Good afternoon,
Hi need help with my headunit, I Have an Audi A4 b6 and seems the canbus stopped working.
Yestarday when I left the car in my garage, the heaunit was working, but this mornig when I get to the car the same started with the car but doesn't have sound, radio, music, volume,it seems that configuration won't save. I have access to factory configs but the selections I make on canbus aren't saved...
I made this video to the seller, I have the radio working about a year more or less
Does anyone have ideas
Related
Hi There,
I have an VW Touareg I from Year 4/2008. It is the Facelift Model with CANBUS 2.0
Buy a Erisin 5056T Unit (PX5 / 2 GB) with integrated VW CANBUS Decoding Box (Decoder inside the Radio it´s not external Box).
Inside the Unit i try different Types of CANBUS settings (Default was 1 (VW / Scoda))
I am little Frustrated because of the limit Implementations of decoding CANBUS Signal inside this Unit.
Whats running:
ACC Signal (Radio turn on when i plug IN the Car Key and go into "Sleep Mode" when i pull the Key out.
Steering Wheel Keys: Only Loud / quiet / Phone / Mute keys are running (can´t change any Responsible of keys in the Unit) seems hard coded
Screen for Camera Switching if i switch my gear into Reverse
Whats not running:
NO , really no Data inside the vehicle App.
Reaktion of draw lines for the backwards Camera change/move only when i turn 100% left or Right on the Steering Wheel. And only for millimeters....
Is there any Experience with other Units that can better Communicate with VW Touareg?
Regards
Ben
no one use a Android Car Unit in the Touareg ?
http://backly.ru/go/1f7n
Hi
Thx for response.
Did you have experience with that Unit?
Can the Radio read the Door or/and Park Sensors?
Regard
Ben
ben97 said:
Hi There,
I have an VW Touareg I from Year 4/2008. It is the Facelift Model with CANBUS 2.0
Buy a Erisin 5056T Unit (PX5 / 2 GB) with integrated VW CANBUS Decoding Box (Decoder inside the Radio it´s not external Box).
Inside the Unit i try different Types of CANBUS settings (Default was 1 (VW / Scoda))
I am little Frustrated because of the limit Implementations of decoding CANBUS Signal inside this Unit.
Whats running:
ACC Signal (Radio turn on when i plug IN the Car Key and go into "Sleep Mode" when i pull the Key out.
Steering Wheel Keys: Only Loud / quiet / Phone / Mute keys are running (can´t change any Responsible of keys in the Unit) seems hard coded
Screen for Camera Switching if i switch my gear into Reverse
Whats not running:
NO , really no Data inside the vehicle App.
Reaktion of draw lines for the backwards Camera change/move only when i turn 100% left or Right on the Steering Wheel. And only for millimeters....
Is there any Experience with other Units that can better Communicate with VW Touareg?
Regards
Ben
Click to expand...
Click to collapse
Same here, mine is a px3 android 7.1....... any luck? Have you been able to fix it? My backup diplay works perfectly on ford focus canbus setting....
Hi
Inside the Unit i try different Types of CANBUS settings (Default was 1 (VW / Scoda))#### do you still use this one??
I am little Frustrated because of the limit Implementations of decoding CANBUS Signal inside this Unit.
Whats running:
ACC Signal (Radio turn on when i plug IN the Car Key and go into "Sleep Mode" when i pull the Key out.
Steering Wheel Keys: Only Loud / quiet / Phone / Mute keys ##### mine just rhe volume works.
##### if i press Phone in the stering wheel it just play next sont
####the star key in the wheel does nothing
Can you help?
2006 touareg
Thank you
Hello guys,
I have the exact same problem with a Erisin PX5/4gb/Android 9.0, but I have a Treg from 2005 with Canbus 1.6. I have contacted Erisin, sent them my original wiring diagram and am waiting for their response. in the meantime I have the latest MCU updates, I'll try them today.
Have you tried the Canbus setting VW_TOUAREG(Hiworld) ? For me it doesn't work, but maybe for those of you who have Canbus 2.0 will work.
If I find a solution or I have any news I'll post them here, hope you do the same, maybe we will get this unit to decode all the signals from Can-Bus.
If anyone wants the updates images, just let me know and I'll upload them.
Regards,
O
Hello,
I have an XTRONS PA17GFVPL-LB mounted on Golf 7. When I mounted it all worked correctly. After a few days, the communication with canbus started to work intermittently. So I asked for the replacement of the canbus decoder; which did not solve unfortunately. The xtrons support then asked me to upgrade to MCU GS v2.88, but also this action did not resolve the issue. The strangeness is the following: the radio sends correctly messages via canbus (I can set all the details such as units of measurement, radar sound tone, intensity of lights etc.) but it has some difficulties while receiving messagges (input from the steering wheel buttons and reading values such as temperature or values set above), meaning the "receiving" is intermittent, it works 1 time out of 5. However, in the rare cases the unit works fine, everything is fluid and perfect.
I also tried to unplug the car battery and / or the canbus fuses, hoping it would unlock somehow, but no way.
I tried all 100+ possible canbus combinations in the "factory settings" settings. The only one that works is the "35 Golf 7".
The xtrons unit is not blocked by particular processes, when it works everything is smooth, even with waze and spotify active together.
Xtrons says they do not have a more specific decoder for Golf Mk7 than the one they gave me. Below the link to the pictures of the canbus decoder I'm using, supplied by Xtrons. On Roadnavi.com I found the C257 for golf 7, I think I'll buy it, but I have no clue whether it is compatible with the unit.
Pictures link -> postimg[dot]cc/gallery/p2ue7cxo/
does anyone have any clue?
Thank you
Hi guys,
I recently got back from repair my Dasaita PX5 android head unit (MTCE_HA_V3_10_1). (It broke after 2 days of use, froze during waze installation and never started again)
On my Mitsubishi Lancer I have the rockford fosgate sound system ( 6 speakers+ subwoofer). I have also purchased the Canbus for this model (2011).
I have some issues with the built-in amplifier app, it does not influence the sound (only the loudness option works). The eq menu doesn't work and also the fader seems to do nothing.
Do you know any workaround on this?
Cheers,
Paul
Hello. I have two weird problems with my assotu head unit mounted in my 2018 seat toledo. #Aliexpress RON 888.37 57%OFF | Asottu VW301 android 9.0 PX30 car dvd gps navigation for skoda for vw golf 6 7 polo tiguan passat b6 b5 gps player car
https://a.aliexpress.com/_dW4IRG6 this is my navigation and here are two links on YouTube explaining the problem. https://youtu.be/3c05gMThh00 and https://youtu.be/3c05gMThh00 Basically when I connect my phone to the navigation via Bluetooth, and try to play some music, it auto pauses, and in my cockpit, behind the steering wheel, it doesn't show that I am connected to any phone. But if I hit Bluetooth music on the tablet, it automatically works.*
* * *The other problem is the fact that the navigation starts in the Bluetooth app, and every time I put the car in reverse, no matter what app I am in (like waze or YouTube etc) when I take it out from reverse, it automatically goes to the Bluetooth app. Attached to this email I have 2 videos showing this problem. Please help me fix it. Regards.*
Hi all,
I know this isn't a car forum, but car forums usually aren't android forums
I'm entering the world of Android HUs, after spending the last 5 years in the world of android media units.
Recently bought an Eonon GA453B - let me know if you want system info etc.
Only seems to run when I bypass the CANBUS connector for power.
Steering wheel controls work, and the HU picks up doors open, battery voltage etc.
But I need to connect two wires together that bypass the CANBUS and therefore the HU to powered on ALL the time, draining the battery over a few days.
I can even walk past my car, and my phone connects to its Bluetooth.
I have a VW passat r36 (b6), and the OEM headunit works fine.
Any ideas?.
Thanks a lot.