I know im not the only one who has this issue...If im on a call and have a black screen the want to hang up, more often than not I find myself waiving my phone around or trying to find a button that will wake up the screen so I can end the call. anyone have a quick way to get this done? thanks.
just move the screen away from your head and the screen should light up
If it doesn't return phone to stock with odin then take it into sprint and tell them you want it fixed (If you have insurance)
its normally when im on speakerphone and have my phone on a table or center console
I have some icon on my screen that I can't get off... Can you help?"?????D?SD
OO then try changing your "screen timeout"
Settings---> Display--->Screen timeout
try setting it a little higher so it wouldn't turn off
azyouthinkeyeiz said:
I have some icon on my screen that I can't get off... Can you help?"?????D?SD
Click to expand...
Click to collapse
Can you describe the icon ?
iSaint said:
Can you describe the icon ?
Click to expand...
Click to collapse
Sorry It was tongue in cheek...
Just implying, that we can't help out unless we are given some more info... :\
Ie... OP.... What is the rom you are running, what kernel have you flashed, what add ons have you messed around with, what themes have you tried, etc...
azyouthinkeyeiz said:
Sorry It was tongue in cheek...
Just implying, that we can't help out unless we are given some more info...\
Ie... OP.... what is the rom are you on, what kernel have you flashed, what add ons have you messed around with, what themes have you tried, etc...
Click to expand...
Click to collapse
Ugh i never get those kinds of jokes 8(
i am to stupid
iSaint said:
i am to stupid
Click to expand...
Click to collapse
Hey! Don't say that! It's only true if you believe it to be! lol..
BTW.. I love your signature...
OP.. Try waving your finger over the top portion of the housing above the screen and see if it is your screen protector messing with the proximity sensor by lifting the corner to give it unobstructed access to light..... That is a pretty common issue...
Another option is to enable ending the call with the power key (assuming your on 2.2)... This way, even if the screen is unlit, a simple press of the power key will disconnect the call.
To enable this option, hit Menu->Settings->Accessibility->(if you get a popup saying "No accessibility applications found", just hit cancel)->then toggle the box next to "The power key ends calls".
Koadic said:
Another option is to enable ending the call with the power key (assuming your on 2.2)... This way, even if the screen is unlit, a simple press of the power key will disconnect the call.
To enable this option, hit Menu->Settings->Accessibility->(if you get a popup saying "No accessibility applications found", just hit cancel)->then toggle the box next to "The power key ends calls".
Click to expand...
Click to collapse
the only problem with this is if you're on a call that you need to press numbers on (like press 1 for english, 2 for spanish, etc).
the only way I know to wake up the screen when on speaker is the power button so for that reason only, I'd advise against this. I say just tap the power button and be on your way.
Koadic said:
Another option is to enable ending the call with the power key (assuming your on 2.2)... This way, even if the screen is unlit, a simple press of the power key will disconnect the call.
To enable this option, hit Menu->Settings->Accessibility->(if you get a popup saying "No accessibility applications found", just hit cancel)->then toggle the box next to "The power key ends calls".
Click to expand...
Click to collapse
PERFECT! Thats just what I needed
Related
Is there a working version for a Device Lock for my beloved HD? I want my HD to be locked when a notification pops up or a phone call comes in. Actually its unlocked after a call or notification.....
Candy-men said:
Is there a working version for a Device Lock for my beloved HD? I want my HD to be locked when a notification pops up or a phone call comes in. Actually its unlocked after a call or notification.....
Click to expand...
Click to collapse
try S2u2.
Do a search - there are a few similar discussions!
i like the pocket shield on my touch hd -> http://pocketshield.netserver01.com/
I´ve tried S2U2 on my Wizard with some strange problems like Battery drain etc. Pocketshield works so far, but i loved the simplyness of DeviceLock.
Isn´t there any way to lock the device on wake up? Pocketshield shouldn´t be the last fix for this problem....
PocketShield is the best for the HD.
arturobandini said:
PocketShield is the best for the HD.
Click to expand...
Click to collapse
What version?
I´ve tryed aout Phoneshield, but i wasn´t that surprised of it. Now i´ve tryed This:
Goto registry:
HKEY_CurrentUser\ControlPanel\Backlight\[AutoDeviceLockEnable set to 1]
HKEY_CurrentUser\ControlPanel\Backlight\LockLevel\[LockLevel set to 1]
That works for me without installing any Software
Candy-men said:
I´ve tryed aout Phoneshield, but i wasn´t that surprised of it. Now i´ve tryed This:
Goto registry:
HKEY_CurrentUser\ControlPanel\Backlight\[AutoDeviceLockEnable set to 1]
HKEY_CurrentUser\ControlPanel\Backlight\LockLevel\[LockLevel set to 1]
That works for me without installing any Software
Click to expand...
Click to collapse
however doing this modification at registry can I answer to a call sliding to green the on screen indicator?
or am I forced to press phisical anser button?
The Modification doesn´t change the behaviour of the answer screen....
So it works perfectly for me.....
and after....
Candy-men said:
The Modification doesn´t change the behaviour of the answer screen....
So it works perfectly for me.....
Click to expand...
Click to collapse
and after how many time lock the device and can i eventually change (30 60)
thank'you
Candy-men said:
The Modification doesn´t change the behaviour of the answer screen....
So it works perfectly for me.....
Click to expand...
Click to collapse
ah that's fine thx
I would to know one thing, I see two different key to lock the phone:
AutoDeviceLockEnable
LockLevel
why? isn't enough only one of them? for example backlight lockenable?
pls explain to me what exactly these 2 keys so
quick question :
which registry entry governs the backlight display on the lock screen,
at the moment i've got the phone dimming after 30 seconds, then it locks and the light comes back on. for about 30 seconds. ideal the lock screen would be illuminated for about 10 seconds then blank the screen.
What reg entries do i need to set to sort this out ?
answers appreciated.
many thanks.
Hi,
HTC End Key is included, hold End Key 3 seconds an device locked.
wfg
starbase64
Candy-men said:
I´ve tried S2U2 on my Wizard with some strange problems like Battery drain etc. Pocketshield works so far, but i loved the simplyness of DeviceLock.
Isn´t there any way to lock the device on wake up? Pocketshield shouldn´t be the last fix for this problem....
Click to expand...
Click to collapse
am I missing a trick here, doesn't pressing the 'end call' button lock your phone with out the need to install extra software ????
Jezwick said:
am I missing a trick here, doesn't pressing the 'end call' button lock your phone with out the need to install extra software ????
Click to expand...
Click to collapse
by default yes, but you can amend the function of the long key press if you like via the buttons menu in further options.
i've got mine killing off connections data/phone, for example with the power button at the top locking the phone.
works for me.
Hi!
I'm still struggeling to find the right way to lock the phone. The ideal solution would be to:
1) Have the phone unlocked when I switch it on with the Power button (so that I can immediately use it after deliberately turning it on)
2) Have the phone automatically locked when it wakes up due to a phone call or SMS (so that I don't press anything by accident when it is in my pocket).
This seems to be the only really logical way to use device lock. Can this be done?
Regards!
But PocketShield doesn not meet my requirements (see above post). It's just another regular device lock app without the possibility to disable the device lock when the unit is turned on with the power button.
Regards!
I found the Registry-Hack Solution is the better way, just my opinion. But can somebody tell me which reg-value must be edited to avoid locking with end-call button? I don´t want to lock my device in this way, i want to end Data connections with long pressed end-key.
easy
1) scroll along to settings
2) hit 'all settings'
3) select 'personal' tab
4) select 'buttons' icon (top left)
5) get your stylus out
6) on the buttons screen, hit the arrow on the bottom right until you can see the "end key" section. hit that.
7) in the options listed, select "automatically execute selected action" and underneath this select " terminate data connection"
8) hit the OK button (top right) and bob your dads brother, you can now terminate data calls via the long press call cancel key.
nice one.
Thx for that.....
Hi,
Would it be possible for someone here to create an app with the ability to solve the "only power-button activates the lock screen after standby" issue?
I'm thinking that this would be something a lot of Desire owners would see come in handy.
I would look into it myself, but not being a developer by profession my coding skills are zero. I've tried the app 'No Lock', but it just doesnt do it for me as my Desire wakes up in my pocket with the lockscreen deactivated.
(Couldn't find another thread regarding this, so forgive me if it's already been posted before.)
Br,
David
DPE said:
Hi,
Would it be possible for someone here to create an app with the ability to solve the "only power-button activates the lock screen after standby" issue?
I'm thinking that this would be something a lot of Desire owners would see come in handy.
I would look into it myself, but not being a developer by profession my coding skills are zero. I've tried the app 'No Lock', but it just doesnt do it for me as my Desire wakes up in my pocket with the lockscreen deactivated.
(Couldn't find another thread regarding this, so forgive me if it's already been posted before.)
Br,
David
Click to expand...
Click to collapse
There is an app already called "myLock" which has an advanced mode that allows you to double press any button to unlock the screen, just don't use it with the HTC pattern lock as it messes up.
+1 for this.
Btw, you can try LockBot. It is neat, but the disadvantage is that once you get a call, the lock deactivates, which is plain irritating. If you are carrying your cell in your pocket and you receive a call, it might happen that not only the call gets answered/rejected but it can start dialing some random numbers as well! has happened to me once.
So its not perfect, but it works ok.
I just hated pressing the power button every time i had to unlock the phone.
Thanks. This is actually a usefull tool, and does the job well. However, i'd still like a tool that lets me choose a specific button for activating the unlock slider screen, as id like to keep the slider.
But thanks for the advice.
---------------------------------
Sent via the XDA Tapatalk App
EroThraX said:
There is an app already called "myLock" which has an advanced mode that allows you to double press any button to unlock the screen, just don't use it with the HTC pattern lock as it messes up.
Click to expand...
Click to collapse
I've been using myLock for a few days now and updated this morning. I don't see the advanced features.
It's under mode select for me, press where it says auto unlock.
I believe this is what you want.
I press the menu button to wake up the phone, and menu or slide to unlock it.
myth1001 said:
I believe this is what you want.
I press the menu button to wake up the phone, and menu or slide to unlock it.
Click to expand...
Click to collapse
Thanks...
Still, would'nt it be great with an app to do this!
myth1001 said:
I believe this is what you want.
I press the menu button to wake up the phone, and menu or slide to unlock it.
Click to expand...
Click to collapse
I believe this would work only if your phone is rooted?
Hell yes!
After a few hours trying to uncover the dialing code string for the Fascinate, I finally figured it out!
I've dug into *almost* all the AndroidManifest.xmls to compose a list of hidden menus you can gain access to.
I shouldn't have to say it, but I will..
I'm not responsible if you brick your phone.
Play with these things at your own risk.
Even if I said it's been tested by me and confirmed to work.
It's not my fault if your phone takes a crap on you.
Make a backup of your phone.
I will be doing some more testing and will uncover more hidden menus, but this is what I have for now..
Some members of another forum where having trouble using these codes and I've discovered that you need Hiddenmenu enabled. To enable Hiddenmenu, do the following:
Go into the Dialer and enter *#83786633 then press the Home key
Go back into the phone dialer and enter *#22745927
Now a box will come up asking for the SPC code. Enter 000000
Press the Hiddenmenu Enable radio button.
Now you can use these codes.
The dialing code string you have to use is *##
Here are some things you can gain access to
Audio Tuning
*#28346#
Several audio tuning menus.
I've only tested the two items below:
To silence boot and shutdown audio go to Situation/BOOTSOUND and turn the values to 0. I've tested and confirmed this works.
To silence the volume key audio when turning the volume up/down go to Situation/VOLUMEKEY and turn the values to 0. I've tested and confirmed this works.
Full Bat Popup
*#3844228#
This allows you to disable the full battery pop-up.
I have tested this and it works successfully.
HwCodec
*#0002*28346#
Audio path volume controls. Most importantly, it looks like there's a sidetone adjustment.
I have not tested any of these items yet.
Shutdown
*#7594#
This enables you to shut your phone off by long-pressing the power/lock key.
No more pop-up confirmation.
I have tested this and it works successfully.
I also need to point out that this disables your slide lock screen.
Diag/Testing Mode
*#4636*1111#
Does this allow us to change intricate GPS settings, ala the "GPS fixes" for the earlier Galaxy S models?
Or is that not an issue with the Fascinate?
Sent from my SCH-I500 using XDA App
egg_head said:
Go into the Dialer and enter *#83786633 then press the Home key
Go back into the phone dialer and enter *#22745927
Click to expand...
Click to collapse
This isn't working for me. Nothing happens after I do this.
I enter the first string, press home, press dialer, the first string is still there and I enter the second string. Nothing happens.
BTownTKD said:
Does this allow us to change intricate GPS settings, ala the "GPS fixes" for the earlier Galaxy S models?
Or is that not an issue with the Fascinate?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
You can gain access to a GPSSetup menu using this short code-
*#1472365#
The settings are set to the "fixed" values by default.
You don't need to change anything.
You can go into Command and then start GPS and force a satellite lock.
There's other cool info there too.
[tapatalk on android]
DeezNotes said:
This isn't working for me. Nothing happens after I do this.
I enter the first string, press home, press dialer, the first string is still there and I enter the second string. Nothing happens.
Click to expand...
Click to collapse
After pressing Home and entering back into the dialing, clear the first code and enter the second.
I will update the directions to include that.
[tapatalk on android]
awesome that you figured out how to enable secret menus...now how do we enter into diag mode? i wonder what code that is. i tried 8778 but that didnt work out
*#7594#
If your enable this, it appears to not only shutdown your phone with a long press of the power key, but it also disables your lock screen (puzzle/glass screen).
[tapatalk on android]
flam253 said:
awesome that you figured out how to enable secret menus...now how do we enter into diag mode? i wonder what code that is. i tried 8778 but that didnt work out
Click to expand...
Click to collapse
Still trying to figure that out..
[tapatalk on android]
egg_head said:
After pressing Home and entering back into the dialing, clear the first code and enter the second.
I will update the directions to include that.
Click to expand...
Click to collapse
Thanks! That worked.
flam253 said:
awesome that you figured out how to enable secret menus...now how do we enter into diag mode? i wonder what code that is. i tried 8778 but that didnt work out
Click to expand...
Click to collapse
Is this what you're looking for?
*#4636*1111#
[tapatalk on android]
Nice work. Standing by for more codes
Should be a Sticky
Title says it all.
Thx works great All these other ppl having errors are just dummy's
billakid said:
Thx works great All these other ppl having errors are just dummy's
Click to expand...
Click to collapse
The proper spelling is "dummies. " Using an apostrophe-s shows ownership. Dummy.
Do you have the code for the menu to change the vocode.
kamileon said:
Do you have the code for the menu to change the vocode.
Click to expand...
Click to collapse
Still haven't come across this yet.
This cracks me up. Finding all this secret crap I didn't even know existed. You guys rock
My phone made words....
Sweet, now I can disable that VERY annoying battery full popular message.
Sent from my SCH-I500 using XDA App
ivorycruncher said:
Sweet, now I can disable that VERY annoying battery full popular message.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
It looks like the message goes away, but the screen still turns on when the battery is full. I love how bright the screen is, but even at the lowest setting this phone can light up an entire room.
Thank you SO much for including the "disable battery full popup". That thing was annoying as HELL!
Bummer that it turns on the screen, still. Also, I agree that the screen is extremely bright, even with "night mode" in the Desk Cradle app. I'd like it if I could decrease the "minimum brightness" value even more, so I could use this phone + cradle as my alarm clock replacement.
Way to go egg_head!
Slightly wet the button area, now the home button keeps triggering non stop. Everything else works fine.
Ive tried the following solutionsb
https://forum.xda-developers.com/oneplus-2/general/guide-oneplus-2-home-button-dead-t3324321
Phone is currently sitting in a bag of rice so let's see how that goes.
Meanwhile, can anybody think of a way to disable the home button (perhaps through terminal or something)? Because the phone would basically be usable.. I know there are button settings, so if only I could somehow put home button as "no action".
sl___ said:
Slightly wet the button area, now the home button keeps triggering non stop. Everything else works fine.
Ive tried the following solutionsb
https://forum.xda-developers.com/oneplus-2/general/guide-oneplus-2-home-button-dead-t3324321
Phone is currently sitting in a bag of rice so let's see how that goes.
Meanwhile, can anybody think of a way to disable the home button (perhaps through terminal or something)? Because the phone would basically be usable.. I know there are button settings, so if only I could somehow put home button as "no action".
Click to expand...
Click to collapse
Just ON " Enable on-screen nav bar " in settings>butons
and OFF " Always enable menu button " in settings>butons.
tbiwalkar said:
Just ON " Enable on-screen nav bar " in settings>butons
and OFF " Always enable menu button " in settings>butons.
Click to expand...
Click to collapse
The thing is the constant pressing of home button makes me not able to navigate anywhere.
The only place I can actually do something is in recovery, because the home button doesn't actually do anything.
If there's a way I can enable it in terminal in recovery mode that would be great.
sl___ said:
The thing is the constant pressing of home button makes me not able to navigate anywhere.
The only place I can actually do something is in recovery, because the home button doesn't actually do anything.
If there's a way I can enable it in terminal in recovery mode that would be great.
Click to expand...
Click to collapse
what rom are you on? maybe someone on same rom can pull his build.prop and use qemu string to enable nav bar and u can push it in using twrp
tbiwalkar said:
what rom are you on? maybe someone on same rom can pull his build.prop and use qemu string to enable nav bar and u can push it in using twrp
Click to expand...
Click to collapse
Thanks for the idea. I'm using resurrection remix - will ask somebody on the thread. What does qemu string mean?
tbiwalkar said:
what rom are you on? maybe someone on same rom can pull his build.prop and use qemu string to enable nav bar and u can push it in using twrp
Click to expand...
Click to collapse
Nevermind, I figured out how to enable on screen nav, but I need a way to disable the hardware buttons..
Edit: figured it all out!
sl___ said:
Nevermind, I figured out how to enable on screen nav, but I need a way to disable the hardware buttons..
Edit: figured it all out!
Click to expand...
Click to collapse
Hope the moisture dries out and your fingerprint reader starts working normally
Tip of advice for everyone who has problems with the fingerprint reader after it got wet or started to get crazy for any weird reasons at all.
Drain the phone battery until it dies. Then try to boot it up to drain even the last power in it.
Then recharge the phone.
By draining the battery and recharghing it you reset the phone's sensors.
Be lucky some of you aren't living in a country like me where the weather is moist all the time. I had to do this method thrice this week ??
Sent from my ONE+² using Tapatalk⁴
So I'm coming from a pixel where I would get my app notifications to wake and show on my lock screen. When I get an email for example, I get the sound and mynlight will blink but my screen doesn't wake up and show anything til I press the power button.
How can I get them to show without having to press the power button??
Yes, I'd like to know how to do this too! Any ideas anyone?
Currently, the best I can see is that my 'always on screen' will show a small icon to indicate there's a new notification (an email icon for example). Though it does not flash or light up. The icon just displays very discreetly so really you have to look for it. I then need to tap the home button, which reveals the 'pin entry screen'... on this screen I tap the 'back' arrow which displays the full notification. So its two tap to reveal notifications without unlocking the phone.
What I really want is to see notifications flash up on my lock screen before I choose to swipe open the app (using PIN etc). For that reason, face recognition also isn't great as the phone opens past the notifications screen the moment you look at it!
Have just moved from an iphone. currently this is the only real con, otherwise amazing upgrade!
Did anyone figure this out?
mpetruzz said:
So I'm coming from a pixel where I would get my app notifications to wake and show on my lock screen. When I get an email for example, I get the sound and mynlight will blink but my screen doesn't wake up and show anything til I press the power button.
How can I get them to show without having to press the power button??
Click to expand...
Click to collapse
It isn't probably answering your question, but might help. I don't know if you have set a setting under: settings>display>navigation bar and then check out "unlock with home button", it will at least not require you to press power button, but just a home button. I just press home button and it shows my lock screen and any notifications I may have.
1) So when you set unlock with home button to ON, then your phone will go straight to home screen(if phone isn't locked with a code) when you press this home button.
2) If you turn off that feature, then, when you press home button, then your phone will show lock screen first regardless if your phone is locked or unlocked.
Hi,
I'd also like to have my s8 screen to wake upon receiving notifications (whatsapp messages, emails, etc).
I switch off the AOD feature and would love to see a preview of notifications when i receive them without having to reach out for my phone.
Coming from the iphone, I'm so used to just glance at it and see if its an important message or something that can wait. I find this feature very well executed.
The s8 requires me to manually turn on the screen.
Any info? I'm pretty sure its not hidden somewhere in Settings... Probably can't even do this without root or installing additional apps.
Thanks
I have found an easy solution. Simply download and install this app from the playstore.
https://play.google.com/store/apps/details?id=de.nullgrad.glimpse
Good luck.
thehaXor said:
I have found an easy solution. Simply download and install this app from the playstore.
https://play.google.com/store/apps/details?id=de.nullgrad.glimpse
Good luck.
Click to expand...
Click to collapse
Thanks man, that was really fast. Just installed and did a quick test, works like a charm.
I hope there's no issue running this app
Thanks again, super useful!
thehaXor said:
I have found an easy solution. Simply download and install this app from the playstore.
https://play.google.com/store/apps/details?id=de.nullgrad.glimpse
Good luck.
Click to expand...
Click to collapse
I knew there was an app somewhere that will do this! Thank you!
Since the Oreo update I used a similar app called "Screen Notifications" which woke the screen on notification, however no longer works since the update.
Anyone got a work around?