Hello. I have two weird problems with my assotu head unit mounted in my 2018 seat toledo. #Aliexpress RON 888.37 57%OFF | Asottu VW301 android 9.0 PX30 car dvd gps navigation for skoda for vw golf 6 7 polo tiguan passat b6 b5 gps player car
https://a.aliexpress.com/_dW4IRG6 this is my navigation and here are two links on YouTube explaining the problem. https://youtu.be/3c05gMThh00 and https://youtu.be/3c05gMThh00 Basically when I connect my phone to the navigation via Bluetooth, and try to play some music, it auto pauses, and in my cockpit, behind the steering wheel, it doesn't show that I am connected to any phone. But if I hit Bluetooth music on the tablet, it automatically works.*
* * *The other problem is the fact that the navigation starts in the Bluetooth app, and every time I put the car in reverse, no matter what app I am in (like waze or YouTube etc) when I take it out from reverse, it automatically goes to the Bluetooth app. Attached to this email I have 2 videos showing this problem. Please help me fix it. Regards.*
Related
Hi everyone,
i have tried searching for a compatible unit for a while now, but still unsure which one i can use for my needs.
Basically i would like a 2 din android head unit for my seat ibiza 6L2 from 2007.
Which has the basic functions like navigation, bluetooth phone connection, radio, music player, etc.
But most importantly i want to use Torque on it and if possible simultaneously connect the phone via bluetooth
DVD player is not needed and i do not have any buttons on the steering wheel.
Could anyone advise me on this??
Good afternoon,
Hi need help with my headunit, I Have an Audi A4 b6 and seems the canbus stopped working.
Yestarday when I left the car in my garage, the heaunit was working, but this mornig when I get to the car the same started with the car but doesn't have sound, radio, music, volume,it seems that configuration won't save. I have access to factory configs but the selections I make on canbus aren't saved...
I made this video to the seller, I have the radio working about a year more or less
Does anyone have ideas
Hi all,
I know this isn't a car forum, but car forums usually aren't android forums
I'm entering the world of Android HUs, after spending the last 5 years in the world of android media units.
Recently bought an Eonon GA453B - let me know if you want system info etc.
Only seems to run when I bypass the CANBUS connector for power.
Steering wheel controls work, and the HU picks up doors open, battery voltage etc.
But I need to connect two wires together that bypass the CANBUS and therefore the HU to powered on ALL the time, draining the battery over a few days.
I can even walk past my car, and my phone connects to its Bluetooth.
I have a VW passat r36 (b6), and the OEM headunit works fine.
Any ideas?.
Thanks a lot.
Looking for a head unit for my 2009 Ford fiesta but I'm a bit confused to what I should buy as there are so many options, anyone have any advice to what I should buy
Looking at these
#Aliexpress ￡101.04 50%OFF | OKNAVI for Ford Fiesta 2009-2017 Car Radio Android 9.0 2 Din 9 Inch Multimedia Stereo Navigation GPS Car DVD Player Bluetooth
https://a.aliexpress.com/_BSDfh0
#Aliexpress ￡196.06 30%OFF | EKIY 9" IPS DSP Android 9.0 Car Radio Stereo Multimedia For Ford Fiesta 2009-2017 Auto GPS Navigation 4G Carplay BT Video Player
https://a.aliexpress.com/_B0cc7C
#Aliexpress ￡251.33 20%OFF | Android 10 Car DVD Player For FORD Fiesta 2008-2017 GPS Navigation 2 Din Car Radio Multimedia WIFI Stereo IPS Headunit RDS
https://a.aliexpress.com/_BUnG30
Any thoughts
Sent from my SM-A920F using Tapatalk
Anyone
Sent from my SM-A920F using Tapatalk
Dear All
Good evening
I am a newbie here, I would like to ask about if there is any ROM or software interface that I can flash it on my TV box or Raspberry PI 4 so that I can be able to connect these device USB to Car USB to mirror everything from these devices on my Car touch screen. My car is equipped with Android Auto and Apple Car Play. I have seen a device it is called SMART WE chinese made it is like MMB but it has GPS, SIM card and it can connect directly to Car USB.
Hi All,
My brother just purchased an all-in-1 9" Android head unit + facia for his 2005 Mazda 6 (GG). Listing can be seen here:
9" Android Car Stereo Non-DVD Player GPS Media For Mazda 6 Atenza GG AU 02-08 | eBay
Find many great new & used options and get the best deals for 9" Android Car Stereo Non-DVD Player GPS Media For Mazda 6 Atenza GG AU 02-08 at the best online prices at eBay!
www.ebay.com.au
He has installed the unit and everything works fine while the car's ignition is only turned to accessories. However, as soon as he turns the car key 1 click further to power up the ignition (but the not has not yet started), the steering wheel controls go nuts. That is, once the key is turned to ignition, it's like one of the steering control buttons is constantly being pressed and the head unit either continually skips through songs or it continually skips through tuning radio stations, depending on whether the unit is set to playback songs or to the radio. Curiously, this problem doesn't occur when only the accessories are powered on (ignition not yet powered on).
The details of his unit are shown in the attached image. He currently has the steering wheel controls disconnected due to the issue, which I'm guessing is why the unit shows "Ruishengwei-Mazda6--disconnect".
I did some searching but didn't find anyone else reporting this issue. Anybody have any insights as to what might be the issue? If so that would be greatly appreciated.
J0NS said:
Hi All,
My brother just purchased an all-in-1 9" Android head unit + facia for his 2005 Mazda 6 (GG). Listing can be seen here:
9" Android Car Stereo Non-DVD Player GPS Media For Mazda 6 Atenza GG AU 02-08 | eBay
Find many great new & used options and get the best deals for 9" Android Car Stereo Non-DVD Player GPS Media For Mazda 6 Atenza GG AU 02-08 at the best online prices at eBay!
www.ebay.com.au
He has installed the unit and everything works fine while the car's ignition is only turned to accessories. However, as soon as he turns the car key 1 click further to power up the ignition (but the not has not yet started), the steering wheel controls go nuts. That is, once the key is turned to ignition, it's like one of the steering control buttons is constantly being pressed and the head unit either continually skips through songs or it continually skips through tuning radio stations, depending on whether the unit is set to playback songs or to the radio. Curiously, this problem doesn't occur when only the accessories are powered on (ignition not yet powered on).
The details of his unit are shown in the attached image. He currently has the steering wheel controls disconnected due to the issue, which I'm guessing is why the unit shows "Ruishengwei-Mazda6--disconnect".
I did some searching but didn't find anyone else reporting this issue. Anybody have any insights as to what might be the issue? If so that would be greatly appreciated.
Click to expand...
Click to collapse
What did the reseller suggest when contacted for after sales support.
marchnz said:
What did the reseller suggest when contacted for after sales support.
Click to expand...
Click to collapse
My brother has sent a message to the seller querying about the steering wheel control issue, but no response yet, unfortunately.
Okay, good news. My brother managed to sort the issue. For anybody who has the same problem, here are the details of the fix that worked for him:
Coming from the 9" Android headunit there's a wire called 'Key 1'. This Key 1 wire needed to be connected to the red/blk wire of the Mazda's headunit wiring harness.
I should also mention that his Mazda 6 GG has the non-Bose stereo, however, as seen in the attached image, the non-Bose and Bose headunits both have the same red/blk wire.