------
Thibor69 said:
Hi -
I am a person that just has to have his phone rooted. Dont ask me why, but I do. And I love custom ROMS. Since I do not really see any custom ROMS for the S7 yet,
I will settle for just rooting my S7, I was hopping someone would be kind enough to point me to the correct files needed to ROOT my phone and maybe a small odin walkthrough.
Phone info:
Galaxy S7 SM-G935T 6.0.1
Baseband G935TUVU4APK1
Build Number MNB29M.G35TUVU4APK1
Also ... what about TWRP support ? I want to be able to nandroid backup. Is there a version of TWRP out yet for the S7 ?
Thanks all !!
Click to expand...
Click to collapse
No two. Locked boitloader still so no way to install twrp.
---------- Post added at 06:09 PM ---------- Previous post was at 06:07 PM ----------
Dbzadct said:
i've tried multiple times and it fails to flash. any ideas why?
"FAIL! (Auth)"
Click to expand...
Click to collapse
Please provide more info what phone are you flashing. Where did you get the files, are you flashing the home CSC or other one what's exactly happening. Fail is too vague to help you fix.

jazzdglass said:
Hi? Is it possible to downgrade to PB5 from the U firmware? I learnt latest stock got bootloader locked, so can't downgrade
Click to expand...
Click to collapse
I'm not sure bud. I LOVE the U firmware and the APK1 modem for Tmobile have made my LTE VERY fast and the U firmware as well with ZERO bloat. I wouldn't downgrade anyway but can't answer your question, I simply don't know. Are you on ATT or something? I haven't heard of that firmware even...but I've been on Tmobile for about 6 years or so...
Fas

What fails,? What happens? Details...which files did you use from where and what fails at what spot in the process?
---------- Post added at 06:05 PM ---------- Previous post was at 06:04 PM ----------
Did you flash the home CSC or non home?
---------- Post added at 06:07 PM ---------- Previous post was at 06:05 PM ----------
No two. Locked boitloader still so no way to install twrp.
---------- Post added at 06:09 PM ---------- Previous post was at 06:07 PM ----------
Please provide more info what phone are you flashing. Where did you get the files, are you flashing the home CSC or other one what's exactly happening. Fail is too vague to help you fix.[/QUOTE]
sorry rookie mistake, i was on latest update for the Tmo version, i flashed the Home CSC, it started the first few steps and then got that error. this is the firmware i was using TMB-G935UUEU2APEH-2-160614112610

Samsung Galaxy Tab S2 T818 Update on TWRP and root

Like the title says, the new T-Mobile version of the S2 with the Snapdragon processor. Is there any type of development being looked at for it? I'm looking to be able to debloat it at the very least. Any knowledge of that here at all?
UPDATE: So looks like that TWRP for the T819 works great for the T818 devices. Go to this thread https://forum.xda-developers.com/ta...2-1-galaxy-tab-s22016-sm-t713-t3390627/page67 and follow the directions there.
All thanks and credit to @ashyx and any other TWRP devs for this.

I too would like to know about this. I just want root. I read that 813 may be possible because of processor but I don't know

piezan said:
I too would like to know about this. I just want root. I read that 813 may be possible because of processor but I don't know
Click to expand...
Click to collapse
Don't know if you noticed in the TWRP thread, but we finally have our answer. Try using TWRP for the T819. I'll be giving it a try after work. If you do it sooner can you let me know if it works? One of us is going to have to be the guinea pig.

justibasa said:
Don't know if you noticed in the TWRP thread, but we finally how our answer. Try using TWRP for the 819T. I'll be giving it a try after work. If you do it sooner can you let me know if it works. One of us is going to have to be the guinea pig.
Click to expand...
Click to collapse
i am trying it now and it just fails.

piezan said:
i am trying it now and it just fails.
Click to expand...
Click to collapse
Did you go into developer settings and make sure OEM unlocking was checked? Says in the TWRP op that you may have to do that.

justibasa said:
Did you go into developer settings and make sure OEM unlocking was checked? Says in the TWRP op that you may have to do that.
Click to expand...
Click to collapse
working 100 percent i forgot to uncheck autoroot
---------- Post added at 06:42 AM ---------- Previous post was at 06:37 AM ----------
next we need a permissive kernel any ideas?

piezan said:
working 100 percent i forgot to uncheck autoroot
---------- Post added at 06:42 AM ---------- Previous post was at 06:37 AM ----------
next we need a permissive kernel any ideas?
Click to expand...
Click to collapse
Deleted

justibasa said:
There is a permissive kernel on the development section for the 819. It might be worth a try. https://forum.xda-developers.com/tab-s2/development/kernel-sm-t713-permissive-kernel-t3425938/page17
Click to expand...
Click to collapse
it says 719 and 813 in the op, which would i use?

piezan said:
it says 719 and 813 in the op, which would i use?
Click to expand...
Click to collapse
Neither of them. I misread. Could have swore I saw 819. My bad dude. Got a little overexcited when I saw TWRP was working.

justibasa said:
Neither of them. I misread. Could have swore I saw 819. My bad dude. Got a little overexcited when I saw TWRP was working.
Click to expand...
Click to collapse
thats fine, thats why i waited. I am now going to test xposed and let you know.

piezan said:
thats fine, thats why i waited. I am now going to test xposed and let you know.
Click to expand...
Click to collapse
Yeah just wanted to check with you to make sure root worked, and what root you used. SuperSU or PHH?

justibasa said:
Yeah just wanted to check with you to make sure root worked, and what root you used. SuperSU or PHH?
Click to expand...
Click to collapse
super su. it installs when you do this...https://forum.xda-developers.com/tab-s2/development/twrp-3-0-2-1-galaxy-tab-s22016-sm-t713-t3390627
make sure you get the encryption installed before supersu
---------- Post added at 07:27 AM ---------- Previous post was at 07:06 AM ----------
piezan said:
super su. it installs when you do this...https://forum.xda-developers.com/tab-s2/development/twrp-3-0-2-1-galaxy-tab-s22016-sm-t713-t3390627
make sure you get the encryption installed before supersu
Click to expand...
Click to collapse
ok it didnt install but now it keeps rebooting into recovery every time i system reboot. even after restore.

piezan said:
super su. it installs when you do this...https://forum.xda-developers.com/tab-s2/development/twrp-3-0-2-1-galaxy-tab-s22016-sm-t713-t3390627
make sure you get the encryption installed before supersu
---------- Post added at 07:27 AM ---------- Previous post was at 07:06 AM ----------
ok it didnt install but now it keeps rebooting into recovery every time i system reboot. even after restore.
Click to expand...
Click to collapse
Deleted

sssoooo......
what wasoutcome? root work?

jcole6197 said:
what wasoutcome? root work?
Click to expand...
Click to collapse
Yes it works.

Anyone tried it on the T818a?
would love to update my device and get it rooted but im not seeing much development on it. Anyone know it this works on the AT&T S2 (SM-T818?)

How to install xposed on V20 (US996)

How do you install xposed on V20 since we now have it..haven't done it since M on my LG G4

astonmartin214 said:
How do you install xposed on V20 since we now have it..haven't done it since M on my LG G4
Click to expand...
Click to collapse
Although I'm using TMobile variant, It's pretty much the same process as on 6.0+
The easiest way is to download Xposed installer then flash the framework via recovery within the app itself
Sent from my LG-H918 using XDA-Developers Legacy app

Chance Ill said:
Although I'm using TMobile variant, It's pretty much the same process as on 6.0+
The easiest way is to download Xposed installer then flash the framework via recovery within the app itself
Click to expand...
Click to collapse
Yea only issue with root on this device is you have to wipe the device in order to apply it

This is a good way to get stuck in a boot loop do not install xposed ona us996 this way!
---------- Post added at 07:52 AM ---------- Previous post was at 07:40 AM ----------
Ok not a boot loop. But it took around 20 mins to boot.

Cronic318 said:
This is a good way to get stuck in a boot loop do not install xposed ona us996 this way!
---------- Post added at 07:52 AM ---------- Previous post was at 07:40 AM ----------
Ok not a boot loop. But it took around 20 mins to boot.
Click to expand...
Click to collapse
Can confirm this is still a problem today. It looks like nothing is happening for about 20 minutes but then it switches to "Android is starting 78%"

Trying to switch from SuperSu to magisk

So I have the AT&T variant of the LG v20(h910) and I'm trying to figure out how to switch from SuperSU to magisk, I'm trying to use Google pay to send money but it won't let me because I am rooted but I know if I use magisk I can get past all of that so can anyone help me out here where do I start?

Hi dude,
Download the latest rom for your phone, download magisk, use kdzwriter to update your phone '-a' option, then use the '-k' option to unroot the phone and install kernal and magisk via TWRP and wipe cache blablabla. Takes like 10 minutes or less without the downloads.

Supersu
Which do you think is better
---------- Post added at 04:32 PM ---------- Previous post was at 04:18 PM ----------
Which do you think is better

Zhanozuki said:
Which do you think is better
Click to expand...
Click to collapse
Magisk without a doubt.

All done
Ok guys i got it, thanks for the help, but i do have one question, is there a way i can get free wifi tethering?