after last update my led case my case lights but leds open in different spots ..... cant make normal symbols .... any fix?
This is the hour when i close the case
A photo which suppose to be the hour when i close the case
Looks like clock from the Predator's wrist
wandro3d said:
Looks like clock from the Predator's wrist
Click to expand...
Click to collapse
its telling you to get to the chooppaaaaaa
I paid so much money for those cases and they stopped working from a update... need help to make them work again the phone is not the problem i did reset it...but nothing mabe the cases have i softwear that they make them work .the case have no hardware problem
renaultmaniac said:
I paid so much money for those cases and they stopped working from a update... need help to make them work again the phone is not the problem i did reset it...but nothing mabe the cases have i softwear that they make them work .the case have no hardware problem
Click to expand...
Click to collapse
just return them and ask your money back, as obviously they are broken but not by you, they should refund you in full.
Did you try to delete the data of the LED-cover app?
Yes tried it all....
Related
Hi there, my phones screen will not work, my friend kept opening and closing they keypad quickly after which he gave me the phone back and the screen did not work!
The problem im having is that the touch screen dont work, nothin else is wrong, the screen is not cracked, jus that it dont touch sceen no more.
The bad thing is I put it on boot mode and erased the phone memory, and since the touch screen dont work i can allign the cross thing.
Does anyone know a way in which i could fix this?
Cheers.
pod8 said:
Hi there, my phones screen will not work, my friend kept opening and closing they keypad quickly after which he gave me the phone back and the screen did not work!
The problem im having is that the touch screen dont work, nothin else is wrong, the screen is not cracked, jus that it dont touch sceen no more.
The bad thing is I put it on boot mode and erased the phone memory, and since the touch screen dont work i can allign the cross thing.
Does anyone know a way in which i could fix this?
Cheers.
Click to expand...
Click to collapse
Mmmm. Tricky perhaps. A hard reset will either cure or leave you stuck. If you hard reset and the screen is indeed dead (touch wise) then you'll never get past the alignment stage. If the touch issue is software related then you would be sorted with the hard reset.
A gamble I think!!
However you are stuck at the moment so in a sense you have nothing to lose. If it ends up being useless then you are faced with a warranty (hopefully) repair otherwise some DIY though it's not entirely obvious what has broken/come loose - possibly just a ribbon connector.
Mike
Maybe the ribbon cable came loose on the LCD side?
myztikal47 said:
Maybe the ribbon cable came loose on the LCD side?
Click to expand...
Click to collapse
Yeah i think its that as well, i hard reseted it a few times with no effect, in the begining of the day, it could still reconise the screen taps around 2/3 times before it totally went dead.
Are there any tutorials on how to open it up to check the ribbon?
Thanks.
This maybe the hardware problem with the mainboard itself. I read about this on here a few times, most people had the get their phones exchange....
myztikal47 said:
This maybe the hardware problem with the mainboard itself. I read about this on here a few times, most people had the get their phones exchange....
Click to expand...
Click to collapse
Yes, I am equally unsure that this is just a simple loose connector. It may be, but it appears to be fine for a short while and only then goes off.
Like you myztikal47, I suggest going for warranty replacement if at all possible. Only if you have no warranty shuld you attempt a repair yourself - this is a notoriously ellusive fix and indeed I would say there is no 100% works for all answer. Certainly do not assume it's the screen - most probably it isn't and you'll waste your money.
There are dismantling links in this forum - but you'll find them on my small Hermes site http://michael-channon.spaces.live.com- go to the loose keyboard section and you'll see the links.
Mike
my 8525 had the same exact problem, and i swapped the LCD and still doess the same thing...
I dont know what the problem could be, and i dont have a warranty.
What could be going on????
Any 1 know where 2 find the service manual????
Jorge
[email protected]
mikechannon said:
Yes, I am equally unsure that this is just a simple loose connector. It may be, but it appears to be fine for a short while and only then goes off.
Like you myztikal47, I suggest going for warranty replacement if at all possible. Only if you have no warranty shuld you attempt a repair yourself - this is a notoriously ellusive fix and indeed I would say there is no 100% works for all answer. Certainly do not assume it's the screen - most probably it isn't and you'll waste your money.
There are dismantling links in this forum - but you'll find them on my small Hermes site http://michael-channon.spaces.live.com- go to the loose keyboard section and you'll see the links.
Mike
Click to expand...
Click to collapse
Ok my best bet is to take it to carphone, i got my screen replaced there a few months ago, think i still have a 1 year warrenty
Thanks for all your help anyways
Tytn Service manual
jblandon1024 said:
my 8525 had the same exact problem, and i swapped the LCD and still doess the same thing...
I dont know what the problem could be, and i dont have a warranty.
What could be going on????
Any 1 know where 2 find the service manual????
Jorge
[email protected]
Click to expand...
Click to collapse
Here you can found the manual
http://www.megaupload.com/?d=0GD472TP
Roby
Hi Guys!
My TyTn is acting strangely. In use, the display is first pixelating, getting lines (noise pixels as well), and then fading to completely white. When so it doesn't responde to anything anymore. So a soft reset is needed.....
Also the ringtone when called, is 'out of tune', like a old record player when you push your finger on the record.. LOL
Before I send it back to have it fixed by HTC, do you guys have any idea whats wrong, and maybe even a tip to help me fix this myself?
Tried numerous soft resets, hard reset, and a reinstall of the original WM6 rom (in Dutch).
Did not install any new programs lately, or did change anything on the unit...
Don't want to miss my TyTn... so hate to send it away... as many of you I am hooked badly to my beloved digital companion
Greetzz Antal
It acts like hardware incompatible.
How about flashing with WM6 English version.
I don't think it is software problem.
I agree, not likely to be software. It did not get dropped or take a knock did it?
The two issues of pixelation/white screen may, if you are lucky, just be a connector thats loose. The sound I think is unrelated but again sounds like a poor connection at the white rear speaker connector block - not uncommon.
Both of the above could be caused by a sharp knock. There have also been cases of poor battery connections causing problems.
If you have a warranty use it. If not you can follow the dismantling guides or service manual to dismantle - check connections and re-assemble. Be prepared though, that sending it in might still be required!!
Mike
Will send it in
Hi Guys, Thanks fr your replies.
I will take the unit back to the store today.
I am not aware that I bumped it, or neither it has dropped. May be a connection that was allready quite loose to begin with. Lets see what HTC and the store will tell me
Strange thing is, that without my sim in it, and not using it, it stays normal... Have put it aside, and used a very old phone instead, and it is still normal..
Antal said:
Strange thing is, that without my sim in it, and not using it, it stays normal... Have put it aside, and used a very old phone instead, and it is still normal..
Click to expand...
Click to collapse
Mmmm... that's important information and changes things a bit. Could be a sim card contact or something about the sim. Anyway it tends to suggest that other thoughts about hardware issues may not be correct!
Hope you find the answer at the store.
Mike
Hello to all,
I have a HTC 3600 with the rom “Karmba_a 7.2 eLiAs EN-20000” for a long time and everything was working great, until last Friday when it stop vibrating as it was suppose to do when receiving a call.
After trying lots of things I decided to reflash it. And it’s still the same, does not vibrate.
Does anyone have any idea what might be the problem?
Thanks in advance
try change motor vibretor or see if there are humidity in bord neer the contact. it´s an easy operation
enduromen said:
try change motor vibretor or see if there are humidity in bord neer the contact. it´s an easy operation
Click to expand...
Click to collapse
Changing motor vibrator needs to go to repair.
How can see bord to see if there is humidity? Does not look like a easy operation.
blitz.pt said:
Hello to all,
I have a HTC 3600 with the rom “Karmba_a 7.2 eLiAs EN-20000” for a long time and everything was working great, until last Friday when it stop vibrating as it was suppose to do when receiving a call.
After trying lots of things I decided to reflash it. And it’s still the same, does not vibrate.
Does anyone have any idea what might be the problem?
Thanks in advance
Click to expand...
Click to collapse
it may cause of the loosen screw which stick the vibrator with the phone. I have this happen before, you can try open the case and screw it back or take to some repair shop.
ctrlaltdel said:
it may cause of the loosen screw which stick the vibrator with the phone. I have this happen before, you can try open the case and screw it back or take to some repair shop.
Click to expand...
Click to collapse
That was it! Everything is working fine again.
Thank you enduromen and ctrlaltdel.
Well, I'm having the same problem again, sometimes vibrate, sometimes don't.
And I can hear something loose inside the phone maybe it's the screw that stick the vibrating motor.
Can anyone tell me if there is a tutorial for opening the phone and check that out?
Thanks in advance
please me too ..it stoped vibrate
is there any topic can help how to open the cover and refix it
thanks
astroganger said:
please me too ..it stoped vibrate
is there any topic can help how to open the cover and refix it
thanks
Click to expand...
Click to collapse
take a look
unscrew (inside trinity 1.jpg; screw circled with red) and open the cover, then you will see the vibrator and the screw that stick the virbator with the MB (inside trinity 2.jpg; circle with red). Screw it back and done.
ctrlaltdel said:
take a look
unscrew (inside trinity 1.jpg; screw circled with red) and open the cover, then you will see the vibrator and the screw that stick the virbator with the MB (inside trinity 2.jpg; circle with red). Screw it back and done.
Click to expand...
Click to collapse
Thanks a lot ctrlaltdel for your explanation.
Cheers
thanks alot ctrlaltdel
i will try it ...
wow great help...
I have a similar situation... not vibrate, but with the mic of my handset... is there a similar solution for me to perform checks??
Thanks for your help!
i think u should flash ur rom again..
..try first
amios said:
i think u should flash ur rom again..
..try first
Click to expand...
Click to collapse
Thanks for the suggestion
I've tried flashing a new rom, as well as trying a different headset... same deal
(I however haven't tried if those headsets work with other phones... so I'll try to do that next to make sure I'm not unlucky to the point where both mics dead)
Had a similar problem today--erratic vibrating and occasional strange noises. Thought it was the ROM that I had just reflashed but thankfully stumbled onto this thread - it was the very loose screw! Thanks for the advice.
Just to add a little levity, here's a solution that you probably didn't think of and most likely wouldn't have thought you needed. But... it's a funny idea, nonetheless...
http://teknoraver.campuslife.it/software/mpfl/
thanks a lot...!!!
My trinity also stoped vibrating.
Same here, and fixed it now.
Thanks astroganger for asking this question.
And everyone how answered
what kind of tool did you use for the screws?
ctrlaltdel said:
take a look
unscrew (inside trinity 1.jpg; screw circled with red) and open the cover, then you will see the vibrator and the screw that stick the virbator with the MB (inside trinity 2.jpg; circle with red). Screw it back and done.
Click to expand...
Click to collapse
One word of warning: There's also another screw under the stylus. Don't forget that one when you dissasemble or it might break.
schraalmans said:
what kind of tool did you use for the screws?
Click to expand...
Click to collapse
The tool needed can be bought at most electronics stores, ie: Radio Shack, etc...
It is a #6 Torx driver. Also called T6 Might find it at Auto Parts store, but not sure, it's pretty small...
It seems the stopped vibration is almost always the loose screw. Mine fell completely out and was wedged against the vibrating motor, stopping it's rotation. After the phone was open, it was an easy fix.
Hey i don't know what happened to my Wizard but suddenly after installing two Alarm Clock softwares i just started losing my Screen Alignment. To fix it i even tried re flashing my Wizard but this time the problem started early and without installing those programs. Did anyone of you have the same problem?? If you do have a patch do post it in reply. Cause after using the ROM I'm using now all the other ROMs seem to be too Slow.
NOTE: Information about my Wizard is updated and in my signature.
Thanks in Advance.
HI,
Have you ckecked the connection between the screen and the print? Maybe it has a bed contact?
If you still have warranty, the you better send your phone back to let it repair
good luck
jordyk said:
HI,
Have you ckecked the connection between the screen and the print? Maybe it has a bed contact?
If you still have warranty, the you better send your phone back to let it repair
good luck
Click to expand...
Click to collapse
Hey im sure that there are no problem with the HARDWARE cause if there were problems with the hardware then it should not even work after i align screen and secondly if you know any ROM faster than mine (mentioned in my sign) cause when i switch to nayother ROM they seem to be too slow.
xda2_haseeb said:
Hey im sure that there are no problem with the HARDWARE cause if there were problems with the hardware then it should not even work after i align screen and secondly if you know any ROM faster than mine (mentioned in my sign) cause when i switch to nayother ROM they seem to be too slow.
Click to expand...
Click to collapse
hi,
but you said that you heve the problem with all the roms, isn't it? so then it must be a hardware problem?
xda2_haseeb said:
Hey im sure that there are no problem with the HARDWARE
Click to expand...
Click to collapse
Well there's your problem right there. Anyone that sure of anything can't be right about it.
Seriously though. This sounds like an intermittent fault, and that is the domain of hardware failures. This kind of thing happens when hardware ages. Especially around things with moving parts. That slide-out keyboard wreaks havoc on the ribbon over time, and eventually, they just give out. You may have one that's merely loose, or it may be getting ready to break, or it may already be broken and just touching often enough to make you think it's okay.
The chances of this being firmware or driver-related are really slim. If that was the case, the error would be constant, not intermittent.
Myrddin Wyllt said:
Well there's your problem right there. Anyone that sure of anything can't be right about it.
Seriously though. This sounds like an intermittent fault, and that is the domain of hardware failures. This kind of thing happens when hardware ages. Especially around things with moving parts. That slide-out keyboard wreaks havoc on the ribbon over time, and eventually, they just give out. You may have one that's merely loose, or it may be getting ready to break, or it may already be broken and just touching often enough to make you think it's okay.
The chances of this being firmware or driver-related are really slim. If that was the case, the error would be constant, not intermittent.
Click to expand...
Click to collapse
hey i guess that SLIM chance has won i installed another ROM (http://forum.xda-developers.com/showthread.php?t=367375) Its been a day and its working f9.
jordyk said:
hi,
but you said that you heve the problem with all the roms, isn't it? so then it must be a hardware problem?
Click to expand...
Click to collapse
Sorry! but i dont guess i said that anywhere by reflashing i meant reflashing the same ROM. If the problem still presists then it might be a HARDWARE fault but for now its working pretty fine.
Forgot one thing, if this is an HARDWARE issue then is it fixable?? if yes how?
hey man i had this annoying issue whenever i remove the battery..but it should be OK when u do alignment a couple of time repeatedly...try it and post the results here..
I have had alignment problems for a long time. Clearly mine is hardware related, since stock and custom ROMs both show the same problem. Sometimes I'll go for months with no problem, and then I'll have to start realigning several times a day. Thank god for smartskey, otherwise I could rarely close a program. I was told that it was probably a hardware problem and that it would've been covered under warranty (if I was still under warranty), but I never sent it off. Somebody else told me once that It was probably due to there being pressure put on the edges of the screen from the frame around the screen, and if I disassembled it, made sure the seal/padding wasn't touching the touch-sensitive part and then reassembled it, I should be fine. But I looked up the process in the service manual, and WOW it looked like a lot of work with a lot of places where I could screw up the phone, so I just live with it. Sometimes sliding it open and closed would totally mess it up. It seems to help if I just squeeze the edges of the screen to really "seat" it, and then align. Then it seems to stay pretty well aligned for a good while. Good luck!
I cooked up a ROM and installed it and it works now i dont have the problem. Please try my ROM and give me feedback link to it exists in my signature. Thanks. TC
http://www.youtube.com/watch?v=uQ7csMbeQDA
The device screen doesn't react on pressings after running for some time, mostly running some more demanding application, in my case as seen in the video clip, a 3d game. The center-left part of the screen just won't answer to my touches, to get it more clear I've made a clip.
P.S.
The phone was bought in Romania (Eastern Europe), had been in service one time, seems all they've done is to resoft the phone.
Are you having a leather case or something that wraps over the side and front of the Leo? I can't see clearly but it seems so.
alex fung said:
Are you having a leather case or something that wraps over the side and front of the Leo? I can't see clearly but it seems so.
Click to expand...
Click to collapse
nope, I don't -the stock leather pouch is between the table and device
Have you tried hard resetting the phone? backup all your data and hard reset.
anaadoul said:
Have you tried hard resetting the phone? backup all your data and hard reset.
Click to expand...
Click to collapse
I did that (even in my video if you watch it); Updated to the latest firmware available on htc, same stuff.
P.S.
this issue appears mostly when I press the reject (power) button, so it's smth. with lower right corner...
I don't see why there's a discussion or even a post about this. The phone is obviously faulty. You say yourself that it's not a software issue so you need to take it up with your supplier. If they've already had it once and sent it back in the same state then you need to tell them that, not us!
They got to replace it. It's unusable in that state and no amount of software or tweaking will make the screen suddenly work for you.
i think the easies way is to send it for repair,
if i were you, i would do my best to identify the problem cause and be able to reproduce it whenever i want so i can go there to HTC and prove it.
johncmolyneux said:
They got to replace it. It's unusable in that state and no amount of software or tweaking will make the screen suddenly work for you.
Click to expand...
Click to collapse
Thank you for your reply, too bad the servicemen don't share this opinion, and the thing is more complicated due to the fact that I live in other country and have to ask some ppl to get the device delivered, and due to the random nature of the problem, it is really complicated;
the meaning of this thread was to identify, maybe someone has met such things, and knows what exactly causes the fault, so I don't receive the device the second time with "resoft" written on the service ticket...
anaadoul said:
i think the easies way is to send it for repair,
if i were you, i would do my best to identify the problem cause and be able to reproduce it whenever i want so i can go there to HTC and prove it.
Click to expand...
Click to collapse
that's exactly what I'm trying here - to identify the problem and get some proof, I can't go there by myself, we don't have an official HTC service - the nearest one is in Romania