I sent the CPU board back to Klyde because it was bricked and when I got it back the display is upside down in either direction (vertical or horizontal) ... Has anyone run into this before?
Use 5-finger-touch for some seconds and you can calibrate it again.
rigattoni said:
Use 5-finger-touch for some seconds and you can calibrate it again.
Click to expand...
Click to collapse
I tried that and it didn't work ... Unless I did something wrong ...
OlFart1152 said:
I tried that and it didn't work ... Unless I did something wrong ...
Click to expand...
Click to collapse
You need to keep 5 fingers on the screen until a square comes up in the upper corner.
Spread your fingers as far as possible to get this working.
That can take 10 seconds to get it activated.
rigattoni said:
You need to keep 5 fingers on the screen until a square comes up in the upper corner.
Spread your fingers as far as possible to get this working.
That can take 10 seconds to get it activated.
Click to expand...
Click to collapse
That's what I did and I chased the red boxes around the screen but nothing changed ...
Hmmm... seems that you need to get in contact with the seller.
Create a video where you show the 5-finger-touch process and start with a total to show that the screen is mirrored.
OlFart1152 said:
That's what I did and I chased the red boxes around the screen but nothing changed ...
Click to expand...
Click to collapse
I found a setting for that:
Go to settings --> System Info, where MCU versio and so on is written.
Touch the screen until a pin input comes up. --> Pin is 7890
In this menu scroll a bit down and you will find the setting for "Screen Rotating" and switch it over. (mine is set to negative)
Choose the Select button on top and mark the setting on the right of the screen and press the Save button on top.
Afterwards you can export your settings and press "Save and reboot" button.
With the next upstart the unit should be correct.
Please give some feedback if that helps.
rigattoni said:
I found a setting for that:
Go to settings --> System Info, where MCU versio and so on is written.
Touch the screen until a pin input comes up. --> Pin is 7890
In this menu scroll a bit down and you will find the setting for "Screen Rotating" and switch it over. (mine is set to negative)
Choose the Select button on top and mark the setting on the right of the screen and press the Save button on top.
Afterwards you can export your settings and press "Save and reboot" button.
With the next upstart the unit should be correct.
Please give some feedback if that helps.
Click to expand...
Click to collapse
Thank you rigattoni that was exactly what I needed ... All is well now ...
rigattoni said:
I found a setting for that:
Go to settings --> System Info, where MCU versio and so on is written.
Touch the screen until a pin input comes up. --> Pin is 7890
In this menu scroll a bit down and you will find the setting for "Screen Rotating" and switch it over. (mine is set to negative)
Choose the Select button on top and mark the setting on the right of the screen and press the Save button on top.
Afterwards you can export your settings and press "Save and reboot" button.
With the next upstart the unit should be correct.
Please give some feedback if that helps.
Click to expand...
Click to collapse
That's right, I also solved the problem. Thank you!
Related
Hi!
Is it possible to get this today-plugin mapped to a soft- or hardkey? If not, does a similar app exists to unlock the device with 2 keystrokes?
???
There are a couple of apps out there that will lock the screen. ScreenLock is one of them - it requires you to press two buttons at once. Another is MortSaver. Just do a search on the usual PPC software sites for "lock".
warx said:
Hi!
Is it possible to get this today-plugin mapped to a soft- or hardkey? If not, does a similar app exists to unlock the device with 2 keystrokes?
Click to expand...
Click to collapse
Place the device lock Plug in at the top of your "Today" screen (must disable Date plugin). When you are in today screen, you can scroll (arrow down) one click and then click on the action button to lock device.
squeeze said:
warx said:
Hi!
Is it possible to get this today-plugin mapped to a soft- or hardkey? If not, does a similar app exists to unlock the device with 2 keystrokes?
Click to expand...
Click to collapse
Place the device lock Plug in at the top of your "Today" screen (must disable Date plugin). When you are in today screen, you can scroll (arrow down) one click and then click on the action button to lock device.
Click to expand...
Click to collapse
Genius lateral thinking. I like that. Well Done
Two new tools were released the last few days, the both use the built-in device lock. Have a look here:
http://forum.xda-developers.com/viewtopic.php?t=45953
and here:
http://forum.xda-developers.com/viewtopic.php?t=45851
Haven't yet figured out if I can also unlock without pulling out the stylus. Anyone know?
B
you can, but the plugin was designed for devices that have a full phone pad available when the screen is (e.g. smartphones, mostly); it uses the * key. You can use the same key on the wizard, but of course you have to slide out the keyboard for that
hehe, I already tried that and it's "a bit" inconvenient (considering that i also have to press the "blue dot" key to get the *)
But thanks for replying
B
THIS ONE works perfect!
http://www.mr2-power.com/downloads/DeviceLock.CAB
Just install it. Map it to a hardwarekey and there you go. I have it running on my MDA Vario and it works just perfect. One button push and the device is locked. You can even change settings ( just go to settings/system and you will see a new icon - Device Lock - )
Super little helper! This is a (IMHO) must-have-tool
DREAMBOXER said:
THIS ONE works perfect!
Click to expand...
Click to collapse
it's basically the one from 3 (now 4) posts up, no?
http://forum.xda-developers.com/viewtopic.php?t=45953
ZeBoxx said:
DREAMBOXER said:
THIS ONE works perfect!
Click to expand...
Click to collapse
it's basically the one from 3 (now 4) posts up, no?
http://forum.xda-developers.com/viewtopic.php?t=45953
Click to expand...
Click to collapse
you are correct in that this tool is great ! How do I map it to a key though...
1. Start > Settings > |Personal| > Buttons
2. Select a button from the list
3. Under "Assign a program:" pick "Device Lock"
done
I came across a problem when I try to uninstall the program. After a successful unintall, I simply soft resetted my device. When the deviced booted back up, I received an error message stating that it failed to start the Device Lock program and showed the path where it used to be installed.
I looked at all the locaitons where it might have left a trail but at the end, the error message would constantly show up and slow my device down.
I had to hard reset the device. Why does it do that ?
The program may have left a notification in the notification queue. Speak to Matt to check if the program removes this on uninstallation, or remove it manually with Memaid or SKTools.
My app can remove its own notification with the -remove command line.
But you should remove the notification before uninstallation to prevent the message.
V
I remember I used to be able to press any buttons to turn on the Dopod. it used to be under settings -> Buttons -> lock tabs.
but now that it's disappeared, is there any other work around?
Thanks
Maybe this way?
Start, Settings, click the System tab, then click on Key Lock. Select "Do not lock buttons"? Let me know if this is not what you were looking for.
ltxda said:
Maybe this way?
Start, Settings, click the System tab, then click on Key Lock. Select "Do not lock buttons"? Let me know if this is not what you were looking for.
Click to expand...
Click to collapse
Yes sorry, I found out this afternoon, I was stupid it was right in front of me.
It used to be under buttons tab
Thanks,
hi all...
the lock screen on my hd2 has gone missing... pressing the red button directly brings me into the sense UI... any suggestions what went wrong?
thanks!
any help with above issue pls?
Have you recently installed then uninstalled a custom lockscreen? Look at my sticky (link in my sig) and towards the bottom of the first post you'll see some attached cabs. download the one that says Lockscreen HD2 original then install it. It should bring you back to normal.
ddgarcia05 said:
Have you recently installed then uninstalled a custom lockscreen? Look at my sticky (link in my sig) and towards the bottom of the first post you'll see some attached cabs. download the one that says Lockscreen HD2 original then install it. It should bring you back to normal.
Click to expand...
Click to collapse
hi there...
i did stumble upon your sticky and downloaded the lockscreen HD2 original cab file yesterday itself. I have soft reset the device after the installation but still there is no lock screen. Once the device boots up its directly in the Sense UI. Anything else I can do to fix OR might have done wrong?
Thanks for your input!
** Also, to answer your question, no i have not installed or uninstalled any custom lockscreen.. I am still in the learning stages of flashing a ROM and once I get comfortable with all the steps involved, I'll take the plunge but at this point the device is in stock condition except for the apps I have installed. Thanks
morphosin said:
hi there...
i did stumble upon your sticky and downloaded the lockscreen HD2 original cab file yesterday itself. I have soft reset the device after the installation but still there is no lock screen. Once the device boots up its directly in the Sense UI. Anything else I can do to fix OR might have done wrong?
Thanks for your input!
** Also, to answer your question, no i have not installed or uninstalled any custom lockscreen.. I am still in the learning stages of flashing a ROM and once I get comfortable with all the steps involved, I'll take the plunge but at this point the device is in stock condition except for the apps I have installed. Thanks
Click to expand...
Click to collapse
Maybe something here will help. did you install Bsb Tweaks, also try installing the lockscreen cab to device.
http://forum.xda-developers.com/showthread.php?t=658884&highlight=lockscreen
ddgarcia05 said:
Maybe something here will help. did you install Bsb Tweaks, also try installing the lockscreen cab to device.
http://forum.xda-developers.com/showthread.php?t=658884&highlight=lockscreen
Click to expand...
Click to collapse
Thanks for the link - it kind of helped, which is to say - when i go to start menu and tap on "lock" it does lock the screen but after unlocking it when i press the red button to shut the display and again press it the lockscreen doesnt come up.. i'd hate to click twice before I press the red button only to make sure it doesnt come to life and call my aunt while in my pocket :-/
I tried reinstalling the cab from your sticky to the device (coz I wasnt sure where i had installed it previously) but the problem persists and No I havent installed any BSB or any other tweaks (atleast not intentionally)
So when you go to start , etc, then lock, after you unlock it you're presented with the lock screen Options. Are those set accordingly? Once set, it'll ask you to save changes, then click ok in top right corner.
jimbonics said:
So when you go to start , etc, then lock, after you unlock it you're presented with the lock screen Options. Are those set accordingly? Once set, it'll ask you to save changes, then click ok in top right corner.
Click to expand...
Click to collapse
Okay so here's what I do -
- tap on start menu
- bottom left soft key says "lock"
- tap on lock
- device lockscreen comes on
- now if i press the red button to switch off and then press it again, the lockscreen stays.
-but if i slide the lock on the lockscreen to reveal the sense UI, close the device and then switch it on again, it doesnt show me the lockscreen
does that help you help me?
thanks a ton for your patience!
morphosin said:
Okay so here's what I do -
- tap on start menu
- bottom left soft key says "lock"
- tap on lock
- device lockscreen comes on
- now if i press the red button to switch off and then press it again, the lockscreen stays.
-but if i slide the lock on the lockscreen to reveal the sense UI, close the device and then switch it on again, it doesnt show me the lockscreen
does that help you help me?
thanks a ton for your patience!
Click to expand...
Click to collapse
Do you have cookies home tab/chteditor or bsb tweaks installed? If you do that might be causing the fail.
ddgarcia05 said:
Do you have cookies home tab/chteditor or bsb tweaks installed? If you do that might be causing the fail.
Click to expand...
Click to collapse
No I dont. I dont have any of those installed. I want to install the cookies but havent installed any mods yet. The only things I've installed on there are apps.
One of them being Resco Explorer which has a Task manager with it. Could that have made my screen disappear?
morphosin said:
No I dont. I dont have any of those installed. I want to install the cookies but havent installed any mods yet. The only things I've installed on there are apps.
One of them being Resco Explorer which has a Task manager with it. Could that have made my screen disappear?
Click to expand...
Click to collapse
I don't think Resco Task Manager is the problem. I have it installed, and I still have the Lock screen that displays when I hit the red key.
brucegil said:
I don't think Resco Task Manager is the problem. I have it installed, and I still have the Lock screen that displays when I hit the red key.
Click to expand...
Click to collapse
Thanks for the input. Any other checks from anybody as to how can i solve this problem? I really dont wanna find refuge in hard reset... its kinda pain in the we know where to setup all the accounts n stuff
thanks
morphosin said:
Okay so here's what I do -
- tap on start menu
- bottom left soft key says "lock"
- tap on lock
- device lockscreen comes on
- now if i press the red button to switch off and then press it again, the lockscreen stays.
-but if i slide the lock on the lockscreen to reveal the sense UI, close the device and then switch it on again, it doesnt show me the lockscreen
does that help you help me?
thanks a ton for your patience!
Click to expand...
Click to collapse
Listen...
Once you go to the start menu, select SETTINGS. Then tap the MENU soft key in the bottom right and select ALL SETTINGS. You should see LOCK in the top-right. Tap it, this locks your screen. Immediately unlock. You are now at the LOCKSCREEN OPTIONS page. Set accordingly. Save. Tap OK in top right. Done. Drink a beer.
jimbonics said:
Listen...
Once you go to the start menu, select SETTINGS. Then tap the MENU soft key in the bottom right and select ALL SETTINGS. You should see LOCK in the top-right. Tap it, this locks your screen. Immediately unlock. You are now at the LOCKSCREEN OPTIONS page. Set accordingly. Save. Tap OK in top right. Done. Drink a beer.
Click to expand...
Click to collapse
I already tried this before.. Tapping on the Lock icon in the "ALL SETTINGS" does not lock the screen. Instead, it directly takes me to the password screen (maybe what you referred to as lockscreen options) where my first choice is a checkbox for "Prompt if phone unused for ___ mins and the other option is to choose a password.
Yeah that's the stuff. That's where you enable it. Check the box, set the password (pin).
Sorry for not realizing you had been there. If setting and saving those options doesn't work, not sure what to tell you.
Are you connected to an exchange server?
(you have to make sure after you hit the obvious SAVE button that pops up, you have to hit the OK button in the top right the screen.)
jimbonics said:
Yeah that's the stuff. That's where you enable it. Check the box, set the password (pin).
Sorry for not realizing you had been there. If setting and saving those options doesn't work, not sure what to tell you.
Are you connected to an exchange server?
(you have to make sure after you hit the obvious SAVE button that pops up, you have to hit the OK button in the top right the screen.)
Click to expand...
Click to collapse
Thanks for all the help ya'll
The problem wasnt gettin resolved so finally i hard reset, well actually i was plannin on flashing with a new ROM so did that... got the chuckyROM on there now... rocks!!
Thanks again
edited cuz of mistaken
I know im not the only one who has this issue...If im on a call and have a black screen the want to hang up, more often than not I find myself waiving my phone around or trying to find a button that will wake up the screen so I can end the call. anyone have a quick way to get this done? thanks.
just move the screen away from your head and the screen should light up
If it doesn't return phone to stock with odin then take it into sprint and tell them you want it fixed (If you have insurance)
its normally when im on speakerphone and have my phone on a table or center console
I have some icon on my screen that I can't get off... Can you help?"?????D?SD
OO then try changing your "screen timeout"
Settings---> Display--->Screen timeout
try setting it a little higher so it wouldn't turn off
azyouthinkeyeiz said:
I have some icon on my screen that I can't get off... Can you help?"?????D?SD
Click to expand...
Click to collapse
Can you describe the icon ?
iSaint said:
Can you describe the icon ?
Click to expand...
Click to collapse
Sorry It was tongue in cheek...
Just implying, that we can't help out unless we are given some more info... :\
Ie... OP.... What is the rom you are running, what kernel have you flashed, what add ons have you messed around with, what themes have you tried, etc...
azyouthinkeyeiz said:
Sorry It was tongue in cheek...
Just implying, that we can't help out unless we are given some more info...\
Ie... OP.... what is the rom are you on, what kernel have you flashed, what add ons have you messed around with, what themes have you tried, etc...
Click to expand...
Click to collapse
Ugh i never get those kinds of jokes 8(
i am to stupid
iSaint said:
i am to stupid
Click to expand...
Click to collapse
Hey! Don't say that! It's only true if you believe it to be! lol..
BTW.. I love your signature...
OP.. Try waving your finger over the top portion of the housing above the screen and see if it is your screen protector messing with the proximity sensor by lifting the corner to give it unobstructed access to light..... That is a pretty common issue...
Another option is to enable ending the call with the power key (assuming your on 2.2)... This way, even if the screen is unlit, a simple press of the power key will disconnect the call.
To enable this option, hit Menu->Settings->Accessibility->(if you get a popup saying "No accessibility applications found", just hit cancel)->then toggle the box next to "The power key ends calls".
Koadic said:
Another option is to enable ending the call with the power key (assuming your on 2.2)... This way, even if the screen is unlit, a simple press of the power key will disconnect the call.
To enable this option, hit Menu->Settings->Accessibility->(if you get a popup saying "No accessibility applications found", just hit cancel)->then toggle the box next to "The power key ends calls".
Click to expand...
Click to collapse
the only problem with this is if you're on a call that you need to press numbers on (like press 1 for english, 2 for spanish, etc).
the only way I know to wake up the screen when on speaker is the power button so for that reason only, I'd advise against this. I say just tap the power button and be on your way.
Koadic said:
Another option is to enable ending the call with the power key (assuming your on 2.2)... This way, even if the screen is unlit, a simple press of the power key will disconnect the call.
To enable this option, hit Menu->Settings->Accessibility->(if you get a popup saying "No accessibility applications found", just hit cancel)->then toggle the box next to "The power key ends calls".
Click to expand...
Click to collapse
PERFECT! Thats just what I needed
I'm frustrated!
I want to edit the order of my "Quick Settings" in the Notification bar, but there is no icon (the pencil icon on the right side up) where it should be!
Also, when I press the "Options" button (the three squares) in the Settings page, most option are missing!
The only one that appears is 'List view' (to a total of 2 views - 'Grid view' and 'List view'), whereas the third view, the 'Edit quick settings' and the 'Help' options are missing!
I've got pictures to prove my point and help you see my problem but, unfortuately I can't post them here.
What is wrong? Is it because of the edition of the phone?
MenelmacarGR said:
I'm frustrated!
I want to edit the order of my "Quick Settings" in the Notification bar, but there is no icon (the pencil icon on the right side up) where it should be!
Also, when I press the "Options" button (the three squares) in the Settings page, most option are missing!
The only one that appears is 'List view' (to a total of 2 views - 'Grid view' and 'List view'), whereas the third view, the 'Edit quick settings' and the 'Help' options are missing!
I've got pictures to prove my point and help you see my problem but, unfortuately I can't post them here.
What is wrong? Is it because of the edition of the phone?
Click to expand...
Click to collapse
Depending on the device model and also the firmware version, there are some variation of the Settings menu. So I cannot realize what is your Settings menu structure.
You can open the S Finder and enter 'notification panel' to search.
vndnguyen said:
Depending on the device model and also the firmware version, there are some variation of the Settings menu. So I cannot realize what is your Settings menu structure.
You can open the S Finder and enter 'notification panel' to search.
Click to expand...
Click to collapse
Same thing happens. I sadly think it is because of the firmware, as you say, and there is nothing I can do about it.
Thanks for your reply, though!
MenelmacarGR said:
Same thing happens. I sadly think it is because of the firmware, as you say, and there is nothing I can do about it.
Thanks for your reply, though!
Click to expand...
Click to collapse
What does that mean? Did you find this menu using S Finder?
If you cannot find this settings, here is another way:
Install Shortcut Master app, open Menu > Search > enter 'notificationpanelsetting' to search. Finally tap on the search result to open this settings.
vndnguyen said:
What does that mean? Did you find this menu using S Finder?
Click to expand...
Click to collapse
Yes and, again, the notification panel had no pencil on the uppermost right corner. :/
vndnguyen said:
If you cannot find this settings, here is another way:
Install Shortcut Master app, open Menu > Search > enter 'notificationpanelsetting' to search. Finally tap on the search result to open this settings.
Click to expand...
Click to collapse
I had high hopes for this (on my search on the Net, I found no solution like this) but, alas, the search came back with 0 results. Searched both 'notificationpanelsetting' and 'notificationpanelsettings', and 0 results for 'notificationpanel' as well!
edit:
Oooh! That's why I thought I recognised the name of the app creator - it was you! Nice job, btw!
Sorry, I have searched on my Note 3, not S5.
However the function may be missing because of different firmwares.
You can bypass this problem by flashing another firmware.
vndnguyen said:
You can bypass this problem by flashing another firmware.
Click to expand...
Click to collapse
I have no idea what this sentence means!
So, I guess, I'll just have to get used to it...
Thank you, anyway!
MenelmacarGR said:
I have no idea what this sentence means!
So, I guess, I'll just have to get used to it...
Thank you, anyway!
Click to expand...
Click to collapse
Sorry for my poor english I mean if you flash another stock firmware, you will get back all functionality.
Sent from my SM-N9005 using Tapatalk