Hi guys,
I recently got back from repair my Dasaita PX5 android head unit (MTCE_HA_V3_10_1). (It broke after 2 days of use, froze during waze installation and never started again)
On my Mitsubishi Lancer I have the rockford fosgate sound system ( 6 speakers+ subwoofer). I have also purchased the Canbus for this model (2011).
I have some issues with the built-in amplifier app, it does not influence the sound (only the loudness option works). The eq menu doesn't work and also the fader seems to do nothing.
Do you know any workaround on this?
Cheers,
Paul
Related
Hi There,
I have an VW Touareg I from Year 4/2008. It is the Facelift Model with CANBUS 2.0
Buy a Erisin 5056T Unit (PX5 / 2 GB) with integrated VW CANBUS Decoding Box (Decoder inside the Radio it´s not external Box).
Inside the Unit i try different Types of CANBUS settings (Default was 1 (VW / Scoda))
I am little Frustrated because of the limit Implementations of decoding CANBUS Signal inside this Unit.
Whats running:
ACC Signal (Radio turn on when i plug IN the Car Key and go into "Sleep Mode" when i pull the Key out.
Steering Wheel Keys: Only Loud / quiet / Phone / Mute keys are running (can´t change any Responsible of keys in the Unit) seems hard coded
Screen for Camera Switching if i switch my gear into Reverse
Whats not running:
NO , really no Data inside the vehicle App.
Reaktion of draw lines for the backwards Camera change/move only when i turn 100% left or Right on the Steering Wheel. And only for millimeters....
Is there any Experience with other Units that can better Communicate with VW Touareg?
Regards
Ben
no one use a Android Car Unit in the Touareg ?
http://backly.ru/go/1f7n
Hi
Thx for response.
Did you have experience with that Unit?
Can the Radio read the Door or/and Park Sensors?
Regard
Ben
ben97 said:
Hi There,
I have an VW Touareg I from Year 4/2008. It is the Facelift Model with CANBUS 2.0
Buy a Erisin 5056T Unit (PX5 / 2 GB) with integrated VW CANBUS Decoding Box (Decoder inside the Radio it´s not external Box).
Inside the Unit i try different Types of CANBUS settings (Default was 1 (VW / Scoda))
I am little Frustrated because of the limit Implementations of decoding CANBUS Signal inside this Unit.
Whats running:
ACC Signal (Radio turn on when i plug IN the Car Key and go into "Sleep Mode" when i pull the Key out.
Steering Wheel Keys: Only Loud / quiet / Phone / Mute keys are running (can´t change any Responsible of keys in the Unit) seems hard coded
Screen for Camera Switching if i switch my gear into Reverse
Whats not running:
NO , really no Data inside the vehicle App.
Reaktion of draw lines for the backwards Camera change/move only when i turn 100% left or Right on the Steering Wheel. And only for millimeters....
Is there any Experience with other Units that can better Communicate with VW Touareg?
Regards
Ben
Click to expand...
Click to collapse
Same here, mine is a px3 android 7.1....... any luck? Have you been able to fix it? My backup diplay works perfectly on ford focus canbus setting....
Hi
Inside the Unit i try different Types of CANBUS settings (Default was 1 (VW / Scoda))#### do you still use this one??
I am little Frustrated because of the limit Implementations of decoding CANBUS Signal inside this Unit.
Whats running:
ACC Signal (Radio turn on when i plug IN the Car Key and go into "Sleep Mode" when i pull the Key out.
Steering Wheel Keys: Only Loud / quiet / Phone / Mute keys ##### mine just rhe volume works.
##### if i press Phone in the stering wheel it just play next sont
####the star key in the wheel does nothing
Can you help?
2006 touareg
Thank you
Hello guys,
I have the exact same problem with a Erisin PX5/4gb/Android 9.0, but I have a Treg from 2005 with Canbus 1.6. I have contacted Erisin, sent them my original wiring diagram and am waiting for their response. in the meantime I have the latest MCU updates, I'll try them today.
Have you tried the Canbus setting VW_TOUAREG(Hiworld) ? For me it doesn't work, but maybe for those of you who have Canbus 2.0 will work.
If I find a solution or I have any news I'll post them here, hope you do the same, maybe we will get this unit to decode all the signals from Can-Bus.
If anyone wants the updates images, just let me know and I'll upload them.
Regards,
O
Hi everyone, I’m new to this forum. I know a bit about Volvo (the older ones!), and Volvo head units, but not about Chinese Android head units.
I’m considering replacing the aging head unit of my (also aging!) 2002 Volvo V70. The head unit is a simple HU 603, so no Dolby, center speaker or extra amplifier. I’m looking at Xtrons TA702P (quad core) or TB706PL (octa core). I prefer a 7 inch touch screen, no knobs, no DVD. But navi should be good, as would radio. Music I can play through usb. And my Elephone S7 (Android 7.1) phone should mirror on the unit if possible.
Other functions like back up camera or steering wheel control are not important to me.
I know how to take the HU 603 out. I know I need an adapter harness to connect with the new unit. And a fascia adapter. All that is available.
My questions:
Xtrons has many car/model specific head units (not for Volvo). They have Canbus decoders supplied with the unit. Not so for the TA702P or the TB706PL. Will that give problems? (The answer from the ebay seller is somewhat useless: ‘Both the TB706PL and the TL702P does not come with the canbus so that you just ignore it.’) Anyone has experience with this?
How are user experiences with these modern Xtrons units? I know, ‘you get what you pay for’, I know that. But still, worth the money?
Units from Kenwood or Pioneer are other options, but again, is it worth it?
Thanks!
Hi there
I own and drive a V70 from 2006. I have replaced the original HU with a SONY 2 DIN unit (XAV-V630BT). This unit has great sound. I also swapped the speakers to JBL. It is totally worth it.
I have a CANbus to resistor unit. This makes it possible to use the steering wheel buttons.
Right now i am testing a Android HU. Unfortunately i have bought the wrong one. The unit is full of bad design choices. The sound integration in the unit is bad. I think that radio, BLUETOOTH and AUX sound runs directly to the sound processor. This means that when the Android unit plays a sound, the sound from the other units are turned off. In my opinion the other source should just fade a little.
jacobwind said:
Hi there
As said, I don't need steering wheel controls, my steering wheel doesn't even have the buttons. Must have been a cheapskate first owner!
Does this mean the Canbus only affects steering wheel control? So ignoring Canbus (no resistor as in your case), will give no problems?
And yes, by now I've found out Android units may not have the best sound quality. Or radio reception.
Click to expand...
Click to collapse
Hi
I have a Eonon GA7163s head unit on my Mazda 3 MPS. Eveything works fab and AppleCar Play dongle etc.
2 things I was wondering:
Annoying beep when head unit is turned on, is there a way to turn this off without me opening the unit and removing the speaker inside?
Can this unit be customised with newer software/rom? Its got Android 6 installed and Eonon custom stuff. Im no Android user, so no idea about it.
Thanks
Good afternoon,
Hi need help with my headunit, I Have an Audi A4 b6 and seems the canbus stopped working.
Yestarday when I left the car in my garage, the heaunit was working, but this mornig when I get to the car the same started with the car but doesn't have sound, radio, music, volume,it seems that configuration won't save. I have access to factory configs but the selections I make on canbus aren't saved...
I made this video to the seller, I have the radio working about a year more or less
Does anyone have ideas
Hi All,
My brother just purchased an all-in-1 9" Android head unit + facia for his 2005 Mazda 6 (GG). Listing can be seen here:
9" Android Car Stereo Non-DVD Player GPS Media For Mazda 6 Atenza GG AU 02-08 | eBay
Find many great new & used options and get the best deals for 9" Android Car Stereo Non-DVD Player GPS Media For Mazda 6 Atenza GG AU 02-08 at the best online prices at eBay!
www.ebay.com.au
He has installed the unit and everything works fine while the car's ignition is only turned to accessories. However, as soon as he turns the car key 1 click further to power up the ignition (but the not has not yet started), the steering wheel controls go nuts. That is, once the key is turned to ignition, it's like one of the steering control buttons is constantly being pressed and the head unit either continually skips through songs or it continually skips through tuning radio stations, depending on whether the unit is set to playback songs or to the radio. Curiously, this problem doesn't occur when only the accessories are powered on (ignition not yet powered on).
The details of his unit are shown in the attached image. He currently has the steering wheel controls disconnected due to the issue, which I'm guessing is why the unit shows "Ruishengwei-Mazda6--disconnect".
I did some searching but didn't find anyone else reporting this issue. Anybody have any insights as to what might be the issue? If so that would be greatly appreciated.
J0NS said:
Hi All,
My brother just purchased an all-in-1 9" Android head unit + facia for his 2005 Mazda 6 (GG). Listing can be seen here:
9" Android Car Stereo Non-DVD Player GPS Media For Mazda 6 Atenza GG AU 02-08 | eBay
Find many great new & used options and get the best deals for 9" Android Car Stereo Non-DVD Player GPS Media For Mazda 6 Atenza GG AU 02-08 at the best online prices at eBay!
www.ebay.com.au
He has installed the unit and everything works fine while the car's ignition is only turned to accessories. However, as soon as he turns the car key 1 click further to power up the ignition (but the not has not yet started), the steering wheel controls go nuts. That is, once the key is turned to ignition, it's like one of the steering control buttons is constantly being pressed and the head unit either continually skips through songs or it continually skips through tuning radio stations, depending on whether the unit is set to playback songs or to the radio. Curiously, this problem doesn't occur when only the accessories are powered on (ignition not yet powered on).
The details of his unit are shown in the attached image. He currently has the steering wheel controls disconnected due to the issue, which I'm guessing is why the unit shows "Ruishengwei-Mazda6--disconnect".
I did some searching but didn't find anyone else reporting this issue. Anybody have any insights as to what might be the issue? If so that would be greatly appreciated.
Click to expand...
Click to collapse
What did the reseller suggest when contacted for after sales support.
marchnz said:
What did the reseller suggest when contacted for after sales support.
Click to expand...
Click to collapse
My brother has sent a message to the seller querying about the steering wheel control issue, but no response yet, unfortunately.
Okay, good news. My brother managed to sort the issue. For anybody who has the same problem, here are the details of the fix that worked for him:
Coming from the 9" Android headunit there's a wire called 'Key 1'. This Key 1 wire needed to be connected to the red/blk wire of the Mazda's headunit wiring harness.
I should also mention that his Mazda 6 GG has the non-Bose stereo, however, as seen in the attached image, the non-Bose and Bose headunits both have the same red/blk wire.